2.5.2
=====

### Significant changes relative to 2.5.1:

1. Previously, the VirtualGL faker opened a connection to the 3D X server
whenever an application called XOpenDisplay().  The faker now waits until the
3D X server is actually needed before opening the connection.  This prevents
non-OpenGL X11 applications from opening unnecessary connections to the 3D X
server, which could exhaust the X server's limit of 256 connections if many
users are sharing the system.

2. Fixed a regression caused by 2.4.1[6] whereby applications launched with
VirtualGL on nVidia GPUs would fail to obtain a visual if `VGL_SAMPLES` was
greater than 0.  Multisampling cannot be used with Pixmap rendering, and
because nVidia's drivers export different FB configs for `GLX_PBUFFER_BIT` and
`GLX_PBUFFER_BIT|GLX_PIXMAP_BIT`, it is necessary to specify `GLX_PBUFFER_BIT`
to obtain an FB config that supports multisampling.

3. Fixed a regression caused by 2.4 beta1[2] whereby 32-bit Linux builds of
VirtualGL built with recent compilers would sometimes crash when exiting
certain 3D applications (reported to be the case with Steam) or behave in other
unpredictable ways.

4. Fixed an issue whereby VirtualGL, when used with applications that load
OpenGL functions via dlopen()/dlsym(), would fail to load the "real" GLX/OpenGL
functions from libGL if libvglfaker.so was built with GCC 4.6 or later.

5. Fixed various build issues with Clang.

6. The interposed `dlopen()` function in the Linux version of libdlfaker.so
will now nullify the `RTLD_DEEPBIND` flag, if an application passes that flag
to `dlopen()`.  This prevents an issue whereby an application could call
`dlopen(..., *|RTLD_DEEPBIND)` to load a shared library that uses OpenGL or
X11, thus causing the "real" OpenGL/GLX/X11 functions loaded by that shared
library to supercede VirtualGL's interposed functions, effectively disabling
VirtualGL.

7. Fixed an issue whereby VirtualGL would crash with a GLXBadContextState error
if the 3D application set the render mode to something other than `GL_RENDER`
prior to calling `glXSwapBuffers()`.


2.5.1
=====

### Significant changes relative to 2.5:

1. VirtualGL will no longer report the presence of the `GLX_EXT_swap_control`,
`GLX_EXT_texture_from_pixmap`, or `GLX_SGI_swap_control` extensions to
applications unless the underlying OpenGL library exports the necessary
functions to support those extensions.  This fixes a regression introduced in
VGL 2.4 that caused WINE to crash when running on a system whose OpenGL
implementation lacked the `glXSwapIntervalSGI()` and `glXSwapIntervalEXT()`
functions.  Furthermore, VirtualGL will now report the presence of the
`GLX_EXT_import_context` and `GLX_NV_swap_group` extensions to applications if
the underlying OpenGL library exports the necessary functions to support those
extensions.

2. Fixed compilation errors when building with GCC v6.

3. vglserver_config is now SELinux-aware and will set up the proper file
contexts to allow vglgenkey to run within the GDM startup scripts.  This has
been verified with Red Hat Enterprise Linux and work-alike systems (CentOS,
etc.), but unfortunately the version of GDM that ships in Fedora 22-24 does not
execute the GDM startup scripts at all.  At the moment, the only workaround for
those recent Fedora releases is to use LightDM.

4. Fixed a deadlock that occurred when exiting ANSYS HFSS 2014.  This fix was
an extension of 2.3.3[2], necessitated by the fact that MainWin calls X11
functions from the destructor of one of its shared libraries, which is executed
after the VGL faker has shut down.  Because VGL 2.5.x enables the XCB
interposer by default, we have to ensure that any X11 and XCB functions hand
off immediately to the underlying libraries after the faker has been shut down,
because even if an X11 function is not interposed by VGL, some of the XCB
functions it calls might be.  This issue was also known to affect ANSYS Maxwell
and may have affected other applications that use MainWin.


2.5
===

### Significant changes relative to 2.5 beta1:

1. OS X 10.11 "El Capitan" no longer allows packages to install files under
/usr/bin, and this was preventing the VirtualGL binary package for OS X from
installing on that platform.  The symlinks to vglclient and vglconnect that the
OS X package previously installed under /usr/bin have thus been removed in this
version of VirtualGL.  It will therefore be necessary to invoke vglconnect and
vglclient using the full pathname (/opt/VirtualGL/bin/vglconnect or
/opt/VirtualGL/bin/vglclient) or to add /opt/VirtualGL/bin to the PATH.

2. Fixed a regression introduced by 2.5 beta1[13] that caused certain system
commands (such as uname, hostname, etc.) to crash when running those commands
using vglrun on current Arch Linux spins (glibc 2.22, GCC 5.2.)  This possibly
affected other non-OpenGL, non-X11 applications on other bleeding-edge Linux
distributions as well.

3. vglserver_config should now work properly with MDM (MATE Display Manager),
if its config files are installed in the standard location (/etc/mdm).

4. Fixed a regression introduced in 2.4 that caused vglrun to abort with
`VGL_ISACTIVE=1: is not an identifier` when running on Solaris 10 (or other
systems in which /bin/sh doesn't support `export VAR=value` syntax.)

5. Fixed a regression introduced by 2.5 beta1[3] whereby the VirtualGL faker
would segfault on Solaris if the 3D application called one of the GLX/OpenGL
functions that VirtualGL interposes and the underlying OpenGL library (libGL)
did not implement that function.


2.4.90 (2.5 beta1)
==================

### Significant changes relative to 2.4.1:

1. librrfaker.so has been renamed to libvglfaker.so.  The "rr" designation
dates from before VirtualGL was called "VirtualGL" (i.e. before it became an
open source project), and it is no longer relevant.

2. The symlinks that VirtualGL previously installed for Chromium (the
long-obsolete parallel rendering package, not the web browser) are no longer
included in this release.

3. The mechanism by which VirtualGL loads "real" GLX, OpenGL, X11, and XCB
functions from the respective system libraries has been refactored.  This has
the following ramifications:

    - The "real" version of an interposed GLX/OpenGL/X11/XCB function will
never be loaded until the interposed function is called.
    - `glXProcAddress[ARB]()` is now used to load all "real" GLX/OpenGL
functions from libGL (except for the `glXProcAddress[ARB]()` function itself.)
This maintains the fixes implemented in 2.4[9] as well as the previous
work-arounds for certain buggy libGL implementations that do not export the
`glXBindTexImageEXT()` and `glXReleaseTexImageEXT()` functions in the libGL
symbol table (the latter was specifically known to be an issue with certain
versions of the ATI driver under Ubuntu.)
    - If `-nodl` is passed to vglrun, then libGL will not be loaded into the
application process until/unless the application actually calls a GLX/OpenGL
function.
    - Because XCB functions are now loaded only when needed, the XCB interposer
is no longer distribution-specific.  Therefore, it is now included in the
official VirtualGL binaries.  Furthermore, since the loading and interposing of
XCB symbols is now less intrusive, the XCB interposer is enabled by default (it
can be disabled with `vglrun -xcb`.)
    - Reverted 2.1.3[8], since that fallback mechanism is no longer necessary
with modern versions of the nVidia driver.  The issue in question can still be
worked around by explicitly setting `VGL_GLLIB` and `VGL_X11LIB`.

4. Support for color index rendering emulation has been retired in this version
of VirtualGL.  That feature will continue to be maintained in the 2.4.x branch
on a break/fix basis only.  Even when color index emulation was implemented in
VGL 10 years ago, the applications that needed it were already extremely rare.
Since then, color index rendering has been officially obsoleted in the OpenGL
spec (as of version 3.1 in 2009), and modern Un*x graphics drivers no longer
support it, nor do they generally support PseudoColor X visuals (nVidia still
supports these, but only with transparent overlays.)  Since there is generally
no reasonable way to run color index OpenGL applications without using legacy
hardware or software, it does not make sense to continue supporting these
applications in this version of VirtualGL, particularly given that color index
emulation adds a certain amount of overhead to some OpenGL calls.

5. Added support for DirectColor rendering (DirectColor is similar to
PseudoColor, except that the colormap indices for red, green, and blue can be
specified separately.)  GLXspheres now includes a DirectColor mode, replacing
its previous color index mode.

6. VirtualGL can now be disabled on a display-by-display basis by specifying a
list of X displays to exclude (see the documentation for the `VGL_EXCLUDE`
environment variable.)  This is useful with multi-GPU systems on which a single
application may want to access the GPUs directly for parallel rendering
purposes but use VirtualGL to display the final result.

7. The vglconnect script now accepts an argument of `-e {command}`, which can
be used to specify a remote command to run.  This is useful for situations in
which it is necessary to start a remote process non-interactively with
vglconnect when using the `-s` or `-x` options.

8. The `glXCreateWindow()` function no longer fails when passed the handle of
an X window that was created in a different process or using XCB.  This
specifically fixes issues encountered when attempting to run VLC in VirtualGL,
but other applications may have been affected as well.

9. Fixed a typo in /etc/udev/rules.d/99-virtualgl-dri.rules, which is created
by vglserver_config.  More specifically, the typo caused incorrect group
permissions to be assigned to the framebuffer device when not using the
vglusers group.

10. Certain applications (known to be the case with recent versions of Firefox
with off-main-thread compositing enabled) would crash with the following error
when running in VirtualGL:

        [VGL] ERROR: in readPixels--
        [VGL]    XXX: VirtualDrawable instance has not been fully initialized

    This was due to the application creating a GLX Pixmap and then calling
`XCopyArea()` with the Pixmap prior to performing any OpenGL rendering with it.
In these cases, VirtualGL now treats the Pixmap as a 2D Pixmap until the
application has performed OpenGL rendering with it.

11. glxinfo has been extended to report whether a particular GLX FB config
supports `GLX_BIND_TO_TEXTURE_RGB_EXT` and `GLX_BIND_TO_TEXTURE_RGBA_EXT`, i.e.
whether the FB config can be used with `GLX_EXT_texture_from_pixmap`.

