Module
Contents
Index 🔎︎

# Waliigala

This General tab enables you to define the general properties of a form control. These properties differ, depending on the control type. Not all of the following properties are available for every control.

Ajaja kana bira gahuuf...

Open context menu of a selected form element - choose Control - General tab.

Open Form Controls toolbar or Form Design toolbar, click Control icon - General tab.

If you export the current form document to HTML format, the default control values are exported, not the current control values. Default values are determined - depending on the type of control - by the properties' Default value (for example, in text fields), Default status (for check boxes and option fields), and Default selection (for list boxes).

## Akkaataa

Specifies whether Check boxes and Option buttons are displayed in a 3D look (default) or a flat look.

## Arfiilee ugguraa

If the user enters a password, you can determine the characters that will be displayed instead of the characters typed by the user. Under Password character, enter the ASCII code of the desired character. You can use the values from 0 to 255.

The characters and their ASCII codes can be seen in the Special Characters dialog (Insert - Special Character).

## Barruu durtii

Durtii barruu sanduuqa barruuf ykn makaaf qindeessi.

## Barruu gargaarsaa

Filannoo galuumsa barruu gargaarsaa akka qajeelcha too'annootti mul'atan jajjabeessa. Weyta hantuuten too'annoorra siiqsame qajeelchi barruu haalata dhimmamaa mul'isa.

For URL type buttons, the help text appears as the extended tip instead of the URL address entered under URL.

## Barruu gargaarsaa

Dirree too'annoo tokkoon tokkoo keessatti odeeffannoo dabalataa ykn barruu iftaa'aa dirree too'annoof ifteessitu dandeessisa. Amalli kun saganteessaa odeeffannoo dabalataa lakkada sagantaa keessatti fayyadamnu olkaa'uf gargaara. Dirreen kun kan fayyadu, fakkeenyaaf, jijjiiramaaf ykn ulagaalee madaalinsaa birootif.

## Bocquu

Dirreewwan too'annoo barruu ykn matadureewwan mul'ataa qabaniif, bocquu fayyadamuu barbaanne mul'isu fili. Qaaqa Bocquu banuuf, qabduu ... cuqaasi. Bocquun filatame maqaawwan dirreewwan too'annoo keessatti fi deetaa dirreewwan too'annoo gabatee keessaa mul'isuuf fayyada.

## Ceetuu

Specifies if a Push button behaves as a Toggle Button. If you set Toggle to "Yes", you can switch between the "selected" and "not selected" control states when you click the button or press the Spacebar while the control has the focus. A button in the "selected" state appears "pressed in".

## Cuqaasurratti xiyyeeffannaa fudhadhu

If you set this option to "Yes", the Push button receives the focus when you click the button.

## Dandeessise

If a control field has the property "Enabled" (Yes), the form user will be able to use the control field. If the property is disabled, it will not be enabled (No) and will be displayed in a gray color.

## Dhaabduucaancale

The "Tabstop" property determines if a control field can be selected with the Tab key. The following options are available:

Miti | When using the Tab key, focusing skips the control.
Eeyyee | The control can be selected with the Tab key.

## Dhangeessuu

Dhangii lakkada too'annoof ifteessa. Dhangii lakkadaa filuuf qabduu... cuqaasi.

## Dhangii Guyyaa

With date fields you can determine the format for the date readout.

Dirreewwan dhangii(guyyaa, yeroo, maallaqaa, lakkoofsaa)hundinuu akkuma naqa galchiturratti hundaa'udhaan isaan dhiiftun dhangii filame keessaa ofumaan dhangi'ama.

## Dhangii jabaa

You can have a format check with control fields that accept formatted contents (date, time, and so on). If the strict format function is activated (Yes), only the allowed characters are accepted. For example, in a date field, only numbers or date delimiters are accepted; all alphabet entries typed with your keyboard are ignored.

## Dhangii yeroo

Dhangii yeroo mul'isuuf barbaannu ibsuu dandeessa.

## Dheerina barruu olaanaa

Barruu fi Sanduuqota makaaf, Lakkoofsa arfiilee olaanaa dhimmamaan galchuu danda'u ibsa. Yoo amalli dirree too'annoo hin dhugoomne, qindoominni durtii zeeroo ta'a.

If the control is linked to a database and the text length is to be accepted from the field definition of the database, you must not enter the text length here. The settings are only accepted from the database if the control property was not defined ("Not Defined" state).

