| Top |
MmGdbusBearerMmGdbusBearer — Generated C code for the org.freedesktop.ModemManager1.Bearer D-Bus interface |
| const gchar * | mm_gdbus_bearer_get_interface () |
| gchar * | mm_gdbus_bearer_dup_interface () |
| GVariant * | mm_gdbus_bearer_get_ip4_config () |
| GVariant * | mm_gdbus_bearer_dup_ip4_config () |
| GVariant * | mm_gdbus_bearer_get_ip6_config () |
| GVariant * | mm_gdbus_bearer_dup_ip6_config () |
| guint | mm_gdbus_bearer_get_ip_timeout () |
| GVariant * | mm_gdbus_bearer_get_properties () |
| GVariant * | mm_gdbus_bearer_dup_properties () |
| gboolean | mm_gdbus_bearer_get_connected () |
| gboolean | mm_gdbus_bearer_get_suspended () |
| guint | mm_gdbus_bearer_get_bearer_type () |
| GVariant * | mm_gdbus_bearer_get_stats () |
| GVariant * | mm_gdbus_bearer_dup_stats () |
| void | mm_gdbus_bearer_call_connect () |
| gboolean | mm_gdbus_bearer_call_connect_finish () |
| gboolean | mm_gdbus_bearer_call_connect_sync () |
| void | mm_gdbus_bearer_call_disconnect () |
| gboolean | mm_gdbus_bearer_call_disconnect_finish () |
| gboolean | mm_gdbus_bearer_call_disconnect_sync () |
| guint | bearer-type | Read / Write |
| gboolean | connected | Read / Write |
| gchar * | interface | Read / Write |
| guint | ip-timeout | Read / Write |
| GVariant * | ip4-config | Read / Write |
| GVariant * | ip6-config | Read / Write |
| GVariant * | properties | Read / Write |
| GVariant * | stats | Read / Write |
| gboolean | suspended | Read / Write |
MmGdbusBearer is implemented by MMBearer, MmGdbusBearerProxy and MmGdbusBearerSkeleton.
This section contains code for working with the org.freedesktop.ModemManager1.Bearer D-Bus interface in C.
const gchar *
mm_gdbus_bearer_get_interface (MmGdbusBearer *object);
Gets the value of the "Interface" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
object was constructed. Use mm_gdbus_bearer_dup_interface() if on another thread.[skip]
gchar *
mm_gdbus_bearer_dup_interface (MmGdbusBearer *object);
Gets a copy of the "Interface" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
GVariant *
mm_gdbus_bearer_get_ip4_config (MmGdbusBearer *object);
Gets the value of the "Ip4Config" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
object was constructed. Use mm_gdbus_bearer_dup_ip4_config() if on another thread.[skip]
GVariant *
mm_gdbus_bearer_dup_ip4_config (MmGdbusBearer *object);
Gets a copy of the "Ip4Config" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
GVariant *
mm_gdbus_bearer_get_ip6_config (MmGdbusBearer *object);
Gets the value of the "Ip6Config" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
object was constructed. Use mm_gdbus_bearer_dup_ip6_config() if on another thread.[skip]
GVariant *
mm_gdbus_bearer_dup_ip6_config (MmGdbusBearer *object);
Gets a copy of the "Ip6Config" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
guint
mm_gdbus_bearer_get_ip_timeout (MmGdbusBearer *object);
Gets the value of the "IpTimeout" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
GVariant *
mm_gdbus_bearer_get_properties (MmGdbusBearer *object);
Gets the value of the "Properties" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
object was constructed. Use mm_gdbus_bearer_dup_properties() if on another thread.[skip]
GVariant *
mm_gdbus_bearer_dup_properties (MmGdbusBearer *object);
Gets a copy of the "Properties" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
gboolean
mm_gdbus_bearer_get_connected (MmGdbusBearer *object);
Gets the value of the "Connected" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
gboolean
mm_gdbus_bearer_get_suspended (MmGdbusBearer *object);
Gets the value of the "Suspended" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
guint
mm_gdbus_bearer_get_bearer_type (MmGdbusBearer *object);
Gets the value of the "BearerType" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
GVariant *
mm_gdbus_bearer_get_stats (MmGdbusBearer *object);
Gets the value of the "Stats" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
object was constructed. Use mm_gdbus_bearer_dup_stats() if on another thread.[skip]
GVariant *
mm_gdbus_bearer_dup_stats (MmGdbusBearer *object);
Gets a copy of the "Stats" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
void mm_gdbus_bearer_call_connect (MmGdbusBearer *proxy,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the Connect()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call mm_gdbus_bearer_call_connect_finish() to get the result of the operation.
