29.05.2019
==========
hcxdumptool moved to v 5.1.5


19.05.2019
==========
hcxdumptool: activated option --ignore warning
--ignore_warning                   : ignore warnings
                                     try this if you get some driver warnings
                                     do not report issues


16.04.2019
==========
updated wiki device and README.md.
This adapters are working fine, running kernel 4.19, 4.20 and 5.0:
EDIMAX EW-7711UAN  ID 7392:7710 Edimax Technology Co., Ltd
ALLNET ALL-WA0150N ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
TENDA W311U+       ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
LogiLink WL0151    ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
regardles of the xhci issue.


14.04.2019
==========
removed all device names from README.md, because VENDORS often change chipsets or driver errors occur:
v1 of a device is working fine, while v2 doesn't work
device A, running driver A is working fine, while device B running driver A doesn't work
driver doesn't support monitor mode
driver support monitor mode, but doesn't support packet injection
Examples here:
https://bugzilla.kernel.org/show_bug.cgi?id=202241
https://bugzilla.kernel.org/show_bug.cgi?id=202243
https://bugzilla.kernel.org/show_bug.cgi?id=202541

To find a working device, I recommend to read wikidevi:
https://wikidevi.com/


02.04.2019
==========
hcxdumptool now use this radiotap header:

static const uint8_t hdradiotap[] =
{
0x00, 0x00, // radiotap version + pad byte
0x0e, 0x00, // radiotap header length
0x06, 0x8c, 0x00, 0x00, // bitmap
0x00, // flags
0x02, // rate
0x14, // tx power
0x01, // antenna
0x08, 0x00 // tx flags
#define HDRRT_SIZE sizeof(hdradiotap)
};

read more about radiotap header here:
https://www.kernel.org/doc/Documentation/networking/mac80211-injection.txt


header is working with:
ID 148f:761a Ralink Technology, Corp. MT7610U ("Archer T2U" 2.4G+5G WLAN Adapter

removed "USB ID 7392:a812 Edimax Technology Co., Ltd" from "known as working device list"
because this driver is not working with the radiotap header.


30.03.2019
==========
hcxdumptool: added new option --silent
--silent : do not transmit!
           hcxdumptool is acting like a passive dumper

added RTL8187. Removed the wron devices from the list (only RT3070 ia affected)
* USB ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter (ALFA AWUS036H)
* USB ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter


29.03.2019
==========
added cflag DEBUG
if compiled with DEBUG, hcxdumptool show raw packets and raw GSP data, directly received from the device

removed ALFA AWUS036NH from the "known as workinging list", because the device doesn't work
any longer, running kernel 5.0.


28.03.2019
==========
removed devices from "known working" list:
* USB ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter (ALFA AWUS036H)
* USB ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
because they are not working running kernel 5.0


27.03.2019
==========
removed wiringPi dependency
now we are running "bare metal" - complete GPIO stuff moved to hcxdumptool and hcxpioff
do not use wiringPi in combination with hcxdumptool and/or hcxpioff
Makefile: removed DOGPIOSUPPORT
hcxdumptool: changed options wiringPi options to GPIO options
--gpio_button=<digit>              : Raspberry Pi GPIO pin number of button (2...27)
                                     default = GPIO not in use
--gpio_statusled=<digit>           : Raspberry Pi GPIO number of status LED (2...27)
                                     default = GPIO not in use

hcxpioff: changed options wiringPi options to GPIO options
--gpio_button=<digit>              : Raspberry Pi GPIO pin number of button (2...27)
                                     default = GPIO not in use
--gpio_statusled=<digit>           : Raspberry Pi GPIO number of status LED (2...27)
                                     default = GPIO not in use

The GPIO is disabled on default. If you like to activate GPIO support you must do
the hardware modifactions as described here: doc/gpiowait.odg
and set the options according to your modification.
You can choose every GPIO pin, as long as you use a pull down resistor to ground. 
Raspberry model should be detected by automatic and according to the revision we use:
GPIO mem 0x20000000 for A, B, A+, B+, and Zero, Zero W(H)
GPIO mem 0x3F000000 for 2B, 3B, 3A+, 3B+
compute modules (CMx) are not supported.