12. vglserver_config should now work properly with SDDM, if its scripts are
installed in the standard location (/usr/share/sddm/scripts).

13. Fixed a deadlock that occurred with applications that use MainWin, or any
other OpenGL applications that load a shared library whose global constructor
calls one of the functions VirtualGL interposes.  This was known to affect
MATLAB and ANSYS DesignModeler v16.1 and later, but it may have affected other
applications as well.

14. Fixed another deadlock that occurred when running ANSYS DesignModeler v16.1
and later, or when running VirtualGL in a Parallels Desktop guest, when
VirtualGL was built with `VGL_FAKEXCB=1` (which is the default.)

15. Fixed a thread safety issue with PBO readback.  The PBO handle and other
variables related to PBO readback were being stored in static variables that
were shared among all OpenGL windows, contexts, and threads, and this was
suspected-- but not yet confirmed-- to have caused a "Could not set PBO size"
error with MetaPost.  This issue may have affected other multi-threaded
applications as well.


2.4.1
=====

### Significant changes relative to 2.4:

1. When an application doesn't explicitly specify its visual requirements by
calling `glXChooseVisual()`/`glXChooseFBConfig()`, the default GLX framebuffer
config that VirtualGL assigns to it now contains a stencil buffer.  This
eliminates the need to specify `VGL_DEFAULTFBCONFIG=GLX_STENCIL_SIZE,8` with
certain applications (previously necessary when running Abaqus v6 and MAGMA5.)

2. VirtualGL will no longer advertise that it supports the
`GLX_ARB_create_context` and `GLX_ARB_create_context_profile` extensions unless
the underlying OpenGL library exports the `glXCreateContextAttribsARB()`
function.

3. Fixed "Invalid MIT-MAGIC-COOKIE-1" errors that would prevent VirtualGL from
working when vglconnect was used to connect to a VirtualGL server from a client
running Cygwin/X.

4. If a 3D application is rendering to the front buffer and one of the
end-of-frame trigger functions (`glFlush()`/`glFinish()`/`glXWaitGL()`) is
called, VirtualGL will no longer read back the framebuffer unless the render
mode is `GL_RENDER`.  Reading back the front buffer when the render mode is
`GL_SELECT` or `GL_FEEDBACK` is not only unnecessary, but it was known to cause
a GLXBadContextState error with newer nVidia drivers (340.xx and later) in
certain cases.

5. Fixed a deadlock that occurred in the multi-threaded rendering test of
fakerut when it was run with the XCB interposer enabled.  This was due to
VirtualGL attempting to handle XCB events when Xlib owned the event queue.  It
is possible that this issue affected or would have affected real-world
applications as well.

6. Fixed an issue that caused certain 3D applications (observed with
CAESES/FFW, although others were possibly affected as well) to abort with
`ERROR: in TempContext-- Could not bind OpenGL context to window (window may
have disappeared)`.  When the 3D application called `glXChooseVisual()`,
VirtualGL was choosing a corresponding FB config with
`GLX_DRAWABLE_TYPE=GLX_PBUFFER_BIT` (assuming that `VGL_DRAWABLE=pbuffer`,
which is the default.)  This is incorrect, however, because regardless of the
value of `VGL_DRAWABLE`, VirtualGL still uses Pixmaps on the 3D X server to
represent GLX Pixmaps (necessary in order to make `GLX_EXT_texture_from_pixmap`
work properly.)  Thus, VGL now chooses an FB config that supports both Pbuffers
and Pixmaps.  This was generally only a problem with nVidia drivers, because
they export different FB configs for `GLX_PBUFFER_BIT` and
`GLX_PBUFFER_BIT|GLX_PIXMAP_BIT`.


2.4
===

### Significant changes relative to 2.4 beta1:

1. Fixed an issue that prevented recent versions of Google Chrome/Chromium from
running properly in VirtualGL.

2. `VGL_SYNC` now affects `glFlush()`.  Although this does not strictly conform
to the OpenGL spec (`glFlush()` is supposed to be an asynchronous command), it
was necessary in order to make certain features of Cadence Allegro work
properly.  Since virtually no applications require `VGL_SYNC`, it is believed
that this change is innocuous.

3. Fixed a regression in vglconnect (introduced in VirtualGL 2.3) that
prevented `vglconnect -x` from working properly if the user did not have access
to the current directory (vglconnect was erroneously creating a temporary file
in the current directory instead of in /tmp.)

4. GLXspheres now warns if the specified polygon count would exceed the limit
of 57600 polygons per sphere imposed by GLU and prints the actual polygon count
with this limit taken into account.  Also, a new option (`-n`) has been
introduced to increase the sphere count.

5. VirtualGL will now only enable color index rendering emulation if a color
index context is current.  This specifically fixes an interaction issue with
MSC Mentat, which occasionally calls `glIndexi()` when an RGBA context is
current, but the fix may affect other applications as well.

6. VirtualGL can now interpose enough of the XCB API to make Qt 5 work
properly.  Qt 5 does not use XCB to perform 3D rendering (there is no suitable
XCB replacement for GLX yet), but it does use XCB to detect whether the GLX
extension is available and to handle the application's event queue(s).  Thus,
when attempting to run Qt 5 applications in VirtualGL, previously the OpenGL
portion of the window would fail to resize when the window was resized, or the
application would complain that OpenGL was not available and fail to start, or
the application would fall back to non-OpenGL rendering.

    Currently, enabling XCB support in VirtualGL requires building VirtualGL
from source and adding `-DVGL_FAKEXCB=1` to the CMake command line.  The XCB
interposer is also disabled by default at run time.  It must be enabled by
setting the `VGL_FAKEXCB` environment variable to `1` or passing `+xcb` to
vglrun.

7. Fixed a deadlock that occurred when running compiz 0.9.11 (and possibly
other versions as well) with VirtualGL.  The issue occurred when compiz called
`XGrabServer()`, followed by `glXCreatePixmap()` and `glXDestroyPixmap()`.  In
VirtualGL, a GLX pixmap resides on the 3D X server, but the corresponding X11
pixmap resides on the 2D X server.  Thus, VirtualGL has to synchronize pixels
between the two pixmaps in response to certain operations, such as
`XCopyArea()` and `XGetImage()`, or when the GLX pixmap is destroyed.
VirtualGL was previously opening a new connection to the 2D X server in order
to perform this synchronization, and because the 2D X server was grabbed,
compiz locked up when VirtualGL called `XCloseDisplay()` on the new display
connection.  In fact, however, the new display connection was unnecessary,
since the GLX/X11 pixmap synchronization occurs within the 3D rendering thread.
Thus, VirtualGL now simply reuses the same display connection that was passed
to `glXCreate[GLX]Pixmap()`.

8. NetTest and TCBench for Windows are now supplied in a package called
VirtualGL-Utils, which can be built from the VirtualGL source.  When the
VirtualGL Client for Exceed was discontinued, these utilities ceased to have a
home, but they are still useful tools to have, irrespective of the thin client
solution that is being used.  The Windows build of TCBench was temporarily
moved into the Windows TurboVNC Viewer packages, but it proved to be a pain to
keep the source code synchronized between the two projects.

    The VirtualGL-Utils package additionally contains a WGL version of
GLXspheres, which is a useful tool to have when benchmarking Windows virtual
machines that are running in a VirtualGL environment.

9. Worked around an issue in recent versions of SPECviewperf and FEMFAT
visualizer that caused them to segfault when used with VirtualGL.  Those
applications apparently use a dynamic loading mechanism for OpenGL extension
functions, and this mechanism defines symbols such as "glGenBuffers" at file
scope.  Any symbol exported by an application will override a symbol of the
same name exported by a shared library, so when VirtualGL tried to call
`glGenBuffers()`, `glBindBuffer()`, etc., it was picking up the symbols from
the application, not from libGL (and those symbols from the application were
not necessarily defined.)  VirtualGL now obtains the function pointers it needs
for PBO readback directly from libGL using `glXProcAddress()`, rather than
relying on the dynamic linker to resolve them.  Note that this issue could be
worked around in previous versions of VirtualGL by setting `VGL_READBACK=sync`.


2.3.90 (2.4 beta1)
==================

### Significant changes relative to 2.3.3:

1. The VirtualGL Client for Exceed has been retired.  It will continue to be
maintained in the 2.3.x branch on a break/fix basis only.  Cygwin/X has matured
to the point that it now provides an adequate solution for using the VirtualGL
Client on Windows, with the only major limitation being lack of quad-buffered
stereo support.  That feature alone is insufficient to justify a code base
that is basically twice as complex as it otherwise would be.  Furthermore, we
are now maintaining our own Cygwin repository for the VirtualGL Client, which
makes it relatively easy to install on that platform.

    The VirtualGL Client for Exceed reflects VirtualGL's origins as an add-on
technology for existing remote X environments.  These days, most people use
VirtualGL with some sort of X proxy instead.  There have been no significant
changes to vglclient since version 2.2.1, as most of the efforts of The
VirtualGL Project in recent years have focused on the server-side components
and TurboVNC.  In the early days of the project, there were performance
advantages to the VGL Transport, but that is no longer the case.  In fact,
TurboVNC will generally do a better and faster job of compressing the image
stream, since it uses a hybrid compression scheme rather than pure JPEG.

    The native Windows version of TCBench, which previously shipped with the
VirtualGL Client for Exceed, has been moved into the Windows TurboVNC Viewer
package.

2. The VirtualGL source code has been extensively refactored to use more modern
variable, class, and method naming conventions, and automated test scripts for
the utility libraries and the faker have been added.

3. `glXChooseFBConfig()` now properly handles the `GLX_FBCONFIG_ID` attribute.
The improper handling of this attribute was known to cause an error
(`Could not find GLX 1.3 config from peer info`) when running the LWJGL
(Lightweight Java Game Library) on AMD GPUs, but it may have affected other
apps as well.

