#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
#  MA 02110-1301, USA.

#  last change: 2017, Jan 4.

import pcbnew
import FootprintWizardBase

# Additional import for QRCode
# see https://github.com/kazuhikoarase/qrcode-generator/blob/master/python/qrcode.py
import kicad_qrcode as qrcode  # TODO: local qrcode package is prefered, so we renamed it

class QRCodeWizard(FootprintWizardBase.FootprintWizard):
    GetName = lambda self: '2D Barcode QRCode'
    GetDescription = lambda self: 'QR Code barcode generator'
    GetReferencePrefix = lambda self: 'QR***'
    GetValue = lambda self: self.module.Value().GetText()

    def GenerateParameterList(self):
        self.AddParam("Barcode", "Pixel Width", self.uMM, 0.5, min_value=0.4)
        self.AddParam("Barcode", "Border", self.uInteger, 0)
        self.AddParam("Barcode", "Contents", self.uString, 'Example')
        self.AddParam("Barcode", "Negative", self.uBool, False)
        self.AddParam("Barcode", "Use SilkS layer", self.uBool, False)
        self.AddParam("Barcode", "Use Cu layer", self.uBool, True)
        self.AddParam("Caption", "Enabled", self.uBool, True)
        self.AddParam("Caption", "Height", self.uMM, 1.0)
        self.AddParam("Caption", "Width", self.uMM, 1.0)
        self.AddParam("Caption", "Thickness", self.uMM, 0.15)


    def CheckParameters(self):
        self.Barcode = str(self.parameters['Barcode']['Contents'])
        self.X = self.parameters['Barcode']['Pixel Width']
        self.negative = self.parameters['Barcode']['Negative']
        self.UseSilkS = self.parameters['Barcode']['Use SilkS layer']
        self.UseCu = self.parameters['Barcode']['Use Cu layer']
        self.border = int(self.parameters['Barcode']['Border'])
        self.textHeight = int(self.parameters['Caption']['Height'])
        self.textThickness = int(self.parameters['Caption']['Thickness'])
        self.textWidth = int(self.parameters['Caption']['Width'])
        self.module.Value().SetText(str(self.Barcode))

        # Build Qrcode
        self.qr = qrcode.QRCode()
        self.qr.setTypeNumber(4)
        # ErrorCorrectLevel: L = 7%, M = 15% Q = 25% H = 30%
        self.qr.setErrorCorrectLevel(qrcode.ErrorCorrectLevel.M)
        self.qr.addData(str(self.Barcode))
        self.qr.make()

    def drawSquareArea( self, layer, size, xposition, yposition):
        # creates a EDGE_MODULE of polygon type. The polygon is a square
        polygon = pcbnew.EDGE_MODULE(self.module)
        polygon.SetShape(pcbnew.S_POLYGON)
        polygon.SetWidth( 0 )
        polygon.SetLayer(layer)
        halfsize = size/2
        polygon.GetPolyShape().NewOutline();
        polygon.GetPolyShape().Append( halfsize+xposition, halfsize+yposition )
        polygon.GetPolyShape().Append( halfsize+xposition, -halfsize+yposition )
        polygon.GetPolyShape().Append( -halfsize+xposition, -halfsize+yposition )
        polygon.GetPolyShape().Append( -halfsize+xposition, halfsize+yposition )
        return polygon


    def _drawPixel(self, xposition, yposition):
        # build a rectangular pad as a dot on copper layer,
        # and a polygon (a square) on silkscreen
        if self.UseCu:
            pad = pcbnew.D_PAD(self.module)
            pad.SetSize(pcbnew.wxSize(self.X, self.X))
            pad.SetPosition(pcbnew.wxPoint(xposition,yposition))
            pad.SetShape(pcbnew.PAD_SHAPE_RECT)
            pad.SetAttribute(pcbnew.PAD_ATTRIB_SMD)
            pad.SetName("")
            layerset = pcbnew.LSET()
            layerset.AddLayer(pcbnew.F_Cu)
            layerset.AddLayer(pcbnew.F_Mask)
            pad.SetLayerSet( layerset )
            self.module.Add(pad)
        if self.UseSilkS:
            polygon=self.drawSquareArea(pcbnew.F_SilkS, self.X, xposition, yposition)
            self.module.Add(polygon)


    def BuildThisFootprint(self):
        if self.border >= 0:
            # Adding border: Create a new array larger than the self.qr.modules
            sz = self.qr.modules.__len__() + (self.border * 2)
            arrayToDraw = [ [ 0 for a in range(sz) ] for b in range(sz) ]
            lineposition = self.border
            for i in self.qr.modules:
                columnposition = self.border
                for j in i:
                    arrayToDraw[lineposition][columnposition] = j
                    columnposition += 1
                lineposition += 1
        else:
            # No border: using array as is
            arrayToDraw = self.qr.modules

        # used many times...
        half_number_of_elements = arrayToDraw.__len__() / 2

        # Center position of QrCode
        yposition = - int(half_number_of_elements * self.X)
        for line in arrayToDraw:
            xposition = - int(half_number_of_elements * self.X)
            for pixel in line:
                # Trust table for drawing a pixel
                # Negative is a boolean;
                # each pixel is a boolean (need to draw of not)
                # Negative | Pixel | Result
                #        0 |     0 | 0
                #        0 |     1 | 1
                #        1 |     0 | 1
                #        1 |     1 | 0
                # => Draw as Xor
                if self.negative != pixel: # Xor...
                    self._drawPixel(xposition, yposition)
                xposition += self.X
            yposition += self.X
        #int((5 + half_number_of_elements) * self.X))
        textPosition = int((self.textHeight) + ((1 + half_number_of_elements) * self.X))
        self.module.Value().SetPosition(pcbnew.wxPoint(0, - textPosition))
        self.module.Value().SetTextHeight(self.textHeight)
        self.module.Value().SetTextWidth(self.textWidth)
        self.module.Value().SetThickness(self.textThickness)
        self.module.Reference().SetPosition(pcbnew.wxPoint(0, textPosition))
        self.module.Reference().SetTextHeight(self.textHeight)
        self.module.Reference().SetTextWidth(self.textWidth)
        self.module.Reference().SetThickness(self.textThickness)
        self.module.Value().SetLayer(pcbnew.F_SilkS)

QRCodeWizard().register()
