#Copyright ReportLab Europe Ltd. 2000-2017
#see license.txt for license details
#history http://www.reportlab.co.uk/cgi-bin/viewcvs.cgi/public/reportlab/trunk/reportlab/platypus/frames.py

__version__='3.3.0'

__doc__="""A frame is a container for content on a page.
"""

import logging
logger = logging.getLogger('reportlab.platypus')

_geomAttr=('x1', 'y1', 'width', 'height', 'leftPadding', 'bottomPadding', 'rightPadding', 'topPadding')
from reportlab import rl_config, isPy3
_FUZZ=rl_config._FUZZ

class ShowBoundaryValue:
    def __init__(self,color=(0,0,0),width=0.1):
        self.color = color
        self.width = width

    if isPy3:
        def __bool__(self):
            return self.color is not None and self.width>=0
    else:
        def __nonzero__(self):
            return self.color is not None and self.width>=0


class Frame:
    '''
    A Frame is a piece of space in a document that is filled by the
    "flowables" in the story.  For example in a book like document most
    pages have the text paragraphs in one or two frames.  For generality
    a page might have several frames (for example for 3 column text or
    for text that wraps around a graphic).

    After creation a Frame is not usually manipulated directly by the
    applications program -- it is used internally by the platypus modules.

    Here is a diagramatid abstraction for the definitional part of a Frame::

                width                    x2,y2
        +---------------------------------+
        | l  top padding                r | h
        | e +-------------------------+ i | e
        | f |                         | g | i
        | t |                         | h | g
        |   |                         | t | h
        | p |                         |   | t
        | a |                         | p |
        | d |                         | a |
        |   |                         | d |
        |   +-------------------------+   |
        |    bottom padding               |
        +---------------------------------+
        (x1,y1) <-- lower left corner

    NOTE!! Frames are stateful objects.  No single frame should be used in
    two documents at the same time (especially in the presence of multithreading.
    '''
    def __init__(self, x1, y1, width,height, leftPadding=6, bottomPadding=6,
            rightPadding=6, topPadding=6, id=None, showBoundary=0,
            overlapAttachedSpace=None,_debug=None):
        self.id = id
        self._debug = _debug

        #these say where it goes on the page
        self.__dict__['_x1'] = x1
        self.__dict__['_y1'] = y1
        self.__dict__['_width'] = width
        self.__dict__['_height'] = height

        #these create some padding.
        self.__dict__['_leftPadding'] = leftPadding
        self.__dict__['_bottomPadding'] = bottomPadding
        self.__dict__['_rightPadding'] = rightPadding
        self.__dict__['_topPadding'] = topPadding

        # if we want a boundary to be shown
        self.showBoundary = showBoundary

        if overlapAttachedSpace is None: overlapAttachedSpace = rl_config.overlapAttachedSpace
        self._oASpace = overlapAttachedSpace
        self._geom()
        self._reset()

    def __getattr__(self,a):
        if a in _geomAttr: return self.__dict__['_'+a]
        raise AttributeError(a)

    def __setattr__(self,a,v):
        if a in _geomAttr:
            self.__dict__['_'+a] = v
            self._geom()
        else:
            self.__dict__[a] = v

    def _saveGeom(self, **kwds):
        if not self.__dict__.setdefault('_savedGeom',{}):
            for ga in _geomAttr:
                ga = '_'+ga
                self.__dict__['_savedGeom'][ga] = self.__dict__[ga]
        for k,v in kwds.items():
            setattr(self,k,v)

    def _restoreGeom(self):
        if self.__dict__.get('_savedGeom',None):
            for ga in _geomAttr:
                ga = '_'+ga
                self.__dict__[ga] = self.__dict__[ga]['_savedGeom']
                del self.__dict__['_savedGeom']
            self._geom()

    def _geom(self):
        self._x2 = self._x1 + self._width
        self._y2 = self._y1 + self._height
        #efficiency
        self._y1p = self._y1 + self._bottomPadding
        #work out the available space
        self._aW = self._x2 - self._x1 - self._leftPadding - self._rightPadding
        self._aH = self._y2 - self._y1p - self._topPadding

    def _reset(self):
        self._restoreGeom()
        #drawing starts at top left
        self._x = self._x1 + self._leftPadding
        self._y = self._y2 - self._topPadding
        self._atTop = 1
        self._prevASpace = 0