4. The performance of PBO readback on ATI FirePro adapters has been improved
dramatically (close to an order of magnitude.)

5. vglserver_config will now set DRI device permissions properly on systems
that lack an xorg.conf file but have an xorg.conf.d directory.

6. vglserver_config should now work with recent Debian releases.

7. Fixed an issue whereby VirtualGL would not always resize the Pbuffer
corresponding to an Xt or Motif OpenGL widget whenever the widget was resized.

8. The Mac packaging system now uses pkgbuild and productbuild rather than
PackageMaker (which is obsolete and no longer supported.)  This means that
OS X 10.6 "Snow Leopard" or later must be used when packaging VirtualGL,
although the packages produced can be installed on OS X 10.5 "Leopard" or
later.  OS X 10.4 "Tiger" is no longer supported.

9. The "Uninstall VirtualGL" app should once again work on OS X 10.5.

10. Fixed an infinite drawing loop that occurred when running Altair HyperBeam
with VirtualGL.  Since 2.1.3, VirtualGL has been setting the `WM_DELETE_WINDOW`
property on any OpenGL window so that it (VGL) can be notified if the window
manager deletes the window (thus preventing VGL from trying to draw to the
window after it disappears.)  This was originally done within the body of
`XCreate[Simple]Window()`, but Java did not like us overriding the property for
2D windows (refer to 2.3.1[9].)  Thus, the setting of `WM_DELETE_WINDOW` was
moved into the body of `glXMake[Context]Current()` so that it would affect only
OpenGL windows.  However, VGL was incorrectly replacing the list of WM
protocols rather than simply adding `WM_DELETE_WINDOW` to the existing list.
VGL was also not checking whether `WM_DELETE_WINDOW` already existed in the
list before adding it.  For reasons that are not well understood, this caused
HyperBeam to get into an infinite loop, because calling `XSetWMProtocols()`
within the body of `glXMakeCurrent()` seemed to cause the application to call
`glXMakeCurrent()` again.  This issue may have affected other applications as
well.

11. Fixed an issue whereby the RPMs generated by VirtualGL's packaging system
(including the official RPMs for VGL 2.3.2 and 2.3.3) could not be installed on
later Fedora releases.

12. Fixed an issue whereby `glXSwapBuffers()` would not work properly unless
the drawable passed to that function was current.  This specifically fixes a
rendering issue with voreen, but it may have affected other apps as well.

13. Fixed an issue that prevented vglgenkey from working properly on Red Hat
Enterprise Linux 7.

14. Fixed an issue that prevented vglserver_config from working properly on
Ubuntu 14.04.


2.3.3
=====

### Significant changes relative to 2.3.2:

1. VirtualGL will no longer throw an exception if a 3D application calls
certain X11 and GLX functions with a NULL argument.  It will instead allow the
underlying X11 or GLX library to handle the error.  This specifically works
around an issue with Fiji.

2. Worked around an issue whereby, when ANSYS Workbench 14.5 was run with
VirtualGL, subprocesses (such as the geometry editor) launched from within the
Workbench environment would not exit properly (and thus would become zombies.)
This issue also affected ANSYS HFSS, which would either lock up when exiting or
print an error message:
`terminate called after throwing an instance of 'rrerror'`.

3. Worked around an issue whereby, when using MAGMA5 with VirtualGL, the second
and subsequent perspectives opened within the application would not always
display correctly.

4. Added support for the `GLX_EXT_texture_from_pixmap` extension.

5. Added support for the `GLX_EXT_swap_control` and `GLX_SGI_swap_control`
extensions and a new configuration variable (`VGL_REFRESHRATE`) that can be
used to control them.  See the User's Guide for more information.

6. Added support for depth=32 visuals and FB configs.

7. Added a new "window manager" mode that disables certain features in
VirtualGL that interfere with 3D window managers such as compiz.  This,
combined with [6] and [4] above, should allow compiz to run properly with this
version of VirtualGL, provided that the 2D X Server has support for the X
Composite extension.  See the User's Guide for more information.

8. Fixed a BadDrawable X11 error that occurred when running the Steam client in
VirtualGL.

9. Improved the accuracy of TCBench and CPUstat.

10. Streamlined VirtualGL's behavior when it is installed from source:

    - vglrun now works regardless of where the faker libraries have been
installed.  The build system hard-codes the value of the `VGL_LIBDIR` CMake
variable into a script that vglrun invokes so that it can add this directory to
`LD_LIBRARY_PATH`.   If the faker libraries are installed into a system library
directory, then packagers can choose to omit the new script, and vglrun will
continue to work as it always has.
    - Whenever a 64-bit build is installed, glxspheres is now renamed
glxspheres64, per the convention of the official packages.  This makes it
possible to install a 32-bit and a 64-bit version of VirtualGL into the same
directory.
    - If the install prefix is set to the default (/opt/VirtualGL), then the
build system defaults to installing faker libraries from a 32-bit build into
/opt/VirtualGL/lib32 and faker libraries from a 64-bit build into
/opt/VirtualGL/lib64.
    - Similarly, if the install prefix is set to the default (/opt/VirtualGL),
then the build system defaults to installing the 32-bit libGL symlink for
Chromium into /opt/VirtualGL/fakelib32 and the 64-bit libGL symlink for
Chromium into /opt/VirtualGL/fakelib64.

11. PBO readback mode is now enabled by default.  Further research has shown
that professional-grade GPUs always benefit from PBOs being enabled (quite
dramatically, in the case of AMD FirePro adapters.)  With consumer-grade AMD
adapters, PBOs generally do no harm, and with consumer-grade nVidia (GeForce)
adapters, the results are mixed.  The GeForce drivers will fall back to
blocking readbacks if the pixel format requested in `glReadPixels()` doesn't
match the pixel format of the Pbuffer, so PBOs will generally be slower in
those cases.  Thus, VirtualGL now falls back to synchronous readback mode if it
detects that PBOs are not behaving asynchronously.

    Furthermore, `VGL_FORCEALPHA` is no longer enabled by default when PBOs are
enabled.  This option was introduced because of the GeForce behavior mentioned
above, but the option has no effect whatsoever with the professional-grade GPUs
that are recommended for use with VirtualGL.  Instead, VGL will now detect
situations in which `VGL_FORCEALPHA` might be beneficial and suggest enabling
or disabling it (if `VGL_VERBOSE=1`.)

12. This version of VirtualGL provides a binary package and full support for
Cygwin64.


2.3.2
=====

### Significant changes relative to 2.3.1:

1. Added new stereo options, including green/magenta and blue/yellow anaglyphic
as well as three half-resolution passive stereo options that can be used to
drive 3D TV's.

2. The 32-bit supplementary package for amd64 Debian systems should now work
properly on MultiArch-compatible systems (such as Ubuntu 11 and later.)

3. vglserver_config should now work properly with LightDM.

4. VirtualGL was not advertising that it supported the
`GLX_ARB_create_context_profile` extension, even though it does.  This has been
fixed.

5. VirtualGL now uses a separate OpenGL context to perform pixel readback.
This fixes several issues, including an error
(`GL_ARB_pixel_buffer_object extension not available`) when trying to enable
PBO readback with applications that use a 3.x or later OpenGL core profile, and
incorrect rendering in JPCSP and other applications that modify certain pixel
store parameters (such as `GL_PACK_SWAP_BYTES` or `GL_PACK_ROW_LENGTH`) that
VirtualGL wasn't properly handling.

6. `VGL_FORCEALPHA=1` now works properly if the 3D application specifies visual
attributes of `GLX_RED_SIZE`=`GLX_GREEN_SIZE`=`GLX_BLUE_SIZE`=`1`.

7. `glXUseXFont()` has been extended to work with Pbuffers.  Due to an
oversight, VirtualGL would previously abort with an error message if the 3D
application attempted to render text to a Pbuffer that it created.

8. Fixed an issue whereby, when displaying to a 2D X server that lacked the
MIT-SHM extension, the X11 Transport would sometimes fail to resize its
internal Pixmap (used for double buffering) whenever the X window was resized.
This specifically caused OpendTect to display only a portion of its 3D view
whenever it resized its 3D window after a "Restore" operation, but the issue
may have affected other applications as well.

9. Previously, 3D applications running in VirtualGL could not successfully use
`XGetImage()` to obtain the rendered 3D pixels from a GLX pixmap.  This has
been fixed.

10. vglrun now automatically sets an environment variable that disables the
execution of the VBoxTestOGL program in VirtualBox 4.2 and later.  Since
`LD_PRELOAD` is not propagated down to VBoxTestOGL whenever VirtualBox launches
it (because VirtualBox is a setuid-root executable), VBoxTestOGL always fails
in a VirtualGL environment, which makes VirtualBox believe that the system has
no 3D support.  With version 4.1.10, VirtualBox began running VBoxTestOGL every
time a VM was launched, which effectively prevented VBox from being used with
VirtualGL unless the user hacked their system by symlinking /bin/true to
/usr/lib/virtualbox/VBoxTestOGL.


2.3.1
=====

### Significant changes relative to 2.3:

1. Worked around a segfault that occurred when running CoreBreach.

2. VirtualGL now properly handles implicit deletion of windows/subwindows via
`XCloseDisplay()`, implicit deletion of subwindows via `XDestroyWindow()`, and
explicit deletion of subwindows via `XDestroySubwindows()`.  This specifically
addresses BadDrawable errors that occurred when running certain applications
in WINE 1.3.34 and later.

3. Fixed a crash in `glXCreateGLXPbufferSGIX()` that occurred when a NULL
attribute list pointer was passed to it.

4. VirtualGL should now build and run properly on FreeBSD.

5. VirtualGL now works properly with applications that dynamically load libX11.
This specifically fixes several issues that occurred when running SDL-based
applications against a version of libSDL that was configured with
`--enable-x11-shared`.

6. Changed the Debian package names to lowercase ("virtualgl" and
"virtualgl32") to avoid an issue whereby the package was always being
installed, even if the installed version was up to date.

