AFEW(1)

NAME
afew - afew Documentation

afew is an initial tagging script for notmuch mail:

•   http://notmuchmail.org/

•   http://notmuchmail.org/initial_tagging/

    Its basic task is to provide automatic tagging each time new mail is registered with notmuch. In a classic setup, you might call it after notmuch new in an offlineimap post sync hook or in the notmuch post-new hook.

    It can do basic thing such as adding tags based on email headers or maildir folders, handling killed threads and spam.

    fyi: afew plays nicely with alot, a GUI for notmuch mail ;)

•   https://github.com/pazz/alot

    Contents:

QUICK START

The steps to get up and running are:

•   install the afew package

•   create the config files

•   add a notmuch post-new hook that calls afew

  Install

The following commands will get you going on Debian/Ubuntu systems:

$ sudo aptitude install notmuch python-notmuch dbacl
$ git clone git://github.com/teythoon/afew.git
$ cd afew
$ python setup.py install --prefix

Ensure that ~/.local/bin is in your path. One way is to add the following to your ~/.bashrc:

if [ -d ~/.local/bin ]; then
    PATH=$PATH:~/.local/bin
fi

See installation for a more detailed guide.

  Initial Config

Make sure that ~/.notmuch-config reads:

[new]
tags=new

Put a list of filters into ~/.config/afew/config:

# This is the default filter chain
[SpamFilter]
[KillThreadsFilter]
[ListMailsFilter]
[ArchiveSentMailsFilter]
[InboxFilter]

And create a post-new hook for notmuch.

$ mkdir -p path/to/maildir/.notmuch/hooks
$ touch path/to/maildir/.notmuch/hooks/post-new

Then edit the post-new file to contain:

#!/bin/sh
$HOME/.local/bin/afew --tag --new

  Next Steps

You can:

•   add extra filters for more custom filtering

•   make use of the move_mode to move your email between folders

•   run afew against all your old mail by running afew --tag --all

•   start extending afew

INSTALLATION

  Requirements

afew works with python 3.4+, and requires notmuch and its python bindings. On Debian/Ubuntu systems you can install these by doing:

$ sudo aptitude install notmuch python-notmuch python-dev python-setuptools

Note: if you are installing notmuch using Homebrew on macOS, make sure to run $ brew install --with-python3 notmuch, because the brew formula doesn't install python3 notmuch bindings by default.

  Unprivileged Install

It is recommended to install afew itself inside a virtualenv as an unprivileged user, either via checking out the source code and installing via setup.py, or via pip.

# create and activate virtualenv
$ python -m venv --system-site-packages .venv
$ source .venv/bin/activate
# install via pip from PyPI:
$ pip install afew
# or install from source:
$ python setup.py install --prefix=~/.local

You might want to symlink .venv/bin/afew somewhere inside your path (~/bin/ in this case):

$ ln -snr .venv/bin/afew ~/.bin/afew

  Building documentation

Documentation can be built in various formats using Sphinx:

# build docs into build/sphinx/{html,man}
$ python setup.py build_sphinx -b html,man

COMMAND LINE USAGE

Ultimately afew is a command line tool. You have to specify an action, and whether to act on all messages, or only on new messages. The actions you can choose from are:

tag run the tag filters. See Initial tagging.

watch
    continuously monitor the mailbox for new files

move-mails
    move mail files between maildir folders

  Initial tagging

Basic tagging stuff requires no configuration, just run

$ afew --tag --new
# or to tag *all* messages
$ afew --tag --all

To do this automatically you can add the following hook into your ~/.offlineimaprc:

postsynchook = ionice -c 3 chrt --idle 0 /bin/sh -c "notmuch new && afew --tag --new"

There is a lot more to say about general filter configuration and the different filters provided by afew.

  Simulation

Adding --dry-run to any --tag or --sync-tags action prevents modification of the notmuch db. Add some -vv goodness to see some action.

