Metadata-Version: 1.1
Name: yapf
Version: 0.13.1
Summary: A formatter for Python code.
Home-page: UNKNOWN
Author: Bill Wendling
Author-email: morbo@google.com
License: Apache License, Version 2.0
Description: ====
        YAPF
        ====
        
        .. image:: https://badge.fury.io/py/yapf.svg
            :target: http://badge.fury.io/py/yapf
            :alt: PyPI version
        
        .. image:: https://travis-ci.org/google/yapf.svg?branch=master
            :target: https://travis-ci.org/google/yapf
            :alt: Build status
        
        .. image:: https://coveralls.io/repos/google/yapf/badge.svg?branch=master
            :target: https://coveralls.io/r/google/yapf?branch=master
            :alt: Coverage status
        
        
        Introduction
        ============
        
        Most of the current formatters for Python --- e.g., autopep8, and pep8ify ---
        are made to remove lint errors from code. This has some obvious limitations.
        For instance, code that conforms to the PEP 8 guidelines may not be
        reformatted.  But it doesn't mean that the code looks good.
        
        YAPF takes a different approach. It's based off of 'clang-format', developed by
        Daniel Jasper. In essence, the algorithm takes the code and reformats it to the
        best formatting that conforms to the style guide, even if the original code
        didn't violate the style guide. The idea is also similar to the 'gofmt' tool for
        the Go programming language: end all holy wars about formatting - if the whole
        codebase of a project is simply piped through YAPF whenever modifications are
        made, the style remains consistent throughout the project and there's no point
        arguing about style in every code review.
        
        The ultimate goal is that the code YAPF produces is as good as the code that a
        programmer would write if they were following the style guide. It takes away
        some of the drudgery of maintaining your code.
        
        .. footer::
        
            YAPF is not an official Google product (experimental or otherwise), it is
            just code that happens to be owned by Google.
        
        .. contents::
        
        
        Installation
        ============
        
        To install YAPF from PyPI:
        
        .. code-block::
        
            $ pip install yapf
        
        YAPF is still considered in "alpha" stage, and the released version may change
        often; therefore, the best way to keep up-to-date with the latest development
        is to clone this repository.
        
        Note that if you intend to use YAPF as a command-line tool rather than as a
        library, installation is not necessary. YAPF supports being run as a directory
        by the Python interpreter. If you cloned/unzipped YAPF into ``DIR``, it's
        possible to run:
        
        .. code-block::
        
            $ PYTHONPATH=DIR python DIR/yapf [options] ...
        
        
        Python versions
        ===============
        
        YAPF supports Python 2.7 and 3.4.1+.
        
        YAPF requires the code it formats to be valid Python for the version YAPF itself
        runs under. Therefore, if you format Python 3 code with YAPF, run YAPF itself
        under Python 3 (and similarly for Python 2).
        
        
        Usage
        =====
        
        Options::
        
            usage: yapf [-h] [-v] [-d | -i] [-r | -l START-END] [-e PATTERN]
                        [--style STYLE] [--style-help] [--no-local-style]
                        [files [files ...]]
        
            Formatter for Python code.
        
            positional arguments:
              files
        
            optional arguments:
              -h, --help            show this help message and exit
              -v, --version         show version number and exit
              -d, --diff            print the diff for the fixed source
              -i, --in-place        make changes to files in place
              -r, --recursive       run recursively over directories
              -l START-END, --lines START-END
                                    range of lines to reformat, one-based
              -e PATTERN, --exclude PATTERN
                                    patterns for files to exclude from formatting
              --style STYLE         specify formatting style: either a style name (for
                                    example "pep8" or "google"), or the name of a file
                                    with style settings. The default is pep8 unless a
                                    .style.yapf or setup.cfg file located in one of the
                                    parent directories of the source file (or current
                                    directory for stdin)
              --style-help          show style settings and exit
              --no-local-style      don't search for local style definition (.style.yapf)
        
        
        Formatting style
        ================
        
        The formatting style used by YAPF is configurable and there are many "knobs"
        that can be used to tune how YAPF does formatting. See the ``style.py`` module
        for the full list.
        
        To control the style, run YAPF with the ``--style`` argument. It accepts one of
        the predefined styles (e.g., ``pep8`` or ``google``), a path to a configuration
        file that specifies the desired style, or a dictionary of key/value pairs.
        
        The config file is a simple listing of (case-insensitive) ``key = value`` pairs
        with a ``[style]`` heading. For example:
        
        .. code-block::
        
            [style]
            based_on_style = pep8
            spaces_before_comment = 4
            split_before_logical_operator = true
        
        The ``based_on_style`` setting determines which of the predefined styles this
        custom style is based on (think of it like subclassing).
        
        It's also possible to do the same on the command line with a dictionary. For
        example:
        
        .. code-block::
        
            --style='{based_on_style: chromium, indent_width: 4}'
        
        This will take the ``chromium`` base style and modify it to have four space
        indentations.
        
