System.Cmd.Utils

MissingH-1.4.0.1: Large utility library

Copyright | Copyright (C) 2004-2011 John Goerzen
License | BSD3
Maintainer | John Goerzen <jgoerzen@complete.org>
Stability | provisional
Portability | portable to platforms with POSIX process\/signal tools
Safe Haskell | None
Language | Haskell98

System.Cmd.Utils

Contents

- High-Level Tools
  - Piping with lazy strings
  - Piping with handles
- Low-Level Tools

Description

Command invocation utilities.

Written by John Goerzen, jgoerzen@complete.org

Please note: Most of this module is not compatible with Hugs.

Command lines executed will be logged using System.Log.Logger at the DEBUG level. Failure messages will be logged at the WARNING level in addition to being raised as an exception. Both are logged under "System.Cmd.Utils.funcname" -- for instance, "System.Cmd.Utils.safeSystem". If you wish to suppress these messages globally, you can simply run:

    updateGlobalLogger "System.Cmd.Utils.safeSystem"
                        (setLevel CRITICAL)

See also: `updateGlobalLogger`, System.Log.Logger.

It is possible to set up pipelines with these utilities. Example:

    (pid1, x1) <- pipeFrom "ls" ["/etc"]
    (pid2, x2) <- pipeBoth "grep" ["x"] x1
    putStr x2
    ... the grep output is displayed ...
    forceSuccess pid2
    forceSuccess pid1

Remember, when you use the functions that return a String, you must not call `forceSuccess` until after all data from the String has been consumed. Failure to wait will cause your program to appear to hang.

Here is an example of the wrong way to do it:

    (pid, x) <- pipeFrom "ls" ["/etc"]
    forceSuccess pid         -- Hangs; the called program hasn't terminated yet
    processTheData x

You must instead process the data before calling `forceSuccess`.

When using the hPipe family of functions, this is probably more obvious.

Most of this module will be incompatible with Windows.

Synopsis

- data PipeHandle = PipeHandle {
  - processID :: ProcessID
  - phCommand :: FilePath
  - phArgs :: [String]
  - phCreator :: String
  }
- safeSystem :: FilePath -> [String] -> IO ()
- forceSuccess :: PipeHandle -> IO ()
- posixRawSystem :: FilePath -> [String] -> IO ProcessStatus
- forkRawSystem :: FilePath -> [String] -> IO ProcessID
- pipeFrom :: FilePath -> [String] -> IO (PipeHandle, String)
- pipeLinesFrom :: FilePath -> [String] -> IO (PipeHandle, [String])
- pipeTo :: FilePath -> [String] -> String -> IO PipeHandle
- pipeBoth :: FilePath -> [String] -> String -> IO (PipeHandle, String)
- hPipeFrom :: FilePath -> [String] -> IO (PipeHandle, Handle)
- hPipeTo :: FilePath -> [String] -> IO (PipeHandle, Handle)
- hPipeBoth :: FilePath -> [String] -> IO (PipeHandle, Handle, Handle)
- data PipeMode
  - = ReadFromPipe
  - | WriteToPipe
- pOpen :: PipeMode -> FilePath -> [String] -> (Handle -> IO a) -> IO a
- pOpen3 :: Maybe Fd -> Maybe Fd -> Maybe Fd -> FilePath -> [String] -> (ProcessID -> IO a) -> IO () -> IO a
- pOpen3Raw :: Maybe Fd -> Maybe Fd -> Maybe Fd -> FilePath -> [String] -> IO () -> IO ProcessID

# High-Level Tools

data PipeHandle #

Return value from `pipeFrom`, `pipeLinesFrom`, `pipeTo`, or `pipeBoth`. Contains both a ProcessID and the original command that was executed. If you prefer not to use `forceSuccess` on the result of one of these pipe calls, you can use (processID ph), assuming ph is your `PipeHandle`, as a parameter to `getProcessStatus`.

Constructors

PipeHandle |
Fields processID :: ProcessID phCommand :: FilePath phArgs :: [String] phCreator :: String Function that created it

Instances

Eq PipeHandle # |
Methods (==) :: PipeHandle -> PipeHandle -> Bool # (/=) :: PipeHandle -> PipeHandle -> Bool #
Show PipeHandle # |
Methods showsPrec :: Int -> PipeHandle -> ShowS # show :: PipeHandle -> String # showList :: [PipeHandle] -> ShowS #

safeSystem :: FilePath -> [String] -> IO () #

Invokes the specified command in a subprocess, waiting for the result. If the command terminated successfully, return normally. Otherwise, raises a userError with the problem.

Implemented in terms of `posixRawSystem` where supported, and System.Posix.rawSystem otherwise.

forceSuccess :: PipeHandle -> IO () #

Uses `getProcessStatus` to obtain the exit status of the given process ID. If the process terminated normally, does nothing. Otherwise, raises an exception with an appropriate error message.

This call will block waiting for the given pid to terminate.

