hledger(1)

NAME

hledger - a command-line accounting tool

SYNOPSIS

hledger [-f FILE] COMMAND [OPTIONS] [ARGS]
hledger [-f FILE] ADDONCMD -- [OPTIONS] [ARGS]
hledger

DESCRIPTION

hledger is a cross-platform program for tracking money, time, or any other commodity, using double-entry accounting and a simple, editable file format. hledger is inspired by and largely compatible with ledger(1).
Tested on unix, mac, windows, hledger aims to be a reliable, practical tool for daily use.

This is hledger's command-line interface (there are also curses and web interfaces). Its basic function is to read a plain text file describing financial transactions (in accounting terms, a general journal) and print useful reports on standard output, or export them as CSV. hledger can also read some other file formats such as CSV files, translating them to journal format. Additionally, hledger lists other hledger-* executables found in the user's $PATH and can invoke them as subcommands.

hledger reads data from one or more files in hledger journal, timeclock, timedot, or CSV format specified with -f, or $LEDGER_FILE, or $HOME/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.journal). If using $LEDGER_FILE, note this must be a real environment variable, not a shell variable. You can specify standard input with -f-.

Transactions are dated movements of money between two (or more) named accounts, and are recorded with journal entries like this:

    2015/10/16 bought food
     expenses:food          $10
     assets:cash

For more about this format, see hledger_journal(5).

Most users use a text editor to edit the journal, usually with an editor mode such as ledger-mode for added convenience. hledger's interactive add command is another way to record new transactions. hledger never changes existing transactions.

To get started, you can either save some entries like the above in ~/.hledger.journal, or run hledger add and follow the prompts. Then try some commands like hledger print or hledger balance. Run hledger with no arguments for a list of commands.

EXAMPLES

Two simple transactions in hledger journal format:

    2015/9/30 gift received
      assets:cash   $20
      income:gifts
    2015/10/16 farmers market
      expenses:food    $10
      assets:cash

Some basic reports:

    $ hledger print
    2015/09/30 gift received
        assets:cash            $20
        income:gifts          $-20
    2015/10/16 farmers market
        expenses:food           $10
        assets:cash            $-10

    $ hledger accounts --tree
    assets
      cash
    expenses
      food
    income
      gifts

    $ hledger balance
                     $10  assets:cash
                     $10  expenses:food
                    $-20  income:gifts
    --------------------
                       0

    $ hledger register cash
    2015/09/30 gift received   assets:cash               $20           $20
    2015/10/16 farmers market  assets:cash              $-10           $10

More commands:

    $ hledger                                 # show available commands
    $ hledger add                             # add more transactions to the journal file
    $ hledger balance                         # all accounts with aggregated balances
    $ hledger balance --help                  # show detailed help for balance command
    $ hledger balance --depth 1               # only top-level accounts
    $ hledger register                        # show account postings, with running total
    $ hledger reg income                      # show postings to/from income accounts
    $ hledger reg 'assets:some bank:checking' # show postings to/from this checking account
    $ hledger print desc:shop                 # show transactions with shop in the description
    $ hledger activity -W                     # show transaction counts per week as a bar chart

OPTIONS

  General options

To see general usage help, including general options which are supported by most hledger commands, run hledger -h.

General help options:

-h --help
    show general usage (or after COMMAND, command usage)

--version
    show version

--debug[=N]
    show debug output (levels 1-9, default: 1)

General input options:

-f FILE --file=FILE
    use a different input file. For stdin, use - (default: $LEDGER_FILE or $HOME/.hledger.journal)

--rules-file=RULESFILE
    Conversion rules file to use when reading CSV (default: FILE.rules)

--alias=OLD=NEW
    rename accounts named OLD to NEW

--anon
    anonymize accounts and payees

--pivot FIELDNAME
    use some other field or tag for the account name

-I --ignore-assertions
    ignore any failing balance assertions

General reporting options:

-b --begin=DATE
    include postings/txns on or after this date

-e --end=DATE
    include postings/txns before this date

-D --daily
    multiperiod/multicolumn report by day

-W --weekly
    multiperiod/multicolumn report by week

-M --monthly
    multiperiod/multicolumn report by month

-Q --quarterly
    multiperiod/multicolumn report by quarter

-Y --yearly
    multiperiod/multicolumn report by year

-p --period=PERIODEXP
    set start date, end date, and/or reporting interval all at once (overrides the flags above)

--date2
    match the secondary date instead (see command help for other effects)

-U --unmarked
    include only unmarked postings/txns (can combine with -P or -C)

-P --pending
    include only pending postings/txns

-C --cleared
    include only cleared postings/txns

-R --real
    include only non-virtual postings

-NUM --depth=NUM
    hide/aggregate accounts or postings more than NUM levels deep

-E --empty
    show items with zero amount, normally hidden

-B --cost
    convert amounts to their cost at transaction time (using the transaction price, if any)

-V --value
    convert amounts to their market value on the report end date (using the most recent applicable market price, if any)

When a reporting option appears more than once in the command line, the last one takes precedence.

Some reporting options can also be written as query arguments.

  Command options

To see options for a particular command, including command-specific options, run: hledger COMMAND -h.

Command-specific options must be written after the command name, eg: hledger print -x.

Additionally, if the command is an addon, you may need to put its options after a double-hyphen, eg: hledger ui -- --watch. Or, you can run the addon executable directly: hledger-ui --watch.

  Command arguments

Most hledger commands accept arguments after the command name, which are often a query, filtering the data in some way.

  Argument expansion

You can save a set of command line options/arguments in a file, one per line, and then reuse them by writing @FILE in a command line. (To prevent this expansion of @-arguments, precede them with a -- argument.)

  Special characters

Option and argument values which contain problematic characters should be escaped with double quotes, backslashes, or (best) single quotes. Problematic characters means spaces, and also characters which are significant to your command shell, such as less-than/greater-than. Eg: hledger register -p 'last year' "accounts receivable (receivable|payable)" amt:\>100.

Characters which are significant both to the shell and in regular expressions sometimes need to be double-escaped. These include parentheses, the pipe symbol and the dollar sign. Eg, to match the dollar symbol, bash users should do: hledger balance cur:'\$' or hledger balance cur:\\$.

When hledger is invoking an addon executable (like hledger-ui), options and arguments get de-escaped once more, so you might need triple-escaping. Eg: hledger ui cur:'\\$' or hledger ui cur:\\\\$ in bash. (The number of backslashes in fish shell is left as an exercise for the reader.)

Inside a file used for argument expansion, one less level of escaping is enough. (And in this case, backslashes seem to work better than quotes. Eg: cur:\$).

If in doubt, keep things simple:

•   run add-on executables directly

•   write options after the command

•   enclose problematic args in single quotes

•   if needed, also add a backslash to escape regexp metacharacters

If you're really stumped, add --debug=2 to troubleshoot.

