hcxdumptool
==============

Small tool to capture packets from wlan devices.
After capturing, upload the "uncleaned" cap here (https://wpa-sec.stanev.org/?submit)
to see if your ap or the client is vulnerable by using common wordlists.
Convert the cap to hccapx and/or to WPA-PMKID-PBKDF2 hashline (16800) with hcxpcaptool (hcxtools)
and check if wlan-key or plainmasterkey was transmitted unencrypted.


Brief description
--------------

Stand-alone binary - designed to run on Raspberry Pi's with installed Arch Linux.
It should work on other Linux systems (notebooks, desktops) and distributions, too.


Detailed description
--------------

| Tool           | Description                                                                                            |
| -------------- | ------------------------------------------------------------------------------------------------------ |
| hcxdumptool    | Tool to run several tests to determine if access points or clients are vulnerable                      |
| pioff          | Turns Raspberry Pi off via GPIO switch                                                                 |


Compile
--------------

Simply run:

```
make
make install (as super user)
```

or (with GPIO support - hardware mods required)

```
make GPIOSUPPORT=on
make GPIOSUPPORT=on install (as super user)
```

Compile for Android
--------------

You need:
* Android NDK installed in your system and in path variable

* This repository cloned with all submodules (`--recursive` flag in `git clone` or `git submodules update` command run)

Just run `ndk-build` - built executables for some architectures should be created inside `libs` directory.
Copy it to your phone and enjoy.


Requirements
--------------

* Operatingsystem: Arch Linux (strict), Kernel >= 4.14 (strict). It should work on other Linux systems (notebooks, desktops) and distributions, too (no support for other distributions). Don't use Kernel 4.4 (rt2x00 driver regression)

* libpthread and pthread-dev installed

* Raspberry Pi: additionally libwiringpi and wiringpi dev installed (Raspberry Pi GPIO support)

* Chipset must be able to run in monitor mode (strict by: ip and iw). Recommended: RALINK chipset (good receiver sensitivity), rt2x00 driver (fast)

* Raspberry Pi A, B, A+, B+ (Recommended: A+ = very low power consumption or B+), but notebooks and desktops could work, too.

* GPIO hardware mod recommended
 

Supported adapters (strict)
--------------


* USB ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter (ALLNET ALL-WA0150N / ALLNET ALL0235NANO) 

* USB ID 7392:7710 Edimax Technology Co., Ltd (Edimax EW-7711UAn v2)

* USB ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter (ALFA AWUS036NH, TENDA W311U+)

* USB ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter

* USB ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter (ALFA AWUS036H)

* USB ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter

* USB ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter

* USB ID 0cf3:9271 Qualcomm Atheros Communications AR9271 802.11n (TP-LINK TL-WN722N v1, v2 and v3 doesn't support monitor mode)

* USB ID 0b05:17d1 ASUSTek Computer, Inc. AC51 802.11a/b/g/n/ac Wireless Adapter [Mediatek MT7610U]
  kernel >= 4.19 (see changelog 20:01.2019 and issues https://github.com/ZerBea/hcxdumptool/issues/42)

* USB ID 148f:761a Ralink Technology, Corp. MT7610U ("Archer T2U" 2.4G+5G WLAN Adapter)
  kernel >= 4.19 (see changelog 20:01.2019 and issues https://github.com/ZerBea/hcxdumptool/issues/42)

* USB ID 7392:a812 Edimax Technology Co., Ltd (Edimax AC600 USB / Manufacturer: Realtek)
  get driver from here: https://github.com/aircrack-ng/rtl8812au

* PCIe 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8821AE 802.11ac PCIe Wireless Network Adapter

read how to identify a working adapter here: https://github.com/ZerBea/hcxdumptool/issues/42


Useful scripts
--------------

| Script       | Description                                              |
| ------------ | -------------------------------------------------------- |
| bash_profile | Autostart for Raspberry Pi (copy to /root/.bash_profile) |
| pireadcard   | Back up a Pi SD card                                     |
| piwritecard  | Restore a Pi SD card                                     |
| makemonnb    | Example script to activate monitor mode                  |
| killmonnb    | Example script to deactivate monitor mode                |


Hardware mod - see docs gpiowait.odg (hcxdumptool)
--------------

LED flashes 5 times if hcxdumptool successfully started

LED flashes every 5 seconds if everything is fine and signals are received

LED turns on, if no signal received during the last past 5 seconds

Press push button at least > 5 seconds until LED turns on (also LED turns on if hcxdumptool terminates)

Green ACT LED flashes 10 times

Raspberry Pi turned off and can be disconnected from power supply

Do not use hcxdumptool and hcxpioff together!


Hardware mod - see docs gpiowait.odg (hcxpioff)
--------------

LED flashes every 5 seconds 2 times if hcxpioff successfully started

Press push button at least > 5 seconds until LED turns on (hcxpioff will shut down Raspberry Pi safely)

Green ACT LED flashes 10 times

Raspberry Pi turned off and can be disconnected from power supply

Do not use hcxdumptool or hcxpioff together!


Warning
--------------

You must use hcxdumptool only on networks you have permission to do this, because:

* hcxdumptool is able to prevent complete wlan traffic
  (depends on selected options)

* hcxdumptool is able to capture PMKIDs from access points (only one single PMKID from an access point required)
  (use hcxpcaptool to save them to file)

* hcxdumptool is able to capture handshakes from not connected clients (only one single M2 from the client is required)
  (use hcxpcaptool to save them to file)

* hcxdumptool is able to capture handshakes from 5GHz clients on 2.4GHz (only one single M2 from the client is required)
  (use hcxpcaptool to save them to file)

* hcxdumptool is able to capture passwords from the wlan traffic
  (use hcxpcaptool -E to save them to file, together with networknames)

* hcxdumptool is able to capture plainmasterkeys from the wlan traffic
  (use hcxpcaptool -P to save them to file)

* hcxdumptool is able to request and capture extended EAPOL (RADIUS, GSM-SIM, WPS)
  (hcxpcaptool will show you information about them)

* hcxdumptool is able to capture identities from the wlan traffic
  (for example: request IMSI numbers from mobile phones - use hcxpcaptool -I to save them to file)

* hcxdumptool is able to capture usernames from the wlan traffic
  (for example: user name of a server authentication - use hcxpcaptool -U to save them to file)

* Do not use a logical interface and leave the physical interface in managed mode

* Do not use hcxdumptool in combination with aircrack-ng, reaver, bully or other tools which takes access to the interface

* Stop all services which takes access to the physical interface (NetworkManager, wpa_supplicant,...)

* Do not use tools like macchanger, as they are useless, because hcxdumptool uses its own random mac address space