## Dirree sarxaa

Madda asxaa too'annowwaniitiif ifteessuf. Barruun diree asxaa bakka maqaa dirree kuusaa deetaa fayyaduu danda'a. Fakkeenyaaf, Naannesaa Gingilchaa, qaaqaBarbaadu keessaa, akkasumas maqaa sarjaa mul'ata gabatee keessaa.

To define one character of the label as a mnemonic, so that the user can access this control by pressing the character on the keyboard, insert a tilde (~) character in front of the character in the label.

Weyta qabduulee raadiyootti fayyadaman barruu goodayyaa garee qofatu akka dirree sarxatti fayyade. Barruun qabduuleen raadiyoo kun garee walfakkaatan hundaaf fayyada.

Yoo qabduu ... dirree barruutti aanu irra cuqaaste, qaaqa Filannoo Dirree Sarxaa ilaaluu dandeessa. Sarxaa tarreerraa fili.

Check the No assignment box to remove the link between a control and the assigned label field.

## Dubbisqofa

The "Read-only" property can be assigned to all controls in which the user can enter text. If you assign the read-only property to an image field which uses graphics from a database, the user will not be able to insert new graphics into the database.

## Durtii gatii mari

Gatii durtii kabala maraaf qindeessa.

## Durtii haalojii

Akka filannoon ykn sanduuqni makaan durtiidhaan filatame ifteessa.

Gosa qabduu haaromsituuf, Yoo qabduun haaromsuu dhimmamaan ka'aa taate haalojii too'annoo ibsuu dandeessa.

For grouped option fields, the status of the group corresponding to the default setting is defined by the "Default Status" property.

## Filannoo Durtii

Galfata sanduuqa tarree akka galfata durtiitti mallatteessuf.

For a Reset type button, the Default selection entry defines the status of the list box if the reset button is activated by the user.

For a List box that contains a value list, you can click the ... button to open the Default selection dialog.

Qaaqa Durtii filannoo keessatti, yeroo unkaa sanduuqa tarree qabu bannu galfata akka filatetti mallateessuu barbaadde fili.

## Filannoo dhoksi

Specifies whether a text selection on a control remains selected when a the focus is no longer on a control. If you set Hide selection to "No", the selected text remains selected when the focus is no longer on the control that contains the text.

## Filannoo hedduu

Maalima tokkoo ol sanduuqa tarree keessaa akka filattu ni heyyama.

## Filtering/Sorting

Specifies to show or hide the filtering and sorting items in a selected Navigation bar control. Filtering and sorting items are the following: Sort ascending, Sort descending, Sort, Automatic filter, Default filter, Apply filter, Reset filter/sort.

## Gad buusaa

A control field with the dropdown property has an additional arrow button which opens the list of the existing form entries per mouse click. Under Line count, you can specify how many lines (or rows) should be displayed in the dropdown state. Combination fields can have the dropdown property.

Sanduuqonni makaan akka sarjaawwanii gabatee too'annootti saagaman yeroo hunda akka durtitti gadbuufama.

## Galfatawan Tarree

Please note the tips referring to the keyboard controls.

Galfata tarree durtii durmurtaawaan gara sanduuqa Makaa durtii filannoo tti gala.

Note that the list entries entered here are only incorporated into the form if, on the Data tab under List Content Type, the option "Value List" is selected.

If you do not want the list entries to be written to the database or transmitted to the recipient of the Web form, but rather assigned values that are not visible in the form, you can assign the list entries to other values in a value list. The value list is determined on the Data tab. Under Type of List Contents, select the option "Value List". Then enter the values under List Contents that are to be assigned to the corresponding visible list entries of the form. For the correct assignment, the order in the value list is relevant.

Galmeewwan HTML'iif, galfatni tarree cancala Waliigalaa iyyaatoo HTML iin walgitanitti <OPTION>; galfatni gatii tarree cancala Deetaa irraa Qabeentota Tarree jalaa iyyaatoo <OPTION VALUE=...> walgitu galchuu.

## Gatii

Too'annoo dhokataakeessatti, Gatiijalatti, Deetaa too'annoo dhokataa irraa dhaalame galchuu dandeenya. Deetaan kun weyta unkaa eginu ni darba.

## Gatii Durtii

Gatii durtii dirree too'annoof qindeessaa. Fakkeenyaaf, yeroo unkaan baname gatiin durtii ni galfama.

For a Reset type button, the Default value entry defines the status of the control if the reset button is activated by the user.