  Input files

hledger reads transactions from a data file (and the add command writes to it). By default this file is $HOME/.hledger.journal (or on Windows, something like C:/Users/USER/.hledger.journal). You can override this with the $LEDGER_FILE environment variable:

    $ setenv LEDGER_FILE ~/finance/2016.journal
    $ hledger stats

or with the -f/--file option:

    $ hledger -f /some/file stats

The file name - (hyphen) means standard input:

    $ cat some.journal | hledger -f-

Usually the data file is in hledger's journal format, but it can also be one of several other formats, listed below. hledger detects the format automatically based on the file extension, or if that is not recognised, by trying each built-in "reader" in turn:

Reader: | Reads: | Used for file extensions:
journal | hledger's journal format, also some Ledger journals | .journal .j .hledger .ledger
timeclock | timeclock files (precise time logging) | .timeclock
timedot | timedot files (approximate time logging) | .timedot
csv | comma-separated values (data interchange) | .csv

If needed (eg to ensure correct error messages when a file has the "wrong" extension), you can force a specific reader/format by prepending it to the file path with a colon. Examples:

    $ hledger -f csv:/some/csv-file.dat stats
    $ echo 'i 2009/13/1 08:00:00' | hledger print -ftimeclock:-

You can also specify multiple -f options, to read multiple files as one big journal. There are some limitations with this:

•   directives in one file will not affect the other files

•   balance assertions will not see any account balances from previous files

If you need those, either use the include directive, or concatenate the files, eg: cat a.journal b.journal | hledger -f- CMD.

  Smart dates

hledger's user interfaces accept a flexible "smart date" syntax (unlike dates in the journal file). Smart dates allow some english words, can be relative to today's date, and can have less-significant date parts omitted (defaulting to 1).

Examples:

2009/1/1, 2009/01/01, 2009-1-1, 2009.1.1 | simple dates, several separators allowed
2009/1, 2009 | same as above - a missing day or month defaults to 1
1/1, january, jan, this year | relative dates, meaning january 1 of the current year
next year | january 1 of next year
this month | the 1st of the current month
this week | the most recent monday
last week | the monday of the week before this one
lastweek | spaces are optional
today, yesterday, tomorrow |

  Report start & end date

Most hledger reports show the full span of time represented by the journal data, by default. So, the effective report start and end dates will be the earliest and latest transaction or posting dates found in the journal.

Often you will want to see a shorter time span, such as the current month. You can specify a start and/or end date using -b/--begin, -e/--end, -p/--period or a date: query (described below). All of these accept the smart date syntax. One important thing to be aware of when specifying end dates: as in Ledger, end dates are exclusive, so you need to write the date after the last day you want to include.

Examples:

-b 2016/3/17 | begin on St. Patrick's day 2016
-e 12/1 | end at the start of december 1st of the current year (11/30 will be the last date included)
-b thismonth | all transactions on or after the 1st of the current month
-p thismonth | all transactions in the current month
date:2016/3/17- | the above written as queries instead
date:-12/1 |
date:thismonth- |
date:thismonth |

  Report intervals

A report interval can be specified so that commands like register, balance and activity will divide their reports into multiple subperiods. The basic intervals can be selected with one of -D/--daily, -W/--weekly, -M/--monthly, -Q/--quarterly, or -Y/--yearly. More complex intervals may be specified with a period expression. Report intervals can not be specified with a query, currently.

  Period expressions

The -p/--period option accepts period expressions, a shorthand way of expressing a start date, end date, and/or report interval all at once.

Here's a basic period expression specifying the first quarter of 2009. Note, hledger always treats start dates as inclusive and end dates as exclusive:

-p "from 2009/1/1 to 2009/4/1"

Keywords like "from" and "to" are optional, and so are the spaces, as long as you don't run two dates together. "to" can also be written as "-". These are equivalent to the above:

-p "2009/1/1 2009/4/1"
-p2009/1/1to2009/4/1
-p2009/1/1-2009/4/1

Dates are smart dates, so if the current year is 2009, the above can also be written as:

-p "1/1 4/1"
-p "january-apr"
-p "this year to 4/1"

If you specify only one date, the missing start or end date will be the earliest or latest transaction in your journal:

-p "from 2009/1/1" | everything after january 1, 2009
-p "from 2009/1" | the same
-p "from 2009" | the same
-p "to 2009" | everything before january 1, 2009

A single date with no "from" or "to" defines both the start and end date like so:

-p "2009" | the year 2009; equivalent to "2009/1/1 to 2010/1/1"
-p "2009/1" | the month of jan; equivalent to "2009/1/1 to 2009/2/1"
-p "2009/1/1" | just that day; equivalent to "2009/1/1 to 2009/1/2"

The argument of -p can also begin with, or be, a report interval expression. The basic report intervals are daily, weekly, monthly, quarterly, or yearly, which have the same effect as the -D,-W,-M,-Q, or -Y flags. Between report interval and start/end dates (if any), the word in is optional. Examples:

-p "weekly from 2009/1/1 to 2009/4/1"
-p "monthly in 2008"
-p "quarterly"

The following more complex report intervals are also supported: biweekly, bimonthly, every N days|weeks|months|quarters|years, every Nth day [of month], every Nth day of week.

Examples:

-p "bimonthly from 2008"
-p "every 2 weeks"
-p "every 5 days from 1/3"

Show historical balances at end of 15th each month (N is exclusive end date):

hledger balance -H -p "every 16th day"

Group postings from start of wednesday to end of next tuesday (N is start date and exclusive end date):

hledger register checking -p "every 3rd day of week"

  Depth limiting

With the --depth N option (short form: -N), commands like account, balance and register will show only the uppermost accounts in the account tree, down to level N. Use this when you want a summary with less detail. This flag has the same effect as a depth: query argument (so -2, --depth=2 or depth:2 are basically equivalent).

  Pivoting

Normally hledger sums amounts, and organizes them in a hierarchy, based on account name. The --pivot FIELD option causes it to sum and organize hierarchy based on the value of some other field instead. FIELD can be: code, description, payee, note, or the full name (case insensitive) of any tag. As with account names, values containing colon:separated:parts will be displayed hierarchically in reports.

--pivot is a general option affecting all reports; you can think of hledger transforming the journal before any other processing, replacing every posting's account name with the value of the specified field on that posting, inheriting it from the transaction or using a blank value if it's not present.

