config SND_BCM2835_SOC_I2S
	tristate "SoC Audio support for the Broadcom BCM2835 I2S module"
	depends on ARCH_BCM2835 || COMPILE_TEST
	select SND_SOC_GENERIC_DMAENGINE_PCM
	select REGMAP_MMIO
	help
	  Say Y or M if you want to add support for codecs attached to
	  the BCM2835 I2S interface. You will also need
	  to select the audio interfaces to support below.

config SND_SOC_CYGNUS
	tristate "SoC platform audio for Broadcom Cygnus chips"
	depends on ARCH_BCM_CYGNUS || COMPILE_TEST
	depends on HAS_DMA
	help
	  Say Y if you want to add support for ASoC audio on Broadcom
	  Cygnus chips (bcm958300, bcm958305, bcm911360)

	  If you don't know what to do here, say N.

config SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD
	tristate "Support for Google voiceHAT soundcard"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_VOICEHAT
	help
          Say Y or M if you want to add support for voiceHAT soundcard.

config SND_BCM2708_SOC_HIFIBERRY_DAC
        tristate "Support for HifiBerry DAC"
        depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
        select SND_SOC_PCM5102A
        help
         Say Y or M if you want to add support for HifiBerry DAC.

config SND_BCM2708_SOC_HIFIBERRY_DACPLUS
        tristate "Support for HifiBerry DAC+"
        depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
        select SND_SOC_PCM512x
        help
         Say Y or M if you want to add support for HifiBerry DAC+.

config SND_BCM2708_SOC_HIFIBERRY_DIGI
        tristate "Support for HifiBerry Digi"
        depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
        select SND_SOC_WM8804
        help
         Say Y or M if you want to add support for HifiBerry Digi S/PDIF output board.

config SND_BCM2708_SOC_HIFIBERRY_AMP
        tristate "Support for the HifiBerry Amp"
        depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
        select SND_SOC_TAS5713
        help
         Say Y or M if you want to add support for the HifiBerry Amp amplifier board.

config SND_BCM2708_SOC_RPI_CIRRUS
        tristate "Support for Cirrus Logic Audio Card"
        depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
        select SND_SOC_WM5102
        select SND_SOC_WM8804
        help
         Say Y or M if you want to add support for the Wolfson and
         Cirrus Logic audio cards.

config SND_BCM2708_SOC_RPI_DAC
        tristate "Support for RPi-DAC"
        depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
        select SND_SOC_PCM1794A
        help
         Say Y or M if you want to add support for RPi-DAC.

config SND_BCM2708_SOC_RPI_PROTO
	tristate "Support for Rpi-PROTO"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_WM8731
	help
	  Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731).

config SND_BCM2708_SOC_JUSTBOOM_DAC
	tristate "Support for JustBoom DAC"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_PCM512x
	help
	  Say Y or M if you want to add support for JustBoom DAC.

config SND_BCM2708_SOC_JUSTBOOM_DIGI
	tristate "Support for JustBoom Digi"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_WM8804
	help
	  Say Y or M if you want to add support for JustBoom Digi.

config SND_BCM2708_SOC_IQAUDIO_DAC
	tristate "Support for IQaudIO-DAC"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_PCM512x_I2C
	help
	  Say Y or M if you want to add support for IQaudIO-DAC.

config SND_BCM2708_SOC_IQAUDIO_DIGI
        tristate "Support for IQAudIO Digi"
        depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
        select SND_SOC_WM8804
        help
         Say Y or M if you want to add support for IQAudIO Digital IO board.

config SND_BCM2708_SOC_RASPIDAC3
	tristate "Support for RaspiDAC Rev.3x"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_PCM512x_I2C
	select SND_SOC_TPA6130A2
	help
	  Say Y or M if you want to add support for RaspiDAC Rev.3x.

config SND_BCM2708_SOC_ADAU1977_ADC
	tristate "Support for ADAU1977 ADC"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_ADAU1977_I2C
	help
	  Say Y or M if you want to add support for ADAU1977 ADC.

config SND_AUDIOINJECTOR_PI_SOUNDCARD
	tristate "Support for audioinjector.net Pi add on soundcard"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_WM8731
	help
	  Say Y or M if you want to add support for audioinjector.net Pi Hat

config SND_AUDIOINJECTOR_OCTO_SOUNDCARD
	tristate "Support for audioinjector.net Octo channel (Hat) soundcard"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_CS42XX8_I2C
	help
	  Say Y or M if you want to add support for audioinjector.net octo add on

config SND_DIGIDAC1_SOUNDCARD
        tristate "Support for Red Rocks Audio DigiDAC1"
        depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
        select SND_SOC_WM8804
        select SND_SOC_WM8741
        help
         Say Y or M if you want to add support for Red Rocks Audio DigiDAC1 board.

config SND_BCM2708_SOC_DIONAUDIO_LOCO
	tristate "Support for Dion Audio LOCO DAC-AMP"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_PCM5102a
	help
	  Say Y or M if you want to add support for Dion Audio LOCO.

config SND_BCM2708_SOC_DIONAUDIO_LOCO_V2
	tristate "Support for Dion Audio LOCO-V2 DAC-AMP"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_PCM5122
	help
	  Say Y or M if you want to add support for Dion Audio LOCO-V2.

config SND_BCM2708_SOC_ALLO_PIANO_DAC
	tristate "Support for Allo Piano DAC"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_PCM512x_I2C
	help
	  Say Y or M if you want to add support for Allo Piano DAC.

config SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS
	tristate "Support for Allo Piano DAC Plus"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_PCM512x_I2C
	help
	  Say Y or M if you want to add support for Allo Piano DAC Plus.

config SND_BCM2708_SOC_ALLO_BOSS_DAC
	tristate "Support for Allo Boss DAC"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_PCM512x_I2C
	help
	  Say Y or M if you want to add support for Allo Boss DAC.

config SND_BCM2708_SOC_ALLO_DIGIONE 
        tristate "Support for Allo DigiOne"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_PCM512x_I2C
	help
	  Say Y or M if you want to add support for Allo DigiOne.

config SND_BCM2708_SOC_FE_PI_AUDIO
	tristate "Support for Fe-Pi-Audio"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_SOC_SGTL5000
	help
	  Say Y or M if you want to add support for Fe-Pi-Audio.

config SND_PISOUND
	tristate "Support for Blokas Labs pisound"
	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
	select SND_RAWMIDI
	help
	  Say Y or M if you want to add support for Blokas Labs pisound.
