#!/usr/bin/env perl

# Copyright (C) 2007-2019 Ole Tange and Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <http://www.gnu.org/licenses/>
# or write to the Free Software Foundation, Inc., 51 Franklin St,
# Fifth Floor, Boston, MA 02110-1301 USA

# open3 used in Job::start
use IPC::Open3;
use POSIX;
# gensym used in Job::start
use Symbol qw(gensym);
# tempfile used in Job::start
use File::Temp qw(tempfile tempdir);
# mkpath used in openresultsfile
use File::Path;
# GetOptions used in get_options_from_array
use Getopt::Long;
# Used to ensure code quality
use strict;
use File::Basename;

sub set_input_source_header($$) {
    my ($command_ref,$input_source_fh_ref) = @_;
    if($opt::header and not $opt::pipe) {
	# split with colsep or \t
	# $header force $colsep = \t if undef?
	my $delimiter = defined $opt::colsep ? $opt::colsep : "\t";
	# regexp for {=
	my $left = "\Q$Global::parensleft\E";
	my $l = $Global::parensleft;
	# regexp for =}
	my $right = "\Q$Global::parensright\E";
	my $r = $Global::parensright;
	my $id = 1;
	for my $fh (@$input_source_fh_ref) {
	    my $line = <$fh>;
	    chomp($line);
	    $line =~ s/\r$//;
	    ::debug("init", "Delimiter: '$delimiter'");
	    for my $s (split /$delimiter/o, $line) {
		::debug("init", "Colname: '$s'");
		# Replace {colname} with {2}
		for(@$command_ref, @Global::ret_files,
		    @Global::transfer_files, $opt::tagstring,
		    $opt::workdir, $opt::results, $opt::retries) {
		    # Skip if undefined
		    $_ or next;
		  s:\{$s(|/|//|\.|/\.)\}:\{$id$1\}:g;
		    # {=header1 ... =}  =>  {=1 ... =}
		  s:$left $s (.*?) $right:$l$id$1$r:gx;
		}
		$Global::input_source_header{$id} = $s;
		$id++;
	    }
	}
    } else {
	my $id = 1;
	for my $fh (@$input_source_fh_ref) {
	    $Global::input_source_header{$id} = $id;
	    $id++;
	}
    }
}

sub max_jobs_running() {
    # Compute $Global::max_jobs_running as the max number of jobs
    # running on each sshlogin.
    # Returns:
    #   $Global::max_jobs_running
    if(not $Global::max_jobs_running) {
	for my $sshlogin (values %Global::host) {
	    $sshlogin->max_jobs_running();
	}
    }
    if(not $Global::max_jobs_running) {
	::error("Cannot run any jobs.");
	wait_and_exit(255);
    }
    return $Global::max_jobs_running;
}

sub halt() {
    # Compute exit value,
    # wait for children to complete
    # and exit
    if($opt::halt and $Global::halt_when ne "never") {
	if(not defined $Global::halt_exitstatus) {
	    if($Global::halt_pct) {
		$Global::halt_exitstatus =
		    ::ceil($Global::total_failed /
			   ($Global::total_started || 1) * 100);
	    } elsif($Global::halt_count) {
		$Global::halt_exitstatus =
		    ::min(undef_as_zero($Global::total_failed),101);
	    }
	}
	wait_and_exit($Global::halt_exitstatus);
    } else {
	wait_and_exit(min(undef_as_zero($Global::exitstatus),101));
    }
}


sub __PIPE_MODE__() {}


sub pipepart_setup() {
    # Compute the blocksize
    # Generate the commands to extract the blocks
    # Push the commands on queue
    # Changes:
    #   @Global::cat_prepends
    #   $Global::JobQueue
    if($opt::tee) {
	# Prepend each command with
	#   < file
	my $cat_string = "< ".Q($opt::a[0]);
	for(1..$Global::JobQueue->total_jobs()) {
	    push @Global::cat_appends, $cat_string;
	    push @Global::cat_prepends, "";
	}
    } else {
	if(not $opt::blocksize) {
	    # --blocksize with 10 jobs per jobslot
	    $opt::blocksize = -10;
	}
	if($opt::roundrobin) {
	    # --blocksize with 1 job per jobslot
	    $opt::blocksize = -1;
	}
	if($opt::blocksize < 0) {
	    my $size = 0;
	    # Compute size of -a
	    for(@opt::a) {
		if(-f $_) {
		    $size += -s $_;
		} elsif(-b $_) {
		    $size += size_of_block_dev($_);
		} elsif(-e $_) {
		    ::error("$_ is neither a file nor a block device");
		    wait_and_exit(255);
		} else {
		    ::error("File not found: $_");
		    wait_and_exit(255);
		}
	    }
	    # Run in total $job_slots*(- $blocksize) jobs
	    # Set --blocksize = size / no of proc / (- $blocksize)
	    $Global::dummy_jobs = 1;
	    $Global::blocksize = 1 +
		int($size / max_jobs_running() /
		    -multiply_binary_prefix($opt::blocksize));
	}
	@Global::cat_prepends = map { pipe_part_files($_) } @opt::a;
	# Unget the empty arg as many times as there are parts
	$Global::JobQueue->{'commandlinequeue'}{'arg_queue'}->unget(
	    map { [Arg->new("\0noarg")] } @Global::cat_prepends
	    );
    }
}

sub pipe_tee_setup() {
    # Create temporary fifos
    # Run 'tee fifo1 fifo2 fifo3 ... fifoN' in the background
    # This will spread the input to fifos
    # Generate commands that reads from fifo1..N:
    #   cat fifo | user_command
    # Changes:
    #   @Global::cat_prepends
    my @fifos;
    for(1..$Global::JobQueue->total_jobs()) {
	push @fifos, tmpfifo();
    }
    # cat foo | tee fifo1 fifo2 fifo3 fifo4 fifo5 > /dev/null
    if(not fork()){
	# Test if tee supports --output-error=warn-nopipe
	`echo | tee --output-error=warn-nopipe /dev/null >/dev/null 2>/dev/null`;
	my $opt = $? ? "" : "--output-error=warn-nopipe";
	::debug("init","tee $opt");
	# Let tee inherit our stdin
	# and redirect stdout to null
	open STDOUT, ">","/dev/null";
	if($opt) {
	    exec "tee", $opt, @fifos;
	} else {
	    exec "tee", @fifos;
	}
    }
    # For each fifo
    #   (rm fifo1; grep 1) < fifo1
    #   (rm fifo2; grep 2) < fifo2
    #   (rm fifo3; grep 3) < fifo3
    # Remove the tmpfifo as soon as it is open
    @Global::cat_prepends = map { "(rm $_;" } @fifos;
    @Global::cat_appends = map { ") < $_" } @fifos;
}


sub parcat_script() {
    # TODO if script fails: Use parallel -j0 --plain --lb cat ::: fifos
    my $script = q'{
	use POSIX qw(:errno_h);
	use IO::Select;
	use strict;
	use threads;
	use Thread::Queue;
	use Fcntl qw(:DEFAULT :flock);

	my $opened :shared;
	my $q = Thread::Queue->new();
	my $okq = Thread::Queue->new();
	my @producers;

	if(not @ARGV) {
	    if(-t *STDIN) {
		print "Usage:\n";
		print "  parcat file(s)\n";
		print "  cat argfile | parcat\n";
	    } else {
		# Read arguments from stdin
		chomp(@ARGV = <STDIN>);
	    }
	}
	my $files_to_open = 0;
	# Default: fd = stdout
	my $fd = 1;
	for (@ARGV) {
	    # --rm = remove file when opened
	    /^--rm$/ and do { $opt::rm = 1; next; };
	    # -1 = output to fd 1, -2 = output to fd 2
	    /^-(\d+)$/ and do { $fd = $1; next; };
	    push @producers, threads->create("producer", $_, $fd);
	    $files_to_open++;
	}

	sub producer {
	    # Open a file/fifo, set non blocking, enqueue fileno of the file handle
	    my $file = shift;
	    my $output_fd = shift;
	    open(my $fh, "<", $file) || do {
		print STDERR "parcat: Cannot open $file\n";
		exit(1);
	    };
	    # Remove file when it has been opened
	    if($opt::rm) {
		unlink $file;
	    }
	    set_fh_non_blocking($fh);
	    $opened++;
	    # Pass the fileno to parent
	    $q->enqueue(fileno($fh),$output_fd);
	    # Get an OK that the $fh is opened and we can release the $fh
	    while(1) {
		my $ok = $okq->dequeue();
		if($ok == fileno($fh)) { last; }
		# Not ours - very unlikely to happen
		$okq->enqueue($ok);
	    }
	    return;
	}

	my $s = IO::Select->new();
	my %buffer;

	sub add_file {
	    my $infd = shift;
	    my $outfd = shift;
	    open(my $infh, "<&=", $infd) || die;
	    open(my $outfh, ">&=", $outfd) || die;
	    $s->add($infh);
	    # Tell the producer now opened here and can be released
	    $okq->enqueue($infd);
	    # Initialize the buffer
	    @{$buffer{$infh}{$outfd}} = ();
	    $Global::fh{$outfd} = $outfh;
	}

	sub add_files {
	    # Non-blocking dequeue
	    my ($infd,$outfd);
	    do {
		($infd,$outfd) = $q->dequeue_nb(2);
		if(defined($outfd)) {
		    add_file($infd,$outfd);
		}
	    } while(defined($outfd));
	}

	sub add_files_block {
	    # Blocking dequeue
	    my ($infd,$outfd) = $q->dequeue(2);
	    add_file($infd,$outfd);
	}


	my $fd;
	my (@ready,$infh,$rv,$buf);
	do {
	    # Wait until at least one file is opened
	    add_files_block();
	    while($q->pending or keys %buffer) {
		add_files();
		while(keys %buffer) {
		    @ready = $s->can_read(0.01);
		    if(not @ready) {
			add_files();
		    }
		    for $infh (@ready) {
			# There is only one key, namely the output file descriptor
			for my $outfd (keys %{$buffer{$infh}}) {
			    $rv = sysread($infh, $buf, 65536);
			    if (!$rv) {
				if($! == EAGAIN) {
				    # Would block: Nothing read
				    next;
				} else {
				    # Nothing read, but would not block:
				    # This file is done
				    $s->remove($infh);
				    for(@{$buffer{$infh}{$outfd}}) {
					syswrite($Global::fh{$outfd},$_);
				    }
				    delete $buffer{$infh};
				    # Closing the $infh causes it to block
				    # close $infh;
				    add_files();
				    next;
				}
			    }
			    # Something read.
			    # Find \n or \r for full line
			    my $i = (rindex($buf,"\n")+1);
			    if($i) {
				# Print full line
				for(@{$buffer{$infh}{$outfd}}, substr($buf,0,$i)) {
				    syswrite($Global::fh{$outfd},$_);
				}
				# @buffer = remaining half line
				$buffer{$infh}{$outfd} = [substr($buf,$i,$rv-$i)];
			    } else {
				# Something read, but not a full line
				push @{$buffer{$infh}{$outfd}}, $buf;
			    }
			    redo;
			}
		    }
		}
	    }
	} while($opened < $files_to_open);

	for (@producers) {
	    $_->join();
	}

	sub set_fh_non_blocking {
	    # Set filehandle as non-blocking
	    # Inputs:
	    #   $fh = filehandle to be blocking
	    # Returns:
	    #   N/A
	    my $fh = shift;
	    my $flags;
	    fcntl($fh, &F_GETFL, $flags) || die $!; # Get the current flags on the filehandle
	    $flags |= &O_NONBLOCK; # Add non-blocking to the flags
	    fcntl($fh, &F_SETFL, $flags) || die $!; # Set the flags on the filehandle
	}
    }';
    return ::spacefree(3, $script);
}

sub sharder_script() {
    my $script = q{
	use B;
	# Column separator
	my $sep = shift;
	# Which columns to shard on (count from 1)
	my $col = shift;
	# Which columns to shard on (count from 0)
	my $col0 = $col - 1;
	# Perl expression
	my $perlexpr = shift;
	my $bins = @ARGV;
	# Open fifos for writing, fh{0..$bins}
	my $t = 0;
	my %fh;
	for(@ARGV) {
	    open $fh{$t++}, ">", $_;
	    # open blocks until it is opened by reader
	    # so unlink only happens when it is ready
	    unlink $_;
	}
        if($perlexpr) {
	    my $subref = eval("sub { no strict; no warnings; $perlexpr }");
	    while(<STDIN>) {
		# Split into $col columns (no need to split into more)
		@F = split $sep, $_, $col+1;
		{
		    local $_ = $F[$col0];
		    &$subref();
		    $fh = $fh{ hex(B::hash($_))%$bins };
		}
		print $fh $_;
	    }
	} else {
	    while(<STDIN>) {
		# Split into $col columns (no need to split into more)
		@F = split $sep, $_, $col+1;
		$fh = $fh{ hex(B::hash($F[$col0]))%$bins };
		print $fh $_;
	    }
	}
	# Close all open fifos
	close values %fh;
    };
    return ::spacefree(1, $script);
}

sub binner_script() {
    my $script = q{
	use B;
	# Column separator
	my $sep = shift;
	# Which columns to shard on (count from 1)
	my $col = shift;
	# Which columns to shard on (count from 0)
	my $col0 = $col - 1;
	# Perl expression
	my $perlexpr = shift;
	my $bins = @ARGV;
	# Open fifos for writing, fh{0..$bins}
	my $t = 0;
	my %fh;
        # Let the last output fifo be the 0'th
        open $fh{$t++}, ">", pop @ARGV;
	for(@ARGV) {
	    open $fh{$t++}, ">", $_;
	    # open blocks until it is opened by reader
	    # so unlink only happens when it is ready
	    unlink $_;
	}
        if($perlexpr) {
	    my $subref = eval("sub { no strict; no warnings; $perlexpr }");
	    while(<STDIN>) {
		# Split into $col columns (no need to split into more)
		@F = split $sep, $_, $col+1;
		{
		    local $_ = $F[$col0];
		    &$subref();
		    $fh = $fh{ $_%$bins };
		}
		print $fh $_;
	    }
	} else {
	    while(<STDIN>) {
		# Split into $col columns (no need to split into more)
		@F = split $sep, $_, $col+1;
		$fh = $fh{ $F[$col0]%$bins };
		print $fh $_;
	    }
	}
	# Close all open fifos
	close values %fh;
    };
    return ::spacefree(1, $script);
}

sub pipe_shard_setup() {
    # Create temporary fifos
    # Run 'shard.pl sep col fifo1 fifo2 fifo3 ... fifoN' in the background
    # This will spread the input to fifos
    # Generate commands that reads from fifo1..N:
    #   cat fifo | user_command
    # Changes:
    #   @Global::cat_prepends
    my @shardfifos;
    my @parcatfifos;
    # TODO $opt::jobs should be evaluated (100%)
    # TODO $opt::jobs should be number of total_jobs if there are argugemts
    my $njobs = $opt::jobs;
    for my $m (0..$njobs-1) {
	for my $n (0..$njobs-1) {
	    # sharding to A B C D
	    # parcatting all As together
	    $parcatfifos[$n][$m] = $shardfifos[$m][$n] = tmpfifo();
	}
    }
    my $shardbin = ($opt::shard || $opt::bin);
    my $script;
    if($opt::bin) {
	$script = binner_script();
    } else {
	$script = sharder_script();
    }