20.03.2019
==========
hcxdumptool: GPIO pins are no longer hard coded!
--wpi_button=<digit>    : wiringPi number of of button (0...31, Raspberry Pi A and B: 0 .. 16)
                          default = 7
--wpi_statusled=<digit> : wiringPi number of status LED (0...31, Raspberry Pi A and B: 0 .. 16)
                          default = 0


19.03.2019
==========
hcxpioff: refactored - GPIO pins are no longer hard coded!
--wpi_button=<digit>    : wiringPi number of of button (0...31, Raspberry Pi A and B: 0 .. 16)
                          default = 7
--wpi_statusled=<digit> : wiringPi number of status LED (0...31, Raspberry Pi A and B: 0 .. 16)
                          default = 0
--help                  : show this help
--version               : show version


16.03.2019
==========
added man page hcxdumptool.1
removed device from list: 
USB ID 7392:a812 Edimax Technology Co., Ltd (Edimax AC600 USB / Manufacturer: Realtek)
because the driver from here: https://github.com/aircrack-ng/rtl8812au
is no longer working on kernel 5.0


09.03.2019
==========
hcxdumptool moved to v 5.1.4

hcxdumptool: added new option:
--ignore_warning                   : hcxdumptool will not terminate if other services take access on the device
                                   : warning: expect problems if hcxdumptool tries to change channels

From now on, hcxdumptool will not terminate during the initalization
if another service take access on the interface.
Expect problems and do not report issues related to this option!!!!

From now on, hcxdumptool will also show channel and frequency (when running option -C)
  1 / 2412MHz (20 dBm)
  2 / 2417MHz (20 dBm)
  3 / 2422MHz (20 dBm)
  4 / 2427MHz (20 dBm)
  5 / 2432MHz (20 dBm)
  6 / 2437MHz (20 dBm)
  7 / 2442MHz (20 dBm)
  8 / 2447MHz (20 dBm)
  9 / 2452MHz (20 dBm)
 10 / 2457MHz (20 dBm)
 11 / 2462MHz (20 dBm)
 12 / 2467MHz (20 dBm)
 13 / 2472MHz (20 dBm)


09.03.2019
==========
hcxdumptool: added improved warning message
Now hcxdumptool print the error message received from the driver inside the brackets
$ hcxdumptool -i wlp3s0f0u1 -c 14
initialization...
warning: unable to set channel 14 (Invalid argument) - removed this channel from scan list

In this case the user tried to set channel 14. The driver doesn't support this
and responds with Invalid argument 


07.03.2019
==========
hcxdumptool: added debug code in main packet loop [processpackets()]
to print raw GPS data, received from GPSD:
/*
			printf("\ndebug: %s\n", gpsddata);
*/
uncomment this before you run make to retrieve this values.


06.03.2019
==========
hcxdumptool: added GPS date and GPS time to status and pcapng comment field.

$ sudo hcxdumptool -i wlp3s0f0u1 --use_gpsd -o test.pcapng
initialization...
connecting to GPSD...
waiting up to 5 seconds to retrieve first position
GPSD activated

start capturing (stop with ctrl+c)
GPS LATITUDE.............: 49.126403
GPS LONGITUDE............: 4.626175
GPS ALTITUDE.............: 129.500000
GPS DATE.................: 06.03.2019
GPS TIME.................: 21:52:41
INTERFACE................: wlp3s0f0u1
ERRORMAX.................: 100 errors
FILTERLIST...............: 0 entries
MAC CLIENT...............: f04f7c89dabb
MAC ACCESS POINT.........: 980ee432604d (incremented on every new client)
EAPOL TIMEOUT............: 150000
REPLAYCOUNT..............: 61455
ANONCE...................: 182972399cd2e65deb7941601cca14b644681c092dcf6f704935c7f3d2eaceea

INFO: cha=11, rx=7080, rx(dropped)=1676, tx=408, powned=10, err=0, lat=49.126342, lon=4.626268, alt=129.500000, gpsdate=06.03.2019, gpstime=22:01:55^C
terminated...