## Gatii dabalamiinsa/hir'ifamiinsaa

Intarvaalota too'annoo qabduu qaanxii tokko kakaasuf hir'isuu ykn dabaluu tilmaama.

## Gatii gadaanaa

Dirreewwan lakkoofsaa fi maallaqaaf akka dhimmamaan gatii gadaanaa galchine ugguruuf gatii maayyii tilmaamuu dandeessa.

## Gatii gadaanaa mari.

Gatii gadaanaa too'annoo kabala maraa ifteessa.

## Gatii olaanaa

Dirreewwan maallaqaa fi lakkoofsaaf, gatii olaanaa dhimmamaan galchuu danda'u tilmaama danda'a.

## Gatii olaanaa mari.

Gatii olaanaa too'annoo kabala maraa ifteessa.

## Gocha

You can use navigation actions to design your own database navigation buttons.

The following table describes the actions that you can assign to a button:

Gocha | Ibsama
Homaa | Gochi tokkollee hin ml'atu
Unkaa dabarsi | Sends the data that is entered in other control fields of the current form to the address that is specified in Form Properties under URL. Yeroo gara faayilii PDF alerginu URL gara amala unkaa deetaa sanduuqa barruu "URL" galchaa.
Unkaa Haaromsi | Resets the settings in other control fields to the predefined defaults: Default Status, Default Selection, Default Value.
Galmee banaa /fuula saphaphuu | URL URLjalatti ibsame bana. Goodayyaa galtee ibsuuf Goodayyaa fayyadamuu dandeessa.
Kuusa jalqabaa | Unkaa ammee gara kuusaa jalqabatti siiqsi.
Kuusaa duraa | Unkaa ammee gara kuusaa duratti siiqsi.
Kuusaa ittaanu | Unkaa ammee gara kuusaa ittaanutti siiqsi.
Kuusaa xumuraa | Unkaa ammee gara kuusaa maayyii/Dhumaa siiqsi.
kuusaa kaa'i | Yoo barbaachisaa ta'e ,kuusaa ammee olkaa'i.
Galiinsa deetaa gaabbi | Jijjiirame kuusaa ammee keessaa faallessa.
Kuusaa haaraa | Unkaa ammee gara tarree saaguu siiqsi.
Kuusaa haqi | Kuusaa ammee haqi
Unkaa haaromsi | Unkaa ammee dhihoo kana kaawaman deebi'ii fe'i.

## Goodayyaa

You can also specify the target frame to display a URL that you open when you click a button that has been assigned to the "Open document or web page" action.

Yoo dirree cuqaaste, filannoo tarree goodayyaa kamitti galmeen ittaanu akka fe'amu murteessuu filachuu dandeessa. Danda'ammoonni kanaa gadii ni jiru:

Galfata | Hiikaa
_duwwaa | Galmeen ittaanu goodayyaa duwwaa haaraa keessatti uumame
_haadhoo | Galmeen ittaanu goodayyaa haadhoo keessatti uumame. Yoo haadhoon tokkoolleen hin argamne, galmee goodayyaa wal fakkatu keessatti uumame.
_ofi | Galmeen ittaanu goodayyaa haadhoo keessatti uumame.
-gubbaa | Galmeen ittaanu fooddaa sadarkaa gubbaa keessatti uumame, innis, sadarkaa goodayyaa olaanaa keessatti; yoo goodayyaa ammeen fooddaa gubbaa ta'e, galmeen goodayyaa ammee keessatti uumame.

The "Frame" property is relevant for HTML forms, but not for database forms.

## Gosa barruu

Allows you to use line breaks and formatting in a control field, such as a text box or label. To manually enter a line break, press the Enter key. Select "Multi-line with formatting" to enter formatted text.

Yoo gasa barruu "Sar-baay'ee dhangi'amaa" filte, too'annoo kana gara dirree kuusaa deetaa hidhuu hin dandeessu.

Too'annoon kun sarjaa barruu too'annoo gabatee keessaa "naqa sararabaay'ee" maqeessa.

## Guyyaa Gadaanaa

Guyyaa duraanii kan dhimmamaan galche tilmaama.

## Guyyaa durtii

Durtii guyyaa qindeessi.

## Guyyaa olaanaa

Guyyaa gatii biroo kan dhimmamaan jalqabame kan hin caalle ifteessa.

## Haalsadee

Specifies whether a check box can also represent ZERO values of a linked database apart from the TRUE and FALSE values. This function is only available if the database accepts three states: TRUE, FALSE and ZERO.