    # cat foo | sharder sep col fifo1 fifo2 fifo3 ... fifoN

    if($shardbin =~ /^[a-z_][a-z_0-9]*(\s|$)/i) {
	# Group by column name
	# (Yes, this will also wrongly match a perlexpr like: chop)
	my($read,$char,@line);
	# A full line, but nothing more (the rest must be read by the child)
	# $Global::header used to prepend block to each job
        do {
	    $read = sysread(STDIN,$char,1);
	    push @line, $char;
	} while($read and $char ne "\n");
	$Global::header = join "", @line;
    }
    my ($col, $perlexpr, $subref) =
	column_perlexpr($shardbin, $Global::header, $opt::colsep);
    if(not fork()) {
	# Let the sharder inherit our stdin
	# and redirect stdout to null
	open STDOUT, ">","/dev/null";
	# The PERL_HASH_SEED must be the same for all sharders
	# so B::hash will return the same value for any given input
	$ENV{'PERL_HASH_SEED'} = $$;
	exec qw(parallel --block 100k -q --pipe -j), $njobs,
	    qw(--roundrobin -u perl -e), $script, ($opt::colsep || ","),
	    $col, $perlexpr, '{}', (map { (':::+', @{$_}) } @parcatfifos);
    }
    # For each fifo
    #   (rm fifo1; grep 1) < fifo1
    #   (rm fifo2; grep 2) < fifo2
    #   (rm fifo3; grep 3) < fifo3
    my $parcat = Q(parcat_script());
    if(not $parcat) {
	::error("'parcat' must be in path.");
	::wait_and_exit(255);
    }
    @Global::cat_prepends = map { "perl -e $parcat @$_ | " } @parcatfifos;
}

sub pipe_part_files(@) {
    # Given the bigfile
    # find header and split positions
    # make commands that 'cat's the partial file
    # Input:
    #   $file = the file to read
    # Returns:
    #   @commands that will cat_partial each part
    my ($file) = @_;
    my $buf = "";
    if(not -f $file and not -b $file) {
	::error("$file is not a seekable file.");
	::wait_and_exit(255);
    }
    my $header = find_header(\$buf,open_or_exit($file));
    # find positions
    my @pos = find_split_positions($file,$Global::blocksize,$header);
    # Make @cat_prepends
    my @cat_prepends = ();
    for(my $i=0; $i<$#pos; $i++) {
	push(@cat_prepends,
	     cat_partial($file, 0, length($header), $pos[$i], $pos[$i+1]));
    }
    return @cat_prepends;
}

sub find_header($$) {
    # Compute the header based on $opt::header
    # Input:
    #   $buf_ref = reference to read-in buffer
    #   $fh = filehandle to read from
    # Uses:
    #   $opt::header
    #   $Global::blocksize
    #   $Global::header
    # Returns:
    #   $header string
    my ($buf_ref, $fh) = @_;
    my $header = "";
    # $Global::header may be set in group_by_loop()
    if($Global::header) { return $Global::header }
    if($opt::header) {
	if($opt::header eq ":") { $opt::header = "(.*\n)"; }
	# Number = number of lines
	$opt::header =~ s/^(\d+)$/"(.*\n)"x$1/e;
	while(read($fh,substr($$buf_ref,length $$buf_ref,0),
		   $Global::blocksize)) {
	    if($$buf_ref =~ s/^($opt::header)//) {
		$header = $1;
		last;
	    }
	}
    }
    return $header;
}

sub find_split_positions($$$) {
    # Find positions in bigfile where recend is followed by recstart
    # Input:
    #   $file = the file to read
    #   $block = (minimal) --block-size of each chunk
    #   $header = header to be skipped
    # Uses:
    #   $opt::recstart
    #   $opt::recend
    # Returns:
    #   @positions of block start/end
    my($file, $block, $header) = @_;
    my $headerlen = length $header;
    my $size = -s $file;
    if(-b $file) {
	# $file is a blockdevice
	$size = size_of_block_dev($file);
    }
    $block = int $block;
    if($opt::groupby) {
	return split_positions_for_group_by($file,$size,$block,$header);
    }
    # The optimal dd blocksize for mint, redhat, solaris, openbsd = 2^17..2^20
    # The optimal dd blocksize for freebsd = 2^15..2^17
    my $dd_block_size = 131072; # 2^17
    my @pos;
    my ($recstart,$recend) = recstartrecend();
    my $recendrecstart = $recend.$recstart;
    my $fh = ::open_or_exit($file);
    push(@pos,$headerlen);
    for(my $pos = $block+$headerlen; $pos < $size; $pos += $block) {
	my $buf;
	if($recendrecstart eq "") {
	    # records ends anywhere
	    push(@pos,$pos);
	} else {
	    # Seek the the block start
	    if(not seek($fh, $pos, 0)) {
		::error("Cannot seek to $pos in $file");
		edit(255);
	    }
	    while(read($fh,substr($buf,length $buf,0),$dd_block_size)) {
		if($opt::regexp) {
		    # If match /$recend$recstart/ => Record position
		    if($buf =~ m:^(.*$recend)$recstart:os) {
			# Start looking for next record _after_ this match
			$pos += length($1);
			push(@pos,$pos);
			last;
		    }
		} else {
		    # If match $recend$recstart => Record position
		    # TODO optimize to only look at the appended
		    #   $dd_block_size + len $recendrecstart
		    # TODO increase $dd_block_size to optimize for longer records
		    my $i = index64(\$buf,$recendrecstart);
		    if($i != -1) {
			# Start looking for next record _after_ this match
			$pos += $i + length($recend);
			push(@pos,$pos);
			last;
		    }
		}
	    }
	}
    }
    if($pos[$#pos] != $size) {
	# Last splitpoint was not at end of the file: add it
	push @pos, $size;
    }
    close $fh;
    return @pos;
}

sub split_positions_for_group_by($$$$) {
    my($fh);
    sub value_at($) {
	my $pos = shift;
	if($pos != 0) {
	    seek($fh, $pos-1, 0) || die;
	    # Read half line
	    <$fh>;
	}
	# Read full line
	my $linepos = tell($fh);
	$_ = <$fh>;
	if(defined $_) {
	    # Not end of file
	    my @F;
	    if(defined $group_by::col) {
		$opt::colsep ||= "\t";
		@F = split /$opt::colsep/, $_;
		$_ = $F[$group_by::col];
	    }
	    eval $group_by::perlexpr;
	}
	return ($_,$linepos);
    }

    sub binary_search_end($$$) {
	my ($s,$spos,$epos) = @_;
	# value_at($spos) == $s
	# value_at($epos) != $s
	my $posdif = $epos - $spos;
	my ($v,$vpos);
	while($posdif) {
	    ($v,$vpos) = value_at($spos+$posdif);
	    if($v eq $s) {
		$spos = $vpos;
		$posdif = $epos - $spos;
	    } else {
		$epos = $vpos;
	    }
	    $posdif = int($posdif/2);
	}
	return($v,$vpos);
    }

    sub binary_search_start($$$) {
	my ($s,$spos,$epos) = @_;
	# value_at($spos) != $s
	# value_at($epos) == $s
	my $posdif = $epos - $spos;
	my ($v,$vpos);
	while($posdif) {
	    ($v,$vpos) = value_at($spos+$posdif);
	    if($v eq $s) {
		$epos = $vpos;
	    } else {
		$spos = $vpos;
		$posdif = $epos - $spos;
	    }
	    $posdif = int($posdif/2);
	}
	return($v,$vpos);
    }

    my ($file,$size,$block,$header) = @_;
    my ($a,$b,$c,$apos,$bpos,$cpos);
    my @pos;
    $fh = open_or_exit($file);
    # Set $Global::group_by_column $Global::group_by_perlexpr
    group_by_loop($fh,$opt::recsep);
    # $xpos = linestart, $x = value at $xpos, $apos < $bpos < $cpos
    $apos = length $header;
    for(($a,$apos) = value_at($apos); $apos < $size;) {
	push @pos, $apos;
	$bpos = $apos + $block;
	($b,$bpos) = value_at($bpos);
	if(eof($fh)) {
	    push @pos, $size; last;
	}
	$cpos = $bpos + $block;
	($c,$cpos) = value_at($cpos);
	if($a eq $b) {
	    while($b eq $c) {
		# Move bpos, cpos a block forward until $a == $b != $c
		$bpos = $cpos;
		$cpos += $block;
		($c,$cpos) = value_at($cpos);
		if($cpos >= $size) {
		    $cpos = $size;
		    last;
		}
	    }
	    # $a == $b != $c
	    # Binary search for $b ending between ($bpos,$cpos)
	    ($b,$bpos) = binary_search_end($b,$bpos,$cpos);
	} else {
	    if($b eq $c) {
		# $a != $b == $c
		# Binary search for $b starting between ($apos,$bpos)
		($b,$bpos) = binary_search_start($b,$apos,$bpos);
	    } else {
		# $a != $b != $c
		# Binary search for $b ending between ($bpos,$cpos)
		($b,$bpos) = binary_search_end($b,$bpos,$cpos);
	    }
	}
	($a,$apos) = ($b,$bpos);
    }
    if($pos[$#pos] != $size) {
	# Last splitpoint was not at end of the file: add it
	push @pos, $size;
    }
    return @pos;
}

sub cat_partial($@) {
    # Efficient command to copy from byte X to byte Y
    # Input:
    #   $file = the file to read
    #   ($start, $end, [$start2, $end2, ...]) = start byte, end byte
    # Returns:
    #   Efficient command to copy $start..$end, $start2..$end2, ... to stdout
    my($file, @start_end) = @_;
    my($start, $i);
    # Convert (start,end) to (start,len)
    my @start_len = map {
	if(++$i % 2) { $start = $_; } else { $_-$start }
    } @start_end;
    # This can read 7 GB/s using a single core
    my $script = spacefree
	(0,
	 q{
	     while(@ARGV) {
		 sysseek(STDIN,shift,0) || die;
		 $left = shift;
		 while($read =
		       sysread(STDIN,$buf, $left > 131072 ? 131072 : $left)){
		     $left -= $read;
		     syswrite(STDOUT,$buf);
		 }
	     }
	 });
    return "<". Q($file) .
	" perl -e '$script' @start_len |";
}

sub column_perlexpr($$$) {
    # Compute the column number (if any), perlexpression from combined
    # string (such as --shard key, --groupby key, {=n perlexpr=}
    # Input:
    #   $column_perlexpr = string with column and perl expression
    #   $header = header from input file (if column is column name)
    #   $colsep = column separator regexp
    # Returns:
    #   $col = column number
    #   $perlexpr = perl expression
    #   $subref = compiled perl expression as sub reference
    my ($column_perlexpr, $header, $colsep) = @_;
    my ($col, $perlexpr, $subref);
    if($column_perlexpr =~ /^[-a-z0-9_]+(\s|$)/i) {
	# Column name/number (possibly prefix)
	if($column_perlexpr =~ s/^(-?\d+)(\s|$)//) {
	    # Column number (possibly prefix)
	    $col = $1;
	} elsif($column_perlexpr =~ s/^([a-z0-9_]+)(\s+|$)//i) {
	    # Column name (possibly prefix)
	    my $colname = $1;
	    # Split on --copsep pattern
	    my @headers = split /$colsep/, $header;
	    my %headers;
	    @headers{@headers} = (1..($#headers+1));
	    $col = $headers{$colname};
	    if(not defined $col) {
		::error("Column '$colname' $colsep not found in header",keys %headers);
		::wait_and_exit(255);
	    }
	}
    }
    # What is left of $column_perlexpr is $perlexpr (possibly empty)
    $perlexpr = $column_perlexpr;
    $subref = eval("sub { no strict; no warnings; $perlexpr }");
    return($col, $perlexpr, $subref);
}

sub group_by_loop($$) {
    # Generate perl code for group-by loop
    # Insert a $recsep when the column value changes
    # The column value can be computed with $perexpr
    my($fh,$recsep) = @_;
    my $groupby = $opt::groupby;
    if($groupby =~ /^[a-z_][a-z_0-9]*(\s|$)/i) {
	# Group by column name
	# (Yes, this will also wrongly match a perlexpr like: chop)
	my($read,$char,@line);
	# A full line, but nothing more (the rest must be read by the child)
	# $Global::header used to prepend block to each job
        do {
	    $read = sysread($fh,$char,1);
	    push @line, $char;
	} while($read and $char ne "\n");
	$Global::header = join "", @line;
    }
    $opt::colsep ||= "\t";
    ($group_by::col, $group_by::perlexpr, $group_by::subref) =
	column_perlexpr($groupby, $Global::header, $opt::colsep);
    # Numbered 0..n-1 due to being used by $F[n]
    if($group_by::col) { $group_by::col--; }

    my $loop = ::spacefree(0,'{
	local $_=COLVALUE;
	PERLEXPR;
	if(! defined $last) { $last = $_ }
	if(($last) ne $_) {
	    print "RECSEP";
	    $last = $_;
	}
    }');

    if(defined $group_by::col) {
	$loop =~ s/COLVALUE/\$F[$group_by::col]/g;
    } else {
	$loop =~ s/COLVALUE/\$_/g;
    }
    $loop =~ s/PERLEXPR/$group_by::perlexpr/g;
    $loop =~ s/RECSEP/$recsep/g;
    return $loop;
}

sub group_by_stdin_filter() {
    # Record separator with 119 bit random value
    $opt::recend = '';
    $opt::recstart =
	join "", map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..20);
    $opt::remove_rec_sep = 1;
    my @filter;
    push @filter, "perl";
    if($opt::groupby =~ /^[a-z0-9_]+(\s|$)/i) {
	# This is column number/name
	# Use -a (auto-split)
	push @filter, "-a";
	$opt::colsep ||= "\t";
	my $sep = $opt::colsep;
	$sep =~ s/\t/\\t/g;
	$sep =~ s/\"/\\"/g;
	push @filter, "-F$sep";
    }
    push @filter, "-pe";
    push @filter, group_by_loop(*STDIN,$opt::recstart);
    ::debug("init", "@filter\n");
    open(STDIN, '-|', @filter) || die ("Cannot start @filter");
}

sub spreadstdin() {
    # read a record
    # Spawn a job and print the record to it.
    # Uses:
    #   $Global::blocksize
    #   STDIN
    #   $opt::r
    #   $Global::max_lines
    #   $Global::max_number_of_args
    #   $opt::regexp
    #   $Global::start_no_new_jobs
    #   $opt::roundrobin
    #   %Global::running
    # Returns: N/A