7. vglserver_config now works properly with KDM on RHEL/CentOS 5 systems.

8. Added a new option (`VGL_GLFLUSHTRIGGER`) that, when set to `0`, will cause
VirtualGL to ignore `glFlush()` commands from the 3D application.  This is
intended for rare applications that do front buffer rendering and use
`glFlush()` as an "intermediate" synchronization command but then subsequently
call `glFinish()` to indicate the end of the frame.

9. Fixed an issue whereby drag & drop operations in certain Java applications
would cause VNC servers (any VNC server, not just TurboVNC) to hang whenever
the Java application was run using VirtualGL.


2.3
===

### Significant changes relative to 2.3 beta1:

1. Fixed a regression whereby GLXSpheres would ignore the first argument after
`-fs`.

2. `glXChooseFBConfig()` and `glXChooseFBConfigSGIX()` were erroneously
returning an error when a NULL attribute list pointer was passed to them.  They
now behave correctly.

3. Fixed a regression whereby VirtualGL would deadlock when using the X11
Transport with a remote X connection.

4. Fixed a `GL_INVALID_OPERATION` error that would occur after a call to
`glXSwapBuffers()`, when a context with the OpenGL Core Profile was being used.

5. Fixed an issue whereby VirtualGL, when compiled with GCC 4.6, would abort
with `terminate called after throwing an instance of 'rrerror'` whenever a 3D
application running in VirtualGL exited.

6. Added a new configuration option (`VGL_DEFAULTFBCONFIG`) that can be used
to manually specify the rendering attributes of the default FB config that
VirtualGL uses whenever a 3D application does not specify a desired set of
visual attributes (which it would normally do by calling `glXChooseVisual()`.)
Refer to the User's Guide for more information.

7. Worked around an issue whereby using very large fonts with `glXUseXFont()`
would cause Pixmap allocation failures with certain X servers.


2.2.90 (2.3 beta1)
==================

### Significant changes relative to 2.2.1:

1. Re-fixed issue that caused MainWin-based applications to hang.  This was
initially fixed in VGL 2.1 final, but it was re-broken by the rewrite of the
global faker configuration routines in VGL 2.2.

2. Overhauled the way in which VirtualGL handles Pixmap rendering, mainly to
fix interaction issues with Mathematica.

3. Added an option (`VGL_ALLOWINDIRECT`) that, when enabled, will cause
VirtualGL to honor an application's request to create an indirect OpenGL
context.  Normally VirtualGL forces all contexts to be direct for performance
reasons, but this causes problems with certain applications (notably
Mathematica 7.)

4. Added two new command-line options to GLXSpheres that allow the window size
to be changed and the total number of frames to be specified (the application
will abort after the total number of frames has been rendered.)

5. VirtualGL will no longer die if `glXGetConfig()` or `glXGetFBConfigAttrib()`
is passed a NULL argument.

6. Fixed a BadMatch X11 error that occurred when an application attempted to
apply a new OpenGL rendering context to a drawable and the FB config of the new
OpenGL context differed from that of a context that was previously applied to
the same drawable.  This specifically was known to affect D3D applications
running in WINE.

7. CMake-based build and packaging system

8. TCBench now takes 100 samples/second by default instead of 50.

9. Added support for the `GLX_ARB_create_context` extension.


2.2.1
=====

### Significant changes relative to 2.2:

1. A 64-bit version of the VirtualGL Client for Exceed is now fully supported.

2. Fixed a severe readback performance problem that occurred whenever an
application set the render mode to `GL_SELECT` and called `glFlush()` while
doing front buffer rendering.

3. vglserver\_config will now work properly whenever vglgenkey is installed in
a directory other than /usr/bin or /opt/VirtualGL/bin, as long as vglgenkey is
installed in the same directory as vglserver_config.

4. vglconnect now allows the user to specify the directory in which VirtualGL
binaries are installed on the server, rather than always assuming that they are
installed in /opt/VirtualGL/bin.

5. Fixed issues with vglconnect.bat that occurred when it was installed under
c:\Program Files (x86) on 64-bit Windows systems and invoked with the `-x` or
`-s` options.

6. Clarified the documentation of the `VGL_DISPLAY` option and documented how
to use VirtualGL with multiple graphics cards.

7. VirtualGL will no longer die if `glXDestroyContext()` is passed a NULL
argument.

8. Fixed a BadWindow error that would occur whenever a 3D application attempted
to call `glXSwapIntervalSGI()` (specifically, this was observed when running
Direct3D applications using WINE 1.3.11 or later.)  The nVidia GLX
implementation requires that a window be current (not a Pbuffer) when calling
`glXSwapIntervalSGI()`, so VirtualGL now interposes that function and makes it
a no-op.

9. Fixed an issue whereby, if a 3D application set
`GL_(RED|GREEN|BLUE|ALPHA)_SCALE` or `GL_(RED|GREEN|BLUE|ALPHA)_BIAS` to
non-default values, the colors would appear wrong when running the application
in VirtualGL, and the readback performance would be very slow.

10. Fixed an issue whereby 3D applications that requested an overlay visual
would fail with BadRequest or other X11 errors if the 2D X server lacked GLX
support (as is the case with TurboVNC.)  This was caused by the fact that
VirtualGL passes through `glXChooseVisual()` and related calls to the 2D X
server if it detects that an overlay visual is being requested.  Now, VirtualGL
will first check that the 2D X server supports GLX before passing through those
calls.

11. `vglclient -kill` and `vglclient -killall` now work (again) in the Exceed
client.


2.2
===

### Significant changes relative to 2.2 beta1:

1. Added an environment variable (`VGL_SPOILLAST`) which, when set to `0`, will
change the frame spoiling algorithm used for frames triggered by `glFlush()`
calls.  This is necessary to make Ansoft HFSS render properly.

2. Added a compatibility mode to allow NetTest to communicate with older
versions of itself (from VGL 2.1.x and prior.)

3. Fixed a race condition in vglclient that would frequently cause an
"incorrect checksum for freed object" error when the client was shut down via
CTRL-C.  This problem was reported only on OS X but could have existed on other
platforms as well.


2.1.90 (2.2 beta1)
==================

### Significant changes relative to 2.1.4:

1. Added an option (`VGL_LOGO`) that, when enabled, will cause VirtualGL to
display a logo in the bottom right-hand corner of the 3D window.  This is meant
as a debugging tool to allow users to determine whether or not VirtualGL is
active.

2. Support for encrypting the VGL Transport with OpenSSL has been removed from
the official VirtualGL packages.  It was only a marginally useful feature,
because VirtualGL also has the ability to tunnel the VGL Transport through SSH.
It was necessary to maintain our own static OpenSSL libraries on Linux in
order to provide a version of VirtualGL that was compatible across all Linux
platforms, and this required us to keep abreast of the latest OpenSSL security
fixes, etc.  OpenSSL support can easily be re-added by building VirtualGL from
source (see [BUILDING.md](BUILDING.md).)

3. Added a framework for creating generic image transport plugins.  See
[server/rrtransport.h](server/rrtransport.h) for a description of the API.

4. Removed support for the proprietary Sun Ray plugin, since that plugin is no
longer available from Sun.

5. For Linux, Mac/Intel, Solaris/x86, and Windows systems, the default build of
VirtualGL no longer uses TurboJPEG/IPP (which was based on the proprietary
Intel Performance Primitives) or Sun mediaLib.  Instead, VirtualGL now uses
libjpeg-turbo, a fully open source SIMD-accelerated JPEG codec developed in
conjunction with the TigerVNC Project (and based on libjpeg/SIMD.)

    As a result of this, it is no longer necessary to install a separate
TurboJPEG package on Linux systems.

6. Added a universal 32/64-bit VirtualGL Client binary for OS X.  The 32-bit
fork works on 10.4 "Tiger" or later, and the 64-bit fork works on 10.5
"Leopard" or later.

7. Added support for encoding 3D images as I420 YUV and displaying them through
X Video.  The images can either be displayed directly to the 2D X server or
sent through the VGL transport for display using vglclient.  See the User's
Guide for more details.

8. Renamed /etc/modprobe.d/virtualgl to /etc/modprobe.d/virtualgl.conf to
comply with the Ubuntu standard.

9. Added an environment variable (`VGL_SAMPLES`) and command-line switch
(`vglrun -ms`) to force VirtualGL to select a multisampled visual or override
the level of multisampling selected by the 3D application.

10. The uninstall script in the Mac binary package should now work on OS X
10.6.

11. VirtualGL can now use pixel buffer objects (PBO's) to accelerate the
readback of the rendered 3D pixels.  This particularly helps when multiple
users are sharing the GPU.  See the "Advanced Configuration" section of the
User's Guide for more information.

12. On Linux systems, this version of VirtualGL works around the interaction
issues between libdlfaker.so and VirtualBox, thus eliminating the need to
specify `CR_SYSTEM_GL_PATH` or to run the VirtualBox application using
`vglrun -nodl`.

13. This version of VirtualGL provides a binary package, documentation, and
full support for Cygwin/X.

14. Fixed an error (`free(): invalid pointer`) that occurred whenever an
application called `XCloseDisplay()` and the `VGL_XVENDOR` environment variable
was set.

15. VirtualGL should now work properly when used with applications that render
to framebuffer objects (FBO's.)

16. vglconnect.bat should now work properly on 64-bit Windows systems.
Previously, it would fail if it was installed under the "Program Files (x86)"
directory.

17. Added a `-gid` option to vglserver_config to allow the group ID of the
vglusers group to be specified, if that group must be created.

18. TCBench should now work properly on OS X.


2.1.4
=====

### Significant changes relative to 2.1.3:

1. Fixed a regression in vglserver_config that caused a "binary operator
expected" error when restricting framebuffer device access to the vglusers
group.

2. Fixed an issue in vglserver_config whereby the device permissions were not
being set correctly on SuSE Linux Enterprise Desktop 11.