See mm_gdbus_bearer_call_connect_sync() for the synchronous, blocking version of this method.
gboolean mm_gdbus_bearer_call_connect_finish (MmGdbusBearer *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_bearer_call_connect().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_bearer_call_connect_sync (MmGdbusBearer *proxy,GCancellable *cancellable,GError **error);
Synchronously invokes the Connect()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_bearer_call_connect() for the asynchronous version of this method.
void mm_gdbus_bearer_call_disconnect (MmGdbusBearer *proxy,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the Disconnect()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call mm_gdbus_bearer_call_disconnect_finish() to get the result of the operation.
See mm_gdbus_bearer_call_disconnect_sync() for the synchronous, blocking version of this method.
gboolean mm_gdbus_bearer_call_disconnect_finish (MmGdbusBearer *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_bearer_call_disconnect().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_bearer_call_disconnect_sync (MmGdbusBearer *proxy,GCancellable *cancellable,GError **error);
Synchronously invokes the Disconnect()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_bearer_call_disconnect() for the asynchronous version of this method.
typedef struct _MmGdbusBearer MmGdbusBearer;
Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Bearer.
struct MmGdbusBearerIface {
GTypeInterface parent_iface;
gboolean (*handle_connect) (
MmGdbusBearer *object,
GDBusMethodInvocation *invocation);
gboolean (*handle_disconnect) (
MmGdbusBearer *object,
GDBusMethodInvocation *invocation);
guint (*get_bearer_type) (MmGdbusBearer *object);
gboolean (*get_connected) (MmGdbusBearer *object);
const gchar * (*get_interface) (MmGdbusBearer *object);
GVariant * (*get_ip4_config) (MmGdbusBearer *object);
GVariant * (*get_ip6_config) (MmGdbusBearer *object);
guint (*get_ip_timeout) (MmGdbusBearer *object);
GVariant * (*get_properties) (MmGdbusBearer *object);
GVariant * (*get_stats) (MmGdbusBearer *object);
gboolean (*get_suspended) (MmGdbusBearer *object);
};
Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Bearer.
The parent interface. |
||
Handler for the “handle-connect” signal. |
||
Handler for the “handle-disconnect” signal. |
||
Getter for the “bearer-type” property. |
||
Getter for the “connected” property. |
||
Getter for the “interface” property. |
||
Getter for the “ip4-config” property. |
||
Getter for the “ip6-config” property. |
||
Getter for the “ip-timeout” property. |
||
Getter for the “properties” property. |
||
Getter for the “stats” property. |
||
Getter for the “suspended” property. |
“bearer-type” property “bearer-type” guint
Represents the D-Bus property "BearerType".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusBearer
Flags: Read / Write
Default value: 0
“connected” property “connected” gboolean
Represents the D-Bus property "Connected".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusBearer
Flags: Read / Write
Default value: FALSE
“interface” property “interface” gchar *
Represents the D-Bus property "Interface".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusBearer
Flags: Read / Write
Default value: NULL
“ip-timeout” property “ip-timeout” guint
Represents the D-Bus property "IpTimeout".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusBearer
Flags: Read / Write
Default value: 0
“ip4-config” property “ip4-config” GVariant *
Represents the D-Bus property "Ip4Config".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusBearer
Flags: Read / Write
Allowed values: GVariant<a{sv}>
Default value: NULL
“ip6-config” property “ip6-config” GVariant *
Represents the D-Bus property "Ip6Config".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusBearer
Flags: Read / Write
Allowed values: GVariant<a{sv}>
Default value: NULL
“properties” property “properties” GVariant *
Represents the D-Bus property "Properties".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusBearer
Flags: Read / Write
Allowed values: GVariant<a{sv}>
Default value: NULL
“stats” property “stats” GVariant *
Represents the D-Bus property "Stats".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusBearer
Flags: Read / Write
Allowed values: GVariant<a{sv}>
Default value: NULL
“suspended” property “suspended” gboolean
Represents the D-Bus property "Suspended".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusBearer
Flags: Read / Write
Default value: FALSE
“handle-connect” signalgboolean user_function (MmGdbusBearer *object, GDBusMethodInvocation *invocation, gpointer user_data)
Signal emitted when a remote caller is invoking the Connect()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_bearer_complete_connect() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
A GDBusMethodInvocation. |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last
“handle-disconnect” signalgboolean user_function (MmGdbusBearer *object, GDBusMethodInvocation *invocation, gpointer user_data)
Signal emitted when a remote caller is invoking the Disconnect()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_bearer_complete_disconnect() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
||
invocation |
A GDBusMethodInvocation. |
|
user_data |
user data set when the signal handler was connected. |
Flags: Run Last