    my $buf = "";
    my ($recstart,$recend) = recstartrecend();
    my $recendrecstart = $recend.$recstart;
    my $chunk_number = 1;
    my $one_time_through;
    my $two_gb = 2**31-1;
    my $blocksize = $Global::blocksize;
    my $in = *STDIN;
    my $header = find_header(\$buf,$in);
    while(1) {
      my $anything_written = 0;
      my $buflen = length $buf;
      my $readsize = ($buflen < $blocksize) ? $blocksize-$buflen : $blocksize;
      # If $buf < $blocksize, append so it is $blocksize long after reading.
      # Otherwise append a full $blocksize
      if(not read($in,substr($buf,$buflen,0),$readsize)) {
	  # End-of-file
	  $chunk_number != 1 and last;
	  # Force the while-loop once if everything was read by header reading
	  $one_time_through++ and last;
      }
      if($opt::r) {
	  # Remove empty lines
	  $buf =~ s/^\s*\n//gm;
	  if(length $buf == 0) {
	      next;
	  }
      }
      if($Global::max_lines and not $Global::max_number_of_args) {
	  # Read n-line records
	  my $n_lines = $buf =~ tr/\n/\n/;
	  my $last_newline_pos = rindex64(\$buf,"\n");
	  # Go backwards until there are full n-line records
	  while($n_lines % $Global::max_lines) {
	      $n_lines--;
	      $last_newline_pos = rindex64(\$buf,"\n",$last_newline_pos-1);
	  }
	  # Chop at $last_newline_pos as that is where n-line record ends
	  $anything_written +=
	      write_record_to_pipe($chunk_number++,\$header,\$buf,
				   $recstart,$recend,$last_newline_pos+1);
	  shorten(\$buf,$last_newline_pos+1);
      } elsif($opt::regexp) {
	  if($Global::max_number_of_args) {
	      # -N => (start..*?end){n}
	      # -L -N => (start..*?end){n*l}
	      my $read_n_lines = -1+
		  $Global::max_number_of_args * ($Global::max_lines || 1);
	      # (?!negative lookahead) is needed to avoid backtracking
	      # See: https://unix.stackexchange.com/questions/439356/
	      while($buf =~
		    /(
		    # Either recstart or at least one char from start
		    ^(?: $recstart | .)
		    # followed something
		    (?:(?!$recend$recstart).)*?
		    # and then recend
		    $recend
		    # Then n-1 times recstart.*recend
		    (?:$recstart(?:(?!$recend$recstart).)*?$recend){$read_n_lines}
		    )
		    # Followed by recstart
		    (?=$recstart)/osx) {
		  $anything_written +=
		      write_record_to_pipe($chunk_number++,\$header,\$buf,
					   $recstart,$recend,length $1);
		  shorten(\$buf,length $1);
	      }
	  } else {
	      eof($in) and last;
	      # Find the last recend-recstart in $buf
	      if($buf =~ /^(.*$recend)$recstart.*?$/os) {
		  $anything_written +=
		      write_record_to_pipe($chunk_number++,\$header,\$buf,
					   $recstart,$recend,length $1);
		  shorten(\$buf,length $1);
	      }
	  }
      } elsif($opt::csv) {
	  # Read a full CSV record
	  # even number of " + end of line
	  my $last_newline_pos = length $buf;
	  do {
	      # find last EOL
	      $last_newline_pos = rindex64(\$buf,"\n",$last_newline_pos-1);
	      # While uneven "
	  } while((substr($buf,0,$last_newline_pos) =~ y/"/"/)%2
	      and $last_newline_pos >= 0);
	  # Chop at $last_newline_pos as that is where CSV record ends
	  $anything_written +=
	      write_record_to_pipe($chunk_number++,\$header,\$buf,
				   $recstart,$recend,$last_newline_pos+1);
	  shorten(\$buf,$last_newline_pos+1);
      } else {
	  if($Global::max_number_of_args) {
	      # -N => (start..*?end){n}
	      my $i = 0;
	      my $read_n_lines =
		  $Global::max_number_of_args * ($Global::max_lines || 1);
	      while(($i = nindex(\$buf,$recendrecstart,$read_n_lines)) != -1
		    and
		    length $buf) {
		  $i += length $recend; # find the actual splitting location
		  $anything_written +=
		      write_record_to_pipe($chunk_number++,\$header,\$buf,
					   $recstart,$recend,$i);
		  shorten(\$buf,$i);
	      }
	  } else {
	      eof($in) and last;
	      # Find the last recend+recstart in $buf
	      my $i = rindex64(\$buf,$recendrecstart);
	      if($i != -1) {
		  $i += length $recend; # find the actual splitting location
		  $anything_written +=
		      write_record_to_pipe($chunk_number++,\$header,\$buf,
					   $recstart,$recend,$i);
		  shorten(\$buf,$i);
	      }
	  }
      }
      if(not $anything_written
	 and not eof($in)
	 and not $Global::no_autoexpand_block) {
	  # Nothing was written - maybe the block size < record size?
	  # Increase blocksize exponentially up to 2GB-1 (2GB causes problems)
	  if($blocksize < $two_gb) {
	      my $old_blocksize = $blocksize;
	      $blocksize = ::min(ceil($blocksize * 1.3 + 1), $two_gb);
	      ::warning("A record was longer than $old_blocksize. " .
			"Increasing to --blocksize $blocksize.");
	  }
      }
    }
    ::debug("init", "Done reading input\n");

    # If there is anything left in the buffer write it
    write_record_to_pipe($chunk_number++, \$header, \$buf, $recstart,
			 $recend, length $buf);

    if($opt::retries) {
	$Global::no_more_input = 1;
	# We need to start no more jobs: At most we need to retry some
	# of the already running.
	my @running = values %Global::running;
	# Stop any virgins.
	for my $job (@running) {
	    if(defined $job and $job->virgin()) {
		close $job->fh(0,"w");
	    }
	}
	# Wait for running jobs to be done
	my $sleep =1;
	while($Global::total_running > 0) {
	    $sleep = ::reap_usleep($sleep);
	    start_more_jobs();
	}
    }
    $Global::start_no_new_jobs ||= 1;
    if($opt::roundrobin) {
	# Flush blocks to roundrobin procs
	my $sleep = 1;
	while(%Global::running) {
	    my $something_written = 0;
	    for my $job (values %Global::running) {
		if($job->block_length()) {
		    $something_written += $job->non_blocking_write();
		} else {
		    close $job->fh(0,"w");
		}
	    }
	    if($something_written) {
		$sleep = $sleep/2+0.001;
	    }
	    $sleep = ::reap_usleep($sleep);
	}
    }
}

sub recstartrecend() {
    # Uses:
    #   $opt::recstart
    #   $opt::recend
    # Returns:
    #   $recstart,$recend with default values and regexp conversion
    my($recstart,$recend);
    if(defined($opt::recstart) and defined($opt::recend)) {
	# If both --recstart and --recend is given then both must match
	$recstart = $opt::recstart;
	$recend = $opt::recend;
    } elsif(defined($opt::recstart)) {
	# If --recstart is given it must match start of record
	$recstart = $opt::recstart;
	$recend = "";
    } elsif(defined($opt::recend)) {
	# If --recend is given then it must match end of record
	$recstart = "";
	$recend = $opt::recend;
	if($opt::regexp and $recend eq '') {
	    # --regexp --recend ''
	    $recend = '.';
	}
    }

    if($opt::regexp) {
	# If $recstart/$recend contains '|'
	# this should only apply to the regexp
	$recstart = "(?:".$recstart.")";
	$recend = "(?:".$recend.")";
    } else {
	# $recstart/$recend = printf strings (\n)
	$recstart =~ s/\\([0rnt\'\"\\])/"qq|\\$1|"/gee;
	$recend =~ s/\\([0rnt\'\"\\])/"qq|\\$1|"/gee;
    }
    return ($recstart,$recend);
}

sub nindex($$) {
    # See if string is in buffer N times
    # Returns:
    #   the position where the Nth copy is found
    my ($buf_ref, $str, $n) = @_;
    my $i = 0;
    for(1..$n) {
	$i = index64($buf_ref,$str,$i+1);
	if($i == -1) { last }
    }
    return $i;
}

{
    my @robin_queue;
    my $sleep = 1;

    sub round_robin_write($$$$$) {
	# Input:
	#   $header_ref = ref to $header string
	#   $block_ref = ref to $block to be written
	#   $recstart = record start string
	#   $recend = record end string
	#   $endpos = end position of $block
	# Uses:
	#   %Global::running
	# Returns:
	#   $something_written = amount of bytes written
	my ($header_ref,$buffer_ref,$recstart,$recend,$endpos) = @_;
	my $written = 0;
	my $block_passed = 0;
	while(not $block_passed) {
	    # Continue flushing existing buffers
	    # until one is empty and a new block is passed
	    if(@robin_queue) {
		# Rotate queue once so new blocks get a fair chance
		# to be given to another slot
		push @robin_queue, shift @robin_queue;
	    } else {
		# Make a queue to spread the blocks evenly
		push @robin_queue, (sort { $a->seq() <=> $b->seq() }
				    values %Global::running);
	    }
	    do {
		$written = 0;
		for my $job (@robin_queue) {
		    if($job->block_length() > 0) {
			$written += $job->non_blocking_write();
		    } else {
			$job->set_block($header_ref, $buffer_ref,
					$endpos, $recstart, $recend);
			$block_passed = 1;
			$job->set_virgin(0);
			$written += $job->non_blocking_write();
			last;
		    }
		}
		if($written) {
		    $sleep = $sleep/1.5+0.001;
		}
		# Don't sleep if something is written
	    } while($written and not $block_passed);
	    $sleep = ::reap_usleep($sleep);
	}
	return $written;
    }
}

sub index64($$$) {
    # Do index on strings > 2GB.
    # index in Perl < v5.22 does not work for > 2GB
    # Input:
    #   as index except STR which must be passed as a reference
    # Output:
    #   as index
    my $ref = shift;
    my $match = shift;
    my $pos = shift || 0;
    my $block_size = 2**31-1;
    my $strlen   = length($$ref);
    # No point in doing extra work if we don't need to.
    if($strlen < $block_size or $] > 5.022) {
	return index($$ref, $match, $pos);
    }

    my $matchlen = length($match);
    my $ret;
    my $offset = $pos;
    while($offset < $strlen) {
	$ret = index(
	    substr($$ref, $offset, $block_size),
	    $match, $pos-$offset);
	if($ret != -1) {
	    return $ret + $offset;
	}
	$offset += ($block_size - $matchlen - 1);
    }
    return -1;
}

sub rindex64($@) {
    # Do rindex on strings > 2GB.
    # rindex in Perl < v5.22 does not work for > 2GB
    # Input:
    #   as rindex except STR which must be passed as a reference
    # Output:
    #   as rindex
    my $ref = shift;
    my $match = shift;
    my $pos = shift;
    my $block_size = 2**31-1;
    my $strlen = length($$ref);
    # Default: search from end
    $pos = defined $pos ? $pos : $strlen;
    # No point in doing extra work if we don't need to.
    if($strlen < $block_size) {
	return rindex($$ref, $match, $pos);
    }

    my $matchlen = length($match);
    my $ret;
    my $offset = $pos - $block_size + $matchlen;
    if($offset < 0) {
	# The offset is less than a $block_size
	# Set the $offset to 0 and
	# Adjust block_size accordingly
	$block_size = $block_size + $offset;
	$offset = 0;
    }
    while($offset >= 0) {
	$ret = rindex(
	    substr($$ref, $offset, $block_size),
	    $match);
	if($ret != -1) {
	    return $ret + $offset;
	}
	$offset -= ($block_size - $matchlen - 1);
    }
    return -1;
}

sub shorten($$) {
    # Do: substr($buf,0,$i) = "";
    # Some Perl versions do not support $i > 2GB, so do this in 2GB chunks
    # Input:
    #   $buf_ref = \$buf
    #   $i = position to shorten to
    # Returns: N/A
    my ($buf_ref, $i) = @_;
    my $two_gb = 2**31-1;
    while($i > $two_gb) {
        substr($$buf_ref,0,$two_gb) = "";
        $i -= $two_gb;
    }
    substr($$buf_ref,0,$i) = "";
}

sub write_record_to_pipe($$$$$$) {
    # Fork then
    # Write record from pos 0 .. $endpos to pipe
    # Input:
    #   $chunk_number = sequence number - to see if already run
    #   $header_ref = reference to header string to prepend
    #   $buffer_ref = reference to record to write
    #   $recstart = start string of record
    #   $recend = end string of record
    #   $endpos = position in $buffer_ref where record ends
    # Uses:
    #   $Global::job_already_run
    #   $opt::roundrobin
    #   @Global::virgin_jobs
    # Returns:
    #   Number of chunks written (0 or 1)
    my ($chunk_number, $header_ref, $buffer_ref,
	$recstart, $recend, $endpos) = @_;
    if($endpos == 0) { return 0; }
    if(vec($Global::job_already_run,$chunk_number,1)) { return 1; }
    if($opt::roundrobin) {
	# Write the block to one of the already running jobs
	return round_robin_write($header_ref, $buffer_ref,
				 $recstart, $recend, $endpos);
    }
    # If no virgin found, backoff
    my $sleep = 0.0001; # 0.01 ms - better performance on highend
    while(not @Global::virgin_jobs) {
	::debug("pipe", "No virgin jobs");
	$sleep = ::reap_usleep($sleep);
	# Jobs may not be started because of loadavg
	# or too little time between each ssh login
	# or retrying failed jobs.
	start_more_jobs();
    }
    my $job = shift @Global::virgin_jobs;
    # Job is no longer virgin
    $job->set_virgin(0);

    if($opt::retries) {
	# Copy $buffer[0..$endpos] to $job->{'block'}
	# Remove rec_sep
	# Run $job->add_transfersize
	$job->set_block($header_ref, $buffer_ref, $endpos,
			$recstart, $recend);
	if(fork()) {
	    # Skip
	} else {
	    $job->write($job->block_ref());
	    close $job->fh(0,"w");
	    exit(0);
	}
    } else {
	# We ignore the removed rec_sep which is technically wrong.
	$job->add_transfersize($endpos + length $$header_ref);
	if(fork()) {
	    # Skip
	} else {
	    # Chop of at $endpos as we do not know how many rec_sep will
	    # be removed.
	    substr($$buffer_ref,$endpos,length $$buffer_ref) = "";
	    # Remove rec_sep
	    if($opt::remove_rec_sep) {
		Job::remove_rec_sep($buffer_ref, $recstart, $recend);
	    }
	    $job->write($header_ref);
	    $job->write($buffer_ref);
	    close $job->fh(0,"w");
	    exit(0);
	}
    }
    close $job->fh(0,"w");
    return 1;
}


sub __SEM_MODE__() {}


sub acquire_semaphore() {
    # Acquires semaphore. If needed: spawns to the background
    # Uses:
    #   @Global::host
    # Returns:
    #   The semaphore to be released when jobs is complete
    $Global::host{':'} = SSHLogin->new(":");
    my $sem = Semaphore->new($Semaphore::name,
			     $Global::host{':'}->max_jobs_running());
    $sem->acquire();
    if($Semaphore::fg) {
	# skip
    } else {
	if(fork()) {
	    exit(0);
	} else {
	    # If run in the background, the PID will change
	    $sem->pid_change();
	}
    }
    return $sem;
}