3. VGL should now properly ignore `GLX_BUFFER_SIZE` if an application attempts
to specify it when requesting a true color visual.  Specifically, this allows
the Second Life SnowGlobe client to run properly in VGL and WINE.

4. vglserver_config should now work even if /sbin and /usr/sbin are not in the
PATH.

5. The Solaris 10/x86 version of VirtualGL should now work properly with the
nVidia 18x.xx series drivers.

6. Fixed a memory leak that occurred when running VirtualGL in quad-buffered
stereo mode.

7. The DRI device permissions in RHEL 5 were being overridden whenever a user
logged in, because RHEL 5 uses a file in /etc/security/console.perms.d to
specify the default DRI permissions rather than using
/etc/security/console.perms.  vglserver_config has been modified to handle
this.

8. Added an option to vglconnect on Linux/Unix to allow it to use gsissh from
the Globus Toolkit instead of the regular ssh program.


2.1.3
=====

### Significant changes relative to 2.1.2:

1. VirtualGL 2.1.2 printed numerous "Cannot obtain a Pbuffer-enabled 24-bit FB
config ..." error messages when starting Google Earth.  This has been fixed,
and the message has been changed to a warning and clarified.  These error
messages were printed whenever Google Earth called VirtualGL's interposed
version of `glXChooseVisual()` and that function subsequently failed to obtain
an appropriate visual for performing 3D rendering.  However, this is not
necessarily an error, because applications will sometimes call
`glXChooseVisual()` multiple times until they find a visual with desired
attributes.

2. Changed the matching criteria in VirtualGL's interposed version of
`dlopen()`.  In previous versions of VirtualGL, any calls to
`dlopen("*libGL*", ...)` would be replaced with a call to
`dlopen("librrfaker.so", ...)`.  This caused problems with VisIt, which has a
library named "libGLabelPlot.so" that was being interposed by mistake.  The
matching criteria has been changed such that `dlopen()` only overrides calls to
`dlopen("libGL\.*", ...)` or `dlopen("*/libGL\.*", ...)`.

3. vglserver_config should now work properly with DRI-compatible graphics
drivers (including ATI.)

4. VirtualGL's interposed version of `dlopen()` will now modify calls to
`dlopen("libdl*", ...)` as well as `dlopen("libGL*", ...)`.  This is to work
around an interaction issue with v180.xx of the nVidia accelerated 3D drivers
and WINE.

5. Fixed an interaction issue with QT4 in which VirtualGL would not properly
handle window resize events under certain circumstances.

6. Moved `dlopen()` back into a separate faker library (libdlfaker.so.)
libdlfaker.so is loaded by default, which should maintain the behavior of VGL
2.1.2.  However, it can be disabled by passing an argument of `-nodl` to
vglrun.  The latter is necessary to make VirtualBox 2.2.x work with VirtualGL.

7. vglserver_config should now work properly on Ubuntu 9.04 when using gdm or
kdm.  It should also (mostly) work on Fedora 11 (disabling XTEST does not work
on Fedora 11 when using gdm.)

8. Added fallback logic to VirtualGL's symbol loader, which will now try to
directly load the GLX/OpenGL symbols from libGL.so.1 and the X11 symbols from
libX11.so.6 if loading those symbols using `dlsym(RTLD_NEXT, ...)` fails.  This
is to work around an issue with version 18x.xx of the nVidia Linux Display
Driver.

9. If an application window was destroyed by the window manager, and the
application did not explicitly monitor and handle the `WM_DELETE` protocol
message, then previous versions of VirtualGL would, when using the X11 Image
Transport, generally abort with an X11 BadDrawable error.  This occurred
because the window was basically being ripped out from underneath VirtualGL's
blitter thread without warning.  This version of VirtualGL has been modified
such that it monitors `WM_DELETE` messages, so VirtualGL can now bow out
gracefully if the 3D application window is closed by the window manager but the
application does not handle `WM_DELETE`.

10. Worked around an interaction issue with IDL whereby the application was
calling `XGetGeometry()` with the same pointer for every argument, and this was
causing VirtualGL to lose the width and height data returned from the "real"
`XGetGeometry()` function.  Subsequently, the Pbuffer corresponding to the main
IDL window would become improperly sized, and the rendering area would not
appear to update.

11. Added an option (`VGL_TRAPX11`) that will cause VirtualGL to gracefully
trap X11 errors, print a warning message when these occur, and allow the
3D application to continue running.


2.1.2
=====

### Significant changes relative to 2.1.1:

1. Fixed a buffer overrun in TurboJPEG/mediaLib that may have caused problems
on Solaris/x86 VirtualGL servers.

2. Integrated libdlfaker.so into librrfaker.so to eliminate the need for
invoking `vglrun -dl`.

3. Developed a proper uninstaller app for the Mac OS X VirtualGL package.

4. Modified `MAXINST` variable in the SUNWvgl Solaris package, to prevent
multiple instances of this package from being installed simultaneously.


2.1.1
=====

This release was historically part of the Sun Shared Visualization v1.1.1
product.

### Significant changes relative to 2.1:

1. Fixed issues that occurred when displaying to the second or subsequent
screens on a multi-screen X server.

2. Updated to the wxWindows Library License v3.1.

3. Added an uncompressed YUV encoding option to the Sun Ray plugin.  This
provides significantly better performance than DPCM on Sun Ray 1 clients, and
it provides significantly better image quality in all cases.  YUV encoding will
generally use about 50% more network bandwidth than DPCM, all else being equal.

4. Further optimized the Huffman encoder in the mediaLib implementation of
TurboJPEG.  This should decrease the CPU usage when running VirtualGL on
Solaris VirtualGL servers, particularly Solaris/x86 servers running 32-bit
applications.

5. vglconnect now works properly with Cygwin.

6. Fixed a regression that caused VirtualGL to remove any part of the
`VGL_XVENDOR` string following the first whitespace.

7. vglserver_config now works properly with OpenSolaris systems.

8. `glXUseXFont()` now works if a Pixmap is the current drawable.

9. vglserver_config now works properly with Debian Linux systems.

10. Fixed a typo in vglconnect that caused it to leave temporary files lying
about.

11. Removed the libXm (Motif) dependency in the Solaris/x86 version of
VirtualGL.  This mainly affected OpenSolaris systems, on which Motif is not
available.  The libXm dependency was introduced in VirtualGL 2.0.x, because
that version of VirtualGL used libXt (X Intrinsics) to generate its popup
configuration dialog.  Java requires that libXm be loaded ahead of libXt, so it
was necessary to explicitly link the VirtualGL faker library with libXm to
guarantee that the libraries were loaded in the correct order.  Since VirtualGL
2.1.x and later no longer use libXt, the binding to libXm could be safely
removed on x86 systems.  Note, however, that the libXm binding still has to be
included on SPARC systems, because libGL on SPARC depends on libXmu, which
depends on libXt.

12. Fixed an issue with GeomView whereby attempting to resize the oldest window
in a multi-window view would cause the Exceed version of vglclient to crash.

13. When used to configure a Solaris server for GLX mode with open access (all
users being able to access the 3D X server, not just members of the vglusers
group), vglserver_config was incorrectly placing xhost commands at the top of
/etc/dt/config/Xsetup instead of at the bottom.  This could have led to
problems, since xhost is not guaranteed to be in the PATH until the bottom of
that script.

14. VirtualGL should now build and run cleanly on Ubuntu systems (and possibly
other Debian derivatives, although only Ubuntu has been tested.)

15. Certain applications call `glFlush()` thousands of times in rapid
succession when rendering to the front buffer, even if no part of the 3D scene
has changed.  Without going into the gorey details, this caused the VirtualGL
pipeline to become overloaded in certain cases, particularly on systems with
fast pixel readback.  On such systems, every one of the `glFlush()` commands
resulted in VirtualGL drawing or sending a frame, even if the pixels in the
frame were identical to those in the previous frame.  This resulted in
application delays of up to several minutes.  This version of VGL includes a
mechanism that ensures that no more than 100 `glFlush()` commands per second
will actually result in an image being drawn or sent, and thus strings of
rapid-fire `glFlush()` commands can no longer overload the pipeline.

16. vglserver_config should now work with openSUSE systems.

17. It was discovered that `xhost +LOCAL:` is a better method of enabling 3D X
server access to all users of the VirtualGL server.  This method works even if
TCP connections are disabled in the X server (which is the case on recent
Solaris and Linux distributions.)  vglserver\_config has thus been modified to
use this method rather than `xhost +localhost`.  Also, since it is no longer
necessary to set `DisallowTCP=false` in the GDM configuration file,
vglserver_config now comments out this line if it exists.

18. Fixed a deadlock that occurred when using the VirtualGL Sun Ray plugin and
ParaView to render multi-context datasets.

19. Fixed an issue with Mac X11 2.1.x on OS X 10.5 "Leopard" whereby vglconnect
would abort with `Could not open log file.`  X11 2.1.x uses a `DISPLAY`
environment of the form /tmp/launch-*/:0, so it was necessary to remove
everything up to the last slash before using this variable to build a unique
vglclient log file path.

20. Included libgefaker.so in the Solaris VirtualGL packages (oops.)

21. Added an interposed version of `XSolarisGetVisualGamma()` on SPARC servers,
so applications that require gamma-corrected visuals can be fooled into
thinking that a gamma-corrected visual is available, when in fact VirtualGL's
software gamma correction mechanism is being used instead.

22. Fixed a bug in the color conversion routines of TurboJPEG/mediaLib that
caused the Solaris VirtualGL Client to display incorrect pixels along the
right-most edge of the window when 2X or 4X subsampling was used.


2.1
===

This release was historically part of the Sun Shared Visualization v1.1
product.

### Significant changes relative to 2.1 beta1:

1. Windows applications now link statically with OpenSSL, to avoid a dependency
on msvcr71.dll that was introduced in the Win32 OpenSSL 0.9.8e DLLs.
libeay32.dll and ssleay32.dll have been removed from the Windows package, since
they are no longer needed.

