autoconnect |
boolean |
TRUE |
Whether or not the connection should be automatically connected by NetworkManager when the resources for the connection are available. TRUE to automatically activate the connection, FALSE to require manual intervention to activate the connection. |
autoconnect-priority |
int32 |
0 |
The autoconnect priority. If the connection is set to autoconnect, connections with higher priority will be preferred. Defaults to 0. The higher number means higher priority. |
autoconnect-retries |
int32 |
-1 |
The number of times a connection should be tried when autoctivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). |
autoconnect-slaves |
NMSettingConnectionAutoconnectSlaves (int32) |
|
Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0. |
gateway-ping-timeout |
uint32 |
0 |
If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping. |
id |
string |
|
A human readable unique identifier for the connection, like "Work Wi-Fi" or "T-Mobile 3G". |
interface-name |
string |
|
The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface. |
lldp |
int32 |
-1 |
Whether LLDP is enabled for the connection. |
master |
string |
|
Interface name of the master device or UUID of the master connection. |
metered |
NMMetered (int32) |
|
Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately. |
name |
string |
connection |
The setting's name, which uniquely identifies the setting within the connection. Each setting type has a name unique to that type, for example "ppp" or "wireless" or "wired". |
permissions |
array of string |
[] |
An array of strings defining what access a given user has to this connection. If this is NULL or empty, all users are allowed to access this connection. Otherwise a user is allowed to access this connection if and only if they are in this list. Each entry is of the form "[type]:[id]:[reserved]"; for example, "user:dcbw:blah". At this time only the "user" [type] is allowed. Any other values are ignored and reserved for future use. [id] is the username that this permission refers to, which may not contain the ":" character. Any [reserved] information present must be ignored and is reserved for future use. All of [type], [id], and [reserved] must be valid UTF-8. |
read-only |
boolean |
FALSE |
FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified. |
secondaries |
array of string |
[] |
List of connection UUIDs that should be activated when the base connection itself is activated. Currently only VPN connections are supported. |
slave-type |
string |
|
Setting name of the device type of this slave's master connection (eg, "bond"), or NULL if this connection is not a slave. |
stable-id |
string |
|
Token to generate stable IDs for the connection. The stable-id is used for generating IPv6 stable private addresses with ipv6.addr-gen-mode=stable-privacy. It is also used to seed the generated cloned MAC address for ethernet.cloned-mac-address=stable and wifi.cloned-mac-address=stable. Note that also the interface name of the activating connection and a per-host secret key is included into the address generation so that the same stable-id on different hosts/devices yields different addresses. If the value is unset, an ID unique for the connection is used. Specifing a stable-id allows multiple connections to generate the same addresses. Another use is to generate IDs at runtime via dynamic substitutions. The '$' character is treated special to perform dynamic substitutions at runtime. Currently supported are "${CONNECTION}", "${BOOT}", "${RANDOM}". These effectively create unique IDs per-connection, per-boot, or every time. Any unrecognized patterns following '$' are treated verbatim, however are reserved for future use. You are thus advised to avoid '$' or escape it as "$$". For example, set it to "${CONNECTION}/${BOOT}" to create a unique id for this connection that changes with every reboot. Note that two connections only use the same effective id if their stable-id is also identical before performing dynamic substitutions. |
timestamp |
uint64 |
0 |
The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved). |
type |
string |
|
Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, "802-3-ethernet" or "802-11-wireless" or "bluetooth", etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, "vpn" or "bridge", etc). |
uuid |
string |
|
A universally unique identifier for the connection, for example generated with libuuid. It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network. For example, it should not be changed when the "id" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or "type" property changes. The UUID must be in the format "2815492f-7e56-435e-b2e9-246bd7cdc664" (ie, contains only hexadecimal characters and "-"). |
zone |
string |
|
The trust level of a the connection. Free form case-insensitive string (for example "Home", "Work", "Public"). NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately. |