  Move Mode

To invoke afew in move mode, provide the --move-mails option on the command line. Move mode will respect --dry-run, so throw in --verbose and watch what effects a real run would have.

In move mode, afew will check all mails (or only recent ones) in the configured maildir folders, deciding whether they should be moved to another folder.

The decision is based on rules defined in your config file. A rule is bound to a source folder and specifies a target folder into which a mail will be moved that is matched by an associated query.

This way you will be able to transfer your sorting principles roughly to the classic folder based maildir structure understood by your traditional mail server. Tag your mails with notmuch, call afew --move-mails in an offlineimap presynchook and enjoy a clean inbox in your webinterface/GUI-client at work.

For information on how to configure rules for move mode, what you can do with it and what you can't, please refer to move_mode.

  Commandline help

The full set of options is:

$ afew --help
Usage: afew [options] [--] [query]
Options:
  -h, --help            show this help message and exit
  Actions:
    Please specify exactly one action.
    -t, --tag           run the tag filters
    -w, --watch         continuously monitor the mailbox for new files
    -m, --move-mails    move mail files between maildir folders
  Query modifiers:
    Please specify either --all or --new or a query string.
    -a, --all           operate on all messages
    -n, --new           operate on all new messages
  General options:
    -C NOTMUCH_CONFIG, --notmuch-config=NOTMUCH_CONFIG
                        path to the notmuch configuration file [default:
                        $NOTMUCH_CONFIG or ~/.notmuch-config]
    -e ENABLE_FILTERS, --enable-filters=ENABLE_FILTERS
                        filter classes to use, separated by ',' [default:
                        filters specified in afew's config]
    -d, --dry-run       don't change the db [default: False]
    -R REFERENCE_SET_SIZE, --reference-set-size=REFERENCE_SET_SIZE
                        size of the reference set [default: 1000]
    -T DAYS, --reference-set-timeframe=DAYS
                        do not use mails older than DAYS days [default: 30]
    -v, --verbose       be more verbose, can be given multiple times

CONFIGURATION

  Configuration File

Customization of tag filters takes place in afew's config file in ~/.config/afew/config.

  NotMuch Config

afew tries to adapt to the new tag that notmuch sets on new email, but has mostly been developed and used against the new tag. To use that, make sure that ~/.notmuch-config contains:

[new]
tags=new

afew reads the notmuch database location from notmuch config. When no database path is set in notmuch config, afew uses the MAILDIR environment variable when set, or $HOME/mail as a fallback, like notmuch CLI does. If a relative path is provided, afew prepends $HOME/ to the path in the same manner as notmuch, which was introduced in version 0.28 of notmuch.

  Filter Configuration

You can modify filters, and define your own versions of the base Filter that allow you to tag messages in a similar way to the notmuch tag command, using the config file. The default config file is:

[SpamFilter]
[KillThreadsFilter]
[ListMailsFilter]
[ArchiveSentMailsFilter]
sent_tag = ''
[InboxFilter]

See the filters page for the details of those filters and the custom arguments they accept.

You can add filters based on the base filter as well. These can be customised by specifying settings beneath them. The standard settings, which apply to all filters, are:

message
    text that will be displayed while running this filter if the verbosity is high enough.

query
    the query to use against the messages, specified in standard notmuch format. Note that you don't need to specify the new tag - afew will add that when run with the --new flag.

tags
    the tags to add or remove for messages that match the query. Tags to add are preceded by a + and tags to remove are preceded by a -. Multiple tags are separated by semicolons.

tags_blacklist
    if the message has one of these tags, don't add tags to it. Tags are separated by semicolons.

