Module
Contents
Index 🔎︎

# Mathematical Functions

This category contains the Mathematical functions for Calc. To open the Function Wizard, choose Insert - Function.

## [text/scalc/01/func_aggregate.xhp#aggregate_head not found].

This function returns an aggregate result of the calculations in the range. You can use different aggregate functions listed below. The Aggregate function enables you to omit hidden rows, errors, SUBTOTAL and other AGGREGATE function results in the calculation.

## RAWSUBTRACT

Subtracts a set of numbers and gives the result without eliminating small roundoff errors.

## HOUR

Return a numeric value calculated by a combination of three colors (red, green and blue) and the alpha channel, in the RGBA color system. The result depends on the color system used by your computer.

## [text/scalc/01/func_sumifs.xhp#sumifs_head not found].

Returns the sum of the values of cells in a range that meets multiple criteria in multiple ranges.

## ABS

Returns the absolute value of a number.

### Syntax

ABS(Number)

Number is the value whose absolute value is to be calculated.

### Пример

Entering the value -56 will return an absolute value of 56.

Entering the value 56 will return an absolute value of 56.

The inverse trigonometric sine of -1 returns the value -1.57.

## ACOS

Returns the inverse trigonometric cosine of a number.

### Syntax

ACOS(Number)

Number is the value, whose inverse trigonometric cosine value is to be calculated.

To return the angle in degrees, use the DEGREES function.

### Пример

The inverse trigonometric cosine of -1 returns the value 3.14.

=DEGREES(ACOS(0.5)) returns 60. The cosine of 60 degrees is 0.5.

## ACOSH

Returns the inverse hyperbolic cosine of a number.

### Syntax

ACOSH(Number)

Number is the value whose inverse hyperbolic cosine is to be calculated.

Number must be greater than or equal to 1.

### Пример

The inverse hyperbolic cosine of 1 returns the value 0.

The inverse hyperbolic cosine of 1 returns the value 0.

## ACOT

Returns the inverse cotangent of the given number.

### Syntax

ACOT(Number)

Number is the value whose inverse cotangent is to be calculated.

To return the angle in degrees, use the DEGREES function.

### Пример

The inverse cotangent of -1 returns the value 2.36.

=DEGREES(ACOT(1)) returns 45. The tangent of 45 degrees is 1.

## ACOTH

Returns the inverse hyperbolic cotangent of the given number.

### Syntax

ACOTH(Number)

Number is the value whose inverse hyperbolic cotangent is to be calculated.

An error results if Number is between -1 and 1 inclusive.

### Пример

The inverse hyperbolic cotangent of 1.1 returns the value 1.52.

## ASIN

Returns the inverse trigonometric sine of a number.

### Syntax

ASIN (Number)

Number is the value whose inverse trigonometric sine is to be calculated.

To return the angle in degrees, use the DEGREES function.

### Пример

The inverse trigonometric sine of -1 returns the value -1.57.

The inverse trigonometric tangent of -1 returns the value -0.79.

=DEGREES(ASIN(0.5)) returns 30. The sine of 30 degrees is 0.5.

## ASINH

Returns the inverse hyperbolic sine of a number.

### Syntax

ASINH(Number)

Number is the value whose inverse hyperbolic sine is to be calculated.

### Пример

The inverse hyperbolic sine of -90 returns the value -5.19.

The inverse trigonometric sine of -1 returns the value -1.57.

## ATAN

Returns the inverse trigonometric tangent of a number.

### Syntax

ATAN(Number)

Number is the value whose inverse trigonometric tangent value is to be calculated.

To return the angle in degrees, use the DEGREES function.

### Пример

The inverse trigonometric tangent of -1 returns the value -0.79.

=DEGREES(ATAN(1)) returns 45. The tangent of 45 degrees is 1.

## ATAN2

Returns the inverse trigonometric tangent of the specified x and y coordinates.

### Syntax

ATAN2(Number x; number y)

Number x is the value for the x coordinate.

Number y is the value for the y coordinate.