        # these two should NOT be set on a frame.
        # they are used when Indenter flowables want
        # to adjust edges e.g. to do nested lists
        self._leftExtraIndent = 0.0
        self._rightExtraIndent = 0.0

    def _getAvailableWidth(self):
        return self._aW - self._leftExtraIndent - self._rightExtraIndent

    def _add(self, flowable, canv, trySplit=0):
        """ Draws the flowable at the current position.
        Returns 1 if successful, 0 if it would not fit.
        Raises a LayoutError if the object is too wide,
        or if it is too high for a totally empty frame,
        to avoid infinite loops"""
        flowable._frame = self
        flowable.canv = canv #so they can use stringWidth etc
        try:
            if getattr(flowable,'frameAction',None):
                flowable.frameAction(self)
                return 1

            y = self._y
            p = self._y1p
            s = 0
            aW = self._getAvailableWidth()
            zeroSize = getattr(flowable,'_ZEROSIZE',False)
            if not self._atTop:
                s =flowable.getSpaceBefore()
                if self._oASpace:
                    if getattr(flowable,'_SPACETRANSFER',False) or zeroSize:
                        s = self._prevASpace
                    s = max(s-self._prevASpace,0)
            h = y - p - s
            if h>0 or zeroSize:
                w, h = flowable.wrap(aW, h)
            else:
                return 0

            h += s
            y -= h

            if y < p-_FUZZ:
                if not rl_config.allowTableBoundsErrors and ((h>self._aH or w>aW) and not trySplit):
                    from reportlab.platypus.doctemplate import LayoutError
                    raise LayoutError("Flowable %s (%sx%s points) too large for frame (%sx%s points)." % (
                        flowable.__class__, w,h, aW,self._aH))
                return 0
            else:
                #now we can draw it, and update the current point.
                s = flowable.getSpaceAfter()
                fbg = getattr(self,'_frameBGs',None)
                if fbg:
                    fbgl, fbgr, fbgc = fbg[-1]
                    fbw = self._width-fbgl-fbgr
                    fbh = y + h + s
                    fby = max(p,y-s)
                    fbh = max(0,fbh-fby)
                    if abs(fbw)>_FUZZ and abs(fbh)>_FUZZ:
                        canv.saveState()
                        canv.setFillColor(fbgc)
                        canv.rect(self._x1+fbgl,fby,fbw,fbh,stroke=0,fill=1)
                        canv.restoreState()

                flowable.drawOn(canv, self._x + self._leftExtraIndent, y, _sW=aW-w)
                flowable.canv=canv
                if self._debug: logger.debug('drew %s' % flowable.identity())
                y -= s
                if self._oASpace:
                    if getattr(flowable,'_SPACETRANSFER',False):
                        s = self._prevASpace
                    self._prevASpace = s
                if y!=self._y: self._atTop = 0
                self._y = y
                return 1
        finally:
            #sometimes canv/_frame aren't still on the flowable
            for a in ('canv', '_frame'):
                if hasattr(flowable,a):
                    delattr(flowable,a)

    add = _add

    def split(self,flowable,canv):
        '''Ask the flowable to split using up the available space.'''
        y = self._y
        p = self._y1p
        s = 0
        if not self._atTop:
            s = flowable.getSpaceBefore()
            if self._oASpace:
                s = max(s-self._prevASpace,0)
        flowable._frame = self                  #some flowables might need these
        flowable.canv = canv        
        try:
            r = flowable.split(self._aW, y-p-s)
        finally:
            #sometimes canv/_frame aren't still on the flowable
            for a in ('canv', '_frame'):
                if hasattr(flowable,a):
                    delattr(flowable,a)
        return r


    def drawBoundary(self,canv):
        "draw the frame boundary as a rectangle (primarily for debugging)."
        from reportlab.lib.colors import Color, toColor
        sb = self.showBoundary
        ss = isinstance(sb,(str,tuple,list)) or isinstance(sb,Color)
        w = -1
        if ss:
            c = toColor(sb,self)
            ss = c is not self
        elif isinstance(sb,ShowBoundaryValue) and sb:
            c = toColor(sb.color,self)
            w = sb.width
            ss = c is not self
        if ss:
            canv.saveState()
            canv.setStrokeColor(c)
            if w>=0:
                canv.setLineWidth(w)
        canv.rect(
                self._x1,
                self._y1,
                self._x2 - self._x1,
                self._y2 - self._y1
                )
        if ss: canv.restoreState()

    def addFromList(self, drawlist, canv):
        """Consumes objects from the front of the list until the
        frame is full.  If it cannot fit one object, raises
        an exception."""

        if self._debug: logger.debug("enter Frame.addFromlist() for frame %s" % self.id)
        if self.showBoundary:
            self.drawBoundary(canv)

        while len(drawlist) > 0:
            head = drawlist[0]
            if self.add(head,canv,trySplit=0):
                del drawlist[0]
            else:
                #leave it in the list for later
                break

    def add_generated_content(self,*C):
        self.__dict__.setdefault('_generated_content',[]).extend(C)

    def _aSpaceString(self):
        return '(%s x %s%s)' % (self._getAvailableWidth(),self._aH,self._atTop and '*' or '')
