st-flash(1)

NAME

st-flash - Flash binary files to STM32 device

SYNOPSIS

st-flash [OPTIONS] {read|write|erase} [FILE] <ADDR> <SIZE>

DESCRIPTION

Flash binary files to arbitrary sections of memory, or read arbitrary addresses of memory out to a binary file.

You can use this instead of st-util(1) if you prefer, but remember to use the .bin image, rather than the .elf file.

Use hexadecimal format for the ADDR and SIZE.

COMMANDS

write FILE ADDR
    Write firmware FILE to device starting from ADDR

read FILE ADDR SIZE
    Read firmware from device starting from ADDR up to SIZE bytes to FILE

erase
    Perform a mass erasing of the device firmware

reset
    Reset the target

OPTIONS

--version
    Print version information

--debug
    TODO

--reset
    TODO

--serial iSerial
    TODO

--flash=fsize
    Where fsize is the size in decimal, octal, or hex followed by an optional multiplier `k' for KB, or `m' for MB. Use a leading “0x” to specify hexadecimal, or a leading zero for octal.

EXAMPLES

Flash firmware.bin to device

    $ st-flash write firmware.bin 0x8000000

Read firmware from device (4096 bytes)

    $ st-flash read firmware.bin 0x8000000 4096

Erase firmware from device

    $ st-flash erase

SEE ALSO

st-util(1), st-info(1)

COPYRIGHT

This work is copyrighted. Stlink contributors. See LICENSE file in the stlink source distribution.