$ tshark -r test.pcapng-0 -Y frame.comment -T fields -E header=y -e frame.number -e frame.time -e wlan.sa -e frame.comment
172	Mar  6, 2019 23:01:48.793212000 CET	1a:f8:7c:91:24:a3	lat:49.126337,lon:4.626268,alt:129.500000,date:06.03.2019,time:22:01:48


05.03.2019
==========
hcxdumptool: removed general info about tx-power - now we use iw style to show tx-power/channel
hcxdumptool -i <interface> -C
initialization...
available channels:
1 (20 dBm)
2 (20 dBm)
3 (20 dBm)
...
132 (26 dBm)
136 (26 dBm)
140 (26 dBm)
149 (13 dBm)
153 (13 dBm)
157 (13 dBm)
161 (13 dBm)
165 (13 dBm)


26.02.2019
==========
hcxdumptool moved to version 5.1.3 due several bug fixes and improved rcascan status output


18.02.2019
==========
release hcxdumptool v 5.1.2 due to serveral bugfixes


02.02.2019
==========
release hcxdumptool v 5.1.1


20.01.2019
==========
hcxdumptool:
added new MT76 device: "TP-LINK Archer Archer T2U"
working with kernel: 4.19, 4.20 (some issues), 5.0
read more here:
https://github.com/ZerBea/hcxdumptool/issues/42
https://bugzilla.kernel.org/show_bug.cgi?id=202241
https://bugzilla.kernel.org/show_bug.cgi?id=202243


11.01.2019
==========
hcxdudmptool:
From now on, we assume that a packet is outgoing, if
dBm Antenne Signal is absent.


08.01.2019
==========
hcxdudmptool and mac80211_hwsim
mac80211_hwsim is a Linux kernel module that can be used to simulate
arbitrary number of IEEE 802.11 radios for mac80211. It can be used to
test hcxdumptool:
load module:
$ sudo modprobe mac80211_hwsim

run hcxdumptool to retrieve informations about the interface:
$ hcxdumptool -I
wlan interfaces:
020000000000 wlan0 (mac80211_hwsim)
020000000100 wlan1 (mac80211_hwsim)

bring monitor interface up:
$ sudo sudo ip link set hwsim0 up

run hcxdumptool:
$ sudo hcxdumptool -i wlan0
initialization...

start capturing (stop with ctrl+c)
INTERFACE:...............: wlan0
ERRORMAX.................: 100 errors
FILTERLIST...............: 0 entries
MAC CLIENT...............: c8aacc9c01ec
MAC ACCESS POINT.........: 580943000000 (incremented on every new client)
EAPOL TIMEOUT............: 150000
REPLAYCOUNT..............: 62263
ANONCE...................: 513282ebb604e6e10c450d6c3eaa6428d118b54abeef4672be3ef700052305d5

INFO: cha=11, rx=0, rx(dropped)=0, tx=120, powned=0, err=0

run wireshark on wlan0 or hwsim0 to monitor hcxdumptool output.
do not forget to remove mac80211_hwsim if the module is not longer needed!

read more here:
https://www.kernel.org/doc/readme/Documentation-networking-mac80211_hwsim-README


04.01.2019
==========
hcxdumptool - changed flash time:
LED flashes every 5 seconds = everything is fine
LED stays on = no signal received during the last past five seconds
hcxdumptool - ignore double outgoing packets (rth->it_present == 0)


03.01.2019
==========
hcxdumptool: changed flash time (5 times longer on ERROR)
hcxpioff: changed flash time


