<Product Revision="2" xmlns="https://github.com/OpenZWave/open-zwave">
  <!--
Qubino: ZMNHXDx 3-phase Smart Meter
-->

	<!-- Configuration -->
  <CommandClass id="112">
    <Value genre="config" index="7" instance="1" label="Input switch function selection" max="5" min="0" size="1" type="list" value="0">
      <Help></Help>
      <Item label="disabled" value="0"/>
      <Item label="IR external relay control - mono stable push button" value="2"/>
      <Item label="IR external relay control - bi-stable switch" value="3"/>
      <Item label="External relay control - mono stable push button" value="4"/>
      <Item label="External relay control - bi-stable switch" value="5"/>
    </Value>
    <Value genre="config" index="40" instance="1" label="Reporting on power change" max="100" min="0" size="1" type="byte" value="50">
      <Help>This parameter is valid for Active Power Total, Active Power Phase1, Active Power Phase2 and Active Power Phase3. Set value means percentage from 0-100 = 0% - 100%</Help>
    </Value>
    <Value genre="config" index="42" instance="1" label="Reporting on time interval" max="65536" min="0" size="2" type="short" value="600">
      <Help>This parameter is currently valid only for Active Energy Total Import/Export (kWh), Reactive Energy Total (kvarh), Total Energy (kVAh)</Help>
    </Value>
    <Value genre="config" index="43" instance="1" label="Other Values - Reporting on time interval" max="65536" min="0" size="2" type="short" value="600">
      <Help>This parameter is valid only for Voltage (V of ph1, ph2, ph3), Current (A of ph1, ph2, ph3), Total Power Factor, Total Reactive Power (var)</Help>
    </Value>
    <Value genre="config" index="100" instance="1" label="Enable / Disable External IR relay (BICOM)" max="2" min="0" size="1" type="list" value="0">
      <Help></Help>
      <Item label="External IR relay disabled" value="0"/>
      <Item label="External IR relay enabled and connected to all 3 Phases" value="1"/>
      <Item label="External IR relay enabled and connected to a Phase 1" value="2"/>
    </Value>
    <Value genre="config" index="101" instance="1" label="Enable / Disable External relay (IKA)" max="1" min="0" size="1" type="list" value="0">
      <Help></Help>
      <Item label="External relay disabled" value="0"/>
      <Item label="External relay enabled and connected to Phase 2" value="1"/>
    </Value>
    <Value genre="config" index="106" instance="1" label="External IR relay (BICOM) power threshold settings - maximum power of all phases together" max="60000" min="0" size="2" type="short" value="0">
      <Help>This parameter defines a threshold when External IR relay is being turned off. (If Parameter no. 100 is set to the value 1 or 2)</Help>
    </Value>
    <Value genre="config" index="107" instance="1" label="External relay (IKA) power threshold settings - maximum power on phase L2" max="20000" min="0" size="2" type="short" value="0">
      <Help>This parameter defines a threshold when External relay is being turned off (if the parameter no. 100 is set to the value 1 or 2).</Help>
    </Value>
    <Value genre="config" index="112" instance="1" label="Power threshold - Delay before power on" max="32535" min="0" size="2" type="short" value="0">
      <Help>External IR relay/ External relay is turned off due to detected overload (as set by parameter 106 and 107) and remains off for a time, defined in this parameter. After that time, the output turns on to check, if the overload is still present.</Help>
    </Value>
  </CommandClass>
  <!-- Association Groups -->
  <CommandClass id="133">
    <Associations num_groups="1">
      <Group index="1" label="Lifeline" max_associations="1"/>
    </Associations>
  </CommandClass>
  <CommandClass id="142">
    <Compatibility>
      <ForceInstances>true</ForceInstances>
    </Compatibility>
  </CommandClass>
  <!-- Remove COMMAND_CLASS_BASIC -->
  <CommandClass action="remove" id="32"/>
  <!-- Map endpoints to instances -->
  <CommandClass id="96">
    <Compatibility>
      <MapRootToEndpoint>true</MapRootToEndpoint>
    </Compatibility>
  </CommandClass>
</Product>