2. Implemented a new interposer library (libgefaker.so) which, when active,
will interpose on `getenv()` and return NULL whenever an application queries
the value of the `LD_PRELOAD` environment variable (and, on Solaris, the
`LD_PRELOAD_32` and `LD_PRELOAD_64` environment variables.)  This fools an
application into thinking that no preloading is occurring.  This feature is
currently undocumented and is subject to change, but it can be activated in
this release by passing an argument of `-ge` to vglrun.

3. Extended `VGL_SYNC` functionality to include `glXSwapBuffers()` as well.
This works around a couple of interaction issues between VirtualGL and
AutoForm.  The User's Guide has been updated to explain this new functionality,
to include an app recipe for AutoForm, and to include a warning about the
performance consequences of using `VGL_SYNC` on a remote X connection.

4. Included a short paragraph in the Chromium section of the User's Guide
that explains how to use VirtualGL on the render nodes to redirect 3D rendering
from a window to a Pbuffer.

5. Documented the patch revision necessary to make Exceed 2008 work properly
with VirtualGL.  Removed dire warnings.

6. Added full-screen rendering mode to GLXspheres.

7. Fixed a regression (uninitialized variable) introduced by 2.1 beta1[7].

8. Fixed a logic error that caused vglclient to fail when using OpenGL drawing
and talking to a legacy (VGL 2.0 or earlier) server.

9. Fixed a regression that would cause VGL to deadlock when the user closed the
3D application window while using the X11 Image Transport.

10. Fixed an issue whereby vglserver_config would fail to detect the presence
of GLP because nm was not in the default PATH.

11. When running VirtualGL on Enterprise Linux 5 using the 100 series nVidia
drivers, a normal exit from a 3D application will result in
`glXChannelRectSyncSGIX()` being called after the VirtualGL hashes have already
been destructed.  `glXChannelRectSyncSGIX()` calls `XFree()` (an interposed
function), and under certain circumstances, the interposed version of `XFree()`
was trying (and failing) to access one of the previously destructed VirtualGL
hashes.  This has been fixed.

12. `vglclient -kill` now works properly on Solaris systems.

13. Fixed a timing snafu in-- and raised the run priority of-- the Windows
version of TCBench.  This improves the accuracy of TCBench on Windows in
high-client-CPU-usage scenarios.

14. Fixed an issue in the interactive mode of GLXSpheres whereby it would use
100% of the CPU when sitting idle.  Added an option to GLXSpheres to adjust the
polygon count of the scene.

15. Added app recipes for ANSYS and Cedega to the User's Guide.  Added notes
describing the ANSYS and Pro/E duplicate `glFlush()` issue and workarounds.

16. Changed the default value for `VGL_NPROCS` to `1` (the performance study
indicates that there is no longer any measurable advantage to multi-threaded
compression on modern hardware with VGL 2.1.)

17. Added a `-bench` option to nettest to allow it to measure actual usage on a
given Solaris or Linux network device.  This was necessitated by accuracy
issues with other open source network monitoring solutions.

18. Changed the way global hash tables are allocated in VGL, in order to fix an
interaction issue with applications that are built with MainWin.

19. `vglclient -kill` now works properly on Mac systems.

20. The VirtualGL Configuration dialog now pops up properly when Caps Lock is
active.

21. If a previously destroyed GLX context is passed as an argument to
`glXMake[Context]Current()`, the function now returns False instead of throwing
a fatal exception.  This was necessary to make a couple of different commercial
applications work properly.

22. There was some inconsistency regarding the interface for enabling lossless
compression in the Sun Ray Image Transport.  The User's Guide listed the
interface as `VGL_COMPRESS=srrgb`, whereas the output of vglrun listed the
interface as `-c srlossless`.  VirtualGL 2.1rc only responded to the latter.
This version of VirtualGL now responds to both interfaces, but
`VGL_COMPRESS=srrgb` is the correct and documented interface.  Any errant
references to "srlossless" have been changed.


2.1 beta1
=========

### Significant changes relative to 2.0.1:

1. The VirtualGL Configuration dialog is now implemented using FLTK instead of
X Intrinsics.  The dialog is also now handled by a separate process
(vglconfig), to avoid application interaction issues.  VirtualGL and vglconfig
communicate changes to the configuration through shared memory.

    Note that this renders both the `VGL_GUI_XTTHREADINIT` configuration option
and the corresponding application recipe for VisConcept unnecessary, and thus
both have been removed.

2. Added two new scripts (vglconnect and vgllogin) to automate the process of
connecting to a VirtualGL server and using the VGL Image Transport (formerly
"Direct Mode.")  vglconnect wraps both vglclient and ssh.  Through the use of
command-line arguments, vglconnect can be configured to forward either the X11
traffic or the 3D image traffic (or none or both) over the SSH connection.
vglconnect invokes vgllogin on the server, which configures the server
environment with the proper `VGL_CLIENT` and `VGL_PORT` values so that, once
connected, no further action is required other than to launch a 3D application
with vglrun.  See the User's Guide for more information.

3. vglclient includes many changes to support vglconnect.  Rather than listen
just on ports 4242 and 4243, the default behavior of vglclient is now to find a
free listening port in the range of 4200-4299 (it tries 4242 and 4243 first,
to maintain backward compatibility.)  vglclient records its listening port in
an X property that is later read by the VGL faker.  This feature allows more
than one instance of vglclient to run on the same machine.  The client can also
detach completely from the console and run as a background daemon, exiting only
when the X server resets or when vglclient is explicitly killed.

    Previous versions of VirtualGL required one instance of vglclient to talk
to all X displays on the client machine, but this created problems in
multi-user environments.  Thus, VirtualGL 2.1 runs a separate instance of
vglclient for each unique X display.  This eliminates the need (as well as the
ability) to run vglclient as a root daemon or as a Windows service, and thus
those features have been removed.

    Since vglclient is intended to be launched from vglconnect, Start Menu
links to the VirtualGL Client are no longer included in the Windows package.

    See the User's Guide for more information about the changes to vglclient.

4. The Windows VirtualGL package now includes an optimized version of PuTTY
0.60, which is used by the Windows version of vglconnect.  When tunneling the
3D image stream, this version of PuTTY provides significantly better
performance than the stock version of PuTTY 0.60.

5. Added a new script (vglserver_config) to automate the process of configuring
the VirtualGL server's X display (the 3D X server) to allow connections from
VirtualGL.  This script can also be used to configure GLP, for machines that
support it.  See the User's Guide for more information.

6. The VirtualGL Unix packages now include a benchmark called "GLXSpheres",
which is an open source look-alike of the old nVidia SphereMark demo.  This
program is meant to provide an alternative to GLXGears, since the images
generated by the latter program contain too much solid color to be a good test
of VirtualGL's image pipeline.  GLXSpheres also includes modes that can be used
to test VirtualGL's support of advanced OpenGL features, such as stereo,
overlays, and color index rendering.

7. VirtualGL now works properly with multi-process OpenGL applications that use
one process to handle X events and another process to handle 3D rendering.  In
particular, this eliminates window resize issues with Abaqus/CAE and with the
Chromium readback SPU.

8. Added an additional subsampling option to enable grayscale JPEG encoding.
This provides additional bandwidth savings over and above chrominance
subsampling, since grayscale throws away all chrominance components.  It is
potentially useful when working with applications that already render grayscale
images (medical imaging, etc.)

9. VirtualGL can now encode images as uncompressed RGB and send those
uncompressed images through the VGL Image Transport.  This has two benefits:

     - It eliminates the need to use the X11 Image Transport (AKA "Raw Mode")
over a network, and
     - It provides the ability to send lossless stereo image pairs to a
stereo-enabled client.

    A gigabit or faster network is recommended when using RGB encoding.

10. Anaglyphic stereo support.  When VirtualGL detects that an application has
rendered something in stereo, its default behavior is to try using quad-
buffered stereo.  However, if the client or the image transport do not support
quad-buffered stereo, then VirtualGL will fall back to using anaglyphic
(red/cyan) stereo.  This provides a quick & dirty way to visualize stereo data
on clients that do not support "real" stereo rendering.

    VirtualGL 2.1 can also be configured to send only the left eye or right eye
images from a stereo application.

11. Changed the way VirtualGL spoils frames.  Previous versions would throw out
any new frames if the queue was already busy compressing or sending a previous
frame.  In this release, VirtualGL instead throws out any undisplayed frames in
the queue and promotes every new frame to the head of the queue.  This
ensures that the last frame in a rendering sequence will always be displayed.

12. Better integration with the Sun Ray plugin.  In particular, many of the Sun
Ray plugin's configuration options can now be configured through the VirtualGL
Configuration dialog.

13. The Mac client is now fully documented.

14. Included mediaLib Huffman encoding optimizations contributed by Sun.  This
boosts the performance of VirtualGL on Solaris systems by as much as 30%.\
This, in combination with mediaLib 2.5, should allow the Solaris/x86 version of
VirtualGL to perform as well as the Linux version, all else being equal.

15. Lighting did not work properly for color index applications in prior
versions of VGL.  This has been fixed.

16. Fixed an interaction issue with the 100 series nVidia drivers, whereby
applications that requested a single-buffered RGB visual would sometimes fail
to obtain it through VirtualGL.  The newer nVidia drivers don't always return
an RGB 8/8/8 framebuffer config as the first in the list, so it was necessary
for VirtualGL to specify `GLX_RED_SIZE`, `GLX_GREEN_SIZE`, and `GLX_BLUE_SIZE`
when obtaining a framebuffer config on the VirtualGL server's X display.

17. Interframe comparison now works properly with stereo image pairs, and
interframe comparison can now be disabled by using the `VGL_INTERFRAME` option.


2.0.1
=====

This release was historically part of the Sun Shared Visualization v1.0.1
product.

### Significant changes relative to 2.0:

1. The Linux and Solaris versions of VirtualGL are now statically linked with
OpenSSL.  This fixes an issue whereby a 3D application that uses OpenSSL could
override VirtualGL's SSL bindings, thus causing VirtualGL to crash if SSL was
enabled (`VGL_SSL=1` or `vglrun +s`) and if the application's version of
OpenSSL was incompatible with VirtualGL's.