ATAN2 returns the inverse trigonometric tangent, that is, the angle (in radians) between the x-axis and a line from point NumberX, NumberY to the origin. The angle returned is between -PI and PI.

To return the angle in degrees, use the DEGREES function.

### Пример

Entering the value 45 for the x coordinate and the value 90 for the y coordinate will return an inverse trigonometric tangent of 1.11.

=DEGREES(ATAN2(12.3;12.3)) returns 45. The tangent of 45 degrees is 1.

## ATANH

Returns the inverse hyperbolic tangent of a number.

### Syntax

ATANH(Number)

Number is the value whose inverse hyperbolic tangent is to be calculated.

Number must obey the condition -1 < number < 1.

### Пример

The inverse hyperbolic tangent of 0.99 returns the value 2.65.

## CEILING

Rounds a number up to the nearest multiple of Significance.

### Syntax

CEILING(Number; Significance; Mode)

Number is the number that is to be rounded up.

Significance is the number to whose multiple the value is to be rounded up.

Mode is an optional value. If the Mode value is given and not equal to zero, and if Number and Significance are negative, then rounding is done based on the absolute value of Number, i.e. negative numbers are rounded away from zero. If the Mode value is equal to zero or is not given, negative numbers are rounded towards zero.

If the spreadsheet is exported to Microsoft Excel, the CEILING function is exported as the equivalent CEILING.MATH function that exists since Excel 2013. If you plan to use the spreadsheet with earlier Excel versions, use either CEILING.PRECISE that exists since Excel 2010, or CEILING.XCL that is exported as the CEILING function compatible with all Excel versions. Note that CEILING.XCL always rounds away from zero.

### Пример

=CEILING( -11; -2) returns -10

=CEILING( -11; -2; 0) returns -10

=CEILING( -11; -2; 1) returns -12

## CEILING.MATH

Rounds a number up to the nearest multiple of Significance.

### Syntax

CEILING.MATH(Number; Significance; Mode)

Number is the number that is to be rounded up.

Significance is the number to whose multiple the value is to be rounded up.

Mode is an optional value. If the Mode value is given and not equal to zero, and if Number and Significance are negative, then rounding is done based on the absolute value of Number, i.e. negative numbers are rounded away from zero. If the Mode value is equal to zero or is not given, negative numbers are rounded towards zero.

This function exists for interoperability with Microsoft Excel 2013 or newer.

### Example

=CEILING.MATH(-10;-3) returns -9

=CEILING.MATH(-10;-3;0) returns -9

=CEILING.MATH(-10;-3;1) returns -12

## CEILING.PRECISE

Rounds a number up to the nearest multiple of Significance, regardless of sign of Significance

### Syntax

CEILING.PRECISE(Number; Significance)

Number is the number that is to be rounded up.

Significance is the number to whose multiple the value is to be rounded up.

### Пример

=CEILING( -11; -2) returns -10

## CEILING.XCL

Rounds a number away from zero to the nearest multiple of Significance.

### Syntax

CEILING.XCL(Number; Significance)

Number is the number that is to be rounded.

Significance is the number to whose multiple the value is to be rounded.

This function exists for interoperability with Microsoft Excel 2007 or older versions.

### Example

=CEILING.XCL(1;3) returns 3

=CEILING.XCL(7;4) returns 8

=CEILING.XCL(-10;-3) returns -12

## COMBIN

Returns the number of combinations for a given number of objects.

### Syntax

COMBIN(count 1; count 2)

Count 1 is the total number of elements.

Count 2 is the select count from the elements.

COMBIN returns the number of ordered ways to choose these items. For example if there are 3 items A, B and C in a set, you can choose 2 items in 3 different ways, namely AB, AC and BC.

COMBIN implements the formula: Count1!/(Count2!*(Count1-Count2)!)

### Пример

If you enter 2 in text boxes Count 1 and 2, 1 will be returned as the result.

## COMBINA

Returns the number of combinations for a given number of objects (repetition included).

### Syntax

COMBINA(count 1; count 2)

Count 1 is the total number of elements.

Count 2 is the select count from the elements.