Not available on Windows.

posixRawSystem :: FilePath -> [String] -> IO ProcessStatus #

Invokes the specified command in a subprocess, waiting for the result. Return the result status. Never raises an exception. Only available on POSIX platforms.

Like system(3), this command ignores SIGINT and SIGQUIT and blocks SIGCHLD during its execution.

Logs as System.Cmd.Utils.posixRawSystem

forkRawSystem :: FilePath -> [String] -> IO ProcessID #

Invokes the specified command in a subprocess, without waiting for the result. Returns the PID of the subprocess -- it is YOUR responsibility to use getProcessStatus or getAnyProcessStatus on that at some point. Failure to do so will lead to resource leakage (zombie processes).

This function does nothing with signals. That too is up to you.

Logs as System.Cmd.Utils.forkRawSystem

## Piping with lazy strings

pipeFrom :: FilePath -> [String] -> IO (PipeHandle, String) #

Read data from a pipe. Returns a lazy string and a `PipeHandle`.

ONLY AFTER the string has been read completely, You must call either `getProcessStatus` or `forceSuccess` on the `PipeHandle`. Zombies will result otherwise.

Not available on Windows.

pipeLinesFrom :: FilePath -> [String] -> IO (PipeHandle, [String]) #

Like `pipeFrom`, but returns data in lines instead of just a String. Shortcut for calling lines on the result from `pipeFrom`.

Note: this function logs as pipeFrom.

Not available on Windows.

pipeTo :: FilePath -> [String] -> String -> IO PipeHandle #

Write data to a pipe. Returns a ProcessID.

You must call either `getProcessStatus` or `forceSuccess` on the ProcessID. Zombies will result otherwise.

Not available on Windows.

pipeBoth :: FilePath -> [String] -> String -> IO (PipeHandle, String) #

Like a combination of `pipeTo` and `pipeFrom`; forks an IO thread to send data to the piped program, and simultaneously returns its output stream.

The same note about checking the return status applies here as with `pipeFrom`.

Not available on Windows.

## Piping with handles

hPipeFrom :: FilePath -> [String] -> IO (PipeHandle, Handle) #

Read data from a pipe. Returns a Handle and a `PipeHandle`.

When done, you must hClose the handle, and then use either `forceSuccess` or getProcessStatus on the `PipeHandle`. Zombies will result otherwise.

This function logs as pipeFrom.

Not available on Windows or with Hugs.

hPipeTo :: FilePath -> [String] -> IO (PipeHandle, Handle) #

Write data to a pipe. Returns a `PipeHandle` and a new Handle to write to.

When done, you must hClose the handle, and then use either `forceSuccess` or getProcessStatus on the `PipeHandle`. Zombies will result otherwise.

This function logs as pipeTo.

Not available on Windows.

hPipeBoth :: FilePath -> [String] -> IO (PipeHandle, Handle, Handle) #

Like a combination of `hPipeTo` and `hPipeFrom`; returns a 3-tuple of (`PipeHandle`, Data From Pipe, Data To Pipe).

When done, you must hClose both handles, and then use either `forceSuccess` or getProcessStatus on the `PipeHandle`. Zombies will result otherwise.

Hint: you will usually need to ForkIO a thread to handle one of the Handles; otherwise, deadlock can result.

This function logs as pipeBoth.

Not available on Windows.

# Low-Level Tools

data PipeMode #

Constructors

ReadFromPipe |
WriteToPipe |

pOpen :: PipeMode -> FilePath -> [String] -> (Handle -> IO a) -> IO a #

Open a pipe to the specified command.

Passes the handle on to the specified function.

The `PipeMode` specifies what you will be doing. That is, specifing `ReadFromPipe` sets up a pipe from stdin, and `WriteToPipe` sets up a pipe from stdout.

Not available on Windows.

pOpen3 #

Arguments

:: Maybe Fd | Send stdin to this fd
-> Maybe Fd | Get stdout from this fd
-> Maybe Fd | Get stderr from this fd
-> FilePath | Command to run
-> [String] | Command args
-> (ProcessID -> IO a) | Action to run in parent
-> IO () | Action to run in child before execing (if you don't need something, set this to `return ()`) -- IGNORED IN HUGS
-> IO a |

Runs a command, redirecting things to pipes.

Not available on Windows.

Note that you may not use the same fd on more than one item. If you want to redirect stdout and stderr, dup it first.

pOpen3Raw #

Arguments

:: Maybe Fd | Send stdin to this fd
-> Maybe Fd | Get stdout from this fd
-> Maybe Fd | Get stderr from this fd
-> FilePath | Command to run
-> [String] | Command args
-> IO () | Action to run in child before execing (if you don't need something, set this to `return ()`) -- IGNORED IN HUGS
-> IO ProcessID |

Runs a command, redirecting things to pipes.

Not available on Windows.

Returns immediately with the PID of the child. Using `waitProcess` on it is YOUR responsibility!

Note that you may not use the same fd on more than one item. If you want to redirect stdout and stderr, dup it first.