Turinys
Rodyklė 🔎︎

# Jungiamosios linijos

Jungiamoji linija

Atverkite Jungiamųjų linijų priemonę, kur galite pasirinkti komandas pridėti jungiamąsias linijas esamos skaidrės objektams. Jungiamosios linijos jungia objektus ir lieka prijungtos prie jų, kai objektai perkeliami. Jei kopijuojate objektą su jungiamosios linijoms, tai jos taip pat nukopijuojamos.

Yra keturi jungiamųjų linijų tipai:

1. Jungiamoji laužtė (90 laipsnių kampu)

2. Jungiamoji linija

3. Jungiamoji atkarpa

4. Jungiamoji kreivė

Kai pasirenkate jungiamąją liniją ir perkeliate pelės žymeklį link užpildyto objekto arba neužpildyto objekto krašto, pasirodo jungiamieji taškai. Jungiamasis taškas yra fiksuotas taškas, su kuriuo galite sujungti jungiamąją liniją. Galite pridėti ir savo jungiamuosius taškus objektui.

Jei norite nubrėžti jungiamąją liniją, spustelėkite jungiamąjį tašką ant objekto ir laikydami nuspaudę pelės klavišą tempkite iki kito objekto jungiamojo taško. Galite tempti ir iki tuščios norimos vietos dokumente ir tada spragtelėti. Neprijungtas linijos galas lieka vietoje, kol jį tempsite į kitą vietą. Jei norite atskirti jungiamąją liniją, tai temkite jos galą sujungtą su objektu į kitą vietą dokumente.

## Jungiamoji linija

Braižo jungiamąją laužtę su vienu ar daugiau 90 laipsnių kampais. Spustelėkite jungiamąjį tašką ant objekto, tempkite iki kito objekto jungiamojo taško ir atleiskite pelės klavišą.

Jungiamoji linija

## Jungiamosios laužtės pradžioje rodyklė

Braižo jungiamąją laužtę su vienu ar daugiau 90 laipsnių kampais ir rodykle pradžioje. Spustelėkite jungiamąjį tašką ant objekto, tempkite iki kito objekto jungiamojo taško ir atleiskite pelės klavišą.

Jungiamosios laužtės pradžioje rodyklė

## Jungiamosios laužtės gale rodyklė

Braižo jungiamąją laužtę su vienu ar daugiau 90 laipsnių kampais ir rodykle pabaigoje. Spustelėkite jungiamąjį tašką ant objekto, tempkite iki kito objekto jungiamojo taško ir atleiskite pelės klavišą.

Jungiamosios laužtės gale rodyklė

## Jungiamoji laužtė su rodyklėmis galuose

Braižo jungiamąją laužtę su vienu ar daugiau 90 laipsnių kampais ir rodyklėmis galuose. Spustelėkite jungiamąjį tašką ant objekto, tempkite iki kito objekto jungiamojo taško ir atleiskite pelės klavišą.

Jungiamoji laužtė su rodyklėmis galuose

## Jungiamosios laužtės pradžioje skrituliukas

Braižo jungiamąją laužtę su vienu ar daugiau 90 laipsnių kampais ir skrituliuku pradžioje. Spustelėkite jungiamąjį tašką ant objekto, tempkite iki kito objekto jungiamojo taško ir atleiskite pelės klavišą.

Jungiamosios laužtės pradžioje skrituliukas

## Jungiamosios laužtės gale skrituliukas

Braižo jungiamąją laužtę su vienu ar daugiau 90 laipsnių kampais ir skrituliuku pabaigoje. Spustelėkite jungiamąjį tašką ant objekto, tempkite iki kito objekto jungiamojo taško ir atleiskite pelės klavišą.

Jungiamosios laužtės gale skrituliukas

## Jungiamoji laužtė su skrituliukais galuose

Braižo jungiamąją laužtę su vienu ar daugiau 90 laipsnių kampais ir skrituliukais galuose. Spustelėkite jungiamąjį tašką ant objekto, tempkite iki kito objekto jungiamojo taško ir atleiskite pelės klavišą.

Jungiamoji laužtė su skrituliukais galuose

## Jungiamoji linija

Draws a connector that bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Line Connector

## Line Connector Starts with Arrow

Draws a connector that starts with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Line Connector Starts with Arrow

## Line Connector Ends with Arrow

Draws a connector that ends with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Line Connector Ends with Arrow

## Line Connector with Arrows

Draws a connector that bends near a gluepoint and has arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Line Connector with Arrows

## Line Connector Starts with Circle

Draws a connector that starts with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Line Connector Starts with Circle

## Line Connector Ends with Circle

Draws a connector that ends with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Line Connector Ends with Circle

## Line Connector with Circles

Draws a connector that bends near a gluepoint and has circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point.

Line Connector with Circles

## Straight Connector

Draws a straight line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Straight Connector

## Straight Connector Starts with Arrow

Draws a straight line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Straight Connector Starts with Arrow

## Straight Connector Ends with Arrow

Draws a straight line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Straight Connector Ends with Arrow

## Straight Connector with Arrows

Draws a straight line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Straight Connector with Arrows

## Straight Connector Starts with Circle

Draws a straight line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Straight Connector Starts with Circle

## Straight Connector Ends with Circle

Draws a straight line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Straight Connector Ends with Circle

## Straight Connector with Circles

Draws a straight line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Straight Connector with Circles

## Curved Connector

Draws a curved line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Curved Connector

## Curved Connector Starts with Arrow

Draws a curved line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Curved Connector Starts with Arrow

## Curved Connector Ends with Arrow

Draws a curved line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Curved Connector Ends with Arrow

## Curved Connector with Arrows

Draws a curved line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Curved Connector with Arrows

## Curved Connector Starts with Circle

Draws a curved line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Curved Connector Starts with Circle

## Curved Connector Ends with Circle

Draws a curved line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Curved Connector Ends with Circle

## Curved Connector with Circles

Draws a curved line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release.

Curved Connector with Circles

Susijusios temos

Creating a Flowchart