COMBINA returns the number of unique ways to choose these items, where the order of choosing is irrelevant, and repetition of items is allowed. For example if there are 3 items A, B and C in a set, you can choose 2 items in 6 different ways, namely AA, AB, AC, BB, BC and CC.

COMBINA implements the formula: (Count1+Count2-1)! / (Count2!(Count1-1)!)

### Пример

If you enter 2 in text boxes Count 1 and 2, 3 will be returned as the result.

## CONVERT

This function allows you to convert a European currency value into Euros.

### Syntax

CONVERT(value;"Text"; "Text")

Value is the amount in the currency to be converted.

Text is the official abbreviation for the currency in question (for example, "EUR"). The first Text parameter gives the source value to be converted, the second Text parameter gives the destination value.

Full_precision is optional. If omitted or False, the result is rounded according to the decimals of the To currency. If Full_precision is True, the result is not rounded.

Triangulation_precision is optional. If Triangulation_precision is given and >=3, the intermediate result of a triangular conversion (currency1,EUR,currency2) is rounded to that precision. If Triangulation_precision is omitted, the intermediate result is not rounded. Also if To currency is "EUR", Triangulation_precision is used as if triangulation was needed and conversion from EUR to EUR was applied.

### Example:

=CONVERT(100;"ATS";"EUR") converts 100 Austrian Schilling into Euro.

=CONVERT(100;"EUR";"DEM") converts 100 Euro into German Mark.

## CONVERT_OOO

Converts a value from one unit of measurement to another unit of measurement. The conversion factors are given in a list in the configuration.

At one time the list of conversion factors included the legacy European currencies and the Euro (see examples below). We suggest using the new function EUROCONVERT for converting these currencies.

### Syntax

CONVERT_OOO(value;"text";"text")

### Пример

=CONVERT_OOO(100;"ATS";"EUR") returns the Euro value of 100 Austrian Schillings.

=CONVERT_OOO(100;"EUR";"DEM") converts 100 Euros into German Marks.

## COS

Дава косинус на дадениот агол (во радијанси).

### Syntax

COS(Number)

Number is the value whose cosine is to be calculated.

To return the cosine of an angle in degrees, use the RADIANS function.

### Examples

The angle 6.28 (2Pi) returns a cosine of 1.

The angle 3.14 (Pi) returns a cosine of -1.

## COSH

Returns the hyperbolic cosine of a number.

### Syntax

COSH(Number)

Number is the value whose hyperbolic cosine is to be calculated.

### Пример

Entering the value -5 will return a hyperbolic cosine of 74.21.

## COT

Returns the cotangent of the given angle.

### Syntax

COT(Number)

Number is the value whose cotangent is to be calculated.

To return the cotangent of an angle in degrees, use the RADIANS function.

The cotangent of an angle is equivalent to 1 divided by the tangent of that angle.

### Example:

The angle -45 returns a cotangent of -0.62.

The angle 90 returns a cotangent of -0.5.

## COTH

Returns the hyperbolic cotangent of a given number (angle).

### Syntax

COTH(Number)

Number is the value whose hyperbolic cotangent is to be calculated.

### Пример

Entering the value 90 returns a hyperbolic cotangent of 1.

## CSC

Returns the cosecant of the given angle (in radians). The cosecant of an angle is equivalent to 1 divided by the sine of that angle

### Syntax

COSH(Number)

Number is the value whose cosine is to be calculated.

To return the cosecant of an angle in degrees, use the RADIANS function.

### Examples

=CSC(PI()/4) returns approximately 1.4142135624, the inverse of the sine of PI/4 radians.

The angle 3.14 (Pi) returns a cosine of -1.

## CSCH

Returns the hyperbolic cosine of a number.

### Syntax

COSH(Number)

Number is the value whose hyperbolic cosine is to be calculated.

### Пример

=CSCH(1) returns approximately 0.8509181282, the hyperbolic cosecant of 1.

## DEGREES

Converts radians into degrees.

### Syntax

DEG(Number)

Number is the value to be converted.

### Пример

=DEGREES(PI()) returns 180 degrees.