20.12.2018
==========
improved detection of broken driver
from now on GPIO LED blinks twice every 5 seconds
- if a possbile driver issue is detected
- if no packets received during the last past 5 seconds

another indicator is that the incomming packetcounter (rx=xxxx)
doesn't increase

or dmesg show this error:
[65786.808078] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush
[65824.174119] ieee80211 phy2: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush
[67801.029527] ------------[ cut here ]------------

it seems to be a kernel issue that hcxdumptool isn't able to handle, automatically:
https://bbs.archlinux.org/viewtopic.php?id=237028
https://bugs.openwrt.org/index.php?do=details&task_id=929&opened=169&status%5B0%5D=
https://community.spiceworks.com/topic/2132263-ubuntu-16-04-wifi-disconnects-randomly
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1750226
https://www.raspberrypi.org/forums/viewtopic.php?t=206815

workaround:
1) get driver information
$ hcxdumptool -I
wlan interfaces:
7cdd90xxxxxx wlp3s0f0u2 (rt2800usb)

2) remove module
$ modprobe -r rt2800usb

3) load module
$ modprobe rt2800usb


18.12.2018
==========
added new option to set station MAC address
--station_mac=<mac_addr>           : use this MAC address for station
                                     format = 112233445566
                                     format = 112233000000  (to set only OUI)
                                     format = 445566 (to set only NIC)

added new option to set access point MAC address
--ap_mac=<mac_addr>                : use this MAC address for access point as start MAC
                                     format = 112233445566
                                     format = 112233000000  (to set only OUI)
                                     format = 445566 (to set only NIC)
                                     warning: do not use a MAC of an existing access point in your range

improved detection of broken driver
set default ERRORMAX to 100
added option to set ERRORMAX
-T <digit>     : set maximum ERRROR count (hcxdumptool terminates when the value is reached)
                 default: 100 errors

Remarks:
errorcount will increase by one, if send packet (tx=xxx) > 3*incomming packets (rx=xxx)


15.12.2018
==========
improved random generator (now seeded with and adapter mac address) 
Raspberry Pi: improved handling of GPIO switch


07.12.2018
==========
restore interface settings after -C
improved help menu
-more informations about monitor mode
-more informations about packet injection
monitor mode and packet injection must be supported by the driver,
otherwise hcxdumptool will not work.


05.12.2018
==========
moved to v 5.1.0 (according to hashcat)


04.12.2018
==========
added new option:
-C             : show available channels and quit


27.11.2018
==========
added new option:
--poweroff                         : once hcxdumptool finished, power off system


26.11.2018
==========
several big endian fixes
switched to version 5.0.1


07.10.2018
==========
added new option filter mode 3:
--filterlist=<file>                : mac filter list
                                     format: 112233445566 + comment
                                     maximum line lenght 255, maximum entries 64
--filtermode=<digit>               : mode for filter list
                                     1: use filter list as protection list (default) in transmission branch
                                        receive everything, interact with all APs and CLIENTs in range,
                                        except(!) the ones from the filter list
                                     2: use filter list as target list in transmission branch
                                        receive everything, only interact with APs and CLIENTs in range,
                                        from the filter list
                                     3: use filter list as target list in receiving branch
                                        only receive APs and CLIENTs in range,
                                        from the filter list


30.10.2018
==========
moved to version 5.0.0


05.10.2018
==========
added more error messages
fixed small bug in error count on channel change failure


04.10.2018
==========
show GPS position (if activated) in status line (refresh every 5 seconds)
fixed broken status display on rcascan
increased speed of rcascan
fixed error handling if selected channels not supported by driver
if option -t is not set, skip empty channels after one second 
improved scan list
fixed some static var


01.10.2018
==========
changed order of channels in default scan list:
1, 9, 6, 3, 11, 7, 1, 10, 6, 8, 11, 4, 1, 12, 6, 2, 11, 5, 13


27.09.2018
==========
added GPSD support (stored as comment in pcapng file)
--use_gpsd                         : use GPSD to retrieve position
                                     add latitude, longitude and altitude to every pcapng frame
device must be supported by GPSD:
http://www.catb.org/gpsd/hardware.html
(tested using: AktivePilot JENTRO BT-GPS-8)