    So to add the deer tag to any message to or from antelope@deer.com you could do:

    [Filter.1]
    query = 'antelope@deer.com'
    tags = +deer
    message = Wild animals ahoy

    You can also (in combination with the InboxFilter) have email skip the Inbox by removing the new tag before you get to the InboxFilter:

    [Filter.2]
    query = from'pointyheaded@boss.com'
    tags = -new;+boss
    message = Message from above

  Full Sample Config

Showing some sample configs is the easiest way to understand. The notmuch initial tagging page shows a sample config:

# immediately archive all messages from "me"
notmuch tag -new -- tag:new and from:me@example.com
# delete all messages from a spammer:
notmuch tag +deleted -- tag:new and from:spam@spam.com
# tag all message from notmuch mailing list
notmuch tag +notmuch -- tag:new and to:notmuch@notmuchmail.org
# finally, retag all "new" messages "inbox" and "unread"
notmuch tag +inbox +unread -new -- tag:new

The (roughly) equivalent set up in afew would be:

[ArchiveSentMailsFilter]
[Filter.1]
message = Delete all messages from spammer
query = from:spam@spam.com
tags = +deleted;-new
[Filter.2]
message = Tag all messages from the notmuch mailing list
query = to:notmuch@notmuchmail.org
tags = +notmuch
[InboxFilter]

Not that the queries do not generally include tag:new because this is implied when afew is run with the --new flag.

The differences between them is that

•   the ArchiveSentMailsFilter will add tags specified by sent_tag option (default '' means add no tags. You may want to set it to sent), as well as archiving the email. And it will not archive email that has been sent to one of your own addresses.

•   the InboxFilter does not add the unread tag. But most mail clients will manage the unread status directly in maildir.

  More Filter Examples

Here are a few more example filters from github dotfiles:

[Filter.1]
query = 'sicsa-students@sicsa.ac.uk'
tags = +sicsa
message = sicsa
[Filter.2]
query = 'from:foosoc.ed@gmail.com OR from:GT Silber OR from:lizzie.brough@eusa.ed.ac.uk'
tags = +soc;+foo
message = foosoc
[Filter.3]
query = 'folder:gmail/G+'
tags = +G+
message = gmail spam
# skip inbox
[Filter.6]
query = 'to:notmuch@notmuchmail.org AND (subject:emacs OR subject:elisp OR "(defun" OR "(setq" OR PATCH)'
tags = -new
message = notmuch emacs stuff

FILTERS

The default filter set (if you don't specify anything in the config) is:

[SpamFilter]
[KillThreadsFilter]
[ListMailsFilter]
[ArchiveSentMailsFilter]
[InboxFilter]

The standard filter configuration can be applied to these filters as well. Though note that most of the filters below set their own value for message, query and/or tags, and some ignore some of the standard settings.

  ArchiveSentMailsFilter

It extends SentMailsFilter with the following feature:

•   Emails filtered by this filter have the new tag removed, so will not have the inbox tag added by the InboxFilter.

  DKIMValidityFilter

This filter verifies DKIM signatures of E-Mails with DKIM header, and adds dkin-ok or dkin-fail tags.

  DMARCReportInspectionFilter

DMARC reports usually come in ZIP files. To check the report you have to unpack and search thru XML document which is very tedious. This filter tags the message as follows:

if there's any SPF failure in any attachment, tag the message with "dmarc-spf-fail" tag, otherwise tag with "dmarc-spf-ok"

if there's any DKIM failure in any attachment, tag the message with "dmarc-dkim-fail" tag, otherwise tag with "dmarc-dkim-ok"

  FolderNameFilter

For each email, it looks at all folders it is in, and uses the path and filename as a tag, for the email. So if you have a procmail or sieve set up that puts emails in folders for you, this might be useful.

•   folder_explicit_list = <folder list>

•   Tag mails with tag in <folder list> only. <folder list> is a space separated list, not enclosed in quotes or any other way.

•   Empty list means all folders (of course blacklist still applies).

•   The default is empty list.

•   You may use it e.g. to set tags only for specific folders like 'Sent'.

•   folder_blacklist = <folder list>

•   Never tag mails with tag in <folder list>. <folder list> is a space separated list, not enclosed in quotes or any other way.

