| Top |
MmGdbusModemCdmaMmGdbusModemCdma — Generated C code for the org.freedesktop.ModemManager1.Modem.ModemCdma D-Bus interface |
| guint | mm_gdbus_modem_cdma_get_cdma1x_registration_state () |
| guint | mm_gdbus_modem_cdma_get_evdo_registration_state () |
| guint | mm_gdbus_modem_cdma_get_activation_state () |
| const gchar * | mm_gdbus_modem_cdma_get_esn () |
| gchar * | mm_gdbus_modem_cdma_dup_esn () |
| const gchar * | mm_gdbus_modem_cdma_get_meid () |
| gchar * | mm_gdbus_modem_cdma_dup_meid () |
| guint | mm_gdbus_modem_cdma_get_nid () |
| guint | mm_gdbus_modem_cdma_get_sid () |
| void | mm_gdbus_modem_cdma_call_activate () |
| gboolean | mm_gdbus_modem_cdma_call_activate_finish () |
| gboolean | mm_gdbus_modem_cdma_call_activate_sync () |
| void | mm_gdbus_modem_cdma_call_activate_manual () |
| gboolean | mm_gdbus_modem_cdma_call_activate_manual_finish () |
| gboolean | mm_gdbus_modem_cdma_call_activate_manual_sync () |
| guint | activation-state | Read / Write |
| guint | cdma1x-registration-state | Read / Write |
| gchar * | esn | Read / Write |
| guint | evdo-registration-state | Read / Write |
| gchar * | meid | Read / Write |
| guint | nid | Read / Write |
| guint | sid | Read / Write |
| void | activation-state-changed | Run Last |
| gboolean | handle-activate | Run Last |
| gboolean | handle-activate-manual | Run Last |
MmGdbusModemCdma is implemented by MMModemCdma, MmGdbusModemCdmaProxy and MmGdbusModemCdmaSkeleton.
This section contains code for working with the org.freedesktop.ModemManager1.Modem.ModemCdma D-Bus interface in C.
guint
mm_gdbus_modem_cdma_get_cdma1x_registration_state
(MmGdbusModemCdma *object);
Gets the value of the "Cdma1xRegistrationState" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
guint
mm_gdbus_modem_cdma_get_evdo_registration_state
(MmGdbusModemCdma *object);
Gets the value of the "EvdoRegistrationState" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
guint
mm_gdbus_modem_cdma_get_activation_state
(MmGdbusModemCdma *object);
Gets the value of the "ActivationState" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_modem_cdma_get_esn (MmGdbusModemCdma *object);
Gets the value of the "Esn" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
object was constructed. Use mm_gdbus_modem_cdma_dup_esn() if on another thread.[skip]
gchar *
mm_gdbus_modem_cdma_dup_esn (MmGdbusModemCdma *object);
Gets a copy of the "Esn" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_modem_cdma_get_meid (MmGdbusModemCdma *object);
Gets the value of the "Meid" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
object was constructed. Use mm_gdbus_modem_cdma_dup_meid() if on another thread.[skip]
gchar *
mm_gdbus_modem_cdma_dup_meid (MmGdbusModemCdma *object);
Gets a copy of the "Meid" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
guint
mm_gdbus_modem_cdma_get_nid (MmGdbusModemCdma *object);
Gets the value of the "Nid" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
guint
mm_gdbus_modem_cdma_get_sid (MmGdbusModemCdma *object);
Gets the value of the "Sid" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
void mm_gdbus_modem_cdma_call_activate (MmGdbusModemCdma *proxy,const gchar *arg_carrier_code,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the Activate()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call mm_gdbus_modem_cdma_call_activate_finish() to get the result of the operation.
See mm_gdbus_modem_cdma_call_activate_sync() for the synchronous, blocking version of this method.
gboolean mm_gdbus_modem_cdma_call_activate_finish (MmGdbusModemCdma *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_modem_cdma_call_activate().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_modem_cdma_call_activate_sync (MmGdbusModemCdma *proxy,const gchar *arg_carrier_code,GCancellable *cancellable,GError **error);
Synchronously invokes the Activate()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_cdma_call_activate() for the asynchronous version of this method.
void mm_gdbus_modem_cdma_call_activate_manual (MmGdbusModemCdma *proxy,GVariant *arg_properties,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the ActivateManual()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call mm_gdbus_modem_cdma_call_activate_manual_finish() to get the result of the operation.