    This, combined with [5] below, has the added benefit of allowing a single
VirtualGL RPM to be used across multiple Linux platforms.  It is no longer
necessary to use a separate RPM for different versions of Enterprise Linux,
SuSE, etc.

2. librrfaker.so and libturbojpeg.so are now being linked with map files (AKA
"anonymous version scripts" on Linux.)  This is mainly a preventative measure,
because it hides any non-global symbols in the shared objects, thus preventing
those symbols from accidentally interposing on a symbol in an application or in
another shared object.  However, this was also necessary to prevent [1] from
causing the opposite problem from the one it was intended to fix (without [2],
VirtualGL could interpose on an application's SSL bindings rather than vice
versa.)

    Linux users will need to upgrade to TurboJPEG 1.04.2 (or later) to get this
fix.  For other platforms, the fix is included in the VGL 2.0.1 packages.

3. librr.so, rr.h, and the rrglxgears.c sample application have been removed
from the distribution packages.  These demonstrated a strawman API for creating
a VGL movie player.  The API was somewhat ill-conceived and broken, and it
needs to be revisited.

4. VirtualGL's custom version of glxinfo is now included in the distribution
packages, under /opt/SUNWvgl/bin or /opt/VirtualGL/bin.  This version of
glxinfo supports GLP on SPARC servers and also has the ability to query GLX FB
Configs as well as X visuals.

5. VGL now uses direct linking to link against libCrun on Solaris and static
linking to link against libstdc++ on Linux.  This is to prevent a problem
similar to [1], in which an application that overrides the default C++ `new`
and `delete` operators could force VGL to use its custom `new` and `delete`
operators rather than the default operators provided in libCrun/libstdc++.
Specifically, this addresses an issue whereby Pro/E would spuriously crash on
multi-processor Solaris/SPARC machines.

    libstdc++ is statically linked on Linux because Linux has no equivalent of
Direct linking, but static linking against libstdc++ has the added benefit of
allowing one VirtualGL RPM to be used across multiple Linux platforms.

6. Eliminated the use of the X DOUBLE-BUFFER extension in Raw Mode and replaced
it instead with X Pixmap drawing.  Previously, VGL would try to use the MIT-SHM
extension to draw images in Raw Mode, then it would fall back to using the X
DOUBLE-BUFFER extension if MIT-SHM was not available or could not be used (such
as on a remote X connection), then it would fall back to single-buffered
drawing if DOUBLE-BUFFER could not be used.  However, the DOUBLE-BUFFER
extension crashes on some Sun Ray configurations (specifically Xinerama
configurations), so VGL 2.0 disabled the use of DOUBLE-BUFFER on all Sun Ray
configurations to work around this issue.  [6] replaces that hack with a more
solid fix that ensures that Raw Mode is always double-buffered, even if the X
DOUBLE-BUFFER extension is not available or is not working.  Pixmap drawing
has the same performance as DOUBLE-BUFFER.

    This generally only affects cases in which Raw Mode is used to transmit
images over a network.  When Raw Mode is used to transmit images to an X server
on the same machine, it is almost always able to use the MIT-SHM X extension.

7. Numerous doc changes, including:

     - Restructuring the User's Guide to create a more clear delineation
between what needs to be done on the server and what needs to be done on the
client.
     - (Re-)added instructions for how to use VGL with a direct X11 connection,
since it has become apparent that that configuration is necessary in some
cases.
     - Changed procedure for doing Direct Mode SSH tunneling.  The previous
procedure would not have worked if multiple users were trying to tunnel Direct
Mode from the same server.  The new procedure requires running a program (see
[8] below) that prints out an available TCP port, and using that port on the
server end of the SSH tunnel.
     - Added app recipe for ANSA 12.1.0.
     - Added procedures for using VGL with TurboVNC and for using TurboVNC in
general.
     - Added information for using VGL with GLP (which, unbelievably, was never
really included in the User's Guide.  Major oversight on our part.)

8. Modified the nettest program such that it finds a free TCP port number and
prints out the port number to the console when you pass an argument of
`-findport` to the program.

9. Fixed `glXGetProcAddressARB()` and `glXGetProcAddress()` on SPARC platforms.
Due to an erroneous `#ifdef` statement, these interposed functions were not
getting compiled into VirtualGL when VirtualGL was built with Sun OpenGL on
SPARC platforms.

    This, combined with [16], allows Java 2D apps running in VirtualGL on SPARC
platforms to successfully use the OpenGL pipeline to perform Java 2D rendering.

10. Sun OpenGL 120812-15 (and later) now includes a `SwapBuffers()` command for
GLP, which VirtualGL will now use if available.  Some applications that use
front buffer drawing (Pro/E and UGS/NX v4, specifically) did not work properly
with VirtualGL 2.0 in GLP mode, because the back buffer in the double-buffered
Pbuffer was not being swapped.

11. Some applications call `XListExtensions()` rather than `XQueryExtension()`
to probe for the existence of the GLX extension.  Such applications, when
displaying to VNC or another X server that lacks the GLX extension, would fail.
 VirtualGL now interposes on `XListExtensions()` and makes sure that the GLX
extension is always reported as present.  This fixes a specific issue with
UGS/NX v4 whereby NX, if run with VirtualGL and TurboVNC, would refuse to use
OpenGL to perform its 3D rendering.

12. VGL will now print a warning if the GLX context it obtains on the server's
display is indirect.  This will occur on Solaris if the framebuffer device
permissions do not allow read/write access for the current user.

13. Normally, if X11 drawing is the default in the VGL client (which is the
case on non-SPARC systems, on SPARC systems with 2D framebuffers, or on any
system if vglclient is invoked with the `-x` argument), then the VGL client
will only use OpenGL for drawing stereo frames.  This fixes a bug whereby the
VGL client would not switch back to X11 drawing (if X11 drawing was the
default) after the app ceased rendering in stereo.

14. You can now specify a listen port number of 0 to make the VGL client pick
an available port.  This is of only marginal use at the moment, since there is
no way to make the server automatically connect to that port, but we got this
for free as a result of [8].

15. Fixed an issue that was causing the multi-threaded tests in rrfakerut to
crash some of the nVidia 7xxx series drivers.  rrfakerut should now run cleanly
on the 7xxx series, but the multi-threaded tests still cause the 8xxx series
drivers to crash & burn, and they cause the 9xxx series drivers to generate
incorrect pixels.  Further investigation is needed.

16. Fixed two issues that were preventing Java 2D on Solaris/SPARC from
properly detecting that OpenGL is available:

    - `glXChooseFBConfig()` now ignores the `GLX_VISUAL_ID` attribute.  That
attribute doesn't really have any meaning in VGL, and passing it through to the
server's X display was causing Java 2D apps to fail.
    - `glXGetFBConfigAttrib(..., GLX_DRAWABLE_TYPE, ...)` now always returns
`GLX_PIXMAP_BIT|GLX_PBUFFER_BIT|GLX_WINDOW_BIT`, so that Java 2D apps will
properly detect that window rendering is available in VirtualGL.

17. vglrun will now print usage information if you fail to provide an
application command to run.

18. Upgraded the OpenSSL DLL included with the Windows VirtualGL client to
OpenSSL 0.9.8d (previously 0.9.8c.)

19. VirtualGL now buffers the output from the profiler class so that the
profiling output from multiple compression threads doesn't intermingle when
redirected to a log file.

20. If the `DISPLAY` environment variable is unset on the VirtualGL server,
vglrun will now set it automatically to `{ssh_client}:0.0` (where
`{ssh_client}` = the IP address of the SSH client.)  If `DISPLAY` is set to
`localhost:{n}.0` or `{server_hostname}:{n}.0`, VGL assumes that SSH X11
forwarding is in use and sets `VGL_CLIENT={ssh_client}:0.0` instead (without
modifying `DISPLAY`.)  vglrun prints a warning that it is doing this.  You must
still explicitly set `VGL_CLIENT` or `DISPLAY` if you are doing something
exotic, such as tunneling VGL's client/server connection through SSH or
displaying to an X server with a display number other than 0.  But this fix
should eliminate the need to set `VGL_CLIENT` and `DISPLAY` in most cases.
Note that the Sun Ray plugin also reads the `VGL_CLIENT` environment variable,
so if you are connecting to the VirtualGL server from a Sun Ray server using
SSH X11 forwarding, this eliminates the need to explicitly set `VGL_CLIENT` in
that case as well.

21. Implemented the "spoil last frame" algorithm in the Sun Ray plugin whenever
VGL reads back/compresses/sends the framebuffer in response to a `glFlush()`.
This fixes issues with slow model regeneration and zoom operations in Pro/E
when using the Sun Ray plugin.

    Normally, the Sun Ray plugin uses the "spoil first frame" algorithm, which
causes the frames in the queue to be discarded whenever a new frame is
received.  However, this algorithm requires that the framebuffer be read back
every time a frame is rendered, even if that frame is ultimately going to be
spoiled.  This causes problems with applications (Pro/E, specifically) that
call `glFlush()` frequently when doing front buffer drawing.  Each of these
`glFlush()` calls triggers a framebuffer readback in VirtualGL, which can cause
significant interaction delays in the application.  The "spoil last frame"
algorithm discards the newest frame if the queue is currently busy, so when
this algorithm is used, most of the duplicate frames triggered by the repeated
`glFlush()` events are discarded with no framebuffer readback (and thus very
little overhead.)

    This fix does not affect Direct Mode and Raw Mode, since those modes
already use the "spoil last frame" algorithm in all cases.

22. Added an option (`VGL_INTERFRAME`), which, when set to `0`, will disable
interframe image comparison in Direct Mode.  This was necessary to work around
an interaction issue between VGL and Pro/E Wildfire v3 that led to slow
performance when zooming in or out on the Pro/E model.