•   The default is to blacklist no folders.

•   You may use it e.g. to avoid mails being tagged as 'INBOX' when there is the more standard 'inbox' tag.

•   folder_transforms = <transformation rules>

•   Transform folder names according to the specified rules before tagging mails. <transformation rules> is a space separated list consisting of 'folder:tag' style pairs. The colon separates the name of the folder to be transformed from the tag it is to be transformed into.

•   The default is to transform to folder names.

•   You may use the rules e.g. to transform the name of your 'Junk' folder into your 'spam' tag or fix capitalization of your draft and sent folder:

    folder_transforms = Junk:spam Drafts:draft Sent:sent

•   folder_lowercases = true

•   Use lowercase tags for all folder names

•   maildir_separator = <sep>

•   Use <sep> to split your maildir hierarchy into individual tags.

•   The default is to split on '.'

•   If your maildir hierarchy is represented in the filesystem as collapsed dirs, <sep> is used to split it again before applying tags. If your maildir looks like this:

    [...]
    /path/to/maildir/devel.afew/[cur|new|tmp]/...
    /path/to/maildir/devel.alot/[cur|new|tmp]/...
    /path/to/maildir/devel.notmuch/[cur|new|tmp]/...
    [...]

    the mails in your afew folder will be tagged with 'devel' and 'afew'.

    If instead your hierarchy is split by a more conventional '/' or any other divider

    [...]
    /path/to/maildir/devel/afew/[cur|new|tmp]/...
    /path/to/maildir/devel/alot/[cur|new|tmp]/...
    /path/to/maildir/devel/notmuch/[cur|new|tmp]/...
    [...]

    you need to configure that divider to have your mails properly tagged:

    maildir_separator = /

  HeaderMatchingFilter

This filter adds tags to a message if the named header matches the regular expression given. The tags can be set, or based on the match. The settings you can use are:

•   header = <header_name>

•   pattern = <regex_pattern>

•   tags = <tag_list>

    If you surround a tag with {} then it will be replaced with the named match.

    Some examples are:

    [HeaderMatchingFilter.1]
    header = X-Spam-Flag
    pattern = YES
    tags = +spam
    [HeaderMatchingFilter.2]
    header = List-Id
    pattern = <(?P<list_id>.*)>
    tags = +lists;+{list_id}
    [HeaderMatchingFilter.3]
    header = X-Redmine-Project
    pattern = (?P<project>.*)
    tags = +redmine;+{project}

    SpamFilter and ListMailsFilter are implemented using HeaderMatchingFilter, and are only slightly more complicated than the above examples.

  InboxFilter

This removes the new tag, and adds the inbox tag, to any message that isn't killed or spam. (The new tags are set in your notmuch config, and default to just new.)

  KillThreadsFilter

If the new message has been added to a thread that has already been tagged killed then add the killed tag to this message. This allows for ignoring all replies to a particular thread.

  ListMailsFilter

This filter looks for the List-Id header, and if it finds it, adds a tag lists and a tag named lists/<list-id>.

  MeFilter

Add filter tagging mail sent directly to any of addresses defined in Notmuch config file: primary_email or other_email. Default tag is to-me and can be customized with me_tag option.

  SentMailsFilter

The settings you can use are:

•   sent_tag = <tag>

•   Add <tag> to all mails sent from one of your configured mail addresses, and not to any of your addresses.

•   The default is to add no tag, so you need to specify something.

•   You may e.g. use it to tag all mails sent by you as 'sent'. This may make special sense in conjunction with a mail client that is able to not only search for threads but individual mails as well.

•   to_transforms = <transformation rules>

•   Transform To/Cc/Bcc e-mail addresses to tags according to the specified rules. <transformation rules> is a space separated list consisting of 'user_part@domain_part:tags' style pairs. The colon separates the e-mail address to be transformed from tags it is to be transformed into. ':tags' is optional and if empty, 'user_part' is used as tag. 'tags' can be a single tag or semi-colon separated list of tags.