An example:

    2016/02/16 Member Fee Payment
        assets:bank account                    2 EUR
        income:member fees                    -2 EUR  ; member: John Doe

Normal balance report showing account names:

    $ hledger balance
                   2 EUR  assets:bank account
                  -2 EUR  income:member fees
    --------------------
                       0

Pivoted balance report, using member: tag values instead:

    $ hledger balance --pivot member
                   2 EUR
                  -2 EUR  John Doe
    --------------------
                       0

One way to show only amounts with a member: value (using a query, described below):

    $ hledger balance --pivot member tag:member=.
                  -2 EUR  John Doe
    --------------------
                  -2 EUR

Another way (the acct: query matches against the pivoted "account name"):

    $ hledger balance --pivot member acct:.
                  -2 EUR  John Doe
    --------------------
                  -2 EUR

  Cost

The -B/--cost flag converts amounts to their cost at transaction time, if they have a transaction price specified.

  Market value

The -V/--value flag converts the reported amounts to their market value on the report end date, using the most recent applicable market prices, when known. Specifically, when there is a market price (P directive) for the amount's commodity, dated on or before the report end date (see hledger -> Report start & end date), the amount will be converted to the price's commodity. If multiple applicable prices are defined, the latest-dated one is used (and if dates are equal, the one last parsed).

For example:

    # one euro is worth this many dollars from nov 1
    P 2016/11/01 € $1.10
    # purchase some euros on nov 3
    2016/11/3
        assets:euros        €100
        assets:checking
    # the euro is worth fewer dollars by dec 21
    P 2016/12/21 € $1.03

How many euros do I have ?

    $ hledger -f t.j bal euros
                    €100  assets:euros

What are they worth on nov 3 ? (no report end date specified, defaults to the last date in the journal)

    $ hledger -f t.j bal euros -V
                 $110.00  assets:euros

What are they worth on dec 21 ?

    $ hledger -f t.j bal euros -V -e 2016/12/21
                 $103.00  assets:euros

Currently, hledger's -V only uses market prices recorded with P directives, not transaction prices (unlike Ledger).

Using -B and -V together is allowed.

  Regular expressions

hledger uses regular expressions in a number of places:

•   query terms, on the command line and in the hledger-web search form: REGEX, desc:REGEX, cur:REGEX, tag:...=REGEX

•   CSV rules conditional blocks: if REGEX ...

•   account alias directives and options: alias /REGEX/ = REPLACEMENT, --alias /REGEX/=REPLACEMENT

hledger's regular expressions come from the regex-tdfa library. In general they:

•   are case insensitive

•   are infix matching (do not need to match the entire thing being matched)

•   are POSIX extended regular expressions

•   also support GNU word boundaries (\<, \>, \b, \B)

•   and parenthesised capturing groups and numeric backreferences in replacement strings

•   do not support mode modifiers like (?s)

Some things to note:

•   In the alias directive and --alias option, regular expressions must be enclosed in forward slashes (/REGEX/). Elsewhere in hledger, these are not required.

•   In queries, to match a regular expression metacharacter like $ as a literal character, prepend a backslash. Eg to search for amounts with the dollar sign in hledger-web, write cur:\$.

•   On the command line, some metacharacters like $ have a special meaning to the shell and so must be escaped at least once more. See Special characters.

QUERIES

One of hledger's strengths is being able to quickly report on precise subsets of your data. Most commands accept an optional query expression, written as arguments after the command name, to filter the data by date, account name or other criteria. The syntax is similar to a web search: one or more space-separated search terms, quotes to enclose whitespace, prefixes to match specific fields, a not: prefix to negate the match.

We do not yet support arbitrary boolean combinations of search terms; instead most commands show transactions/postings/accounts which match (or negatively match):

•   any of the description terms AND

•   any of the account terms AND

•   any of the status terms AND

•   all the other terms.

The print command instead shows transactions which:

•   match any of the description terms AND

•   have any postings matching any of the positive account terms AND

•   have no postings matching any of the negative account terms AND

•   match all the other terms.

The following kinds of search terms can be used. Remember these can also be prefixed with not:, eg to exclude a particular subaccount.

REGEX
    match account names by this regular expression. (No prefix is equivalent to acct:).

acct:REGEX
    same as above

amt:N, amt:<N, amt:<=N, amt:>N, amt:>=N
    match postings with a single-commodity amount that is equal to, less than, or greater than N. (Multi-commodity amounts are not tested, and will always match.) The comparison has two modes: if N is preceded by a + or - sign (or is 0), the two signed numbers are compared. Otherwise, the absolute magnitudes are compared, ignoring sign.

code:REGEX
    match by transaction code (eg check number)

cur:REGEX
    match postings or transactions including any amounts whose currency/commodity symbol is fully matched by REGEX. (For a partial match, use .*REGEX.*). Note, to match characters which are regex-significant, like the dollar sign ($), you need to prepend \. And when using the command line you need to add one more level of quoting to hide it from the shell, so eg do: hledger print cur:'\$' or hledger print cur:\\$.

desc:REGEX
    match transaction descriptions.

date:PERIODEXPR
    match dates within the specified period. PERIODEXPR is a period expression (with no report interval). Examples: date:2016, date:thismonth, date:2000/2/1-2/15, date:lastweek-. If the --date2 command line flag is present, this matches secondary dates instead.

date2:PERIODEXPR
    match secondary dates within the specified period.

depth:N
    match (or display, depending on command) accounts at or above this depth

note:REGEX
    match transaction notes (part of description right of |, or whole description when there's no |)

payee:REGEX
    match transaction payee/payer names (part of description left of |, or whole description when there's no |)

real:, real:0
    match real or virtual postings respectively

status:, status:!, status:*
    match unmarked, pending, or cleared transactions respectively

tag:REGEX[=REGEX]
    match by tag name, and optionally also by tag value. Note a tag: query is considered to match a transaction if it matches any of the postings. Also remember that postings inherit the tags of their parent transaction.

The following special search term is used automatically in hledger-web, only:

inacct:ACCTNAME
    tells hledger-web to show the transaction register for this account. Can be filtered further with acct etc.

Some of these can also be expressed as command-line options (eg depth:2 is equivalent to --depth 2). Generally you can mix options and query arguments, and the resulting query will be their intersection (perhaps excluding the -p/--period option).

COMMANDS

hledger provides a number of subcommands; hledger with no arguments shows a list.

If you install additional hledger-* packages, or if you put programs or scripts named hledger-NAME in your PATH, these will also be listed as subcommands.

Run a subcommand by writing its name as first argument (eg hledger incomestatement). You can also write one of the standard short aliases displayed in parentheses in the command list (hledger b), or any any unambiguous prefix of a command name (hledger inc).

Here are all the builtin commands in alphabetical order. See also hledger for a more organised command list, and hledger CMD -h for detailed command help.

  accounts

Show account names. Alias: a.

--tree
    show short account names, as a tree

--flat
    show full account names, as a list (default)

--drop=N
    in flat mode: omit N leading account name parts

This command lists all account names that are in use (ie, all the accounts which have at least one transaction posting to them). With query arguments, only matched account names are shown.

