ئۇلىغۇچ

Module
Contents
Index 🔎︎

# ھۆججەت

ئۇلىغۇچ

Open the Connectors toolbar, where you can add connectors to objects in the current slide. A connector is a line that joins objects, and remains attached when the objects are moved. If you copy an object with a connector, the connector is also copied.

There are four types of connector lines:

1. Standard (90-degree angle bends)

2. Line (two bends)

3. Straight

4. ئەگرى سىزىق

When you click a connector and move your mouse pointer over a filled object, or the edge of an unfilled object, gluepoints appear. A gluepoint is a fixed point where you can attach a connector line. You can add custom gluepoints to an object.

To draw a connector line, click a gluepoint on an object, drag to a gluepoint on another object, and then release. You can also drag to an empty part of you document and click. The unattached end of the connector is locked in place, until you drag the end to a different location. To detach a connector, drag either end of the connector line to a different location.

## ئۇلىغۇچ

Draws a connector with one or more 90-degree angle bends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

ئۇلىغۇچ

## يا ئوقى باشلىق ئۇلىغۇچ بېشى

Draws a connector with one or more 90-degree angle bends and an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يا ئوقى باشلىق ئۇلىغۇچ بېشى

## يا ئوقى باشلىق ئۇلىغۇچ ئاخىرى

Draws a connector with one or more 90-degree angle bends and an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يا ئوقى باشلىق ئۇلىغۇچ ئاخىرى

## قوش يا ئوقى باشلىق ئۇلىغۇچ

Draws a connector with one or more 90-degree angle bends and arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

قوش يا ئوقى باشلىق ئۇلىغۇچ

## يۇمىلاق ئۇلىغۇچ بېشى

Draws a connector with one or more 90-degree angle bends and a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق ئۇلىغۇچ بېشى

## يۇمىلاق ئۇلىغۇچ ئاخىرى

Draws a connector with one or more 90-degree angle bends and a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق ئۇلىغۇچ ئاخىرى

## يۇمىلاق باشلىق ئۇلىغۇچ

Draws a connector with one or more 90-degree angle bends and circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق باشلىق ئۇلىغۇچ

## سىزىقلىق ئۇلىغۇچ

Draws a connector that bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

سىزىقلىق ئۇلىغۇچ

## يا ئوقى باشلىق سىزىقلىق ئۇلىغۇچ بېشى

Draws a connector that starts with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

يا ئوقى باشلىق سىزىقلىق ئۇلىغۇچ بېشى

## يا ئوقى باشلىق سىزىقلىق ئۇلىغۇچ ئاخىرى

Draws a connector that ends with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

يا ئوقى باشلىق سىزىقلىق ئۇلىغۇچ ئاخىرى

## يا ئوقى باشلىق سىزىقلىق ئۇلىغۇچ

Draws a connector that bends near a gluepoint and has arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

يا ئوقى باشلىق سىزىقلىق ئۇلىغۇچ

## يۇمىلاق باشلىق سىزىقلىق ئۇلىغۇچ بېشى

Draws a connector that starts with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

يۇمىلاق باشلىق سىزىقلىق ئۇلىغۇچ بېشى

## يۇمىلاق باشلىق سىزىقلىق ئۇلىغۇچ ئاخىرى

Draws a connector that ends with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

يۇمىلاق باشلىق سىزىقلىق ئۇلىغۇچ ئاخىرى

## يۇمىلاق باشلىق سىزىقلىق ئۇلىغۇچ

Draws a connector that bends near a gluepoint and has circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

يۇمىلاق باشلىق سىزىقلىق ئۇلىغۇچ

## بىۋاسىتە ئۇلىغۇچ

Draws a straight line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

بىۋاسىتە ئۇلىغۇچ

## يا ئوقى باشلىق سىزىقلىق ئۇلىغۇچ بېشى

Draws a straight line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يا ئوقى باشلىق سىزىقلىق ئۇلىغۇچ بېشى

## يۇمىلاق باشلىق بىۋاسىتە ئۇلىغۇچ

Draws a straight line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق باشلىق بىۋاسىتە ئۇلىغۇچ

## يا ئوقى باشلىق بىۋاسىتە ئۇلىغۇچ

Draws a straight line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يا ئوقى باشلىق بىۋاسىتە ئۇلىغۇچ

## يۇمىلاق باشلىق بىۋاسىتە ئۇلىغۇچ

Draws a straight line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق باشلىق بىۋاسىتە ئۇلىغۇچ

## يۇمىلاق باشلىق بىۋاسىتە ئۇلىغۇچ

Draws a straight line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق باشلىق بىۋاسىتە ئۇلىغۇچ

## يۇمىلاق باشلىق بىۋاسىتە ئۇلىغۇچ

Draws a straight line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق باشلىق بىۋاسىتە ئۇلىغۇچ

## ئەگرى سىزىق ئۇلىغۇچ

Draws a curved line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

ئەگرى سىزىق ئۇلىغۇچ

## يا ئوقى باشلىق ئەگرى سىزىق ئۇلىغۇچ بېشى

Draws a curved line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يا ئوقى باشلىق ئەگرى سىزىق ئۇلىغۇچ بېشى

## يا ئوقى باشلىق ئەگرى سىزىق ئۇلىغۇچ ئاخىرى

Draws a curved line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يا ئوقى باشلىق ئەگرى سىزىق ئۇلىغۇچ ئاخىرى

## يا ئوقى باشلىق ئەگرى سىزىق ئۇلىغۇچ

Draws a curved line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يا ئوقى باشلىق ئەگرى سىزىق ئۇلىغۇچ

## يۇمىلاق باشلىق ئەگرى سىزىق ئۇلىغۇچ بېشى

Draws a curved line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق باشلىق ئەگرى سىزىق ئۇلىغۇچ بېشى

## يۇمىلاق باشلىق ئەگرى سىزىق ئۇلىغۇچ ئاخىرى

Draws a curved line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق باشلىق ئەگرى سىزىق ئۇلىغۇچ ئاخىرى

## يۇمىلاق باشلىق ئەگرى سىزىق ئۇلىغۇچ

Draws a curved line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

يۇمىلاق باشلىق ئەگرى سىزىق ئۇلىغۇچ

Related Topics

Creating a Flowchart