sub __PARSE_OPTIONS__() {}


sub options_hash() {
    # Returns:
    #   %hash = the GetOptions config
    return
	("debug|D=s" => \$opt::D,
	 "xargs" => \$opt::xargs,
	 "m" => \$opt::m,
	 "X" => \$opt::X,
	 "v" => \@opt::v,
	 "sql=s" => \$opt::retired,
	 "sqlmaster=s" => \$opt::sqlmaster,
	 "sqlworker=s" => \$opt::sqlworker,
	 "sqlandworker=s" => \$opt::sqlandworker,
	 "joblog|jl=s" => \$opt::joblog,
	 "results|result|res=s" => \$opt::results,
	 "resume" => \$opt::resume,
	 "resume-failed|resumefailed" => \$opt::resume_failed,
	 "retry-failed|retryfailed" => \$opt::retry_failed,
	 "silent" => \$opt::silent,
	 "keep-order|keeporder|k" => \$opt::keeporder,
	 "no-keep-order|nokeeporder|nok|no-k" => \$opt::nokeeporder,
	 "group" => \$opt::group,
	 "g" => \$opt::retired,
	 "ungroup|u" => \$opt::ungroup,
	 "linebuffer|linebuffered|line-buffer|line-buffered|lb"
	 => \$opt::linebuffer,
	 "tmux" => \$opt::tmux,
	 "tmuxpane" => \$opt::tmuxpane,
	 "null|0" => \$opt::null,
	 "quote|q" => \$opt::quote,
	 # Replacement strings
	 "parens=s" => \$opt::parens,
	 "rpl=s" => \@opt::rpl,
	 "plus" => \$opt::plus,
	 "I=s" => \$opt::I,
	 "extensionreplace|er=s" => \$opt::U,
	 "U=s" => \$opt::retired,
	 "basenamereplace|bnr=s" => \$opt::basenamereplace,
	 "dirnamereplace|dnr=s" => \$opt::dirnamereplace,
	 "basenameextensionreplace|bner=s" => \$opt::basenameextensionreplace,
	 "seqreplace=s" => \$opt::seqreplace,
	 "slotreplace=s" => \$opt::slotreplace,
	 "jobs|j=s" => \$opt::jobs,
	 "delay=s" => \$opt::delay,
	 "sshdelay=f" => \$opt::sshdelay,
	 "load=s" => \$opt::load,
	 "noswap" => \$opt::noswap,
	 "max-line-length-allowed" => \$opt::max_line_length_allowed,
	 "number-of-cpus" => \$opt::number_of_cpus,
	 "number-of-sockets" => \$opt::number_of_sockets,
	 "number-of-cores" => \$opt::number_of_cores,
	 "number-of-threads" => \$opt::number_of_threads,
	 "use-sockets-instead-of-threads"
	 => \$opt::use_sockets_instead_of_threads,
	 "use-cores-instead-of-threads"
	 => \$opt::use_cores_instead_of_threads,
	 "use-cpus-instead-of-cores" => \$opt::use_cpus_instead_of_cores,
	 "shellquote|shell_quote|shell-quote" => \@opt::shellquote,
	 "nice=i" => \$opt::nice,
	 "tag" => \$opt::tag,
	 "tagstring|tag-string=s" => \$opt::tagstring,
	 "onall" => \$opt::onall,
	 "nonall" => \$opt::nonall,
	 "filter-hosts|filterhosts|filter-host" => \$opt::filter_hosts,
	 "sshlogin|S=s" => \@opt::sshlogin,
	 "sshloginfile|slf=s" => \@opt::sshloginfile,
	 "controlmaster|M" => \$opt::controlmaster,
	 "ssh=s" => \$opt::ssh,
	 "transfer-file|transferfile|transfer-files|transferfiles|tf=s"
	 => \@opt::transfer_files,
	 "return=s" => \@opt::return,
	 "trc=s" => \@opt::trc,
	 "transfer" => \$opt::transfer,
	 "cleanup" => \$opt::cleanup,
	 "basefile|bf=s" => \@opt::basefile,
	 "B=s" => \$opt::retired,
	 "ctrlc|ctrl-c" => \$opt::retired,
	 "noctrlc|no-ctrlc|no-ctrl-c" => \$opt::retired,
	 "workdir|work-dir|wd=s" => \$opt::workdir,
	 "W=s" => \$opt::retired,
	 "rsync-opts|rsyncopts=s" => \$opt::rsync_opts,
	 "tmpdir|tempdir=s" => \$opt::tmpdir,
	 "use-compress-program|compress-program=s" => \$opt::compress_program,
	 "use-decompress-program|decompress-program=s"
	 => \$opt::decompress_program,
	 "compress" => \$opt::compress,
	 "tty" => \$opt::tty,
	 "T" => \$opt::retired,
	 "H=i" => \$opt::retired,
	 "dry-run|dryrun|dr" => \$opt::dryrun,
	 "progress" => \$opt::progress,
	 "eta" => \$opt::eta,
	 "bar" => \$opt::bar,
	 "shuf" => \$opt::shuf,
	 "arg-sep|argsep=s" => \$opt::arg_sep,
	 "arg-file-sep|argfilesep=s" => \$opt::arg_file_sep,
	 "trim=s" => \$opt::trim,
	 "env=s" => \@opt::env,
	 "recordenv|record-env" => \$opt::record_env,
	 "session" => \$opt::session,
	 "plain" => \$opt::plain,
	 "profile|J=s" => \@opt::profile,
	 "pipe|spreadstdin" => \$opt::pipe,
	 "robin|round-robin|roundrobin" => \$opt::roundrobin,
	 "recstart=s" => \$opt::recstart,
	 "recend=s" => \$opt::recend,
	 "regexp|regex" => \$opt::regexp,
	 "remove-rec-sep|removerecsep|rrs" => \$opt::remove_rec_sep,
	 "files|output-as-files|outputasfiles" => \$opt::files,
	 "block|block-size|blocksize=s" => \$opt::blocksize,
	 "tollef" => \$opt::tollef,
	 "gnu" => \$opt::gnu,
	 "link|xapply" => \$opt::link,
	 "linkinputsource|xapplyinputsource=i" => \@opt::linkinputsource,
	 "bibtex|citation" => \$opt::citation,
	 "wc|willcite|will-cite|nn|nonotice|no-notice" => \$opt::willcite,
	 # Termination and retries
	 "halt-on-error|halt=s" => \$opt::halt,
	 "limit=s" => \$opt::limit,
	 "memfree=s" => \$opt::memfree,
	 "retries=s" => \$opt::retries,
	 "timeout=s" => \$opt::timeout,
	 "termseq|term-seq=s" => \$opt::termseq,
	 # xargs-compatibility - implemented, man, testsuite
	 "max-procs|P=s" => \$opt::jobs,
	 "delimiter|d=s" => \$opt::d,
	 "max-chars|s=i" => \$opt::max_chars,
	 "arg-file|a=s" => \@opt::a,
	 "no-run-if-empty|r" => \$opt::r,
	 "replace|i:s" => \$opt::i,
	 "E=s" => \$opt::eof,
	 "eof|e:s" => \$opt::eof,
	 "max-args|maxargs|n=i" => \$opt::max_args,
	 "max-replace-args|N=i" => \$opt::max_replace_args,
	 "colsep|col-sep|C=s" => \$opt::colsep,
	 "csv"=> \$opt::csv,
	 "help|h" => \$opt::help,
	 "L=f" => \$opt::L,
	 "max-lines|l:f" => \$opt::max_lines,
	 "interactive|p" => \$opt::interactive,
	 "verbose|t" => \$opt::verbose,
	 "version|V" => \$opt::version,
	 "minversion|min-version=i" => \$opt::minversion,
	 "show-limits|showlimits" => \$opt::show_limits,
	 "exit|x" => \$opt::x,
	 # Semaphore
	 "semaphore" => \$opt::semaphore,
	 "semaphoretimeout|st=i" => \$opt::semaphoretimeout,
	 "semaphorename|id=s" => \$opt::semaphorename,
	 "fg" => \$opt::fg,
	 "bg" => \$opt::bg,
	 "wait" => \$opt::wait,
	 # Shebang #!/usr/bin/parallel --shebang
	 "shebang|hashbang" => \$opt::shebang,
	 "internal-pipe-means-argfiles"
	 => \$opt::internal_pipe_means_argfiles,
	 "Y" => \$opt::retired,
         "skip-first-line" => \$opt::skip_first_line,
	 "bug" => \$opt::bug,
	 "header=s" => \$opt::header,
	 "cat" => \$opt::cat,
	 "fifo" => \$opt::fifo,
	 "pipepart|pipe-part" => \$opt::pipepart,
	 "tee" => \$opt::tee,
	 "shard=s" => \$opt::shard,
	 "bin=s" => \$opt::bin,
	 "groupby|group-by=s" => \$opt::groupby,
	 "hgrp|hostgrp|hostgroup|hostgroups" => \$opt::hostgroups,
	 "embed" => \$opt::embed,
	);
}

sub get_options_from_array($@) {
    # Run GetOptions on @array
    # Input:
    #   $array_ref = ref to @ARGV to parse
    #   @keep_only = Keep only these options
    # Uses:
    #   @ARGV
    # Returns:
    #   true if parsing worked
    #   false if parsing failed
    #   @$array_ref is changed
    my ($array_ref, @keep_only) = @_;
    if(not @$array_ref) {
	# Empty array: No need to look more at that
	return 1;
    }
    # A bit of shuffling of @ARGV needed as GetOptionsFromArray is not
    # supported everywhere
    my @save_argv;
    my $this_is_ARGV = (\@::ARGV == $array_ref);
    if(not $this_is_ARGV) {
	@save_argv = @::ARGV;
	@::ARGV = @{$array_ref};
    }
    # If @keep_only set: Ignore all values except @keep_only
    my %options = options_hash();
    if(@keep_only) {
	my (%keep,@dummy);
	@keep{@keep_only} = @keep_only;
	for my $k (grep { not $keep{$_} } keys %options) {
	    # Store the value of the option in @dummy
	    $options{$k} = \@dummy;
	}
    }
    my $retval = GetOptions(%options);
    if(not $this_is_ARGV) {
	@{$array_ref} = @::ARGV;
	@::ARGV = @save_argv;
    }
    return $retval;
}

sub parse_options(@) {
    # Returns: N/A
    init_globals();
    my @argv_before = @ARGV;
    @ARGV = read_options();

    # no-* overrides *
    if($opt::nokeeporder) { $opt::keeporder = undef; }

    if(@opt::v) { $Global::verbose = $#opt::v+1; } # Convert -v -v to v=2
    if($opt::bug) { ::die_bug("test-bug"); }
    $Global::debug = $opt::D;
    $Global::shell = $ENV{'PARALLEL_SHELL'} || parent_shell($$)
	|| $ENV{'SHELL'} || "/bin/sh";
    if(not -x $Global::shell and not which($Global::shell)) {
	::error("Shell '$Global::shell' not found.");
	wait_and_exit(255);
    }
    ::debug("init","Global::shell $Global::shell\n");
    $Global::cshell = $Global::shell =~ m:(/[-a-z]*)?csh:;
    if(defined $opt::X) { $Global::ContextReplace = 1; }
    if(defined $opt::silent) { $Global::verbose = 0; }
    if(defined $opt::null) { $/ = "\0"; }
    if(defined $opt::d) { $/ = unquote_printf($opt::d) }
    parse_replacement_string_options();
    if(defined $opt::tagstring) {
	$opt::tagstring = unquote_printf($opt::tagstring);
	if($opt::tagstring =~ /\Q$Global::parensleft\E.*\Q$Global::parensright\E/
	   and
	   $opt::linebuffer) {
	    # --tagstring contains {= =} and --linebuffer =>
	    #   recompute replacement string for each use (do not cache)
	    $Global::cache_replacement_eval = 0;
	}
    }
    if(defined $opt::interactive) { $Global::interactive = $opt::interactive; }
    if(defined $opt::quote) { $Global::quoting = 1; }
    if(defined $opt::r) { $Global::ignore_empty = 1; }
    if(defined $opt::verbose) { $Global::stderr_verbose = 1; }
    if(defined $opt::eof) { $Global::end_of_file_string = $opt::eof; }
    if(defined $opt::max_args) {
	$Global::max_number_of_args = $opt::max_args;
    }
    if(defined $opt::timeout) {
	$Global::timeoutq = TimeoutQueue->new($opt::timeout);
    }
    if(defined $opt::tmpdir) { $ENV{'TMPDIR'} = $opt::tmpdir; }
    $ENV{'PARALLEL_RSYNC_OPTS'} = $opt::rsync_opts ||
	$ENV{'PARALLEL_RSYNC_OPTS'} || '-rlDzR';
    # Default: Same nice level as Parallel is started at
    $opt::nice ||= eval { getpriority(0,0) } || 0;
    if(defined $opt::help) { usage(); exit(0); }
    if(defined $opt::embed) { embed(); exit(0); }
    if(defined $opt::sqlandworker) {
	$opt::sqlmaster = $opt::sqlworker = $opt::sqlandworker;
    }
    if(defined $opt::tmuxpane) { $opt::tmux = $opt::tmuxpane; }
    if(defined $opt::colsep) { $Global::trim = 'lr'; }
    if(defined $opt::csv) {
	$Global::use{"Text::CSV"} ||= eval "use Text::CSV; 1;";
	$opt::colsep = defined $opt::colsep ? $opt::colsep : ",";
	my $csv_setting = { binary => 1, sep_char => $opt::colsep };
	my $sep = $csv_setting->{sep_char};
	$Global::csv = Text::CSV->new($csv_setting)
	    or die "Cannot use CSV: ".Text::CSV->error_diag ();
    }
    if(defined $opt::header) {
	$opt::colsep = defined $opt::colsep ? $opt::colsep : "\t";
    }
    if(defined $opt::trim) { $Global::trim = $opt::trim; }
    if(defined $opt::arg_sep) { $Global::arg_sep = $opt::arg_sep; }
    if(defined $opt::arg_file_sep) {
	$Global::arg_file_sep = $opt::arg_file_sep;
    }
    if(defined $opt::number_of_sockets) {
	print SSHLogin::no_of_sockets(),"\n"; wait_and_exit(0);
    }
    if(defined $opt::number_of_cpus) {
	print SSHLogin::no_of_cores(),"\n"; wait_and_exit(0);
    }
    if(defined $opt::number_of_cores) {
        print SSHLogin::no_of_cores(),"\n"; wait_and_exit(0);
    }
    if(defined $opt::number_of_threads) {
        print SSHLogin::no_of_threads(),"\n"; wait_and_exit(0);
    }
    if(defined $opt::max_line_length_allowed) {
        print Limits::Command::real_max_length(),"\n"; wait_and_exit(0);
    }
    if(defined $opt::version) { version(); wait_and_exit(0); }
    if(defined $opt::record_env) { record_env(); wait_and_exit(0); }
    if(defined $opt::show_limits) { show_limits(); }
    if(@opt::sshlogin) { @Global::sshlogin = @opt::sshlogin; }
    if(@opt::sshloginfile) { read_sshloginfiles(@opt::sshloginfile); }
    if(@opt::return) { push @Global::ret_files, @opt::return; }
    if($opt::transfer) {
	push @Global::transfer_files, $opt::i || $opt::I || "{}";
    }
    push @Global::transfer_files, @opt::transfer_files;
    if(not defined $opt::recstart and
       not defined $opt::recend) { $opt::recend = "\n"; }
    $Global::blocksize = multiply_binary_prefix($opt::blocksize || "1M");
    if($Global::blocksize > 2**31-1 and not $opt::pipepart) {
	warning("--blocksize >= 2G causes problems. Using 2G-1.");
	$Global::blocksize = 2**31-1;
    }
    if($^O eq "cygwin" and
       ($opt::pipe or $opt::pipepart or $opt::roundrobin)
       and $Global::blocksize > 65535) {
	warning("--blocksize >= 64K causes problems on Cygwin.");
    }
    $opt::memfree = multiply_binary_prefix($opt::memfree);
    check_invalid_option_combinations();
    if((defined $opt::fifo or defined $opt::cat)
       and not $opt::pipepart) {
	$opt::pipe = 1;
    }
    if(defined $opt::minversion) {
	print $Global::version,"\n";
	if($Global::version < $opt::minversion) {
	    wait_and_exit(255);
	} else {
	    wait_and_exit(0);
	}
    }
    if(not defined $opt::delay) {
	# Set --delay to --sshdelay if not set
	$opt::delay = $opt::sshdelay;
    }
    $opt::delay = multiply_time_units($opt::delay);
    if($opt::compress_program) {
	$opt::compress = 1;
	$opt::decompress_program ||= $opt::compress_program." -dc";
    }