It shows a flat list by default. With --tree, it uses indentation to show the account hierarchy.

In flat mode you can add --drop N to omit the first few account name components.

Examples:

    $ hledger accounts --tree
    assets
      bank
        checking
        saving
      cash
    expenses
      food
      supplies
    income
      gifts
      salary
    liabilities
      debts

    $ hledger accounts --drop 1
    bank:checking
    bank:saving
    cash
    food
    supplies
    gifts
    salary
    debts

    $ hledger accounts
    assets:bank:checking
    assets:bank:saving
    assets:cash
    expenses:food
    expenses:supplies
    income:gifts
    income:salary
    liabilities:debts

  activity

Show an ascii barchart of posting counts per interval.

The activity command displays an ascii histogram showing transaction counts by day, week, month or other reporting interval (by day is the default). With query arguments, it counts only matched transactions.

    $ hledger activity --quarterly
    2008-01-01 **
    2008-04-01 *******
    2008-07-01
    2008-10-01 **

  add

Prompt for transactions and add them to the journal.

--no-new-accounts
    don't allow creating new accounts; helps prevent typos when entering account names

Many hledger users edit their journals directly with a text editor, or generate them from CSV. For more interactive data entry, there is the add command, which prompts interactively on the console for new transactions, and appends them to the journal file (if there are multiple -f FILE options, the first file is used.) Existing transactions are not changed. This is the only hledger command that writes to the journal file.

To use it, just run hledger add and follow the prompts. You can add as many transactions as you like; when you are finished, enter . or press control-d or control-c to exit.

Features:

•   add tries to provide useful defaults, using the most similar recent transaction (by description) as a template.

•   You can also set the initial defaults with command line arguments.

•   Readline-style edit keys can be used during data entry.

•   The tab key will auto-complete whenever possible - accounts, descriptions, dates (yesterday, today, tomorrow). If the input area is empty, it will insert the default value.

•   If the journal defines a default commodity, it will be added to any bare numbers entered.

•   A parenthesised transaction code may be entered following a date.

•   Comments and tags may be entered following a description or amount.

•   If you make a mistake, enter < at any prompt to restart the transaction.

•   Input prompts are displayed in a different colour when the terminal supports it.

Example (see the tutorial for a detailed explanation):

    $ hledger add
    Adding transactions to journal file /src/hledger/examples/sample.journal
    Any command line arguments will be used as defaults.
    Use tab key to complete, readline keys to edit, enter to accept defaults.
    An optional (CODE) may follow transaction dates.
    An optional ; COMMENT may follow descriptions or amounts.
    If you make a mistake, enter < at any prompt to restart the transaction.
    To end a transaction, enter . when prompted.
    To quit, enter . at a date prompt or press control-d or control-c.
    Date [2015/05/22]:
    Description: supermarket
    Account 1: expenses:food
    Amount  1: $10
    Account 2: assets:checking
    Amount  2 [$-10.0]:
    Account 3 (or . or enter to finish this transaction): .
    2015/05/22 supermarket
        expenses:food             $10
        assets:checking        $-10.0
    Save this transaction to the journal ? [y]:
    Saved.
    Starting the next transaction (. or ctrl-D/ctrl-C to quit)
    Date [2015/05/22]: <CTRL-D> $

  balance

Show accounts and their balances. Aliases: b, bal.

--change
    show balance change in each period (default)

--cumulative
    show balance change accumulated across periods (in multicolumn reports)

-H --historical
    show historical ending balance in each period (includes postings before report start date)

--tree
    show accounts as a tree; amounts include subaccounts (default in simple reports)

--flat
    show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports)

-A --average
    show a row average column (in multicolumn mode)

-T --row-total
    show a row total column (in multicolumn mode)

-N --no-total
    don't show the final total row

--drop=N
    omit N leading account name parts (in flat mode)

--no-elide
    don't squash boring parent accounts (in tree mode)

--format=LINEFORMAT
    in single-column balance reports: use this custom line format

-O FMT --output-format=FMT
    select the output format. Supported formats: txt, csv.

-o FILE --output-file=FILE
    write output to FILE. A file extension matching one of the above formats selects that format.

--pretty-tables
    Use unicode to display prettier tables.

--sort-amount
    Sort by amount (total row amount, or by average if that is displayed), instead of account name (in flat mode)

The balance command displays accounts and balances. It is hledger's most featureful and versatile command.

    $ hledger balance
                     $-1  assets
                      $1    bank:saving
                     $-2    cash
                      $2  expenses
                      $1    food
                      $1    supplies
                     $-2  income
                     $-1    gifts
                     $-1    salary
                      $1  liabilities:debts
    --------------------
                       0

More precisely, the balance command shows the change to each account's balance caused by all (matched) postings. In the common case where you do not filter by date and your journal sets the correct opening balances, this is the same as the account's ending balance.

By default, accounts are displayed hierarchically, with subaccounts indented below their parent. "Boring" accounts, which contain a single interesting subaccount and no balance of their own, are elided into the following line for more compact output. (Use --no-elide to prevent this. Eliding of boring accounts is not yet supported in multicolumn reports.)

Each account's balance is the "inclusive" balance - it includes the balances of any subaccounts.

Accounts which have zero balance (and no non-zero subaccounts) are omitted. Use -E/--empty to show them.

A final total is displayed by default; use -N/--no-total to suppress it:

    $ hledger balance -p 2008/6 expenses --no-total
                      $2  expenses
                      $1    food
                      $1    supplies

  Flat mode

To see a flat list of full account names instead of the default hierarchical display, use --flat. In this mode, accounts (unless depth-clipped) show their "exclusive" balance, excluding any subaccount balances. In this mode, you can also use --drop N to omit the first few account name components.

    $ hledger balance -p 2008/6 expenses -N --flat --drop 1
                      $1  food
                      $1  supplies

  Depth limited balance reports

With --depth N, balance shows accounts only to the specified depth. This is very useful to show a complex charts of accounts in less detail. In flat mode, balances from accounts below the depth limit will be shown as part of a parent account at the depth limit.