## EVEN

Rounds a positive number up to the nearest even integer and a negative number down to the nearest even integer.

### Syntax

EVEN(number)

Number is the number that is to be rounded.

### Examples

If you enter the number 0.01, 2 will be returned as the result.

If you enter the number 0.01, 2 will be returned as the result.

The inverse trigonometric sine of -1 returns the value -1.57.

If you enter the number 0.01, 2 will be returned as the result.

## EXP

Returns e raised to the power of a number. The constant e has a value of approximately 2.71828182845904.

### Syntax

EXP(number)

Number is the power to which e is to be raised.

### Пример

The result for e raised to the power -4 is 0.02.

## FACT

Returns the factorial of a number. FACT(0) returns 1. FACT(n) returns 1*2*3*4* ... *n.

### Syntax

FACT(number)

Number is the value whose factorial is to be calculated.

=FACT(0) returns 1 by definition.

The factorial of a negative number returns the "invalid argument" error.

### Пример

FACT(10) returns 3628800.

FACT(0) by definition returns 1.

## FLOOR

Rounds a number down to the nearest multiple of Significance.

### Syntax

FLOOR(Number; Significance; Mode)

Number is the number that is to be rounded down.

Significance is the value to whose multiple the number is to be rounded down.

Mode is an optional value. If the Mode value is given and not equal to zero, and if Number and Significance are negative, then rounding is done based on the absolute value of Number, i.e. negative numbers are rounded towards zero. If the Mode value is equal to zero or is not given, negative numbers are rounded away from zero.

If the spreadsheet is exported to Microsoft Excel, the FLOOR function is exported as the equivalent FLOOR.MATH function that exists since Excel 2013. If you plan to use the spreadsheet with earlier Excel versions, use either FLOOR.PRECISE that exists since Excel 2010, or FLOOR.XCL that is exported as the FLOOR function compatible with all Excel versions. Note that FLOOR.XCL always rounds towards zero.

### Пример

=FLOOR( -11; -2) returns -12

=FLOOR( -11; -2; 0) returns -12

=FLOOR( -11; -2; 1) returns -10

## FLOOR.PRECISE

Rounds a number down to the nearest multiple of Significance, regardless of sign of Significance

### Syntax

FLOOR.PRECISE(Number; Significance)

Number is the number that is to be rounded down.

Significance is the value to whose multiple the number is to be rounded down.

### Пример

=FLOOR( -11; -2) returns -12

## GCD

Returns the greatest common divisor of two or more integers.

The greatest common divisor is the positive largest integer which will divide, without remainder, each of the given integers.

### Syntax

GCD(integer 1 to 30)

Integer 1 to 30 are up to 30 integers whose greatest common divisor is to be calculated.

### Пример

If you enter the numbers 512;1024 and 2000 in text boxes Integer 1;2 and 3, 16 will be returned as the result.

=GCD(B1:B3) where cells B1, B2, B3 contain 9, 12, 9 gives 3.

## GCD_EXCEL2003

The result is the greatest common divisor of a list of numbers.

The functions whose names end with _ADD or _EXCEL2003 return the same results as the corresponding Microsoft Excel 2003 functions without the suffix. Use the functions without suffix to get results based on international standards.

### Syntax

GCD_EXCEL2003(Number(s))

Number(s): a list of up to 30 numbers.

### Пример

=GCD_EXCEL2003(5;15;25) returns 5.

## INT

Rounds a number down to the nearest integer.

### Syntax

INT(number)

Number is the number that is to be rounded down to the nearest integer.

Negative numbers round down to the integer below.

### Пример

If you enter the number -0.1, -1 will be returned as the result.

If you enter the number 23.74, 23 will be returned as the result.

## ISO.CEILING

Rounds a number up to the nearest multiple of Significance, regardless of sign of Significance

### Syntax

ISO.CEILING(Number; Significance)

Number is the number that is to be rounded up.

Significance is the number to whose multiple the value is to be rounded up.

### Пример

=CEILING( -11; -2) returns -10

## LCM

Returns the least common multiple of one or more integers.