•   It can be used for example to easily tag posts sent to mailing lists which at this stage don't have List-Id field.

  SpamFilter

The settings you can use are:

•   spam_tag = <tag>

•   Add <tag> to all mails recognized as spam.

•   The default is 'spam'.

•   You may use it to tag your spam as 'junk', 'scum' or whatever suits your mood. Note that only a single tag is supported here.

    Email will be considered spam if the header X-Spam-Flag is present.

  Customizing filters

To customize these filters, there are basically two different possibilities:

Let's say you like the SpamFilter, but it is way too polite

1.  Create an filter object and customize it

    [SpamFilter.0] # note the index
    message = meh

    The index is required if you want to create a new SpamFilter in addition to the default one. If you need just one customized SpamFilter, you can drop the index and customize the default instance.

2.  Create a new type...

    [ShitFilter(SpamFilter)]
    message = I hatez teh spam!

    and create an object or two

    [ShitFilter.0]
    [ShitFilter.1]
    message = Me hatez it too.

    You can provide your own filter implementations too. You have to register your filters via entry points. See the afew setup.py for examples on how to register your filters. To add your filters, you just need to install your package in the context of the afew application.

MOVE MODE

  Configuration Section

Here is a full sample configuration for move mode:

[MailMover]
folders = INBOX Junk
rename = False
max_age = 15
# rules
INBOX = 'tag:spam':Junk 'NOT tag:inbox':Archive
Junk = 'NOT tag:spam AND tag:inbox':INBOX 'NOT tag:spam':Archive

Below we explain what each bit of this means.

  Rules

First you need to specify which folders should be checked for mails that are to be moved (as a whitespace separated list). Folder names containing whitespace need to be quoted:

folders = INBOX Junk "Sent Mail"

Then you have to specify rules that define move actions of the form

<src> = ['<qry>':<dst>]+

Every mail in the <src> folder that matches a <qry> will be moved into the <dst> folder associated with that query. A message that matches multiple queries will be copied to multiple destinations.

You can bind as many rules to a maildir folder as you deem necessary. Just add them as elements of a (whitespace separated) list.

Please note, though, that you need to specify at least one rule for every folder given by the folders option and at least one folder to check in order to use the move mode.

INBOX = 'tag:spam':Junk

will bind one rule to the maildir folder INBOX that states that all mails in said folder that carry (potentially among others) the tag spam are to be moved into the folder Junk.

With <qry> being an arbitrary notmuch query, you have the power to construct arbitrarily flexible rules. You can check for the absence of tags and look out for combinations of attributes:

Junk = 'NOT tag:spam AND tag:inbox':INBOX 'NOT tag:spam':Archive

The above rules will move all mails in Junk that don't have the spam tag but do have an inbox tag into the directory INBOX. All other mails not tagged with spam will be moved into Archive.

  Max Age

You can limit the age of mails you want to move by setting the max_age option in the configuration section. By providing

max_age = 15

afew will only check mails at most 15 days old.

  Rename

Set this option if you are using the mbsync IMAP syncing tool. mbsync adds a unique identifier to files' names when it syncs them. If the rename option is not set, moving files can cause UID conflicts and prevent mbsync from syncing with error messages such as "Maildir error: duplicate UID 1234" or "UID 567 is beyond highest assigned UID 89".

When the option is set, afew will rename files while moving them, removing the UID but preserving other mbsync information. This allows mbsync to assign a new UID to the file and avoid UID conflicts.

If you are using offlineimap, you can safely ignore this option.

rename = True

  Limitations

(1) Rules don't manipulate tags.

INBOX = 'NOT tag:inbox':Archive
Junk = 'NOT tag:spam':INBOX

The above combination of rules might prove tricky, since you might expect de-spammed mails to end up in INBOX. But since the Junk rule will not add an inbox tag, the next run in move mode might very well move the matching mails into Archive.