    if(defined $opt::results) {
	# Is the output a dir or CSV-file?
	if($opt::results =~ /\.csv$/i) {
	    # CSV with , as separator
	    $Global::csvsep = ",";
	    $Global::membuffer ||= 1;
	} elsif($opt::results =~ /\.tsv$/i) {
	    # CSV with TAB as separator
	    $Global::csvsep = "\t";
	    $Global::membuffer ||= 1;
	}
    }
    if($opt::compress) {
	my ($compress, $decompress) = find_compression_program();
	$opt::compress_program ||= $compress;
	$opt::decompress_program ||= $decompress;
	if(($opt::results and not $Global::csvsep) or $opt::files) {
	    # No need for decompressing
	    $opt::decompress_program = "cat >/dev/null";
	}
    }
    if(defined $opt::dryrun) {
	# Force grouping due to bug #51039: --dry-run --timeout 3600 -u breaks
	$opt::ungroup = 0;
	$opt::group = 1;
    }
    if(defined $opt::nonall) {
	# Append a dummy empty argument if there are no arguments
	# on the command line to avoid reading from STDIN.
	# arg_sep = random 50 char
	# \0noarg => nothing (not the empty string)
	$Global::arg_sep = join "",
	map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..50);
	push @ARGV, $Global::arg_sep, "\0noarg";
    }
    if(defined $opt::tee) {
	if(not defined $opt::jobs) {
	    $opt::jobs = 0;
	}
    }
    if(defined $opt::tty) {
        # Defaults for --tty: -j1 -u
        # Can be overridden with -jXXX -g
        if(not defined $opt::jobs) {
            $opt::jobs = 1;
        }
        if(not defined $opt::group) {
            $opt::ungroup = 1;
        }
    }
    if(@opt::trc) {
        push @Global::ret_files, @opt::trc;
	if(not @Global::transfer_files) {
	    # Defaults to --transferfile {}
	    push @Global::transfer_files, $opt::i || $opt::I || "{}";
	}
        $opt::cleanup = 1;
    }
    if(defined $opt::max_lines) {
	if($opt::max_lines eq "-0") {
	    # -l -0 (swallowed -0)
	    $opt::max_lines = 1;
	    $opt::null = 1;
	    $/ = "\0";
	} elsif ($opt::max_lines == 0) {
	    # If not given (or if 0 is given) => 1
	    $opt::max_lines = 1;
	}
	$Global::max_lines = $opt::max_lines;
	if(not $opt::pipe) {
	    # --pipe -L means length of record - not max_number_of_args
	    $Global::max_number_of_args ||= $Global::max_lines;
	}
    }

    # Read more than one arg at a time (-L, -N)
    if(defined $opt::L) {
	$Global::max_lines = $opt::L;
	if(not $opt::pipe) {
	    # --pipe -L means length of record - not max_number_of_args
	    $Global::max_number_of_args ||= $Global::max_lines;
	}
    }
    if(defined $opt::max_replace_args) {
	$Global::max_number_of_args = $opt::max_replace_args;
	$Global::ContextReplace = 1;
    }
    if((defined $opt::L or defined $opt::max_replace_args)
       and
       not ($opt::xargs or $opt::m)) {
	$Global::ContextReplace = 1;
    }
    if(defined $opt::tag and not defined $opt::tagstring) {
	# Default = {}
	$opt::tagstring = $Global::parensleft.$Global::parensright;
    }
    if(grep /^$Global::arg_sep\+?$|^$Global::arg_file_sep\+?$/o, @ARGV) {
        # Deal with ::: :::+ :::: and ::::+
        @ARGV = read_args_from_command_line();
    }
    parse_semaphore();

    if(defined $opt::eta) { $opt::progress = $opt::eta; }
    if(defined $opt::bar) { $opt::progress = $opt::bar; }

    parse_halt();

    if($ENV{'PARALLEL_ENV'}) {
	# Read environment and set $Global::parallel_env
	# Must be done before is_acceptable_command_line_length()
	my $penv = $ENV{'PARALLEL_ENV'};
	# unset $PARALLEL_ENV: It should not be given to children
	# because it takes up a lot of env space
	delete $ENV{'PARALLEL_ENV'};
	if(-e $penv) {
	    # This is a file/fifo: Replace envvar with content of file
	    open(my $parallel_env, "<", $penv) ||
		::die_bug("Cannot read parallel_env from $penv");
	    local $/; # Put <> in slurp mode
	    $penv = <$parallel_env>;
	    close $parallel_env;
	}
	# Map \001 to \n to make it easer to quote \n in $PARALLEL_ENV
	$penv =~ s/\001/\n/g;
	if($penv =~ /\0/) {
	    ::warning('\0 (NUL) in environment is not supported');
	}
	$Global::parallel_env = $penv;
    }

    parse_sshlogin();

    if(remote_hosts() and ($opt::X or $opt::m or $opt::xargs)) {
        # As we do not know the max line length on the remote machine
        # long commands generated by xargs may fail
        # If $opt::max_replace_args is set, it is probably safe
        ::warning("Using -X or -m with --sshlogin may fail.");
    }

    if(not defined $opt::jobs) { $opt::jobs = "100%"; }
    open_joblog();
    open_csv();
    if($opt::sqlmaster or $opt::sqlworker) {
	$Global::sql = SQL->new($opt::sqlmaster || $opt::sqlworker);
    }
    if($opt::sqlworker) { $Global::membuffer ||= 1; }
}

sub check_invalid_option_combinations() {
    if(defined $opt::timeout and
       $opt::timeout !~ /^\d+(\.\d+)?%?$|^(\d+(\.\d+)?[dhms])+$/i) {
	::error("--timeout must be seconds or percentage.");
	wait_and_exit(255);
    }
    if(defined $opt::fifo and defined $opt::cat) {
	::error("--fifo cannot be combined with --cat.");
	::wait_and_exit(255);
    }
    if(defined $opt::retries and defined $opt::roundrobin) {
	::error("--retries cannot be combined with --roundrobin.");
	::wait_and_exit(255);
    }
    if(defined $opt::pipepart and
       (defined $opt::L or defined $opt::max_lines
	or defined $opt::max_replace_args)) {
	::error("--pipepart is incompatible with --max-replace-args, ".
		"--max-lines, and -L.");
	wait_and_exit(255);
    }
    if(defined $opt::group and $opt::ungroup) {
	::error("--group cannot be combined with --ungroup.");
	::wait_and_exit(255);
    }
    if(defined $opt::group and $opt::linebuffer) {
	::error("--group cannot be combined with --line-buffer.");
	::wait_and_exit(255);
    }
    if(defined $opt::ungroup and $opt::linebuffer) {
	::error("--ungroup cannot be combined with --line-buffer.");
	::wait_and_exit(255);
    }
    if(defined $opt::tollef and not $opt::gnu) {
       ::error("--tollef has been retired.",
	       "Remove --tollef or use --gnu to override --tollef.");
       ::wait_and_exit(255);
    }
    if(defined $opt::retired) {
	    ::error("-g has been retired. Use --group.",
		    "-B has been retired. Use --bf.",
		    "-T has been retired. Use --tty.",
		    "-U has been retired. Use --er.",
		    "-W has been retired. Use --wd.",
		    "-Y has been retired. Use --shebang.",
		    "-H has been retired. Use --halt.",
		    "--sql has been retired. Use --sqlmaster.",
		    "--ctrlc has been retired.",
		    "--noctrlc has been retired.");
            ::wait_and_exit(255);
    }
    if($opt::groupby) {
	if(not $opt::pipe and not $opt::pipepart) {
	    $opt::pipe = 1;
	}
	if($opt::remove_rec_sep) {
	    ::error("--remove-rec-sep is not compatible with --groupby");
            ::wait_and_exit(255);
	}
	if($opt::recstart) {
	    ::error("--recstart is not compatible with --groupby");
            ::wait_and_exit(255);
	}
	if($opt::recend ne "\n") {
	    ::error("--recend is not compatible with --groupby");
            ::wait_and_exit(255);
	}
    }
}

sub init_globals() {
    # Defaults:
    $Global::version = 20191122;
    $Global::progname = 'parallel';
    $::name = "Parallel";
    $Global::infinity = 2**31;
    $Global::debug = 0;
    $Global::verbose = 0;
    # Don't quote every part of the command line
    $Global::quoting = 0;
    # Quote replacement strings
    $Global::quote_replace = 1;
    $Global::total_completed = 0;
    $Global::cache_replacement_eval = 1;
    # Read only table with default --rpl values
    %Global::replace =
	(
	 '{}'   => '',
	 '{#}'  => '1 $_=$job->seq()',
	 '{%}'  => '1 $_=$job->slot()',
	 '{/}'  => 's:.*/::',
	 '{//}' =>
	 ('$Global::use{"File::Basename"} ||= eval "use File::Basename; 1;"; '.
	  '$_ = dirname($_);'),
	 '{/.}' => 's:.*/::; s:\.[^/.]+$::;',
	 '{.}'  => 's:\.[^/.]+$::',
	);
    %Global::plus =
	(
	 # {} = {+/}/{/}
	 #    = {.}.{+.}     = {+/}/{/.}.{+.}
	 #    = {..}.{+..}   = {+/}/{/..}.{+..}
	 #    = {...}.{+...} = {+/}/{/...}.{+...}
	 '{+/}' => 's:/[^/]*$::',
	 '{+.}' => 's:.*\.::',
	 '{+..}' => 's:.*\.([^.]*\.):$1:',
	 '{+...}' => 's:.*\.([^.]*\.[^.]*\.):$1:',
	 '{..}' => 's:\.[^/.]+$::; s:\.[^/.]+$::',
	 '{...}' => 's:\.[^/.]+$::; s:\.[^/.]+$::; s:\.[^/.]+$::',
	 '{/..}' => 's:.*/::; s:\.[^/.]+$::; s:\.[^/.]+$::',
	 '{/...}' => 's:.*/::; s:\.[^/.]+$::; s:\.[^/.]+$::; s:\.[^/.]+$::',
	 '{choose_k}' => 'for $t (2..$#arg){ if($arg[$t-1] ge $arg[$t]) { skip() } }',
	 # {##} = number of jobs
	 '{##}' => '$_=total_jobs()',
	 # Bash ${a:-myval}
	 '{:-([^}]+?)}' => '$_ ||= $$1',
	 # Bash ${a:2}
	 '{:(\d+?)}' => 'substr($_,0,$$1) = ""',
	 # Bash ${a:2:3}
	 '{:(\d+?):(\d+?)}' => '$_ = substr($_,$$1,$$2);',
	 # Bash ${a#bc}
	 '{#([^#}][^}]*?)}' => 's/^$$1//;',
	 # Bash ${a%def}
	 '{%([^}]+?)}' => 's/$$1$//;',
	 # Bash ${a/def/ghi} ${a/def/}
	 '{/([^}]+?)/([^}]*?)}' => 's/$$1/$$2/;',
	 # Bash ${a^a}
	 '{^([^}]+?)}' => 's/^($$1)/uc($1)/e;',
	 # Bash ${a^^a}
	 '{^^([^}]+?)}' => 's/($$1)/uc($1)/eg;',
	 # Bash ${a,A}
	 '{,([^}]+?)}' => 's/^($$1)/lc($1)/e;',
	 # Bash ${a,,A}
	 '{,,([^}]+?)}' => 's/($$1)/lc($1)/eg;',
	);
    # Modifiable copy of %Global::replace
    %Global::rpl = %Global::replace;
    $/ = "\n";
    $Global::ignore_empty = 0;
    $Global::interactive = 0;
    $Global::stderr_verbose = 0;
    $Global::default_simultaneous_sshlogins = 9;
    $Global::exitstatus = 0;
    $Global::arg_sep = ":::";
    $Global::arg_file_sep = "::::";
    $Global::trim = 'n';
    $Global::max_jobs_running = 0;
    $Global::job_already_run = '';
    $ENV{'TMPDIR'} ||= "/tmp";
    $ENV{'OLDPWD'} = $ENV{'PWD'};
    if(not $ENV{HOME}) {
	# $ENV{HOME} is sometimes not set if called from PHP
	::warning("\$HOME not set. Using /tmp.");
	$ENV{HOME} = "/tmp";
    }
    # no warnings to allow for undefined $XDG_*
    no warnings 'uninitialized';
    # $xdg_config_home is needed to make env_parallel.fish stop complaining
    my $xdg_config_home = $ENV{'XDG_CONFIG_HOME'};
    # config_dirs = $PARALLEL_HOME, $XDG_CONFIG_HOME/parallel,
    #   $(each XDG_CONFIG_DIRS)/parallel, $HOME/.parallel
    # Keep only dirs that exist
    @Global::config_dirs =
	(grep { -d $_ }
	 $ENV{'PARALLEL_HOME'},
	 (map { "$_/parallel" }
	  $xdg_config_home,
	  split /:/, $ENV{'XDG_CONFIG_DIRS'}),
	 $ENV{'HOME'} . "/.parallel");
    # Use first dir as config dir
    $Global::config_dir = $Global::config_dirs[0] ||
	$ENV{'HOME'} . "/.parallel";
    # cache_dirs = $PARALLEL_HOME, $XDG_CACHE_HOME/parallel,
    # Keep only dirs that exist
    @Global::cache_dirs =
	(grep { -d $_ }
	 $ENV{'PARALLEL_HOME'}, $ENV{'XDG_CACHE_HOME'}."/parallel");
    $Global::cache_dir = $Global::cache_dirs[0] ||
	$ENV{'HOME'} . "/.parallel";
}