### Syntax

LCM(integer 1 to 30)

Integer 1 to 30 are up to 30 integers whose lowest common multiple is to be calculated.

### Пример

If you enter the numbers 512;1024 and 2000 in the Integer 1;2 and 3 text boxes, 128000 will be returned as the result.

## LCM_EXCEL2003

The result is the lowest common multiple of a list of numbers.

The functions whose names end with _ADD or _EXCEL2003 return the same results as the corresponding Microsoft Excel 2003 functions without the suffix. Use the functions without suffix to get results based on international standards.

### Syntax

LCM_EXCEL2003(Number(s))

Number(s): a list of up to 30 numbers.

### Пример

=LCM_EXCEL2003(5;15;25) returns 75.

## LN

Returns the natural logarithm based on the constant e of a number. The constant e has a value of approximately 2.71828182845904.

### Syntax

LN(number)

Number is the value whose natural logarithm is to be calculated.

### Пример

The natural logarithm to the base e of the value 3 will return the rounded value of 1.1 as the result.

=GESTEP(5;1) returns 1.

## LOG

Returns the logarithm of a number to the specified base.

### Syntax

LOG(number; base)

Number is the value whose logarithm is to be calculated.

Base is the base for the logarithm calculation.

### Пример

The logarithm of the number 10 to the base 3 will return 2.1 as the result.

If you enter the number -0.1, -1 will be returned as the result.

## LOG10

Returns the base-10 logarithm of a number.

### Syntax

LOG10(number)

Number is the value whose logarithm to the base 10 is to be calculated.

### Пример

The logarithm to the base 10 of the value 3 will return 0.48 as the result.

## MOD

Returns the remainder after a number is divided by a divisor.

### Syntax

MOD(Dividend; Divisor)

Dividend is the value from which to find the remainder after dividing.

Divisor is the number by which to divide the specified value.

### Пример

The value 17 in the Dividend field is to be divided by the divisor -1.4. -1.2 will be returned as the remainder.

Entering the value 56 will return an absolute value of 56.

## MROUND

The result is the nearest integer multiple of the number.

### Syntax

MROUND(Number; Multiple)

Returns Number rounded to the nearest multiple of Multiple.

An alternative implementation would be Multiple * ROUND(Number/Multiple).

### Пример

Which integer multiple of 3 is the number 15.5 closest to?

=MROUND(1.6;0.5) returns 1.5, the nearest integer multiple of 0.5 to approach 1.6.

## MULTINOMIAL

Returns the factorial of the sum of the arguments divided by the product of the factorials of the arguments.

### Syntax

MULTINOMIAL (Number(s))

Number(s): a list of up to 30 numbers.

### Пример

=MULTINOMIAL(F11:H11) returns 1260, if F11 to H11 contain the values 2, 3 and 4. This corresponds to the formula =(2+3+4)! / (2!*3!*4!)

## ODD

Rounds a positive number up to the nearest odd integer and a negative number down to the nearest odd integer.

### Syntax

ODD(number)

Number is the number that is to be rounded.

### Пример

If you enter the number 1.01, 3 will be returned as the result.

If you enter the number 1.01, 3 will be returned as the result.

If you enter the number 1.01, 3 will be returned as the result.

If you enter the number 1.01, 3 will be returned as the result.

## PI

Returns the value of PI (rounded value 3.14159).

### Syntax

PI()

### Пример

Pi is 3.14159... as a rounded value.

## POWER

Returns the result of a number raised to a power.

### Syntax

POWER(base; power) or base ^ power

Base is the number that is to be raised to a given power.

The same result may be achieved by using the exponentiation operator ^:

Base^Exponent

### Пример

If you enter 3 as the base and -2 as the power, 0.11 will be returned as the result.

=4^3 also returns 4 to the power of 3.

## PRODUCT

Multiplies all the numbers given as arguments and returns the product.

### Syntax

PRODUCT(number 1 to 30)

Number 1 to number 30 are up to 30 arguments whose product is to be calculated.