The "Tristate" property is only defined for database forms, not for HTML forms.

## Haguuggee gulaallii

lakkadda arfii dirreewwan sarxaa keessaa ibsuudhaan, wanta dhimmamaan dirree sarxaa keessatti galchu tilmaamuu dandeessa.

Dheerinni haguuggee gulaallii lakkoofsa qubannoowwan naqaa danda'amu tilmaama. Yoo dhimmamaan arfiilee haguuggee gulaallitiin wal hin ginne galche, naqni ni tufama weyta dhimmamaan dirree gad dhiisetti. Haguuggee gulaallii ibsuuf arfiilee asiin gadii kana galchuu dandeessa.

Arfii | Hiikaa
L | A text constant. This position cannot be edited. The character is displayed at the corresponding position of the Literal Mask.
a | The characters a-z and A-Z can be entered. Capital characters are not converted to lowercase characters.
A | The characters A-Z can be entered. If a lowercase letter is entered, it is automatically converted to a capital letter.
c | The characters a-z, A-Z, and 0-9 can be entered. Capital characters are not converted to lowercase characters.
C | The characters A-Z and 0-9 can be entered. If a lowercase letter is entered, it is automatically converted to a capital letter.
N | Only the characters 0-9 can be entered.
x | Arfiileen maxxanfamuu danda'an hundi galuu danda'u.
X | All printable characters can be entered. If a lowercase letter is entered, it is automatically converted to a capital letter.

Haguuggee "__.__.2000" sararaaf, fakkeenyaaf, haguuggee gulaali "NNLNNLLLLL" hiiki itti aansuun itti gargaaramaan yeroo guyyaa saagu lakqurxoota afur qofa saaga.that the user can only enter four digits when entering a date.

## Haguuggee laataraalii

With masked fields you can specify a literal mask. A literal mask contains the initial values of a form, and is always visible after downloading a form. Using a character code for the Edit mask, you can determine the entries that the user can type into the masked field.

Dheerinni haguuggee laataraalii yeroo hunda dheerina haguuggee gulaallitiin wal gitu qaba. Yoo kun dhimma hin taane, haguuggeen gulaallii takkaa ni murama ykn hanga dheerina haguuggee gulaallii duwwaan guutama.

## Halluu Duubbee

Halluu duubbeen dirreewwan too'annoo baay'eef argama. Yoo Halluu duubbee, Tarreen halluuwwan garagaraa keessaa filuuf dandeessisu bana. Filannoo "Baratamoo" sirna qindoomina fudhata. Yoo halluun barbaadame hin tarreeffamne, qabduu ... cuqaasi qaaqa Halluu ibsuuf.

## Halluu Handaaraa

Specifies the border color for controls that have the "Border" property set to "flat".

## Halluu mallattoo

Halluu mallattoolee too'annoowwaniif ibsa, fakkeenyaaf xiyya kabala maraa irraa.

## Hammamtaa Sajoo

Specifies whether the icons in a selected Navigation bar should be small or large.

## Hammamtaa mul'ataa

Specifies the size of scrollbar thumb in "value units". A value of ("Scroll value max." minus "Scroll value min." ) / 2 would result in a thumb which occupies half of the background area.

If set to 0, then the thumb's width will equal its height.

## Handaara

With control fields that have a frame, you can determine the border display on the form using the "Border" property. You can select among the "Without frame", "3-D look" or "Flat" options.

## Hantuutee golollee marfataa

Sets whether the value changes when the user scrolls a mouse wheel. Never: No change of the value. When focused: (default) The value changes when the control has the focus and the wheel is pointing at the control and gets scrolled. Always: The value changes when the wheel is pointing at the control and gets scrolled, no matter which control has the focus.

## Hiriirsuu/ Saxaatoowwan hiriirsuu

Filannoon hiriirsaa bitaahiriire, mirgahiriire, fi wiirteffame. Filannoowwan kun kan argamaniif maalimoota asiin gadiitif:

1. Title of Label fields,

2. Content of text fields,

3. Content of table fields in the columns of a table control,

4. Graphics or text that are used in buttons.

   Filannoon Hiriirsa qabduuleef Saxatoo Hiriirsaa jedhame waamama.

## Hojjaa dalgee

In table controls, enter a value for the row height. If you want, you can enter a value followed by valid measurement unit, for example, 2 cm.