        YAPF will search for the formatting style in the following manner:
        
        1. Specified on the command line
        2. In the `[style]` section of a `.style.yapf` file in either the current
           directory or one of its parent directories.
        3. In the `[yapf]` section of a `setup.cfg` file in either the current
           directory or one of its parent directories.
        4. In the `~/.config/yapf/style` file in your home directory.
        
        If none of those files are found, the default style is used (PEP8).
        
        
        Example
        =======
        
        An example of the type of formatting that YAPF can do, it will take this ugly
        code:
        
        .. code-block:: python
        
            x = {  'a':37,'b':42,
        
            'c':927}
        
            y = 'hello ''world'
            z = 'hello '+'world'
            a = 'hello {}'.format('world')
            class foo  (     object  ):
              def f    (self   ):
                return       37*-+2
              def g(self, x,y=42):
                  return y
            def f  (   a ) :
              return      37+-+a[42-x :  y**3]
        
        and reformat it into:
        
        .. code-block:: python
        
            x = {'a': 37, 'b': 42, 'c': 927}
        
            y = 'hello ' 'world'
            z = 'hello ' + 'world'
            a = 'hello {}'.format('world')
        
        
            class foo(object):
                def f(self):
                    return 37 * -+2
        
                def g(self, x, y=42):
                    return y
        
        
            def f(a):
                return 37 + -+a[42 - x:y**3]
        
        
        Example as a module
        ===================
        
        The two main APIs for calling yapf are ``FormatCode`` and ``FormatFile``, these
        share several arguments which are described below:
        
        .. code-block:: python
        
            >>> from yapf.yapf_api import FormatCode  # reformat a string of code
        
            >>> FormatCode("f ( a = 1, b = 2 )")
            'f(a=1, b=2)\n'
        
        A ``style_config`` argument: Either a style name or a path to a file that contains
        formatting style settings. If None is specified, use the default style
        as set in ``style.DEFAULT_STYLE_FACTORY``.
        
        .. code-block:: python
        
            >>> FormatCode("def g():\n  return True", style_config='pep8')
            'def g():\n    return True\n'
        
        A ``lines`` argument: A list of tuples of lines (ints), [start, end],
        that we want to format. The lines are 1-based indexed. It can be used by
        third-party code (e.g., IDEs) when reformatting a snippet of code rather
        than a whole file.
        
        .. code-block:: python
        
            >>> FormatCode("def g( ):\n    a=1\n    b = 2\n    return a==b", lines=[(1, 1), (2, 3)])
            'def g():\n    a = 1\n    b = 2\n    return a==b\n'
        
        A ``print_diff`` (bool): Instead of returning the reformatted source, return a
        diff that turns the formatted source into reformatter source.
        
        .. code-block:: python
        
            >>> print(FormatCode("a==b", filename="foo.py", print_diff=True))
            --- foo.py (original)
            +++ foo.py (reformatted)
            @@ -1 +1 @@
            -a==b
            +a == b
        
        Note: the ``filename`` argument for ``FormatCode`` is what is inserted into
        the diff, the default is ``<unknown>``.
        
        ``FormatFile`` returns reformatted code from the passed file along with its encoding:
        
        .. code-block:: python
        
            >>> from yapf.yapf_api import FormatFile  # reformat a file
        
            >>> print(open("foo.py").read())  # contents of file
            a==b
        
            >>> FormatFile("foo.py")
            ('a == b\n', 'utf-8')
        
        The ``in-place`` argument saves the reformatted code back to the file:
        
        .. code-block:: python
        
            >>> FormatFile("foo.py", in_place=True)
            (None, 'utf-8')
        
            >>> print(open("foo.py").read())  # contents of file (now fixed)
            a == b
        
        
        Knobs
        =====
        
        ``ALIGN_CLOSING_BRACKET_WITH_VISUAL_INDENT``
            Align closing bracket with visual indentation.
        
        ``ALLOW_MULTILINE_LAMBDAS``
            Allow lambdas to be formatted on more than one line.
        
        ``BLANK_LINE_BEFORE_NESTED_CLASS_OR_DEF``
            Insert a blank line before a ``def`` or ``class`` immediately nested within
            another ``def`` or ``class``. For example:
        
            .. code-block:: python
        
                class Foo:
                                   # <------ this blank line
                    def method():
                        pass
        
        ``COALESCE_BRACKETS``
            Do not split consecutive brackets. Only relevant when
            ``DEDENT_CLOSING_BRACKETS`` is set. For example:
        
            .. code-block:: python
        
                call_func_that_takes_a_dict(
                    {
                        'key1': 'value1',
                        'key2': 'value2',
                    }
                )
        
            would reformat to:
        
            .. code-block:: python
        
                call_func_that_takes_a_dict({
                    'key1': 'value1',
                    'key2': 'value2',
                })
        
        
        ``COLUMN_LIMIT``
            The column limit (or max line-length)
        
        ``CONTINUATION_INDENT_WIDTH``
            Indent width used for line continuations.
        