Retrieve GPS information with:
$ tshark -r filename.pcapng -Y frame.comment -T fields -E header=y -e frame.number -e frame.time -e wlan.sa -e frame.comment


write mac_ap to pcapng SHB
write mac_sta to pcapng SHB
SHB optioncodes:
#define OPTIONCODE_MACMYAP	62107
#define OPTIONCODE_RC		62108
#define OPTIONCODE_ANONCE	62109
#define OPTIONCODE_MACMYSTA	62110


16.09.2018
==========
show warning if NetworkManager and/or wpa_supplicant is running


15.09.2018
==========
added Cisco Systems, Inc VENDOR information
--station_vendor=<digit>           : use this VENDOR information for station
                                     0: transmit no VENDOR information (default)
                                     1: Broadcom
                                     2: Apple-Broadcom
                                     3: Sonos
                                     4: Netgear-Broadcom
                                     5: Wilibox Deliberant Group LLC
                                     6: Cisco Systems, Inc


11.09.2018
==========
You can “uncomment a line” in a configuration file
by removing the # at the start of the line.
Or, to “comment out” a line, add a # character
to the start of the line. 

001122334455 myap
# aabbccddeeff ignore this mac
112233445566 second ap
# this is may comment


05.09.2018
==========
added Netgear Broadcom VENDOR information
added Wilibox Deliberant Group LLC VENDOR information


04.09.2018
==========
improved rcascan (show time and access points which hide their ESSID)
prepare detection of PMF
refactored access point handling
handle 4096 access points simultaneously
refactored client handling
handle 4096 clients simultaneously
speed up retrieving PMKIDs (< 1 minute)
attack access points which hide their ESSID
increased filter list line length
increased filter list maximum entries
added option to show beacons in status output:
--enable_status=<digit>            : enable status messages
                                     bitmask:
                                      1: EAPOL
                                      2: PROBEREQUEST/PROBERESPONSE
                                      4: AUTHENTICATON
                                      8: ASSOCIATION
                                     16: BEACON

added option to choose station VENDOR information:
--station_chipset=<digit>          : use this VENDOR information for station
                                     0: transmit no VENDOR information (default)
                                     1: Broadcom
                                     2: Apple-Broadcom
                                     3: Sonos


30.08.2018
==========
iw/ip functionality added!
now hcxdumptool will set monitor mode and bring up interface!
previous interface settings will be restored, when hcxdumptool terminated


19.08.2018
==========
parse SAE authentication


19.08.2018
==========
added radio assignment scan
--do_rcascan                       : show radio channel assignment (scan for target access points)
--save_rcascan=<file>              : output rca scan list to file when hcxdumptool terminated
--save_rcascan_raw=<file>          : output file in pcapngformat
                                     unfiltered packets
                                     including radiotap header (LINKTYPE_IEEE802_11_RADIOTAP)


17.08.2018
==========
detect NETWORK EAP authentication system
transmit BROADCAST beacon


16.08.2018
==========
From now on we store open system authentications to pcapng
only if they have have a vendor specific field.
we are no longer interested in standard open system authentications (payload len = 6)


changed some default values:

-D <digit>     : deauthentication interval
                 default: 10 (every 10 beacons)
                 the target beacon interval is used as trigger
-A <digit>     : ap attack interval
                 default: 10 (every 10 beacons)
--give_up_deauthentications=<digit>: disable transmitting deauthentications after n tries
                                     default: 100 tries (minimum: 4)
                                     affected: connections between client an access point
                                     deauthentication attacks will not work against protected management frames
--give_up_ap_attacks=<digit>       : disable transmitting directed proberequests after n tries
                                     default: 100 tries (minimum: 4)
                                     affected: client-less attack
                                     deauthentication attacks will not work against protected management frames



13.08.2018
==========
increased some attack values:
--give_up_deauthentications=<digit>: disable transmitting deauthentications after n tries
                                     default: 100 tries (minimum: 4)
                                     affected: connections between client an access point
                                     deauthentication attacks will not work against protected management frames
--give_up_ap_attacks=<digit>       : disable transmitting directed proberequests after n tries
                                     default: 100 tries (minimum: 4)


07.08.2018
==========
moved to 4.2.1
added communication between hcxdumptool and hcxpcaptool via pcapng option fields:
62108 for REPLAYCOUNT uint64_t
62109 for ANONCE uint8_t[32]

enabled hardware handshake instead of software handshake
changed beavior auf status:
--enable_status=<digit>            : enables status messages
                                     bitmask:
                                     1: EAPOL
                                     2: PROBEREQUEST/PROBERESPONSE
                                     4: AUTHENTICATON
                                     8: ASSOCIATION
Now we use a bitmask to deliver status messages.