## Iddo bu'ee dursaa

Weyta dirreewwan maallaqatti fayyadamnu mallattoon maallaqaa lakkoofsa dura ykn booda mul'atuu isaa tilmaama. The default setting is currency symbols are not prefixed.

## Iddoo qabsiisuu

Specifies to show or hide the positioning items in a selected Navigation bar control. Positioning items are the following: Record label, Record position, Record count label, Record count.

## Irra deebi'i

Yeroo too'annoo cuqaasnu fi qabduu hantuutee gad qabnu yoo gochi too'annoo kan akka qabduu sarxaa irra deddeebi'e ifteessa.

## Jijjiirama guddaa

Yeroo dhimmamaan gara islaayidii ittaanaa kabala maraa irraa cuqaasu gatii dabalaa ykn hir'inaa ifteessa.

## Jijjiirame xiqqaa

Specify the value to add or subtract when the user clicks the Arrow icon on the scrollbar.

## Kabal naannawiinsa

Specifies whether to display the Navigation bar on the lower border of table controls.

## Kabala Maraa

Gosa kabala maraa sanduuqa barruu ibteessu dabali.

## Korkoddii

Iddoo too'annoon korkoda'u hiiki.

## Kuusaa irratti gocheessuu

Specifies to show or hide the action items in a selected Navigation bar control. Action items are the following: Save record, Undo, New record, Delete record, Refresh.

## Kuusaa malkata

Kuusaa ammee xiyyaan marked ta'e keessatti akka tarjaan jalqabaa moggaasa tarree wajjiin mul'ate ifteessa.

## Mallattoo Maallaqaa

In a currency field, you can predefine the currency symbol by entering the character or string in the "Currency symbol" property.

## Maqaa

Each control field and each form has a "Name" property through which it can be identified. The name will appear in the Form Navigator and, using the name, the control field can be referred to from a macro. The default settings already specify a name which is constructed from using the field's label and number.

Yoo maakroo wajjiin hojjatta ta'e, maqoonni too'annoowwanii adda ta'uu isaa mirkaneessi.

The name is also used to group different controls that belong together functionally, such as radio buttons. To do so, give the same name to all members of the group: controls with identical names form a group. Grouped controls can be represented visually by using a Group Box.

## Maxxansamummaa

Specifies whether you want the control field to appear in a document's printout.

## Mul'ataa

Too'annoon akka haalata jiru keessatti mul'atu ibsi. Haalata saxaxa keessatti, too'annoon yeroo hundaa mul'ata.

Hubachiisa, yoo amali kun gara "Tole" (durtii)tti qindaa'e, kana jechuun too'annoon sirriimaan argii irratti uumama jechuu miti. Ittisamootni dabalataa yeroo mul'ita kan too'annoo sirriitti herregnu hojjoomu. Fakkeenyaaf, too'annoo kutaa dhokataa hanga kutaan xiqqaan ofiisaa mul'atuti kan Barreessaa keessaa hundi isaa tasumayyuu hin mul'atu.

Yoo amali "No"tti qindaa'e, too'annoon yeroo hunda haalata jiru keessaa dhokata.

Yemmuu galmeewwan warra akka itti fayyadamtu godhan dubbistuu, fooyya'aan OpenOffice.org inni moofaan hanga 3.1 amala kana ni tuffata.

## Mura jechaa

Displays text on more than one line. Allows you to use line breaks in a text box, so that you can enter more than one line of text. To manually enter a line break, press Enter.

## Naannawiinsa

Specifies to show or hide the navigation items in a selected Navigation bar control. Navigation items are the following: First record, Previous record, Next record, Last record.

## OfumaGuuti

The AutoFill function displays a list of previous entries after you start to type an entry.

## Olee

Olee too'annoo hiiki.

## QabannooY

Too'annoo qabannoo Y, korkoddii sadhaatawaan hiiki.

## Qabduu durtii

The "Default button" property specifies that the corresponding button will be operated when you press the Return key. If you open the dialog or form and do not carry out any further action, the button with this property is the default button.

Amalli kun qabduu qeenxee galmee keessaa qofatti ramadamuu qaba.

When using Web page forms, you might come across this property in search masks. These are edit masks that contain a text field and a Submit type button. The search term is entered in the text field and the search is started by activating the button. If the button is defined as the default button, however, simply hit Enter after entering the search term in order to start the search.

## Qabduu qanxii

Dirreewwan lakkoofsaa, dirreewwan maallaqaa, dirreewwan guyyaa fi yeroo qabduulee qaanxii unkaa keessatti jalqabamanitti.