See mm_gdbus_modem_cdma_call_activate_manual_sync() for the synchronous, blocking version of this method.
gboolean mm_gdbus_modem_cdma_call_activate_manual_finish (MmGdbusModemCdma *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_modem_cdma_call_activate_manual().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_modem_cdma_call_activate_manual_sync (MmGdbusModemCdma *proxy,GVariant *arg_properties,GCancellable *cancellable,GError **error);
Synchronously invokes the ActivateManual()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_cdma_call_activate_manual() for the asynchronous version of this method.
typedef struct _MmGdbusModemCdma MmGdbusModemCdma;
Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.ModemCdma.
struct MmGdbusModemCdmaIface {
GTypeInterface parent_iface;
gboolean (*handle_activate) (
MmGdbusModemCdma *object,
GDBusMethodInvocation *invocation,
const gchar *arg_carrier_code);
gboolean (*handle_activate_manual) (
MmGdbusModemCdma *object,
GDBusMethodInvocation *invocation,
GVariant *arg_properties);
guint (*get_activation_state) (MmGdbusModemCdma *object);
guint (*get_cdma1x_registration_state) (MmGdbusModemCdma *object);
const gchar * (*get_esn) (MmGdbusModemCdma *object);
guint (*get_evdo_registration_state) (MmGdbusModemCdma *object);
const gchar * (*get_meid) (MmGdbusModemCdma *object);
guint (*get_nid) (MmGdbusModemCdma *object);
guint (*get_sid) (MmGdbusModemCdma *object);
void (*activation_state_changed) (
MmGdbusModemCdma *object,
guint arg_activation_state,
guint arg_activation_error,
GVariant *arg_status_changes);
};
Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.ModemCdma.
The parent interface. |
||
Handler for the “handle-activate” signal. |
||
Handler for the “handle-activate-manual” signal. |
||
Getter for the “activation-state” property. |
||
Getter for the “cdma1x-registration-state” property. |
||
Getter for the “esn” property. |
||
Getter for the “evdo-registration-state” property. |
||
Getter for the “meid” property. |
||
Getter for the “nid” property. |
||
Getter for the “sid” property. |
||
Handler for the “activation-state-changed” signal. |
“activation-state” property “activation-state” guint
Represents the D-Bus property "ActivationState".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModemCdma
Flags: Read / Write
Default value: 0
“cdma1x-registration-state” property “cdma1x-registration-state” guint
Represents the D-Bus property "Cdma1xRegistrationState".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModemCdma
Flags: Read / Write
Default value: 0
“esn” property “esn” gchar *
Represents the D-Bus property "Esn".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModemCdma
Flags: Read / Write
Default value: NULL
“evdo-registration-state” property “evdo-registration-state” guint
Represents the D-Bus property "EvdoRegistrationState".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModemCdma
Flags: Read / Write
Default value: 0
“meid” property “meid” gchar *
Represents the D-Bus property "Meid".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModemCdma
Flags: Read / Write
Default value: NULL
“nid” property “nid” guint
Represents the D-Bus property "Nid".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModemCdma
Flags: Read / Write
Default value: 0
“sid” property “sid” guint
Represents the D-Bus property "Sid".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModemCdma
Flags: Read / Write
Default value: 0
“activation-state-changed” signalvoid user_function (MmGdbusModemCdma *object, guint arg_activation_state, guint arg_activation_error, GVariant *arg_status_changes, gpointer user_data)
On the client-side, this signal is emitted whenever the D-Bus signal "ActivationStateChanged" is received.
On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
object |
||
arg_activation_state |
Argument. |
|
arg_activation_error |
Argument. |
|
arg_status_changes |
Argument. |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last
“handle-activate” signalgboolean user_function (MmGdbusModemCdma *object, GDBusMethodInvocation *invocation, gchar *arg_carrier_code, gpointer user_data)
Signal emitted when a remote caller is invoking the Activate()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_modem_cdma_complete_activate() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
A GDBusMethodInvocation. |
|
arg_carrier_code |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last
“handle-activate-manual” signalgboolean user_function (MmGdbusModemCdma *object, GDBusMethodInvocation *invocation, GVariant *arg_properties, gpointer user_data)
Signal emitted when a remote caller is invoking the ActivateManual()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_modem_cdma_complete_activate_manual() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
A GDBusMethodInvocation. |
|
arg_properties |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last