    $ hledger balance -N --depth 1
                     $-1  assets
                      $2  expenses
                     $-2  income
                      $1  liabilities

  Multicolumn balance reports

With a reporting interval, multiple balance columns will be shown, one for each report period. There are three types of multi-column balance report, showing different information:

1.  By default: each column shows the sum of postings in that period, ie the account's change of balance in that period. This is useful eg for a monthly income statement:

        $ hledger balance --quarterly income expenses -E
        Balance changes in 2008:
                           ||  2008q1  2008q2  2008q3  2008q4
        ===================++=================================
         expenses:food     ||       0      $1       0       0
         expenses:supplies ||       0      $1       0       0
         income:gifts      ||       0     $-1       0       0
         income:salary     ||     $-1       0       0       0
        -------------------++---------------------------------
                           ||     $-1      $1       0       0

2.  With --cumulative: each column shows the ending balance for that period, accumulating the changes across periods, starting from 0 at the report start date:

        $ hledger balance --quarterly income expenses -E --cumulative
        Ending balances (cumulative) in 2008:
                           ||  2008/03/31  2008/06/30  2008/09/30  2008/12/31
        ===================++=================================================
         expenses:food     ||           0          $1          $1          $1
         expenses:supplies ||           0          $1          $1          $1
         income:gifts      ||           0         $-1         $-1         $-1
         income:salary     ||         $-1         $-1         $-1         $-1
        -------------------++-------------------------------------------------
                           ||         $-1           0           0           0

3.  With --historical/-H: each column shows the actual historical ending balance for that period, accumulating the changes across periods, starting from the actual balance at the report start date. This is useful eg for a multi-period balance sheet, and when you are showing only the data after a certain start date:

        $ hledger balance ^assets ^liabilities --quarterly --historical --begin 2008/4/1
        Ending balances (historical) in 2008/04/01-2008/12/31:
                              ||  2008/06/30  2008/09/30  2008/12/31
        ======================++=====================================
         assets:bank:checking ||          $1          $1           0
         assets:bank:saving   ||          $1          $1          $1
         assets:cash          ||         $-2         $-2         $-2
         liabilities:debts    ||           0           0          $1
        ----------------------++-------------------------------------
                              ||           0           0           0

Multi-column balance reports display accounts in flat mode by default; to see the hierarchy, use --tree.

With a reporting interval (like --quarterly above), the report start/end dates will be adjusted if necessary so that they encompass the displayed report periods. This is so that the first and last periods will be "full" and comparable to the others.

The -E/--empty flag does two things in multicolumn balance reports: first, the report will show all columns within the specified report period (without -E, leading and trailing columns with all zeroes are not shown). Second, all accounts which existed at the report start date will be considered, not just the ones with activity during the report period (use -E to include low-activity accounts which would otherwise would be omitted).

The -T/--row-total flag adds an additional column showing the total for each row.

The -A/--average flag adds a column showing the average value in each row.

Here's an example of all three:

    $ hledger balance -Q income expenses --tree -ETA
    Balance changes in 2008:
                ||  2008q1  2008q2  2008q3  2008q4    Total  Average
    ============++===================================================
     expenses   ||       0      $2       0       0       $2       $1
       food     ||       0      $1       0       0       $1        0
       supplies ||       0      $1       0       0       $1        0
     income     ||     $-1     $-1       0       0      $-2      $-1
       gifts    ||       0     $-1       0       0      $-1        0
       salary   ||     $-1       0       0       0      $-1        0
    ------------++---------------------------------------------------
                ||     $-1      $1       0       0        0        0
    # Average is rounded to the dollar here since all journal amounts are

  Custom balance output

In simple (non-multi-column) balance reports, you can customise the output with --format FMT:

    $ hledger balance --format "%20(account) %12(total)"
                  assets          $-1
             bank:saving           $1
                    cash          $-2
                expenses           $2
                    food           $1
                supplies           $1
                  income          $-2
                   gifts          $-1
                  salary          $-1
       liabilities:debts           $1
    ---------------------------------
                                    0

The FMT format string (plus a newline) specifies the formatting applied to each account/balance pair. It may contain any suitable text, with data fields interpolated like so:

%[MIN][.MAX](FIELDNAME)

•   MIN pads with spaces to at least this width (optional)

•   MAX truncates at this width (optional)

•   FIELDNAME must be enclosed in parentheses, and can be one of:

    •   depth_spacer - a number of spaces equal to the account's depth, or if MIN is specified, MIN * depth spaces.

    •   account - the account's name

    •   total - the account's balance/posted total, right justified

Also, FMT can begin with an optional prefix to control how multi-commodity amounts are rendered:

•   %_ - render on multiple lines, bottom-aligned (the default)

•   %^ - render on multiple lines, top-aligned

•   %, - render on one line, comma-separated

There are some quirks. Eg in one-line mode, %(depth_spacer) has no effect, instead %(account) has indentation built in.
 Experimentation may be needed to get pleasing results.

Some example formats:

•   %(total) - the account's total

•   %-20.20(account) - the account's name, left justified, padded to 20 characters and clipped at 20 characters

•   %,%-50(account) %25(total) - account name padded to 50 characters, total padded to 20 characters, with multiple commodities rendered on one line

•   %20(total) %2(depth_spacer)%-(account) - the default format for the single-column balance report

  Colour support

The balance command shows negative amounts in red, if:

•   the TERM environment variable is not set to dumb

•   the output is not being redirected or piped anywhere

  Output destination

The balance, print, register and stats commands can write their output to a destination other than the console. This is controlled by the -o/--output-file option.

    $ hledger balance -o -     # write to stdout (the default)
    $ hledger balance -o FILE  # write to FILE

  CSV output

The balance, print and register commands can write their output as CSV. This is useful for exporting data to other applications, eg to make charts in a spreadsheet. This is controlled by the -O/--output-format option, or by specifying a .csv file extension with -o/--output-file.

    $ hledger balance -O csv       # write CSV to stdout
    $ hledger balance -o FILE.csv  # write CSV to FILE.csv

  balancesheet

Show a balance sheet. Alias: bs.

--change
    show balance change in each period, instead of historical ending balances

--cumulative
    show balance change accumulated across periods (in multicolumn reports), instead of historical ending balances

-H --historical
    show historical ending balance in each period (includes postings before report start date) (default)

--tree
    show accounts as a tree; amounts include subaccounts (default in simple reports)

--flat
    show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports)

-A --average
    show a row average column (in multicolumn mode)

-T --row-total
    show a row total column (in multicolumn mode)

-N --no-total
    don't show the final total row

--drop=N
    omit N leading account name parts (in flat mode)

--no-elide
    don't squash boring parent accounts (in tree mode)

--format=LINEFORMAT
    in single-column balance reports: use this custom line format

--sort-amount
    sort by amount instead of account name

This command displays a simple balance sheet. It currently assumes that you have top-level accounts named asset and liability (plural forms also allowed.)

    $ hledger balancesheet
    Balance Sheet
    Assets:
                     $-1  assets
                      $1    bank:saving
                     $-2    cash
    --------------------
                     $-1
    Liabilities:
                      $1  liabilities:debts
    --------------------
                      $1
    Total:
    --------------------
                       0

With a reporting interval, multiple columns will be shown, one for each report period. As with multicolumn balance reports, you can alter the report mode with --change/--cumulative/--historical. Normally balancesheet shows historical ending balances, which is what you need for a balance sheet; note this means it ignores report begin dates.

  balancesheetequity

Show a balance sheet including equity. Alias: bse.