sub parse_halt() {
    # $opt::halt flavours
    # Uses:
    #   $opt::halt
    #   $Global::halt_when
    #   $Global::halt_fail
    #   $Global::halt_success
    #   $Global::halt_pct
    #   $Global::halt_count
    if(defined $opt::halt) {
	my %halt_expansion = (
	    "0" => "never",
	    "1" => "soon,fail=1",
	    "2" => "now,fail=1",
	    "-1" => "soon,success=1",
	    "-2" => "now,success=1",
	);
	# Expand -2,-1,0,1,2 into long form
	$opt::halt = $halt_expansion{$opt::halt} || $opt::halt;
	# --halt 5% == --halt soon,fail=5%
	$opt::halt =~ s/^(\d+)%$/soon,fail=$1%/;
	# Split: soon,fail=5%
	my ($when,$fail_success,$pct_count) = split /[,=]/, $opt::halt;
	if(not grep { $when eq $_ } qw(never soon now)) {
	    ::error("--halt must have 'never', 'soon', or 'now'.");
	    ::wait_and_exit(255);
	}
	$Global::halt_when = $when;
	if($when ne "never") {
	    if($fail_success eq "fail") {
		$Global::halt_fail = 1;
	    } elsif($fail_success eq "success") {
		$Global::halt_success = 1;
	    } elsif($fail_success eq "done") {
		$Global::halt_done = 1;
	    } else {
		::error("--halt $when must be followed by ,success or ,fail.");
		::wait_and_exit(255);
	    }
	    if($pct_count =~ /^(\d+)%$/) {
		$Global::halt_pct = $1/100;
	    } elsif($pct_count =~ /^(\d+)$/) {
		$Global::halt_count = $1;
	    } else {
		::error("--halt $when,$fail_success ".
			"must be followed by ,number or ,percent%.");
		::wait_and_exit(255);
	    }
	}
    }
}

sub parse_replacement_string_options() {
    # Deal with --rpl
    # Uses:
    #   %Global::rpl
    #   $Global::parensleft
    #   $Global::parensright
    #   $opt::parens
    #   $Global::parensleft
    #   $Global::parensright
    #   $opt::plus
    #   %Global::plus
    #   $opt::I
    #   $opt::U
    #   $opt::i
    #   $opt::basenamereplace
    #   $opt::dirnamereplace
    #   $opt::seqreplace
    #   $opt::slotreplace
    #   $opt::basenameextensionreplace

    sub rpl($$) {
	# Modify %Global::rpl
	# Replace $old with $new
	my ($old,$new) =  @_;
	if($old ne $new) {
	    $Global::rpl{$new} = $Global::rpl{$old};
	    delete $Global::rpl{$old};
	}
    }
    my $parens = "{==}";
    if(defined $opt::parens) { $parens = $opt::parens; }
    my $parenslen = 0.5*length $parens;
    $Global::parensleft = substr($parens,0,$parenslen);
    $Global::parensright = substr($parens,$parenslen);
    if(defined $opt::plus) { %Global::rpl = (%Global::plus,%Global::rpl); }
    if(defined $opt::I) { rpl('{}',$opt::I); }
    if(defined $opt::i and $opt::i) { rpl('{}',$opt::i); }
    if(defined $opt::U) { rpl('{.}',$opt::U); }
    if(defined $opt::basenamereplace) { rpl('{/}',$opt::basenamereplace); }
    if(defined $opt::dirnamereplace) { rpl('{//}',$opt::dirnamereplace); }
    if(defined $opt::seqreplace) { rpl('{#}',$opt::seqreplace); }
    if(defined $opt::slotreplace) { rpl('{%}',$opt::slotreplace); }
    if(defined $opt::basenameextensionreplace) {
       rpl('{/.}',$opt::basenameextensionreplace);
    }
    for(@opt::rpl) {
	# Create $Global::rpl entries for --rpl options
	# E.g: "{..} s:\.[^.]+$:;s:\.[^.]+$:;"
	my ($shorthand,$long) = split/ /,$_,2;
	$Global::rpl{$shorthand} = $long;
    }
}

sub parse_semaphore() {
    # Semaphore defaults
    # Must be done before computing number of processes and max_line_length
    # because when running as a semaphore Parallel does not read args
    # Uses:
    #   $opt::semaphore
    #   $Global::semaphore
    #   $opt::semaphoretimeout
    #   $Semaphore::timeout
    #   $opt::semaphorename
    #   $Semaphore::name
    #   $opt::fg
    #   $Semaphore::fg
    #   $opt::wait
    #   $Semaphore::wait
    #   $opt::bg
    #   @opt::a
    #   @Global::unget_argv
    #   $Global::default_simultaneous_sshlogins
    #   $opt::jobs
    #   $Global::interactive
    $Global::semaphore ||= ($0 =~ m:(^|/)sem$:); # called as 'sem'
    if(defined $opt::semaphore) { $Global::semaphore = 1; }
    if(defined $opt::semaphoretimeout) { $Global::semaphore = 1; }
    if(defined $opt::semaphorename) { $Global::semaphore = 1; }
    if(defined $opt::fg and not $opt::tmux and not $opt::tmuxpane) {
	$Global::semaphore = 1;
    }
    if(defined $opt::bg) { $Global::semaphore = 1; }
    if(defined $opt::wait and not $opt::sqlmaster) {
	$Global::semaphore = 1; @ARGV = "true";
    }
    if($Global::semaphore) {
	if(@opt::a) {
	    # A semaphore does not take input from neither stdin nor file
	    ::error("A semaphore does not take input from neither stdin nor a file\n");
	    ::wait_and_exit(255);
	}
	@opt::a = ("/dev/null");
	# Append a dummy empty argument
	# \0 => nothing (not the empty string)
        push(@Global::unget_argv, [Arg->new("\0noarg")]);
        $Semaphore::timeout = $opt::semaphoretimeout || 0;
        if(defined $opt::semaphorename) {
            $Semaphore::name = $opt::semaphorename;
        } else {
            local $/ = "\n";
            $Semaphore::name = `tty`;
            chomp $Semaphore::name;
        }
        $Semaphore::fg = $opt::fg;
        $Semaphore::wait = $opt::wait;
        $Global::default_simultaneous_sshlogins = 1;
        if(not defined $opt::jobs) {
            $opt::jobs = 1;
        }
	if($Global::interactive and $opt::bg) {
	    ::error("Jobs running in the ".
		    "background cannot be interactive.");
            ::wait_and_exit(255);
	}
    }
}

sub record_env() {
    # Record current %ENV-keys in $PARALLEL_HOME/ignored_vars
    # Returns: N/A
    my $ignore_filename = $Global::config_dir . "/ignored_vars";
    if(open(my $vars_fh, ">", $ignore_filename)) {
	print $vars_fh map { $_,"\n" } keys %ENV;
    } else {
	::error("Cannot write to $ignore_filename.");
	::wait_and_exit(255);
    }
}

sub open_joblog() {
    # Open joblog as specified by --joblog
    # Uses:
    #   $opt::resume
    #   $opt::resume_failed
    #   $opt::joblog
    #   $opt::results
    #   $Global::job_already_run
    #   %Global::fd
    my $append = 0;
    if(($opt::resume or $opt::resume_failed)
       and
       not ($opt::joblog or $opt::results)) {
        ::error("--resume and --resume-failed require --joblog or --results.");
	::wait_and_exit(255);
    }
    if(defined $opt::joblog and $opt::joblog =~ s/^\+//) {
	# --joblog +filename = append to filename
	$append = 1;
    }
    if($opt::joblog
       and
       ($opt::sqlmaster
	or
	not $opt::sqlworker)) {
	# Do not log if --sqlworker
	if($opt::resume || $opt::resume_failed || $opt::retry_failed) {
	    if(open(my $joblog_fh, "<", $opt::joblog)) {
		# Read the joblog
		# Override $/ with \n because -d might be set
		local $/ = "\n";
		# If there is a header: Open as append later
		$append = <$joblog_fh>;
		my $joblog_regexp;
		if($opt::retry_failed) {
		    # Make a regexp that only matches commands with exit+signal=0
		    # 4 host 1360490623.067 3.445 1023 1222 0 0 command
		    $joblog_regexp='^(\d+)(?:\t[^\t]+){5}\t0\t0\t';
		    my @group;
		    while(<$joblog_fh>) {
			if(/$joblog_regexp/o) {
			    # This is 30% faster than set_job_already_run($1);
			    vec($Global::job_already_run,($1||0),1) = 1;
			    $Global::total_completed++;
			    $group[$1-1] = "true";
			} elsif(/(\d+)\s+\S+(\s+[-0-9.]+){6}\s+(.*)$/) {
			    # Grab out the command
			    $group[$1-1] = $3;
			} else {
			    chomp;
			    ::error("Format of '$opt::joblog' is wrong: $_");
			    ::wait_and_exit(255);
			}
		    }
		    if(@group) {
			my ($outfh,$name) = ::tmpfile(SUFFIX => ".arg");
			unlink($name);
			# Put args into argfile
			if(grep /\0/, @group) {
			    # force --null to deal with \n in commandlines
			    ::warning("Command lines contain newline. Forcing --null.");
			    $opt::null = 1;
			    $/ = "\0";
			}
			# Replace \0 with '\n' as used in print_joblog()
			print $outfh map { s/\0/\n/g; $_,$/ } map { $_ } @group;
			seek $outfh, 0, 0;
			exit_if_disk_full();
			# Set filehandle to -a
			@opt::a = ($outfh);
		    }
		    # Remove $command (so -a is run)
		    @ARGV = ();
		}
		if($opt::resume || $opt::resume_failed) {
		    if($opt::resume_failed) {
			# Make a regexp that only matches commands with exit+signal=0
			# 4 host 1360490623.067 3.445 1023 1222 0 0 command
			$joblog_regexp='^(\d+)(?:\t[^\t]+){5}\t0\t0\t';
		    } else {
			# Just match the job number
			$joblog_regexp='^(\d+)';
		    }
		    while(<$joblog_fh>) {
			if(/$joblog_regexp/o) {
			    # This is 30% faster than set_job_already_run($1);
			    vec($Global::job_already_run,($1||0),1) = 1;
			    $Global::total_completed++;
			} elsif(not /\d+\s+[^\s]+\s+([-0-9.]+\s+){6}/) {
			    ::error("Format of '$opt::joblog' is wrong: $_");
			    ::wait_and_exit(255);
			}
		    }
		}
		close $joblog_fh;
	    }
	    # $opt::null may be set if the commands contain \n
	    if($opt::null) { $/ = "\0"; }
	}
	if($opt::dryrun) {
	    # Do not write to joblog in a dry-run
	    if(not open($Global::joblog, ">", "/dev/null")) {
		::error("Cannot write to --joblog $opt::joblog.");
		::wait_and_exit(255);
	    }
	} elsif($append) {
	    # Append to joblog
	    if(not open($Global::joblog, ">>", $opt::joblog)) {
		::error("Cannot append to --joblog $opt::joblog.");
		::wait_and_exit(255);
	    }
	} else {
	    if($opt::joblog eq "-") {
		# Use STDOUT as joblog
		$Global::joblog = $Global::fd{1};
	    } elsif(not open($Global::joblog, ">", $opt::joblog)) {
		# Overwrite the joblog
		::error("Cannot write to --joblog $opt::joblog.");
		::wait_and_exit(255);
	    }
	    print $Global::joblog
		join("\t", "Seq", "Host", "Starttime", "JobRuntime",
		     "Send", "Receive", "Exitval", "Signal", "Command"
		). "\n";
	}
    }
}

sub open_csv() {
    if($opt::results) {
	# Output as CSV/TSV
	if($opt::results eq "-.csv"
	   or
	   $opt::results eq "-.tsv") {
	    # Output as CSV/TSV on stdout
	    open $Global::csv_fh, ">&", "STDOUT" or
		::die_bug("Can't dup STDOUT in csv: $!");
	    # Do not print any other output to STDOUT
	    # by forcing all other output to /dev/null
	    open my $fd, ">", "/dev/null" or
		::die_bug("Can't >/dev/null in csv: $!");
	    $Global::fd{1} = $fd;
	    $Global::fd{2} = $fd;
	} elsif($Global::csvsep) {
	    if(not open($Global::csv_fh,">",$opt::results)) {
		::error("Cannot open results file `$opt::results': ".
			"$!.");
		wait_and_exit(255);
	    }
	}
    }
}

sub find_compression_program() {
    # Find a fast compression program
    # Returns:
    #   $compress_program = compress program with options
    #   $decompress_program = decompress program with options

    # Search for these. Sorted by speed on 128 core

    # seq 120000000|shuf > 1gb &
    # apt-get update
    # apt install make g++ htop
    # wget -O - pi.dk/3 | bash
    # apt install zstd clzip liblz4-tool lzop pigz pxz gzip plzip pbzip2 lzma xz-utils lzip bzip2 lbzip2 lrzip pixz
    # git clone https://github.com/facebook/zstd.git
    # (cd zstd/contrib/pzstd; make -j; cp pzstd /usr/local/bin)
    # echo 'lrzip -L $((-$1))'  >/usr/local/bin/lrz
    # chmod +x /usr/local/bin/lrz
    # wait
    # onethread="zstd clzip lz4 lzop gzip lzma xz bzip2"
    # multithread="pzstd pigz pxz plzip pbzip2 lzip lbzip2 lrz pixz"
    # parallel --shuf -j1  --joblog jl-m --arg-sep ,  parallel --compress-program \'{3}" "-{2}\' cat ::: 1gb '>'/dev/null , 1 2 3 ,  {1..3} , $multithread
    # parallel --shuf -j50% --delay 1  --joblog jl-s --arg-sep ,  parallel --compress-program \'{3}" "-{2}\' cat ::: 1gb '>'/dev/null , 1 2 3 ,  {1..3} , $onethread
    # sort -nk4 jl-?