PRODUCT returns number1 * number2 * number3 * ...

### Пример

If you enter the numbers 2; 3 and 4 in the Number 1; 2 and 3 text boxes, 24 will be returned as the result.

## QUOTIENT

Returns the integer result of a division operation.

### Syntax

QUOTIENT(Numerator;Denominator)

Returns the integer part of Numerator divided by Denominator.

QUOTIENT is equivalent to INT(numerator/denominator) for same-sign numerator and denominator, except that it may report errors with different error codes. More generally, it is equivalent to INT(numerator/denominator/SIGN(numerator/denominator))*SIGN(numerator/denominator).

### Пример

=QUOTIENT(11;3) returns 3. The remainder of 2 is omitted.

## RADIANS

Converts degrees to radians.

### Syntax

RADIANS(number)

Number is the angle in degrees.

### Пример

=RADIANS(90) returns 1.5707963267949, which is PI/2 to Calc's accuracy.

## RAND

Returns a random number between 0 and 1.

### Syntax

RAND()

This function produces a new random number each time Calc recalculates. To force Calc to recalculate manually press F9.

To generate random numbers which never recalculate, copy cells each containing =RAND(), and use Edit - Paste Special (with Paste All and Formulas not marked and Numbers marked).

### Пример

=RAND() returns a random number between 0 and 1.

## RANDBETWEEN

Returns an integer random number between Bottom and Top (both inclusive). To recalculate press Shift+Ctrl+F9.

### Syntax

RANDBETWEEN (Bottom; Top)

Returns an integer random number between integers Bottom and Top (both inclusive).

This function produces a new random number each time Calc recalculates. To force Calc to recalculate manually press Shift+CommandCtrl
+F9.

To generate random numbers which never recalculate, copy cells containing this function, and use Edit - Paste Special (with Paste All and Formulas not marked and Numbers marked).

### Пример

=RANDBETWEEN (20;30) returns an integer of between 20 and 30.

## ROUND

Returns a number rounded to a certain number of decimal places.

### Syntax

ROUND(number; count)

number is the number to be rounded.

This function rounds to the nearest number. See ROUNDDOWN and ROUNDUP for alternatives.

### Пример

If you enter the number 17.546 in the number field, with 1 specified as the number of rounding places, 17.5 will be returned as the result.

=ROUND(-32.4834; 3) returns -32.483. Change the cell format to see all decimals.

If you enter the number 17.546 in the number field, with 1 specified as the number of rounding places, 17.5 will be returned as the result.

If you enter the number 1.01, 3 will be returned as the result.

Entering the value 123.343 and the value 2 in the count field will return the value 123.35.

## ROUNDDOWN

Rounds a number down, toward zero.

### Syntax

ROUNDDOWN(number; count)

number is the number to be rounded down.

This function rounds towards zero. See ROUNDUP and ROUND for alternatives.

### Пример

Entering the value 567.567 and the value 2 in the count field will return 567.56.

Entering the value 567.567 and the value 2 in the count field will return 567.56.

Entering the value 567.567 and the value 2 in the count field will return 567.56.

Entering the value 567.567 and the value 2 in the count field will return 567.56.

## ROUNDUP

Rounds a number up, according to the specified decimal place.

### Syntax

ROUNDUP(number; count)

number is the number to be rounded up.

This function rounds away from zero. See ROUNDDOWN and ROUND for alternatives.

### Пример

Entering the value 123.343 and the value 2 in the count field will return the value 123.35.

Entering the value 567.567 and the value 2 in the count field will return 567.56.

Entering the value 123.343 and the value 2 in the count field will return the value 123.35.

If you enter the number -4.5, -1 will be returned as the result.

Entering the value 123.343 and the value 2 in the count field will return the value 123.35.

## SEC

Returns the secant of the given angle (in radians). The secant of an angle is equivalent to 1 divided by the cosine of that angle

### Syntax

SIN(number)

Number is the angle in radians.

To return the secant of an angle in degrees, use the RADIANS function.

### Examples

=SEC(PI()/4) returns approximately 1.4142135624, the inverse of the cosine of PI/4 radians.