Other than showing the equity accounts, this command is exactly the same as the command balancesheet. Please refer to it for the available options.

This command displays a balancesheet. It currently assumes that you have top-level accounts named asset, liability and equity (plural forms also allowed.)

    $ hledger balancesheetequity
    Balance Sheet With Equity
    Assets:
                     $-2  assets
                      $1    bank:saving
                     $-3    cash
    --------------------
                     $-2
    Liabilities:
                      $1  liabilities:debts
    --------------------
                      $1
    Equity:
              $1  equity:owner
    --------------------
              $1
    Total:
    --------------------
                       0

  cashflow

Show a cashflow statement. Alias: cf.

--change
    show balance change in each period (default)

--cumulative
    show balance change accumulated across periods (in multicolumn reports), instead of changes during periods

-H --historical
    show historical ending balance in each period (includes postings before report start date), instead of changes during each period

--tree
    show accounts as a tree; amounts include subaccounts (default in simple reports)

--flat
    show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports)

-A --average
    show a row average column (in multicolumn mode)

-T --row-total
    show a row total column (in multicolumn mode)

-N --no-total
    don't show the final total row (in simple reports)

--drop=N
    omit N leading account name parts (in flat mode)

--no-elide
    don't squash boring parent accounts (in tree mode)

--format=LINEFORMAT
    in single-column balance reports: use this custom line format

--sort-amount
    sort by amount instead of account name

This command displays a simple cashflow statement It shows the change in all "cash" (ie, liquid assets) accounts for the period. It currently assumes that cash accounts are under a top-level account named asset and do not contain receivable, :A/R or :fixed.

    $ hledger cashflow
    Cashflow Statement
    Cash flows:
                     $-1  assets
                      $1    bank:saving
                     $-2    cash
    --------------------
                     $-1
    Total:
    --------------------
                     $-1

With a reporting interval, multiple columns will be shown, one for each report period. Normally cashflow shows changes in assets per period, though as with multicolumn balance reports you can alter the report mode with --change/--cumulative/--historical.

  check-dates

Check that transactions are sorted by increasing date. With a query, only matched transactions' dates are checked.

  check-dupes

Report account names having the same leaf but different prefixes. An example: http://stefanorodighiero.net/software/hledger-dupes.html

  equity

Print closing/opening transactions that bring some or all account balances to zero and back. Can be useful for bringing account balances across file boundaries.

  help

Show any of the hledger manuals.

The help command displays any of the main hledger manuals, in one of several ways. Run it with no argument to list the manuals, or provide a full or partial manual name to select one.

hledger manuals are available in several formats. hledger help will use the first of these display methods that it finds: info, man, $PAGER, less, stdout (or when non-interactive, just stdout). You can force a particular viewer with the --info, --man, --pager, --cat flags.

    $ hledger help
    Please choose a manual by typing "hledger help MANUAL" (a substring is ok).
    Manuals: hledger hledger-ui hledger-web hledger-api journal csv timeclock timedot

    $ hledger help h --man
    hledger(1)                    hledger User Manuals                    hledger(1)
    NAME
           hledger - a command-line accounting tool
    SYNOPSIS
           hledger [-f FILE] COMMAND [OPTIONS] [ARGS]
           hledger [-f FILE] ADDONCMD -- [OPTIONS] [ARGS]
           hledger
    DESCRIPTION
           hledger  is  a  cross-platform  program  for tracking money, time, or any
    ...

  import

Read new transactions added to each FILE since last run, and add them to the main journal file.

--dry-run
    just show the transactions to be imported

Input files are provided as arguments, or glob patterns. So eg to add new transactions from all CSV files to the main journal: hledger import *.csv

New transactions are detected like print --new (using .latest.FILE state files).

  incomestatement

Show an income statement. Alias: is.

--change
    show balance change in each period (default)

--cumulative
    show balance change accumulated across periods (in multicolumn reports), instead of changes during periods

-H --historical
    show historical ending balance in each period (includes postings before report start date), instead of changes during each period

--tree
    show accounts as a tree; amounts include subaccounts (default in simple reports)

--flat
    show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports)

-A --average
    show a row average column (in multicolumn mode)

-T --row-total
    show a row total column (in multicolumn mode)

-N --no-total
    don't show the final total row

--drop=N
    omit N leading account name parts (in flat mode)

--no-elide
    don't squash boring parent accounts (in tree mode)

--format=LINEFORMAT
    in single-column balance reports: use this custom line format

--sort-amount
    sort by amount instead of account name

This command displays a simple income statement. It currently assumes that you have top-level accounts named income (or revenue) and expense (plural forms also allowed.)

    $ hledger incomestatement
    Income Statement
    Revenues:
                     $-2  income
                     $-1    gifts
                     $-1    salary
    --------------------
                     $-2
    Expenses:
                      $2  expenses
                      $1    food
                      $1    supplies
    --------------------
                      $2
    Total:
    --------------------
                       0

With a reporting interval, multiple columns will be shown, one for each report period. Normally incomestatement shows revenues/expenses per period, though as with multicolumn balance reports you can alter the report mode with --change/--cumulative/--historical.

  prices

Print all market prices from the journal.

  print

Show transactions from the journal. Aliases: p, txns.

-m STR --match=STR
    show the transaction whose description is most similar to STR, and is most recent

--new
    show only newer-dated transactions added in each file since last run

-x     --explicit
    show all amounts explicitly

-O FMT --output-format=FMT
    select the output format. Supported formats: txt, csv.

-o FILE --output-file=FILE
    write output to FILE. A file extension matching one of the above formats selects that format.

    $ hledger print
    2008/01/01 income
        assets:bank:checking            $1
        income:salary                  $-1
    2008/06/01 gift
        assets:bank:checking            $1
        income:gifts                   $-1
    2008/06/02 save
        assets:bank:saving              $1
        assets:bank:checking           $-1
    2008/06/03 * eat & shop
        expenses:food                $1
        expenses:supplies            $1
        assets:cash                 $-2
    2008/12/31 * pay off
        liabilities:debts               $1
        assets:bank:checking           $-1

The print command displays full journal entries (transactions) from the journal file in date order, tidily formatted. print's output is always a valid hledger journal. It preserves all transaction information, but it does not preserve directives or inter-transaction comments

Normally, the journal entry's explicit or implicit amount style is preserved. Ie when an amount is omitted in the journal, it will be omitted in the output. You can use the -x/--explicit flag to make all amounts explicit, which can be useful for troubleshooting or for making your journal more readable and robust against data entry errors. Note, -x will cause postings with a multi-commodity amount (these can arise when a multi-commodity transaction has an implicit amount) will be split into multiple single-commodity postings, for valid journal output.

With -B/--cost, amounts with transaction prices are converted to cost using that price.