23. Added an option (`VGL_LOG`), which can be used to redirect the console
output from the VGL faker to a file instead of stderr.

24. The mediaLib implementation of TurboJPEG and the mediaLib-accelerated gamma
correction code have been modified slightly, to avoid calls to mediaLib
functions that wrap `memalign()` and `free()`.  This works around an
interaction issue with Pro/E v3 (and potentially with other applications that
use their own custom memory allocators.)


2.0
===

This release was historically part of the Sun Shared Visualization v1.0
product.

### Significant changes relative to 2.0 beta3:

1. Included libturbojpeg.dylib in Mac package (so that installing the TurboJPEG
package is no longer necessary unless you want to rebuild VGL from source.)

2. Included TCBench and NetTest in the Mac package.

3. Added an internal gamma correction system.  This was a last-minute feature
addition to address the fact that there was no way to gamma-correct
applications that were remotely displayed to non-SPARC clients.  SPARC users
are accustomed to OpenGL applications being gamma-corrected by default, so
VirtualGL now mimics this behavior whenever it is running on a SPARC server,
even if the client machine is not a SPARC machine.

    The behavior of the `VGL_GAMMA` environment variable has changed as
follows:

     - `VGL_GAMMA=1` (or `vglrun +g`):

        Enable gamma correction using the best available method.  If displaying
to a SPARC X server that has gamma-corrected visuals, try to use those
gamma-corrected visuals.  Otherwise, enable VGL's internal gamma correction
system with a gamma correction factor of 2.22.

        This is the default when running applications on SPARC VirtualGL
servers.

     - `VGL_GAMMA=0` (or `vglrun -g`):

        Do not use gamma-corrected visuals (even if available on the X server),
and do not use VGL's internal gamma correction system.

        This is the default when running applications on non-SPARC VirtualGL
servers.

     - `VGL_GAMMA={f}` (or `vglrun -gamma {f}`):

        Do not use gamma-corrected visuals (even if available on the client),
but enable VGL's internal gamma correction system with a gamma correction
factor of {f}.

    Enabling the internal gamma correction system increases CPU usage by a few
percent, but this has not been shown to affect the overall performance of VGL
by a measurable amount.

    See the "VGL_GAMMA" entry in Chapter 18 of the User's Guide for more info.

4. Increased the size of the TurboJPEG compression holding buffer to account
for rare cases in which compressing very-high-frequency image tiles
(specifically parts of the 3D Studio MAX Viewperf test) with high quality
levels (specifically Q99 or above) would produce JPEG images that are larger
than the uncompressed input.

    Linux users will need to upgrade to TurboJPEG 1.04 (or later) to get this
fix.  For other platforms, the fix is included in the VGL 2.0 packages.

5. Minor documentation changes, including a change to the recommended OpenGL
patches for SPARC VGL servers and an application recipe for SDRC I-DEAS Master
Series.

6. Check for exceptions in the `new` operator to prevent VGL from dying
ungracefully in out-of-memory situations.

7. Fixed a bug in the multi-threaded compression code whereby it would use too
much memory to hold the image tiles for the second and subsequent compression
threads.  This led to memory exhaustion if the tile size was set to a low value
(such as 16x16 or 32x32.)


2.0 beta3
=========

### Significant changes relative to 2.0 beta2:

1. Solaris packages now include the OpenSSL shared libraries (libssl and
libcrypto), thus eliminating the need to install Blastwave OpenSSL on Solaris 9
and prior.

2. Packages now include a convenience script (vglgenkey) that will generate an
xauth key for the server's X display.  This provides a more secure way of
granting access to the server's X display than using `xhost +localhost`.

3. Built and packaged the VirtualGL client for Mac OS/X (Intel only.)  This
package is currently undocumented and includes only the VGL client (no server
components), but its usage should be self-explanatory for those familiar with
VGL on other platforms (it should work very similarly to the Linux version.)

4. Normally, when running in Raw Mode, VirtualGL will try to use the MIT-SHM X
extension to draw images.  If MIT-SHM is not available or doesn't work (which
would be the case if the X connection is remote), then VGL will try to use the
X DOUBLE-BUFFER extension.  Failing that, it will fall back to single-buffered
drawing.  In a Sun Ray environment, the X DOUBLE-BUFFER extension is unstable
when Xinerama is used.  DOUBLE-BUFFER doesn't really double-buffer in a Sun Ray
environment anyhow, so this release of VirtualGL disables the use of
DOUBLE-BUFFER if it detects that it is running in a Sun Ray environment.

5. Reformatted User's Guide using [Deplate](http://deplate.sourceforge.net).
Numerous other doc changes as well.

6. Extended VGL to support the full GLX 1.4 spec (this involved simply creating
a function stub for `glXGetProcAddress()`, but it was necessary to make J2D
work under Java 6.)

7. Changed the key sequence for the popup configuration dialog (again) to
CTRL-SHIFT-F9 to avoid a conflict with Solaris Common Desktop Environment.

8. VGL no longer tries to switch to Direct Mode automatically whenever a stereo
frame is rendered.  Instead, if running in Raw Mode, it warns that stereo
doesn't work in Raw Mode and proceeds to send only the left eye buffer.


2.0 beta2
=========

### Significant changes relative to 2.0 beta1:

1. Added a `-dl` option to vglrun, which inserts a new libdlfaker.so interposer
ahead of VirtualGL in the link order.  libdlfaker.so intercepts `dlopen()`
calls from an application and, if the application is trying to use `dlopen()`
to open libGL, librrfaker.so (VirtualGL) is opened instead.  This allows
VirtualGL to be used seamlessly with applications that do not dynamically link
against libGL and do not provide any sort of override mechanism.  See the
User's Guide for a list of known applications that require the `-dl` option.

2. Bug fixed:  Lazy loading of OpenSSL on Solaris now works properly, so
OpenSSL doesn't have to be installed unless VirtualGL is being used in SSL
mode.

3. Added "application recipes" section to User's Guide.

4. Tweaked FBX library to improve performance of VGL when used with NX and
FreeNX.

5. Bug fixed:  TurboJPEG for Solaris did not properly handle 4:2:0
decompression if no pixel format conversion was required.

6. Bug fixed:  Minor (and somewhat esoteric) visual matching bug in GLP mode

7. Bug fixed:  In GLX mode, VGL did not properly handle FB configs that had no
associated X Visual type.

8. Stereo now works on Solaris/SPARC servers using kfb framebuffers in both GLP
and GLX modes.  Sun OpenGL patch 120812-12 (or later) and KFB driver patch
120928-10 (or later) are required.

9. Bug fixed:  In GLX mode, some of the "real" GLX functions that VirtualGL
calls on the server will in turn call `glXGetClientString()`,
`glXQueryExtensions()`, etc. to list extensions available on the server's X
display.  VirtualGL interposes on these functions and returns its own extension
strings rather than the "real" strings from the server's X display, and this
caused problems under certain circumstances.  These interposed functions will
now detect whether they are being called from within another GLX function and
will return the "real" extension strings for the server's X display if so.

10. Generally friendlier error messages

11. Bug fixed:  Destroying an overlay window would cause VGL to seg fault.

12. Changed configuration dialog popup key sequence to CTRL-SHIFT-F12 to avoid
conflict with KDE.

13. Added `VGL_GUI_XTHREADINIT` environment variable to optionally disable
VGL's use of `XtToolkitThreadInitialize()`.  Rarely, a multi-threaded Motif
application relies on its own locking mechanisms and will deadlock if Motif's
built-in application and process locks are enabled.  Thus far, the only known
application that this affects is VisConcept.  Set `VGL_GUI_XTHREADINIT` to `0`
to prevent VisConcept from deadlocking when the VGL config dialog is activated.

14. VirtualGL will no longer allow a non-TrueColor stereo visual to be
selected, because such visuals won't work with the VGL client.  Color index
(PseudoColor) rendering requires Raw Mode, but stereo requires Direct Mode, so
VirtualGL cannot transmit PseudoColor images in stereo.

15. VirtualGL will now automatically select Raw Mode if it detects that it is
running on a "local" display (i.e. ":{n}.0", "unix:{n}.0", etc., but not
"localhost:{n}.0".)  This allows users of X proxies such as Sun Ray, TurboVNC,
NX, etc. to run VirtualGL without having to pass an argument of `-c 0` to
vglrun.  "localhost:{n}.0" is not considered a "local" display, and neither is
"{server_hostname}:{n}.0", because display connections tunneled through SSH
will have a display name that takes on one of those forms.

16. The VirtualGL client for Solaris/SPARC will now automatically detect if it
is running on a framebuffer that uses software OpenGL and will default to using
X11 drawing in that case.  Otherwise, if hardware-accelerated OpenGL is
available, then the VGL client for Solaris/SPARC will try to use OpenGL as the
default drawing method.  This improves performance on the XVR-100 and similar
framebuffers as well as working around a bug in the OGL implementation on
XVR-100 (see CR 6408535.)  Non-SPARC clients still use X11 drawing by default,
except when drawing stereo frames.

17. Worked around some issues in Sun OpenGL that manifested themselves in
instability of the SPARC VirtualGL client when drawing large numbers of
simultaneous frames from different servers.

18. Expanded N1 GridEngine hooks in vglrun so that the `VGL_CLIENT`,
`VGL_COMPRESS`, `VGL_PORT`, `VGL_SSL`, `VGL_GLLIB`, and `VGL_X11LIB`
environment variables will be automatically passed to vglrun by N1GE.  All
other variables must be explicitly passed by using the `-v` option to qsub.

19. Bug fixed:  Lazy loading of OpenGL now works properly on Solaris clients,
so vglclient can be run on machines that don't have OpenGL installed.

20. For some reason, popping up the VGL configuration dialog when running Java
apps caused VGL's Xt resource string to be ignored, which would cause the
widgets to be displayed incorrectly.  Thus, VirtualGL now explicitly specifies
the resources when creating each widget and doesn't rely on the use of a
resource string.