06.08.2018
==========
write ISB (Interface Statistic Block) at the end of a cpature


04.08.2018
==========
addet new option (--disable-active_scan) to hcxdumptool
--disable_active_scan: do not transmit proberequests to BROADCAST using a BROADCAST ESSID


04.08.2018
==========
release hcxdumptool 4.2.0
complete refactored:
-various new options
-measurement of EAPOL timeout
-full support for hashcat hashmodes -m 16800 and 16801
-now default format is pcapng


$ ./hcxdumptool-bleeding --help
hcxdumptool 4.2.0 (C) 2018 ZeroBeat
usage  : hcxdumptool <options>
example: hcxdumptool -o output.pcapng -i wlp39s0f3u4u5 -t 5 --enable_status

options:
-i <interface> : interface (monitor mode must be enabled)
                 ip link set <interface> down
                 iw dev <interface> set type monitor
                 ip link set <interface> up
-o <dump file> : output file in pcapngformat
                 management frames and EAP/EAPOL frames
                 including radiotap header (LINKTYPE_IEEE802_11_RADIOTAP)
-O <dump file> : output file in pcapngformat
                 unencrypted IPv4 and IPv6 frames
                 including radiotap header (LINKTYPE_IEEE802_11_RADIOTAP)
-W <dump file> : output file in pcapngformat
                 encrypted WEP frames
                 including radiotap header (LINKTYPE_IEEE802_11_RADIOTAP)
-c <digit>     : set scanlist  (1,2,3,...)
                 default scanlist: 1, 3, 5, 7, 9, 11, 13, 2, 4, 6, 8, 10, 12
                 maximum entries: 127
                 allowed channels:
                 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
                 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 58, 60, 62, 64
                 100, 104, 108, 112, 116, 120, 124, 128, 132,
                 136, 140, 144, 147, 149, 151, 153, 155, 157
                 161, 165, 167, 169, 184, 188, 192, 196, 200, 204, 208, 212, 216
-t <seconds>   : stay time on channel before hopping to the next channel
                 default: 5 seconds
-E <digit>     : EAPOL timeout
                 default: 100000 = 1 second
                 value depends on channel assignment
-D <digit>     : deauthentication interval
                 default: 20 (every 20 beacons)
                 the target beacon interval is used as trigger
-A <digit>     : ap attack interval
                 default: 20 (every 20 beacons)
                 the target beacon interval is used as trigger
-I             : show suitable wlan interfaces and quit
-h             : show this help
-v             : show version

--filterlist=<file>                : mac filter list
                                     format: 112233445566 + comment
                                     maximum line lenght 128, maximum entries 32
--filtermode=<digit>               : mode for filter list
                                     1: use filter list as protection list (default)
                                     2: use filter list as target list
--disable_deauthentications:         disable transmitting deauthentications
                                     affected: connections between client an access point
                                     deauthentication attacks will not work against protected management frames
--give_up_deauthentications=<digit>: disable transmitting deauthentications after n tries
                                     default: 10 tries (minimum: 4)
                                     affected: connections between client an access point
                                     deauthentication attacks will not work against protected management frames
--disable_disassociations          : disable transmitting disassociations
                                     affected: retry (EAPOL 4/4 - M4) attack
--disable_ap_attacks               : disable attacks on single access points
                                     affected: client-less (PMKID) attack
--give_up_ap_attacks=<digit>       : disable transmitting directed proberequests after n tries
                                     default: 10 tries (minimum: 4)
                                     affected: client-less attack
                                     deauthentication attacks will not work against protected management frames
--disable_client_attacks           : disable attacks on single clients points
                                     affected: ap-less (EAPOL 2/4 - M2) attack
--enable_status                    : enable status messages
--help                             : show this help
--version                          : show version



01.08.2018
==========
moved some stuff from hcxtools to hcxdumptool repository
prepare complete refactoring!