With -m/--match and a STR argument, print will show at most one transaction: the one one whose description is most similar to STR, and is most recent. STR should contain at least two characters. If there is no similar-enough match, no transaction will be shown.

With --new, for each FILE being read, hledger reads (and writes) a special state file (.latest.FILE in the same directory), containing the latest transaction date(s) that were seen last time FILE was read. When this file is found, only transactions with newer dates (and new transactions on the latest date) are printed. This is useful for ignoring already-seen entries in import data, such as downloaded CSV files. Eg:

    $ hledger -f bank1.csv print --new
    # shows transactions added since last print --new on this file

This assumes that transactions added to FILE always have same or increasing dates, and that transactions on the same day do not get reordered. See also the import command.

The print command also supports output destination and CSV output. Here's an example of print's CSV output:

    $ hledger print -Ocsv
    "txnidx","date","date2","status","code","description","comment","account","amount","commodity","credit","debit","posting-status","posting-comment"
    "1","2008/01/01","","","","income","","assets:bank:checking","1","$","","1","",""
    "1","2008/01/01","","","","income","","income:salary","-1","$","1","","",""
    "2","2008/06/01","","","","gift","","assets:bank:checking","1","$","","1","",""
    "2","2008/06/01","","","","gift","","income:gifts","-1","$","1","","",""
    "3","2008/06/02","","","","save","","assets:bank:saving","1","$","","1","",""
    "3","2008/06/02","","","","save","","assets:bank:checking","-1","$","1","","",""
    "4","2008/06/03","","*","","eat & shop","","expenses:food","1","$","","1","",""
    "4","2008/06/03","","*","","eat & shop","","expenses:supplies","1","$","","1","",""
    "4","2008/06/03","","*","","eat & shop","","assets:cash","-2","$","2","","",""
    "5","2008/12/31","","*","","pay off","","liabilities:debts","1","$","","1","",""
    "5","2008/12/31","","*","","pay off","","assets:bank:checking","-1","$","1","","",""

•   There is one CSV record per posting, with the parent transaction's fields repeated.

•   The "txnidx" (transaction index) field shows which postings belong to the same transaction. (This number might change if transactions are reordered within the file, files are parsed/included in a different order, etc.)

•   The amount is separated into "commodity" (the symbol) and "amount" (numeric quantity) fields.

•   The numeric amount is repeated in either the "credit" or "debit" column, for convenience. (Those names are not accurate in the accounting sense; it just puts negative amounts under credit and zero or greater amounts under debit.)

  print-unique

Print transactions which do not reuse an already-seen description.

  register

Show postings and their running total. Aliases: r, reg.

--cumulative
    show running total from report start date (default)

-H --historical
    show historical running total/balance (includes postings before report start date)

-A --average
    show running average of posting amounts instead of total (implies --empty)

-r --related
    show postings' siblings instead

-w N --width=N
    set output width (default: terminal width or COLUMNS. -wN,M sets description width as well)

-O FMT --output-format=FMT
    select the output format. Supported formats: txt, csv.

-o FILE --output-file=FILE
    write output to FILE. A file extension matching one of the above formats selects that format.

The register command displays postings, one per line, and their running total. This is typically used with a query selecting a particular account, to see that account's activity:

    $ hledger register checking
    2008/01/01 income               assets:bank:checking            $1            $1
    2008/06/01 gift                 assets:bank:checking            $1            $2
    2008/06/02 save                 assets:bank:checking           $-1            $1
    2008/12/31 pay off              assets:bank:checking           $-1             0

The --historical/-H flag adds the balance from any undisplayed prior postings to the running total. This is useful when you want to see only recent activity, with a historically accurate running balance:

    $ hledger register checking -b 2008/6 --historical
    2008/06/01 gift                 assets:bank:checking            $1            $2
    2008/06/02 save                 assets:bank:checking           $-1            $1
    2008/12/31 pay off              assets:bank:checking           $-1             0

The --depth option limits the amount of sub-account detail displayed.

The --average/-A flag shows the running average posting amount instead of the running total (so, the final number displayed is the average for the whole report period). This flag implies --empty (see below). It is affected by --historical. It works best when showing just one account and one commodity.

The --related/-r flag shows the other postings in the transactions of the postings which would normally be shown.

With a reporting interval, register shows summary postings, one per interval, aggregating the postings to each account:

    $ hledger register --monthly income
    2008/01                 income:salary                          $-1           $-1
    2008/06                 income:gifts                           $-1           $-2

Periods with no activity, and summary postings with a zero amount, are not shown by default; use the --empty/-E flag to see them:

    $ hledger register --monthly income -E
    2008/01                 income:salary                          $-1           $-1
    2008/02                                                          0           $-1
    2008/03                                                          0           $-1
    2008/04                                                          0           $-1
    2008/05                                                          0           $-1
    2008/06                 income:gifts                           $-1           $-2
    2008/07                                                          0           $-2
    2008/08                                                          0           $-2
    2008/09                                                          0           $-2
    2008/10                                                          0           $-2
    2008/11                                                          0           $-2
    2008/12                                                          0           $-2

Often, you'll want to see just one line per interval. The --depth option helps with this, causing subaccounts to be aggregated:

    $ hledger register --monthly assets --depth 1h
    2008/01                 assets                                  $1            $1
    2008/06                 assets                                 $-1             0
    2008/12                 assets                                 $-1           $-1

Note when using report intervals, if you specify start/end dates these will be adjusted outward if necessary to contain a whole number of intervals. This ensures that the first and last intervals are full length and comparable to the others in the report.

  Custom register output

register uses the full terminal width by default, except on windows. You can override this by setting the COLUMNS environment variable (not a bash shell variable) or by using the --width/-w option.

The description and account columns normally share the space equally (about half of (width - 40) each). You can adjust this by adding a description width as part of --width's argument, comma-separated: --width W,D . Here's a diagram:

    <--------------------------------- width (W) ---------------------------------->
    date (10)  description (D)       account (W-41-D)     amount (12)   balance (12)
    DDDDDDDDDD dddddddddddddddddddd  aaaaaaaaaaaaaaaaaaa  AAAAAAAAAAAA  AAAAAAAAAAAA

and some examples:

    $ hledger reg                     # use terminal width (or 80 on windows)
    $ hledger reg -w 100              # use width 100
    $ COLUMNS=100 hledger reg         # set with one-time environment variable
    $ export COLUMNS=100; hledger reg # set till session end (or window resize)
    $ hledger reg -w 100,40           # set overall width 100, description width 40
    $ hledger reg -w $COLUMNS,40      # use terminal width, and set description width

The register command also supports the -o/--output-file and -O/--output-format options for controlling output destination and CSV output.

  register-match

Print the one posting whose transaction description is closest to DESC, in the style of the register command. Helps ledger-autosync detect already-seen transactions when importing.

  rewrite

Print all transactions, adding custom postings to the matched ones.

  stats

Show some journal statistics.

