nm_access_point_get_flags ()

NM80211ApFlags
nm_access_point_get_flags (NMAccessPoint *ap);

Gets the flags of the access point.

nm_access_point_get_wpa_flags ()

NM80211ApSecurityFlags
nm_access_point_get_wpa_flags (NMAccessPoint *ap);

Gets the WPA (version 1) flags of the access point.

nm_access_point_get_rsn_flags ()

NM80211ApSecurityFlags
nm_access_point_get_rsn_flags (NMAccessPoint *ap);

Gets the RSN (Robust Secure Network, ie WPA version 2) flags of the access point.

nm_access_point_get_ssid ()

GBytes *
nm_access_point_get_ssid (NMAccessPoint *ap);

Gets the SSID of the access point.

nm_access_point_get_bssid ()

const char *
nm_access_point_get_bssid (NMAccessPoint *ap);

Gets the Basic Service Set ID (BSSID) of the Wi-Fi access point.

nm_access_point_get_frequency ()

guint32
nm_access_point_get_frequency (NMAccessPoint *ap);

Gets the frequency of the access point in MHz.

nm_access_point_get_mode ()

NM80211Mode
nm_access_point_get_mode (NMAccessPoint *ap);

Gets the mode of the access point.

nm_access_point_get_max_bitrate ()

guint32
nm_access_point_get_max_bitrate (NMAccessPoint *ap);

Gets the maximum bit rate of the access point in kbit/s.

nm_access_point_get_strength ()

guint8
nm_access_point_get_strength (NMAccessPoint *ap);

Gets the current signal strength of the access point as a percentage.

nm_access_point_get_last_seen ()

int
nm_access_point_get_last_seen (NMAccessPoint *ap);

Returns the timestamp (in CLOCK_BOOTTIME seconds) for the last time the access point was found in scan results. A value of -1 means the access point has not been found in a scan.

Since: 1.2

nm_access_point_filter_connections ()

GPtrArray *
nm_access_point_filter_connections (NMAccessPoint *ap,
                                    const GPtrArray *connections);

Filters a given array of connections for a given NMAccessPoint object and returns connections which may be activated with the access point. Any returned connections will match the ap 's SSID and (if given) BSSID and other attributes like security settings, channel, etc.

To obtain the list of connections that are compatible with this access point, use nm_client_get_connections() and then filter the returned list for a given NMDevice using nm_device_filter_connections() and finally filter that list with this function.

nm_access_point_connection_valid ()

gboolean
nm_access_point_connection_valid (NMAccessPoint *ap,
                                  NMConnection *connection);

Validates a given connection against a given Wi-Fi access point to ensure that the connection may be activated with that AP. The connection must match the ap 's SSID, (if given) BSSID, and other attributes like security settings, channel, band, etc.

NM_ACCESS_POINT_FLAGS

#define NM_ACCESS_POINT_FLAGS       "flags"

NM_ACCESS_POINT_WPA_FLAGS

#define NM_ACCESS_POINT_WPA_FLAGS   "wpa-flags"

NM_ACCESS_POINT_RSN_FLAGS

#define NM_ACCESS_POINT_RSN_FLAGS   "rsn-flags"

NM_ACCESS_POINT_SSID

#define NM_ACCESS_POINT_SSID        "ssid"

NM_ACCESS_POINT_BSSID

#define NM_ACCESS_POINT_BSSID       "bssid"

NM_ACCESS_POINT_FREQUENCY

#define NM_ACCESS_POINT_FREQUENCY   "frequency"

NM_ACCESS_POINT_MODE

#define NM_ACCESS_POINT_MODE        "mode"

NM_ACCESS_POINT_MAX_BITRATE

#define NM_ACCESS_POINT_MAX_BITRATE "max-bitrate"

NM_ACCESS_POINT_STRENGTH

#define NM_ACCESS_POINT_STRENGTH    "strength"

NM_ACCESS_POINT_LAST_SEEN

#define NM_ACCESS_POINT_LAST_SEEN   "last-seen"

NM_ACCESS_POINT_HW_ADDRESS

#define NM_ACCESS_POINT_HW_ADDRESS  "hw-address"

NMAccessPoint

typedef struct _NMAccessPoint NMAccessPoint;

The “bssid” property

  “bssid”                    gchar *

The BSSID of the access point.

Owner: NMAccessPoint

Flags: Read

Default value: NULL

The “flags” property

  “flags”                    NM80211ApFlags

The flags of the access point.

Owner: NMAccessPoint

Flags: Read

The “frequency” property

  “frequency”                guint

The frequency of the access point.

Owner: NMAccessPoint

Flags: Read

Allowed values: <= 10000

Default value: 0

The “hw-address” property

  “hw-address”               gchar *

Alias for “bssid”.

Owner: NMAccessPoint

Flags: Read

Default value: NULL

The “last-seen” property

  “last-seen”                gint

The timestamp (in CLOCK_BOOTTIME seconds) for the last time the access point was found in scan results. A value of -1 means the access point has not been found in a scan.

Owner: NMAccessPoint

Flags: Read

Allowed values: >= -1

Default value: -1

Since: 1.2

The “max-bitrate” property

  “max-bitrate”              guint

The maximum bit rate of the access point in kbit/s.

Owner: NMAccessPoint

Flags: Read

Default value: 0

The “mode” property

  “mode”                     NM80211Mode

The mode of the access point; either "infrastructure" (a central coordinator of the wireless network allowing clients to connect) or "ad-hoc" (a network with no central controller).

Owner: NMAccessPoint

Flags: Read

Default value: NM_802_11_MODE_INFRA

The “rsn-flags” property

  “rsn-flags”                NM80211ApSecurityFlags

The RSN flags of the access point.

Owner: NMAccessPoint

Flags: Read

The “ssid” property

  “ssid”                     GBytes *

The SSID of the access point, or NULL if it is not known.

Owner: NMAccessPoint

Flags: Read

The “strength” property

  “strength”                 guchar

The current signal strength of the access point.

Owner: NMAccessPoint

Flags: Read

Default value: 0

The “wpa-flags” property

  “wpa-flags”                NM80211ApSecurityFlags

The WPA flags of the access point.

Owner: NMAccessPoint

Flags: Read