04.03.2018
==========
hcxdumptool: added new option -W
-W <dump file> : WEP encrypted packets output file in pcapformat including radiotap header (LINKTYPE_IEEE802_11_RADIOTAP)


04.03.2018
==========
hcxdumptool again complete refactored:


02.03.2018
==========
hcxdumptool is complete refactored:
- improved scan engine
- improved authentication engine (incl. Radio Measurement, and NULL frame detection)
- dropped timer
- use threads for LED and channel switch
- use only one file descriptor for raw socket operations
- working on Intel Corporation Centrino Ultimate-N 6300 (rev 3e) WiFi adapter (kernel >= 4.15)
- working on Alfa AWUS036NH, Alfa AWUS036NHA
- working on Alfa AWUS036ACH (driver: https://github.com/kimocoder/rtl8812au)
- more channels allowed (depends on installed wireless regulatory domain)
- simple usage: hcxdumptool -i <interface> -o dumpfile.pcap -t 5
  interface (real interface - no monX) must be in monitor - all services/programs with access to the interface must be stopped! 
- new format of blacklist
- and more...

reported to run on Gentoo
https://github.com/ZerBea/hcxdumptool_bleeding_testing/issues/2#issuecomment-369256915

reported to run on OpenWRT/LEDE
https://github.com/ZerBea/hcxdumptool_bleeding_testing/issues/3#issuecomment-369756725

reported to run with Intel Corporation Centrino Ultimate-N 6300 (rev 3e)
https://github.com/ZerBea/hcxdumptool_bleeding_testing/issues/2#issuecomment-369259800

$ hcxdumptool -h
hcxdumptool 4.1.0 (C) 2018 ZeroBeat
usage:
hcxdumptool <options>

options:
-i <interface> : interface (monitor mode must be eanabled)
                 ip link set <interface> down
                 iw dev <interface> set type monitor
                 ip link set <interface> up
-o <dump file> : output file in pcapformat including radiotap header (LINKTYPE_IEEE802_11_RADIOTAP)
-O <dump file> : ip based traffic output file in pcapformat including radiotap header (LINKTYPE_IEEE802_11_RADIOTAP)
-c <digit>     : set scanlist  (1,2,3,... / default = default scanlist)
                 default scanlist: 1, 3, 5, 7, 9, 11, 13, 2, 4, 6, 8, 10, 12
                 allowed channels:
                 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
                 36, 40, 44, 48, 52, 56, 60, 64
                 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 147, 151, 155, 167
-t <seconds>   : stay time on channel before hopping to the next channel
                 default = 5 seconds
-T <maxerrors> : terminate after <x> maximal errors
               : default: 1000000
-D             : do not transmit deauthentications or disassociations
-R             : do not transmit requests
-A             : do not respond to requests from clients
-B <file>      : blacklist (do not deauthenticate clients from this hosts)
                 format = mac_ap:mac_sta:ESSID
                 112233445566:aabbccddeeff:networkname (max. 32 chars)
-P             : enable poweroff
-s             : enable status messages
-I             : show suitable wlan interfaces and quit
-h             : show this help
-v             : show version


27.02.2018
==========
Now recommendations since we are run into heavy problems with latest drivers and operating systems
* Operatingsystem: archlinux (strict), Kernel >= 4.14 (strict)
* Raspberry Pi A, B, A+, B+ (Recommended: A+ = very low power consumption or B+), but notebooks and desktops could work, too.
* GPIO hardware mod recommended

Supported adapters (strict)
* USB ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
* USB ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
* USB ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
* USB ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
* USB ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
 

25.02.2018
==========
- initial start of this repository
- added hcxdumptool
- added hcxpioff