Then again, if you remove the spam tag and do not set an inbox tag, how would you come to expect the mail would end up in your INBOX folder after moving it? ;)

(2) There is no 1:1 mapping between folders and tags. And that's a feature. If you tag a mail with two tags and there is a rule for each of them, both rules will apply. Your mail will be copied into two destination folders, then removed from its original location.

EXTENDING AFEW

You can put python files in ~/.config/afew/ and they will be imported by afew. If you use that python file to define a Filter class and use the register_filter decorator then you can refer to it in your filter configuration.

So an example small filter you could add might be:

from afew.filters.BaseFilter  import Filter
from afew.FilterRegistry import register_filter
PROJECT_MAPPING = {
    'fabric': 'deployment',
    'oldname': 'new-name',
}
@register_filter
class RedmineFilter(Filter):
    message = 'Create tag based on redmine project'
    query = 'NOT tag:redmine'
    def handle_message(self, message):
        project = message.get_header('X-Redmine-Project')
        if project in PROJECT_MAPPING:
            project = PROJECT_MAPPING[project]
        self.add_tags(message, 'redmine', project)

We have defined the message and query class variables that are used by the parent class Filter. The message is printed when running with verbose flags. The query is used to select messages to run against - here we ensure we don't bother looking at messages we've already looked at.

The handle_message() method is the key one to implement. This will be called for each message that matches the query. The argument is a notmuch message object and the key methods used by the afew filters are get_header(), get_filename() and get_thread().

Of the methods inherited from the Filter class the key ones are add_tags() and remove_tags(), but read about the implementation or just read the source code to get your own ideas.

Once you've defined your filter, you can add it to your config like any other filter:

[RedmineFilter]

IMPLEMENTATION

  Database Manager

The design of the database manager was inspired by alots database manager alot.db.DBManager.

class afew.Database.Database
    Convenience wrapper around notmuch.

add_message(path, sync_maildir_flags=False, new_mail_handler=None)
    Adds the given message to the notmuch index.

Parameters

•   path (str) -- path to the message

•   sync_maildir_flags (bool) -- if True notmuch converts the standard maildir flags to tags

•   new_mail_handler (a function that is called with a notmuch.Message object as its only argument) -- callback for new messages

Raises
    notmuch.NotmuchError if adding the message fails

Returns
    a notmuch.Message object

close()
    Closes the notmuch database if it has been opened.

do_query(query)
    Executes a notmuch query.

Parameters
    query (str) -- the query to execute

Returns
    the query result

Return type
    notmuch.Query

get_messages(query, full_thread=False)
    Get all messages mathing the given query.

Parameters

•   query (str) -- the query to execute using Database.do_query()

•   full_thread (bool) -- return all messages from mathing threads

Returns
    an iterator over notmuch.Message objects

remove_message(path)
    Remove the given message from the notmuch index.

Parameters
    path (str) -- path to the message

walk_replies(message)
    Returns all replies to the given message.

Parameters
    message (notmuch.Message) -- the message to start from

Returns
    an iterator over notmuch.Message objects

walk_thread(thread)
    Returns all messages in the given thread.

Parameters
    message (notmuch.Thread) -- the tread you are interested in

Returns
    an iterator over notmuch.Message objects

  Filter

class afew.filters.BaseFilter.Filter(database, **kwargs)

flush_changes()
    (Re)Initializes the data structures that hold the enqueued changes to the notmuch database.

  Configuration management

  Miscellanious utility functions

afew.utils.filter_compat(*args)
    Compatibility wrapper for filter builtin.

    The semantic of the filter builtin has been changed in python3.x. This is a temporary workaround to support both python versions in one code base.

•   genindex

•   modindex

•   search

AUTHOR
Justus Winter

COPYRIGHT
afewmail project