    # 1-core:
    # 2-cores: pzstd zstd lz4 lzop pigz gzip lbzip2 pbzip2 lrz bzip2 lzma pxz plzip xz lzip clzip
    # 4-cores:
    # 8-cores: pzstd lz4 zstd pigz lzop lbzip2 pbzip2 gzip lzip lrz plzip pxz bzip2 lzma xz clzip
    # 16-cores: pzstd lz4 pigz lzop lbzip2 pbzip2 plzip lzip lrz pxz gzip lzma xz bzip2
    # 32-cores: pzstd lbzip2 pbzip2 zstd pigz lz4 lzop plzip lzip lrz gzip pxz lzma bzip2 xz clzip
    # 64-cores: pzstd lbzip2 pbzip2 pigz zstd pixz lz4 plzip lzop lzip lrz gzip pxz lzma bzip2 xz clzip
    # 128-core: pzstd lbzip2 pbzip2 zstd pixz lz4 pigz lzop plzip lzip gzip lrz pxz bzip2 lzma xz clzip

    my @prg = qw(pzstd lbzip2 pbzip2 zstd pixz lz4 pigz lzop plzip lzip gzip
                 lrz pxz bzip2 lzma xz clzip);
    for my $p (@prg) {
	if(which($p)) {
	    return ("$p -c -1","$p -dc");
	}
    }
    # Fall back to cat
    return ("cat","cat");
}

sub read_options() {
    # Read options from command line, profile and $PARALLEL
    # Uses:
    #   $opt::shebang_wrap
    #   $opt::shebang
    #   @ARGV
    #   $opt::plain
    #   @opt::profile
    #   $ENV{'HOME'}
    #   $ENV{'PARALLEL'}
    # Returns:
    #   @ARGV_no_opt = @ARGV without --options

    # This must be done first as this may exec myself
    if(defined $ARGV[0] and ($ARGV[0] =~ /^--shebang/ or
			     $ARGV[0] =~ /^--shebang-?wrap/ or
			     $ARGV[0] =~ /^--hashbang/)) {
        # Program is called from #! line in script
	# remove --shebang-wrap if it is set
        $opt::shebang_wrap = ($ARGV[0] =~ s/^--shebang-?wrap *//);
	# remove --shebang if it is set
	$opt::shebang = ($ARGV[0] =~ s/^--shebang *//);
	# remove --hashbang if it is set
        $opt::shebang .= ($ARGV[0] =~ s/^--hashbang *//);
	if($opt::shebang) {
	    my $argfile = Q(pop @ARGV);
	    # exec myself to split $ARGV[0] into separate fields
	    exec "$0 --skip-first-line -a $argfile @ARGV";
	}
	if($opt::shebang_wrap) {
            my @options;
	    my @parser;
	    if ($^O eq 'freebsd') {
		# FreeBSD's #! puts different values in @ARGV than Linux' does.
		my @nooptions = @ARGV;
		get_options_from_array(\@nooptions);
		while($#ARGV > $#nooptions) {
		    push @options, shift @ARGV;
		}
		while(@ARGV and $ARGV[0] ne ":::") {
		    push @parser, shift @ARGV;
		}
		if(@ARGV and $ARGV[0] eq ":::") {
		    shift @ARGV;
		}
	    } else {
		@options = shift @ARGV;
	    }
	    my $script = Q(shift @ARGV);
	    # exec myself to split $ARGV[0] into separate fields
	    exec "$0 --internal-pipe-means-argfiles @options @parser $script ".
		"::: @ARGV";
	}
    }
    if($ARGV[0] =~ / --shebang(-?wrap)? /) {
	::warning("--shebang and --shebang-wrap must be the first argument.\n");
    }

    Getopt::Long::Configure("bundling","require_order");
    my @ARGV_copy = @ARGV;
    my @ARGV_orig = @ARGV;
    # Check if there is a --profile to set @opt::profile
    get_options_from_array(\@ARGV_copy,"profile|J=s","plain") || die_usage();
    my @ARGV_profile = ();
    my @ARGV_env = ();
    if(not $opt::plain) {
	# Add options from $PARALLEL_HOME/config and other profiles
	my @config_profiles = (
	    "/etc/parallel/config",
	    (map { "$_/config" } @Global::config_dirs),
	    $ENV{'HOME'}."/.parallelrc");
	my @profiles = @config_profiles;
	if(@opt::profile) {
	    # --profile overrides default profiles
	    @profiles = ();
	    for my $profile (@opt::profile) {
		if($profile =~ m:^\./|^/:) {
		    # Look for ./profile in .
		    # Look for /profile in /
		    push @profiles, grep { -r $_ } $profile;
		} else {
		    # Look for the $profile in @Global::config_dirs
		    push @profiles, grep { -r $_ }
		    map { "$_/$profile" } @Global::config_dirs;
		}
	    }
	}
	for my $profile (@profiles) {
	    if(-r $profile) {
		::debug("init","Read $profile\n");
                local $/ = "\n";
		open (my $in_fh, "<", $profile) ||
		    ::die_bug("read-profile: $profile");
		while(<$in_fh>) {
		    /^\s*\#/ and next;
		    chomp;
		    push @ARGV_profile, shell_words($_);
		}
		close $in_fh;
	    } else {
		if(grep /^$profile$/, @config_profiles) {
		    # config file is not required to exist
		} else {
		    ::error("$profile not readable.");
		    wait_and_exit(255);
		}
	    }
	}
	# Add options from shell variable $PARALLEL
	if($ENV{'PARALLEL'}) {
	    push @ARGV_env, shell_words($ENV{'PARALLEL'});
	}
	# Add options from env_parallel.csh via $PARALLEL_CSH
	if($ENV{'PARALLEL_CSH'}) {
	    push @ARGV_env, shell_words($ENV{'PARALLEL_CSH'});
	}
    }
    Getopt::Long::Configure("bundling","require_order");
    get_options_from_array(\@ARGV_profile) || die_usage();
    get_options_from_array(\@ARGV_env) || die_usage();
    get_options_from_array(\@ARGV) || die_usage();
    # What were the options given on the command line?
    # Used to start --sqlworker
    my $ai = arrayindex(\@ARGV_orig, \@ARGV);
    @Global::options_in_argv = @ARGV_orig[0..$ai-1];
    # Prepend non-options to @ARGV (such as commands like 'nice')
    unshift @ARGV, @ARGV_profile, @ARGV_env;
    return @ARGV;
}

sub arrayindex() {
    # Similar to Perl's index function, but for arrays
    # Input:
    #   $arr_ref1 = ref to @array1 to search in
    #   $arr_ref2 = ref to @array2 to search for
    # Returns:
    #   $pos = position of @array1 in @array2, -1 if not found
    my ($arr_ref1,$arr_ref2) = @_;
    my $array1_as_string = join "", map { "\0".$_ } @$arr_ref1;
    my $array2_as_string = join "", map { "\0".$_ } @$arr_ref2;
    my $i = index($array1_as_string,$array2_as_string,0);
    if($i == -1) { return -1 }
    my @before = split /\0/, substr($array1_as_string,0,$i);
    return $#before;
}

sub read_args_from_command_line() {
    # Arguments given on the command line after:
    #   ::: ($Global::arg_sep)
    #   :::: ($Global::arg_file_sep)
    #   :::+ ($Global::arg_sep with --link)
    #   ::::+ ($Global::arg_file_sep with --link)
    # Removes the arguments from @ARGV and:
    # - puts filenames into -a
    # - puts arguments into files and add the files to -a
    # - adds --linkinputsource with 0/1 for each -a depending on :::+/::::+
    # Input:
    #   @::ARGV = command option ::: arg arg arg :::: argfiles
    # Uses:
    #   $Global::arg_sep
    #   $Global::arg_file_sep
    #   $opt::internal_pipe_means_argfiles
    #   $opt::pipe
    #   @opt::a
    # Returns:
    #   @argv_no_argsep = @::ARGV without ::: and :::: and following args
    my @new_argv = ();
    for(my $arg = shift @ARGV; @ARGV; $arg = shift @ARGV) {
        if($arg eq $Global::arg_sep
	   or
	   $arg eq $Global::arg_sep."+"
	   or
	   $arg eq $Global::arg_file_sep
	   or
	   $arg eq $Global::arg_file_sep."+") {
	    my $group_sep = $arg; # This group of arguments is args or argfiles
	    my @group;
	    while(defined ($arg = shift @ARGV)) {
		if($arg eq $Global::arg_sep
		   or
		   $arg eq $Global::arg_sep."+"
		   or
		   $arg eq $Global::arg_file_sep
		   or
		   $arg eq $Global::arg_file_sep."+") {
		    # exit while loop if finding new separator
		    last;
		} else {
		    # If not hitting ::: :::+ :::: or ::::+
		    # Append it to the group
		    push @group, $arg;
		}
	    }
	    my $is_linked = ($group_sep =~ /\+$/) ? 1 : 0;
	    my $is_file = ($group_sep eq $Global::arg_file_sep
			   or
			   $group_sep eq $Global::arg_file_sep."+");
	    if($is_file) {
		# :::: / ::::+
		push @opt::linkinputsource, map { $is_linked } @group;
	    } else {
		# ::: / :::+
		push @opt::linkinputsource, $is_linked;
	    }
	    if($is_file
	       or ($opt::internal_pipe_means_argfiles and $opt::pipe)
		) {
		# Group of file names on the command line.
		# Append args into -a
		push @opt::a, @group;
	    } else {
		# Group of arguments on the command line.
		# Put them into a file.
		# Create argfile
		my ($outfh,$name) = ::tmpfile(SUFFIX => ".arg");
		unlink($name);
		# Put args into argfile
		print $outfh map { $_,$/ } @group;
		seek $outfh, 0, 0;
		exit_if_disk_full();
		# Append filehandle to -a
		push @opt::a, $outfh;
	    }
	    if(defined($arg)) {
		# $arg is ::: :::+ :::: or ::::+
		# so there is another group
		redo;
	    } else {
		# $arg is undef -> @ARGV empty
		last;
	    }
	}
	push @new_argv, $arg;
    }
    # Output: @ARGV = command to run with options
    return @new_argv;
}

sub cleanup() {
    # Returns: N/A
    unlink keys %Global::unlink;
    map { rmdir $_ } keys %Global::unlink;
    if(@opt::basefile and $opt::cleanup) { cleanup_basefile(); }
    for(keys %Global::sshmaster) {
	# If 'ssh -M's are running: kill them
	kill "TERM", $_;
    }
}


sub __QUOTING_ARGUMENTS_FOR_SHELL__() {}

sub shell_quote(@) {
    # Input:
    #   @strings = strings to be quoted
    # Returns:
    #   @shell_quoted_strings = string quoted as needed by the shell
    return wantarray ? (map { Q($_) } @_) : (join" ",map { Q($_) } @_);
}

sub shell_quote_scalar_rc($) {
    # Quote for the rc-shell
    my $a = $_[0];
    if(defined $a) {
	if(($a =~ s/'/''/g)
	   +
	   ($a =~ s/[\n\002-\011\013-\032\\\#\?\`\(\)\{\}\[\]\^\*\<\=\>\~\|\; \"\!\$\&\'\202-\377]+/'$&'/go)) {
	    # A string was replaced
	    # No need to test for "" or \0
	} elsif($a eq "") {
	    $a = "''";
	} elsif($a eq "\0") {
	    $a = "";
	}
    }
    return $a;
}

sub shell_quote_scalar_csh($) {
    # Quote for (t)csh
    my $a = $_[0];
    if(defined $a) {
	# $a =~ s/([\002-\011\013-\032\\\#\?\`\(\)\{\}\[\]\^\*\>\<\~\|\; \"\!\$\&\'\202-\377])/\\$1/g;
	# This is 1% faster than the above
	if(($a =~ s/[\002-\011\013-\032\\\#\?\`\(\)\{\}\[\]\^\*\<\=\>\~\|\; \"\!\$\&\'\202-\377]/\\$&/go)
	   +
	   # quote newline in csh as \\\n
	   ($a =~ s/[\n]/"\\\n"/go)) {
	    # A string was replaced
	    # No need to test for "" or \0
	} elsif($a eq "") {
	    $a = "''";
	} elsif($a eq "\0") {
	    $a = "";
	}
    }
    return $a;
}

sub shell_quote_scalar_default($) {
    # Quote for other shells (Bourne compatibles)
    # Inputs:
    #   $string = string to be quoted
    # Returns:
    #   $shell_quoted = string quoted as needed by the shell
    my $s = $_[0];
    if($s =~ /[^-_.+a-z0-9\/]/i) {
	$s =~ s/'/'"'"'/g; # "-quote single quotes
	$s = "'$s'";       # '-quote entire string
	$s =~ s/^''//;     # Remove unneeded '' at ends
	$s =~ s/''$//;     # (faster than s/^''|''$//g)
	return $s;
    } elsif ($s eq "") {
	return "''";
    } else {
	# No quoting needed
	return $s;
    }
}

sub shell_quote_scalar($) {
    # Quote the string so the shell will not expand any special chars
    # Inputs:
    #   $string = string to be quoted
    # Returns:
    #   $shell_quoted = string quoted as needed by the shell

    # Speed optimization: Choose the correct shell_quote_scalar_*
    # and call that directly from now on
    no warnings 'redefine';
    if($Global::cshell) {
	# (t)csh
	*shell_quote_scalar = \&shell_quote_scalar_csh;
    } elsif($Global::shell =~ m:(^|/)rc$:) {
	# rc-shell
	*shell_quote_scalar = \&shell_quote_scalar_rc;
    } else {
	# other shells
	*shell_quote_scalar = \&shell_quote_scalar_default;
    }
    # The sub is now redefined. Call it
    return shell_quote_scalar($_[0]);
}

sub Q($) {
    # Q alias for ::shell_quote_scalar
    my $ret = shell_quote_scalar($_[0]);
    no warnings 'redefine';
    *Q = \&::shell_quote_scalar;
    return $ret;
}

sub shell_quote_file($) {
    # Quote the string so shell will not expand any special chars
    # and prepend ./ if needed
    # Input:
    #   $filename = filename to be shell quoted
    # Returns:
    #   $quoted_filename = filename quoted with \ and ./ if needed
    my $a = shift;
    if(defined $a) {
	if($a =~ m:^/: or $a =~ m:^\./:) {
	    # /abs/path or ./rel/path => skip
	} else {
	    # rel/path => ./rel/path
	    $a = "./".$a;
	}
    }
    return Q($a);
}

sub shell_words(@) {
    # Input:
    #   $string = shell line
    # Returns:
    #   @shell_words = $string split into words as shell would do
    $Global::use{"Text::ParseWords"} ||= eval "use Text::ParseWords; 1;";
    return Text::ParseWords::shellwords(@_);
}

sub perl_quote_scalar($) {
    # Quote the string so perl's eval will not expand any special chars
    # Inputs:
    #   $string = string to be quoted
    # Returns:
    #   $perl_quoted = string quoted with \ as needed by perl's eval
    my $a = $_[0];
    if(defined $a) {
	$a =~ s/[\\\"\$\@]/\\$&/go;
    }
    return $a;
}

# -w complains about prototype
sub pQ($) {
    # pQ alias for ::perl_quote_scalar
    my $ret = perl_quote_scalar($_[0]);
    *pQ = \&::perl_quote_scalar;
    return $ret;
}

sub unquote_printf() {
    # Convert \t \n \r \000 \0
    # Inputs:
    #   $string = string with \t \n \r \num \0
    # Returns:
    #   $replaced = string with TAB NEWLINE CR <ascii-num> NUL
    $_ = shift;
    s/\\t/\t/g;
    s/\\n/\n/g;
    s/\\r/\r/g;
    s/\\(\d\d\d)/eval 'sprintf "\\'.$1.'"'/ge;
    s/\\(\d)/eval 'sprintf "\\'.$1.'"'/ge;
    return $_;
}


sub __FILEHANDLES__() {}


sub save_stdin_stdout_stderr() {
    # Remember the original STDIN, STDOUT and STDERR
    # and file descriptors opened by the shell (e.g. 3>/tmp/foo)
    # Uses:
    #   %Global::fd
    #   $Global::original_stderr
    #   $Global::original_stdin
    # Returns: N/A