## Qajeelfama

Qajeelfama surdala ykn sarjaa kabala maraa ykn qabduu qaanxii ifteessa.

## Qoodduu kumaatamaa

dirree lakkoofsaa fi maallaqaa wajjiin foo'aa kumaatama akka fayyadamne tilmaamu danda'a.

## QubannooX

Too'annoo qabannoo X, korkoddii sadhaatawaan hiiki.

## Sadarkaa

The "Label" property sets the label of the control field that is displayed in the form. This property determines the visible label or the column header of the data field in table control forms.

When you create a new control, the description predefined in the "Name" property is used as the default for labeling the control. The label consists of the control field name and an integer numbering the control (for example, CommandButton1). With the "Title" property, you can assign another description to the control so that the label reflects the function of the control. Change this entry in order to assign an expressive label to the control that is visible to the user.

To create a multi-line title, open the combo box using the Arrow button. You can enter a line break by pressing Shift+CommandCtrl
+Enter.

The "Title" property is only used for labeling a form element in the interface visible to the user. If you work with macros, note that at runtime, a control is always addressed through the "Name" property.

## Safara

Calaqqee hammamtaa too'annootti taasisuuf deebi'ii hammamteessi.

## Sararaa lakkoofsaa

For combo boxes with the "Dropdown" property, you can specify how many lines should be displayed in the dropdown list. With control fields which do not have the Dropdown option, the line's display will be specified by the size of the control field and the font size.

## Sararootni Barruu kan dhaabbatan

Dirreewwan barruutif, dhuma lakkada sararaa weyta barruu sarjaa kuusaa deetaatti barreessinu fayyadamnu fili.

## Saxatoowwan

An image button has a "Graphics" property. The "Graphics" property specifies the graphic's path and file name that you want to have displayed on the button. If you select the graphic file with the ... button, the path and file name will be automatically included in the text box.

## Sirrina kurnyee

Dirreewwan lakkoofsaa fi maallaqaan Lakkoofsa digitiiwwan mirga tuqaa kurnyeetti mul'atan tilmaama.

## Tarkaanfii Gatii

Gatii intarvaalota qabduulee qaanxii maallaqaa fi lakkoofsaa durqindeessuu dandeessa. Gatii xiyyoota gadee fi olee qabduu qaanxiitti fayyadamuun dabaluu ykn hir'isuu.

## Tartiiba cancalaa

The "Tab order" property determines the order in which the controls are focused in the form when you press the Tab key. In a form that contains more than one control, the focus moves to the next control when you press the Tab key. You can specify the order in which the focus changes with an index under "Tab order".

The "Tab order" property is not available to Hidden Controls. If you want, you can also set this property for image buttons and image controls, so that you can select these controls with the Tab key.

When creating a form, an index is automatically assigned to the control fields that are added to this form; every control field added is assigned an index increased by 1. If you change the index of a control, the indices of the other controls are updated automatically. Elements that cannot be focused ("Tabstop = No") are also assigned a value. However, these controls are skipped when using the Tab key.

You can also easily define the indices of the different controls in the Tab Order dialog.

## Turiinsa

Specifies the delay in milliseconds between repeating events. A repeating event occurs when you click an arrow button or the background of a scrollbar, or one of the record navigation buttons of a Navigation bar, and you keep the mouse button pressed for some time. You can enter a value followed by a valid time unit, for example, 2 s or 500 ms.

## URL

Enter the URL address for a Open document or web page button type in the URL box. The address opens when you click the button.

Yoo hantuutee qabduu haalata Dhimmamaa irra siiqsine, URL'n akka qaccee diriiratti argama, barruun Gargaarsa biraa hin galle jajjabeessa.

## URL Gargaarsa

Specifies a batch label in URL spelling which refers to a help document and which can be called with the help of the control field. The help for the control field help can be opened if the focus is positioned on the control field and the user presses F1.

## Yabbina

Sets the column width in the table control field in the units that are specified in the LibreOffice module options. If you want, you can enter a value followed by a valid measurement unit, for example, 2 cm.

## Yabbina

Bal'ina too'annoo hiiki.

## Yeroo durtii

Durtii yeroo qindeessi.

## Yeroo gadaanaa

Yeroo gadaanaa dhimmamaan galchuu danda'u tilmaama.

## Yeroo olaanaa

Guyyaa gatii biroo kan dhimmamaan jalqabame kan hin caalle ifteessa.