        ``DEDENT_CLOSING_BRACKETS``
            Put closing brackets on a separate line, dedented, if the bracketed
            expression can't fit in a single line. Applies to all kinds of brackets,
            including function definitions and calls. For example:
        
            .. code-block:: python
        
                config = {
                    'key1': 'value1',
                    'key2': 'value2',
                }  # <--- this bracket is dedented and on a separate line
        
                time_series = self.remote_client.query_entity_counters(
                    entity='dev3246.region1',
                    key='dns.query_latency_tcp',
                    transform=Transformation.AVERAGE(window=timedelta(seconds=60)),
                    start_ts=now()-timedelta(days=3),
                    end_ts=now(),
                )  # <--- this bracket is dedented and on a separate line
        
        ``I18N_COMMENT``
            The regex for an internationalization comment. The presence of this comment
            stops reformatting of that line, because the comments are required to be
            next to the string they translate.
        
        ``I18N_FUNCTION_CALL``
            The internationalization function call names. The presence of this function
            stops reformatting on that line, because the string it has cannot be moved
            away from the i18n comment.
        
        ``INDENT_DICTIONARY_VALUE``
            Indent the dictionary value if it cannot fit on the same line as the
            dictionary key. For example:
        
            .. code-block:: python
        
                config = {
                    'key1':
                        'value1',
                    'key2': value1 +
                            value2,
                }
        
        ``INDENT_WIDTH``
            The number of columns to use for indentation.
        
        ``JOIN_MULTIPLE_LINES``
            Join short lines into one line. E.g., single line ``if`` statements.
        
        ``SPACES_AROUND_POWER_OPERATOR``
            Set to ``True`` to prefer using spaces around ``**``.
        
        ``SPACES_AROUND_DEFAULT_OR_NAMED_ASSIGN``
            Set to ``True`` to prefer spaces around the assignment operator for default
            or keyword arguments.
        
        ``SPACES_BEFORE_COMMENT``
            The number of spaces required before a trailing comment.
        
        ``SPACE_BETWEEN_ENDING_COMMA_AND_CLOSING_BRACKET``
            Insert a space between the ending comma and closing bracket of a list, etc.
        
        ``SPLIT_ARGUMENTS_WHEN_COMMA_TERMINATED``
            Split before arguments if the argument list is terminated by a comma.
        
        ``SPLIT_BEFORE_BITWISE_OPERATOR``
            Set to ``True`` to prefer splitting before ``&``, ``|`` or ``^`` rather
            than after.
        
        ``SPLIT_BEFORE_FIRST_ARGUMENT``
            If an argument / parameter list is going to be split, then split before the
            first argument.
        
        ``SPLIT_BEFORE_LOGICAL_OPERATOR``
            Set to ``True`` to prefer splitting before ``and`` or ``or`` rather than
            after.
        
        ``SPLIT_BEFORE_NAMED_ASSIGNS``
            Split named assignments onto individual lines.
        
        ``SPLIT_PENALTY_AFTER_OPENING_BRACKET``
            The penalty for splitting right after the opening bracket.
        
        ``SPLIT_PENALTY_AFTER_UNARY_OPERATOR``
            The penalty for splitting the line after a unary operator.
        
        ``SPLIT_PENALTY_BEFORE_IF_EXPR``
            The penalty for splitting right before an ``if`` expression.
        
        ``SPLIT_PENALTY_BITWISE_OPERATOR``
            The penalty of splitting the line around the ``&``, ``|``, and ``^``
            operators.
        
        ``SPLIT_PENALTY_EXCESS_CHARACTER``
            The penalty for characters over the column limit.
        
        ``SPLIT_PENALTY_FOR_ADDED_LINE_SPLIT``
            The penalty incurred by adding a line split to the unwrapped line. The more
            line splits added the higher the penalty.
        
        ``SPLIT_PENALTY_IMPORT_NAMES``
            The penalty of splitting a list of ``import as`` names. For example:
        
            .. code-block:: python
        
              from a_very_long_or_indented_module_name_yada_yad import (long_argument_1,
                                                                        long_argument_2,
                                                                        long_argument_3)
        
            would reformat to something like:
        
            .. code-block:: python
        
              from a_very_long_or_indented_module_name_yada_yad import (
                  long_argument_1, long_argument_2, long_argument_3)
        
        ``SPLIT_PENALTY_LOGICAL_OPERATOR``
            The penalty of splitting the line around the ``and`` and ``or`` operators.
        
        ``USE_TABS``
            Use the Tab character for indentation.
        