The angle 3.14 (Pi) returns a cosine of -1.

## SECH

Returns the hyperbolic sine of a number.

### Syntax

SINH(number)

Number is the number whose hyperbolic sine is to be calculated.

### Пример

If you enter the value -5, -74.2 will be returned as the hyperbolic sine.

## SERIESSUM

Returns a sum of powers of the number x in accordance with the following formula:

SERIESSUM(x;n;m;coefficients) = coefficient_1*x^n + coefficient_2*x^(n+m) + coefficient_3*x^(n+2m) +...+ coefficient_i*x^(n+(i-1)m)

### Syntax

SERIESSUM(x; n; m; coefficients)

x: the number as an independent variable

n: the starting power

m: the increment

coefficients: a series of coefficients. For each coefficient the series sum is extended by one section.

## SIGN

Returns the sign of a number. The function returns the result 1 for a positive sign and -1 for a negative sign. If the number is zero, then the function likewise produces a zero.

### Syntax

SIGN(number)

Number is the number whose sign is to be determined.

### Пример

If you enter the number 3.4, 1 will be returned as the result.

If you enter the number -4.5, -1 will be returned as the result.

## SIN

Returns the sine of the given number (angle).

### Syntax

SIN(number)

Number is the angle in radians.

To return the sine of an angle in degrees, use the RADIANS function.

### Пример

The sine of the angle (in radians) 3.14 (Pi) is 0.

The angle 3.14 (Pi) returns a cosine of -1.

## SINH

Returns the hyperbolic sine of a number.

### Syntax

SINH(number)

Number is the number whose hyperbolic sine is to be calculated.

### Пример

If you enter the value -5, -74.2 will be returned as the hyperbolic sine.

## SQRT

Returns the positive square root of a number. The value of the number must be positive.

### Syntax

SQRT(number)

Number is the number whose square root is to be calculated.

Number must be positive.

### Пример

The square root of 16 is 4.

=SQRT(-16) returns an invalid argument error.

## SQRTPI

Returns the square root of a number*PI.

### Syntax

SQRTPI (Number)

Returns the positive square root of (PI multiplied by Number).

This is equivalent to SQRT(PI()*Number).

### Пример

=SQRTPI(2) returns the rounded value 2.506628.

## SUBTOTAL

Calculates subtotals. If a range already contains subtotals, these are not used for further calculations. Use this function with the AutoFilters to take only the filtered records into account.

### Syntax

SUBTOTAL(function; range)

Function is a number that stands for one of the following functions:

Function index (includes hidden values) | Function index (ignores hidden values) | Функција
1 | 101 | AVERAGE
2 | 102 | COUNT
3 | 103 | COUNTA
4 | 104 | MAX
5 | 105 | MIN
6 | 106 | PRODUCT
7 | 107 | STDEV
8 | 108 | STDEVP
9 | 109 | SUM
10 | 110 | VAR
11 | 111 | VARP

Use numbers 1-11 to include manually hidden rows or 101-111 to exclude them; filtered-out cells are always excluded.

Range is the range whose cells are included.

### Пример

You have a table in the cell range A1:B6 containing a bill of material for 10 students. Row 2 (Pen) is manually hidden. You want to see the sum of the figures that are displayed; that is, just the subtotal for the filtered rows. In this case the correct formula would be:

| A | B
1 | ITEM | QUANTITY
2 | Pen | 10
3 | Pencil | 10
4 | Notebook | 10
5 | Rubber | 10
6 | Sharpener | 10

=SUBTOTAL(9;B2:B6) returns 50.

=SUBTOTAL(109;B2:B6) returns 40.

## SUM

Adds all the numbers in a range of cells.

### Syntax

SUM(number1; number 2; ...; number 30)

Number 1 to number 30 are up to 30 arguments whose sum is to be calculated.

### Пример

If you enter the numbers 2; 3 and 4 in the Number 1; 2 and 3 text boxes, 9 will be returned as the result.

SUM(A1;A3;B5) calculates the sum of the three cells. SUM (A1:E10) calculates the sum of all cells in the A1 to E10 cell range.