-o FILE --output-file=FILE
    write output to FILE. A file extension matching one of the above formats selects that format.

    $ hledger stats
    Main journal file        : /src/hledger/examples/sample.journal
    Included journal files   :
    Transactions span        : 2008-01-01 to 2009-01-01 (366 days)
    Last transaction         : 2008-12-31 (2333 days ago)
    Transactions             : 5 (0.0 per day)
    Transactions last 30 days: 0 (0.0 per day)
    Transactions last 7 days : 0 (0.0 per day)
    Payees/descriptions      : 5
    Accounts                 : 8 (depth 3)
    Commodities              : 1 ($)

The stats command displays summary information for the whole journal, or a matched part of it. With a reporting interval, it shows a report for each report period.

The stats command also supports -o/--output-file for controlling output destination.

  tags

List all the tag names in use.

  test

Run built-in unit tests.

    $ hledger test
    Cases: 74  Tried: 74  Errors: 0  Failures: 0

This command runs hledger's built-in unit tests and displays a quick report. With a regular expression argument, it selects only tests with matching names. It's mainly used in development, but it's also nice to be able to check your hledger executable for smoke at any time.

ADD-ON COMMANDS

hledger also searches for external add-on commands, and will include these in the commands list. These are programs or scripts in your PATH whose name starts with hledger- and ends with a recognised file extension (currently: no extension, bat,com,exe, hs,lhs,pl,py,rb,rkt,sh).

Add-ons can be invoked like any hledger command, but there are a few things to be aware of. Eg if the hledger-web add-on is installed,

•   hledger -h web shows hledger's help, while hledger web -h shows hledger-web's help.

•   Flags specific to the add-on must have a preceding -- to hide them from hledger. So hledger web --serve --port 9000 will be rejected; you must use hledger web -- --serve --port 9000.

•   You can always run add-ons directly if preferred: hledger-web --serve --port 9000.

Add-ons are a relatively easy way to add local features or experiment with new ideas. They can be written in any language, but haskell scripts have a big advantage: they can use the same hledger (and haskell) library functions that built-in commands do, for command-line options, journal parsing, reporting, etc.

Here are some hledger add-ons available:

  Official add-ons

These are maintained and released along with hledger.

  api

hledger-api serves hledger data as a JSON web API.

  ui

hledger-ui provides an efficient curses-style interface.

  web

hledger-web provides a simple web interface.

  Third party add-ons

These are maintained separately, and usually updated shortly after a hledger release.

  diff

hledger-diff shows differences in an account's transactions between one journal file and another.

  iadd

hledger-iadd is a curses-style, more interactive replacement for the add command.

  interest

hledger-interest generates interest transactions for an account according to various schemes.

  irr

hledger-irr calculates the internal rate of return of an investment account.

  Experimental add-ons

These are available in source form in the hledger repo's bin/ directory; installing them is pretty easy. They may be less mature and documented than built-in commands. Reading and tweaking these is a good way to start making your own!

  autosync

hledger-autosync is a symbolic link for easily running ledger-autosync, if installed. ledger-autosync does deduplicating conversion of OFX data and some CSV formats, and can also download the data if your bank offers OFX Direct Connect.

  budget

hledger-budget.hs adds more budget-tracking features to hledger.

  chart

hledger-chart.hs is an old pie chart generator, in need of some love.

  check

hledger-check.hs checks more powerful account balance assertions.

ENVIRONMENT

COLUMNS The screen width used by the register command. Default: the full terminal width.

LEDGER_FILE The journal file path when not specified with -f. Default: ~/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.journal).

FILES

Reads data from one or more files in hledger journal, timeclock, timedot, or CSV format specified with -f, or $LEDGER_FILE, or $HOME/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.journal).

BUGS

The need to precede addon command options with -- when invoked from hledger is awkward.

When input data contains non-ascii characters, a suitable system locale must be configured (or there will be an unhelpful error). Eg on POSIX, set LANG to something other than C.

In a Microsoft Windows CMD window, non-ascii characters and colours are not supported.

In a Cygwin/MSYS/Mintty window, the tab key is not supported in hledger add.

Not all of Ledger's journal file syntax is supported. See file format differences.

On large data files, hledger is slower and uses more memory than Ledger.

TROUBLESHOOTING

Here are some issues you might encounter when you run hledger (and remember you can also seek help from the IRC channel, mail list or bug tracker):

Successfully installed, but "No command 'hledger' found"
stack and cabal install binaries into a special directory, which should be added to your PATH environment variable. Eg on unix-like systems, that is ~/.local/bin and ~/.cabal/bin respectively.

I set a custom LEDGER_FILE, but hledger is still using the default file
LEDGER_FILE should be a real environment variable, not just a shell variable. The command env | grep LEDGER_FILE should show it. You may need to use export. Here's an explanation.

"Illegal byte sequence" or "Invalid or incomplete multibyte or wide character" errors
In order to handle non-ascii letters and symbols (like £), hledger needs an appropriate locale. This is usually configured system-wide; you can also configure it temporarily. The locale may need to be one that supports UTF-8, if you built hledger with GHC < 7.2 (or possibly always, I'm not sure yet).

Here's an example of setting the locale temporarily, on ubuntu gnu/linux:

    $ file my.journal
    my.journal: UTF-8 Unicode text                 # <- the file is UTF8-encoded
    $ locale -a
    C
    en_US.utf8                             # <- a UTF8-aware locale is available
    POSIX
    $ LANG=en_US.utf8 hledger -f my.journal print   # <- use it for this command

Here's one way to set it permanently, there are probably better ways:

    $ echo "export LANG=en_US.UTF-8" >>~/.bash_profile
    $ bash --login

If we preferred to use eg fr_FR.utf8, we might have to install that first:

    $ apt-get install language-pack-fr
    $ locale -a
    C
    en_US.utf8
    fr_BE.utf8
    fr_CA.utf8
    fr_CH.utf8
    fr_FR.utf8
    fr_LU.utf8
    POSIX
    $ LANG=fr_FR.utf8 hledger -f my.journal print

Note some platforms allow variant locale spellings, but not all (ubuntu accepts fr_FR.UTF8, mac osx requires exactly fr_FR.UTF-8).

REPORTING BUGS
Report bugs at http://bugs.hledger.org (or on the #hledger IRC channel or hledger mail list)

AUTHORS
Simon Michael <simon@joyful.com> and contributors

COPYRIGHT
Copyright (C) 2007-2016 Simon Michael.
Released under GNU GPL v3 or later.

SEE ALSO
hledger(1), hledger-ui(1), hledger-web(1), hledger-api(1), hledger_csv(5), hledger_journal(5), hledger_timeclock(5), hledger_timedot(5), ledger(1) http://hledger.org