        (Potentially) Frequently Asked Questions
        ========================================
        
        Why does YAPF destroy my awesome formatting?
        --------------------------------------------
        
        YAPF tries very hard to get the formatting correct. But for some code, it won't
        be as good as hand-formatting. In particular, large data literals may become
        horribly disfigured under YAPF.
        
        The reason for this is many-fold. But in essence YAPF is simply a tool to help
        with development. It will format things to coincide with the style guide, but
        that may not equate with readability.
        
        What can be done to alleviate this situation is to indicate regions YAPF should
        ignore when reformatting something:
        
        .. code-block:: python
        
            # yapf: disable
            FOO = {
                # ... some very large, complex data literal.
            }
        
            BAR = [
                # ... another large data literal.
            ]
            # yapf: enable
        
        You can also disable formatting for a single literal like this:
        
        .. code-block:: python
        
            BAZ = {
                (1, 2, 3, 4),
                (5, 6, 7, 8),
                (9, 10, 11, 12),
            }  # yapf: disable
        
        To preserve the nice dedented closing brackets, use the
        ``dedent_closing_brackets`` in your style. Note that in this case all
        brackets, including function definitions and calls, are going to use
        that style.  This provides consistency across the formatted codebase.
        
        Why Not Improve Existing Tools?
        -------------------------------
        
        We wanted to use clang-format's reformatting algorithm. It's very powerful and
        designed to come up with the best formatting possible. Existing tools were
        created with different goals in mind, and would require extensive modifications
        to convert to using clang-format's algorithm.
        
        Can I Use YAPF In My Program?
        -----------------------------
        
        Please do! YAPF was designed to be used as a library as well as a command line
        tool. This means that a tool or IDE plugin is free to use YAPF.
        
        
        Gory Details
        ============
        
        Algorithm Design
        ----------------
        
        The main data structure in YAPF is the ``UnwrappedLine`` object. It holds a list
        of ``FormatToken``\s, that we would want to place on a single line if there were
        no column limit. An exception being a comment in the middle of an expression
        statement will force the line to be formatted on more than one line. The
        formatter works on one ``UnwrappedLine`` object at a time.
        
        An ``UnwrappedLine`` typically won't affect the formatting of lines before or
        after it. There is a part of the algorithm that may join two or more
        ``UnwrappedLine``\s into one line. For instance, an if-then statement with a
        short body can be placed on a single line:
        
        .. code-block:: python
        
            if a == 42: continue
        
        YAPF's formatting algorithm creates a weighted tree that acts as the solution
        space for the algorithm. Each node in the tree represents the result of a
        formatting decision --- i.e., whether to split or not to split before a token.
        Each formatting decision has a cost associated with it. Therefore, the cost is
        realized on the edge between two nodes. (In reality, the weighted tree doesn't
        have separate edge objects, so the cost resides on the nodes themselves.)
        
        For example, take the following Python code snippet. For the sake of this
        example, assume that line (1) violates the column limit restriction and needs to
        be reformatted.
        
        .. code-block:: python
        
            def xxxxxxxxxxx(aaaaaaaaaaaa, bbbbbbbbb, cccccccc, dddddddd, eeeeee):  # 1
                pass                                                               # 2
        
        For line (1), the algorithm will build a tree where each node (a
        ``FormattingDecisionState`` object) is the state of the line at that token given
        the decision to split before the token or not. Note: the ``FormatDecisionState``
        objects are copied by value so each node in the graph is unique and a change in
        one doesn't affect other nodes.
        
        Heuristics are used to determine the costs of splitting or not splitting.
        Because a node holds the state of the tree up to a token's insertion, it can
        easily determine if a splitting decision will violate one of the style
        requirements. For instance, the heuristic is able to apply an extra penalty to
        the edge when not splitting between the previous token and the one being added.
        
        There are some instances where we will never want to split the line, because
        doing so will always be detrimental (i.e., it will require a backslash-newline,
        which is very rarely desirable). For line (1), we will never want to split the
        first three tokens: ``def``, ``xxxxxxxxxxx``, and ``(``. Nor will we want to
        split between the ``)`` and the ``:`` at the end. These regions are said to be
        "unbreakable." This is reflected in the tree by there not being a "split"
        decision (left hand branch) within the unbreakable region.
        
        Now that we have the tree, we determine what the "best" formatting is by finding
        the path through the tree with the lowest cost.
        
        And that's it!
        
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Environment :: Console
Classifier: Intended Audience :: Developers
Classifier: License :: OSI Approved :: Apache Software License
Classifier: Operating System :: OS Independent
Classifier: Programming Language :: Python
Classifier: Programming Language :: Python :: 2
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3.4
Classifier: Programming Language :: Python :: 3.5
Classifier: Topic :: Software Development :: Libraries :: Python Modules
Classifier: Topic :: Software Development :: Quality Assurance