Conditions linked by AND can be used with the function SUM() in the following manner:

Example assumption: You have entered invoices into a table. Column A contains the date value of the invoice, column B the amounts. You want to find a formula that you can use to return the total of all amounts only for a specific month, e.g. only the amount for the period >=1.1.99 to <1.2.99. The range with the date values covers A1:A40, the range containing the amounts to be totaled is B1:B40. C1 contains the start date, 1.1.99, of the invoices to be included and C2 the date, 1.2.99, that is no longer included.

Enter the following formula as an array formula:

=SUM((A1:A40>=C1)*(A1:A40<C2)*B1:B40)

In order to enter this as an array formula, you must press the Shift Command + Ctrl
+ Enter key instead of simply pressing the Enter key to close the formula. The formula will then be shown in the Formula bar enclosed in braces.

{=SUM((A1:A40>=C1)*(A1:A40<C2)*B1:B40)}

The formula is based on the fact that the result of a comparison is 1, if the criterion is met and 0 if it is not. The individual comparison results will be treated as an array and used in matrix multiplication, and at the end the individual values will be totaled to give the result matrix. The SUM() function can also be used in this way, for example, as COUNTIF() with several criteria.

## SUMIF

Adds the cells specified by a given criteria. This function is used to browse a range when you search for a certain value.

Пребарувањето поддржува регуларни изрази. На пример: можете да внесете „сите.*“, за да ги пронајдете првите појавувања на фразата „сите“ проследена со кој било друг знак. Доколку сакате да пребарувате текст кој исто така е регуларен израз, на секој знак мора да претходи знакот: \. Можете да ја вклучите или исклучите автоматската проценка на регуларни изрази во Алатки - Опции - LibreOffice Calc - Пресметување.

### Syntax

SUMIF(range; criteria; sum_range)

Range is the range to which the criteria are to be applied.

Criteria is the cell in which the search criterion is shown, or the search criterion itself. If the criteria is written into the formula, it has to be surrounded by double quotes.

Sum_range is the range from which values are summed. If this parameter has not been indicated, the values found in the Range are summed.

SUMIF supports the reference concatenation operator (~) only in the Criteria parameter, and only if the optional SumRange parameter is not given.

### Пример

To sum up only negative numbers: SUMIF(A1:A10;"<0")

=SUMIF(A1:A10;">0";B1:10) - sums values from the range B1:B10 only if the corresponding values in the range A1:A10 are >0.

See COUNTIF() for some more syntax examples that can be used with SUMIF().

## SUMSQ

If you want to calculate the sum of the squares of numbers (totaling up of the squares of the arguments), enter these into the text fields.

### Syntax

SUMSQ(number 1 to 30)

Number 1 to number 30 are up to 30 arguments the sum of whose squares is to be calculated.

### Пример

If you enter the numbers 2; 3 and 4 in the Number 1; 2 and 3 text boxes, 29 is returned as the result.

## TAN

Returns the tangent of the given angle.

### Syntax

TAN(number)

Number is the angle in radians.

To return the tangent of an angle in degrees, use the RADIANS function.

### Пример

The tangent of the angle (in radians) 3.14 (Pi) is 0.

The angle 90 returns a cotangent of -0.5.

## TANH

Returns the hyperbolic tangent of a number.

### Syntax

TANH(number)

Number is the number whose hyperbolic tangent is to be calculated.

### Пример

If you enter the value -5, the system returns the hyperbolic tangent -1.

## TRUNC

Truncates a number by removing decimal places of the number according to the precision specified in count.

### Syntax

TRUNC(number; count)

Number is the number whose decimal places are to be cut off.

Count is the number of places after the decimal delimiter that are not to be truncated.

The visible decimal places are specified in Tools - Options - LibreOffice Calc - Calculate.

### Пример

If you enter the number 34.5678 and the count 1, 34.5 will be returned as the result.

If you enter the number 34.5678 and the count 1, 34.5 will be returned as the result.

Поврзани теми

Functions by Category