    # TODO Disabled until we have an open3 that will take n filehandles
    # for my $fdno (1..61) {
    # # /dev/fd/62 and above are used by bash for <(cmd)
    # # Find file descriptors that are already opened (by the shell)
    # Only focus on stdout+stderr for now
    for my $fdno (1..2) {
     	my $fh;
     	# 2-argument-open is used to be compatible with old perl 5.8.0
     	# bug #43570: Perl 5.8.0 creates 61 files
     	if(open($fh,">&=$fdno")) {
     	    $Global::fd{$fdno}=$fh;
     	}
    }
    open $Global::original_stderr, ">&", "STDERR" or
	::die_bug("Can't dup STDERR: $!");
    open $Global::status_fd, ">&", "STDERR" or
	::die_bug("Can't dup STDERR: $!");
    open $Global::original_stdin, "<&", "STDIN" or
	::die_bug("Can't dup STDIN: $!");
}

sub enough_file_handles() {
    # Check that we have enough filehandles available for starting
    # another job
    # Uses:
    #   $opt::ungroup
    #   %Global::fd
    # Returns:
    #   1 if ungrouped (thus not needing extra filehandles)
    #   0 if too few filehandles
    #   1 if enough filehandles
    if(not $opt::ungroup) {
        my %fh;
        my $enough_filehandles = 1;
  	# perl uses 7 filehandles for something?
        # open3 uses 2 extra filehandles temporarily
        # We need a filehandle for each redirected file descriptor
	# (normally just STDOUT and STDERR)
	for my $i (1..(7+2+keys %Global::fd)) {
            $enough_filehandles &&= open($fh{$i}, "<", "/dev/null");
        }
        for (values %fh) { close $_; }
        return $enough_filehandles;
    } else {
	# Ungrouped does not need extra file handles
	return 1;
    }
}

sub open_or_exit($) {
    # Open a file name or exit if the file cannot be opened
    # Inputs:
    #   $file = filehandle or filename to open
    # Uses:
    #   $Global::original_stdin
    # Returns:
    #   $fh = file handle to read-opened file
    my $file = shift;
    if($file eq "-") {
	return ($Global::original_stdin || *STDIN);
    }
    if(ref $file eq "GLOB") {
	# This is an open filehandle
	return $file;
    }
    my $fh = gensym;
    if(not open($fh, "<", $file)) {
        ::error("Cannot open input file `$file': No such file or directory.");
        wait_and_exit(255);
    }
    return $fh;
}

sub set_fh_blocking($) {
    # Set filehandle as blocking
    # Inputs:
    #   $fh = filehandle to be blocking
    # Returns:
    #   N/A
    my $fh = shift;
    $Global::use{"Fcntl"} ||= eval "use Fcntl qw(:DEFAULT :flock); 1;";
    my $flags;
    # Get the current flags on the filehandle
    fcntl($fh, &F_GETFL, $flags) || die $!;
    # Remove non-blocking from the flags
    $flags &= ~&O_NONBLOCK;
    # Set the flags on the filehandle
    fcntl($fh, &F_SETFL, $flags) || die $!;
}

sub set_fh_non_blocking($) {
    # Set filehandle as non-blocking
    # Inputs:
    #   $fh = filehandle to be blocking
    # Returns:
    #   N/A
    my $fh = shift;
    $Global::use{"Fcntl"} ||= eval "use Fcntl qw(:DEFAULT :flock); 1;";
    my $flags;
    # Get the current flags on the filehandle
    fcntl($fh, &F_GETFL, $flags) || die $!;
    # Add non-blocking to the flags
    $flags |= &O_NONBLOCK;
    # Set the flags on the filehandle
    fcntl($fh, &F_SETFL, $flags) || die $!;
}


sub __RUNNING_THE_JOBS_AND_PRINTING_PROGRESS__() {}


# Variable structure:
#
#    $Global::running{$pid} = Pointer to Job-object
#    @Global::virgin_jobs = Pointer to Job-object that have received no input
#    $Global::host{$sshlogin} = Pointer to SSHLogin-object
#    $Global::total_running = total number of running jobs
#    $Global::total_started = total jobs started
#    $Global::max_procs_file = filename if --jobs is given a filename
#    $Global::JobQueue = JobQueue object for the queue of jobs
#    $Global::timeoutq = queue of times where jobs timeout
#    $Global::newest_job = Job object of the most recent job started
#    $Global::newest_starttime = timestamp of $Global::newest_job
#    @Global::sshlogin
#    $Global::minimal_command_line_length = minimum length supported by all sshlogins
#    $Global::start_no_new_jobs = should more jobs be started?
#    $Global::original_stderr = file handle for STDERR when the program started
#    $Global::total_started = total number of jobs started
#    $Global::joblog = filehandle of joblog
#    $Global::debug = Is debugging on?
#    $Global::exitstatus = status code of Parallel
#    $Global::quoting = quote the command to run

sub init_run_jobs() {
    # Set Global variables and progress signal handlers
    # Do the copying of basefiles
    # Returns: N/A
    $Global::total_running = 0;
    $Global::total_started = 0;
    $SIG{USR1} = \&list_running_jobs;
    $SIG{USR2} = \&toggle_progress;
    if(@opt::basefile) { setup_basefile(); }
}

{
    my $last_time;
    my %last_mtime;
    my $max_procs_file_last_mod;

    sub changed_procs_file {
	# If --jobs is a file and it is modfied:
	# Force recomputing of max_jobs_running for each $sshlogin
	# Uses:
	#   $Global::max_procs_file
	#   %Global::host
	# Returns: N/A
	if($Global::max_procs_file) {
	    # --jobs filename
	    my $mtime = (stat($Global::max_procs_file))[9];
	    $max_procs_file_last_mod ||= 0;
	    if($mtime > $max_procs_file_last_mod) {
		# file changed: Force re-computing max_jobs_running
		$max_procs_file_last_mod = $mtime;
		for my $sshlogin (values %Global::host) {
		    $sshlogin->set_max_jobs_running(undef);
		}
	    }
	}
    }

    sub changed_sshloginfile {
	# If --slf is changed:
	#   reload --slf
	#   filter_hosts
	#   setup_basefile
	# Uses:
	#   @opt::sshloginfile
	#   @Global::sshlogin
	#   %Global::host
	#   $opt::filter_hosts
	# Returns: N/A
	if(@opt::sshloginfile) {
	    # Is --sshloginfile changed?
	    for my $slf (@opt::sshloginfile) {
		my $actual_file = expand_slf_shorthand($slf);
		my $mtime = (stat($actual_file))[9];
		$last_mtime{$actual_file} ||= $mtime;
		if($mtime - $last_mtime{$actual_file} > 1) {
		    ::debug("run","--sshloginfile $actual_file changed. reload\n");
		    $last_mtime{$actual_file} = $mtime;
		    # Reload $slf
		    # Empty sshlogins
		    @Global::sshlogin = ();
		    for (values %Global::host) {
			# Don't start new jobs on any host
			# except the ones added back later
			$_->set_max_jobs_running(0);
		    }
		    # This will set max_jobs_running on the SSHlogins
		    read_sshloginfile($actual_file);
		    parse_sshlogin();
		    $opt::filter_hosts and filter_hosts();
		    setup_basefile();
		}
	    }
	}
    }

    sub start_more_jobs {
	# Run start_another_job() but only if:
	#   * not $Global::start_no_new_jobs set
	#   * not JobQueue is empty
	#   * not load on server is too high
	#   * not server swapping
	#   * not too short time since last remote login
	# Uses:
	#   %Global::host
	#   $Global::start_no_new_jobs
	#   $Global::JobQueue
	#   $opt::pipe
	#   $opt::load
	#   $opt::noswap
	#   $opt::delay
	#   $Global::newest_starttime
	# Returns:
	#   $jobs_started = number of jobs started
	my $jobs_started = 0;
	if($Global::start_no_new_jobs) {
	    return $jobs_started;
	}
	if(time - ($last_time||0) > 1) {
	    # At most do this every second
	    $last_time = time;
	    changed_procs_file();
	    changed_sshloginfile();
	}
	# This will start 1 job on each --sshlogin (if possible)
	# thus distribute the jobs on the --sshlogins round robin
	for my $sshlogin (values %Global::host) {
	    if($Global::JobQueue->empty() and not $opt::pipe) {
		# No more jobs in the queue
		last;
	    }
	    debug("run", "Running jobs before on ", $sshlogin->string(), ": ",
		  $sshlogin->jobs_running(), "\n");
	    if ($sshlogin->jobs_running() < $sshlogin->max_jobs_running()) {
		if($opt::delay
		   and
		   $opt::delay - 0.008 > ::now() - $Global::newest_starttime) {
		    # It has been too short since last start
		    next;
		}
		if($opt::load and $sshlogin->loadavg_too_high()) {
		    # The load is too high or unknown
		    next;
		}
		if($opt::noswap and $sshlogin->swapping()) {
		    # The server is swapping
		    next;
		}
		if($opt::limit and $sshlogin->limit()) {
		    # Over limit
		    next;
		}
		if($opt::memfree and $sshlogin->memfree() < $opt::memfree) {
		    # The server has not enough mem free
		    ::debug("mem", "Not starting job: not enough mem\n");
		    next;
		}
		if($sshlogin->too_fast_remote_login()) {
		    # It has been too short since
		    next;
		}
		debug("run", $sshlogin->string(),
		      " has ", $sshlogin->jobs_running(),
		      " out of ", $sshlogin->max_jobs_running(),
		      " jobs running. Start another.\n");
		if(start_another_job($sshlogin) == 0) {
		    # No more jobs to start on this $sshlogin
		    debug("run","No jobs started on ",
			  $sshlogin->string(), "\n");
		    next;
		}
		$sshlogin->inc_jobs_running();
		$sshlogin->set_last_login_at(::now());
		$jobs_started++;
	    }
	    debug("run","Running jobs after on ", $sshlogin->string(), ": ",
		  $sshlogin->jobs_running(), " of ",
		  $sshlogin->max_jobs_running(), "\n");
	}

	return $jobs_started;
    }
}

{
    my $no_more_file_handles_warned;

    sub start_another_job() {
	# If there are enough filehandles
	#   and JobQueue not empty
	#   and not $job is in joblog
	# Then grab a job from Global::JobQueue,
	#   start it at sshlogin
	#   mark it as virgin_job
	# Inputs:
	#   $sshlogin = the SSHLogin to start the job on
	# Uses:
	#   $Global::JobQueue
	#   $opt::pipe
	#   $opt::results
	#   $opt::resume
	#   @Global::virgin_jobs
	# Returns:
	#   1 if another jobs was started
	#   0 otherwise
	my $sshlogin = shift;
	# Do we have enough file handles to start another job?
	if(enough_file_handles()) {
	    if($Global::JobQueue->empty() and not $opt::pipe) {
		# No more commands to run
		debug("start", "Not starting: JobQueue empty\n");
		return 0;
	    } else {
		my $job;
		# Skip jobs already in job log
		# Skip jobs already in results
		do {
		    $job = get_job_with_sshlogin($sshlogin);
		    if(not defined $job) {
			# No command available for that sshlogin
			debug("start", "Not starting: no jobs available for ",
			      $sshlogin->string(), "\n");
			return 0;
		    }
		    if($job->is_already_in_joblog()) {
			$job->free_slot();
		    }
		} while ($job->is_already_in_joblog()
			 or
			 ($opt::results and $opt::resume and $job->is_already_in_results()));
		debug("start", "Command to run on '", $job->sshlogin()->string(), "': '",
		      $job->replaced(),"'\n");
		if($job->start()) {
		    if($opt::pipe) {
			if($job->virgin()) {
			    push(@Global::virgin_jobs,$job);
			} else {
			    # Block already set: This is a retry
			    if(fork()) {
				::debug("pipe","\n\nWriting ",length ${$job->block_ref()},
					" to ", $job->seq(),"\n");
				close $job->fh(0,"w");
			    } else {
				$job->write($job->block_ref());
				close $job->fh(0,"w");
				exit(0);
			    }
			}
		    }
		    debug("start", "Started as seq ", $job->seq(),
			  " pid:", $job->pid(), "\n");
		    return 1;
		} else {
		    # Not enough processes to run the job.
		    # Put it back on the queue.
		    $Global::JobQueue->unget($job);
		    # Count down the number of jobs to run for this SSHLogin.
		    my $max = $sshlogin->max_jobs_running();
		    if($max > 1) { $max--; } else {
			my @arg;
			for my $record (@{$job->{'commandline'}->{'arg_list'}}) {
			    push @arg, map { $_->orig() } @$record;
			}
			::error("No more processes: cannot run a single job. Something is wrong at @arg.");
			::wait_and_exit(255);
		    }
		    $sshlogin->set_max_jobs_running($max);
		    # Sleep up to 300 ms to give other processes time to die
		    ::usleep(rand()*300);
		    ::warning("No more processes: ".
			      "Decreasing number of running jobs to $max.",
			      "Raising ulimit -u or /etc/security/limits.conf may help.");
		    return 0;
		}
	    }
	} else {
	    # No more file handles
	    $no_more_file_handles_warned++ or
		::warning("No more file handles. ",
			  "Raising ulimit -n or /etc/security/limits.conf may help.");
	    debug("start", "No more file handles. ");
	    return 0;
	}
    }
}

sub init_progress() {
    # Uses:
    #   $opt::bar
    # Returns:
    #   list of computers for progress output
    $|=1;
    if($opt::bar) {
	return("","");
    }
    my %progress = progress();
    return ("\nComputers / CPU cores / Max jobs to run\n",
            $progress{'workerlist'});
}

sub drain_job_queue(@) {
    # Uses:
    #   $opt::progress
    #   $Global::total_running
    #   $Global::max_jobs_running
    #   %Global::running
    #   $Global::JobQueue
    #   %Global::host
    #   $Global::start_no_new_jobs
    # Returns: N/A
    my @command = @_;
    if($opt::progress) {
        ::status_no_nl(init_progress());
    }
    my $last_header = "";
    my $sleep = 0.2;
    do {
        while($Global::total_running > 0) {
            debug("init",$Global::total_running, "==", scalar
		  keys %Global::running," slots: ", $Global::max_jobs_running);
	    if($opt::pipe) {
		# When using --pipe sometimes file handles are not
		# closed properly
		for my $job (values %Global::running) {
		    close $job->fh(0,"w");
		}
	    }
            if($opt::progress) {
                my %progress = progress();
                if($last_header ne $progress{'header'}) {
                    ::status("", $progress{'header'});
                    $last_header = $progress{'header'};
                }
                ::status_no_nl("\r",$progress{'status'});
            }
	    if($Global::total_running < $Global::max_jobs_running
	       and not $Global::JobQueue->empty()) {
		# These jobs may not be started because of loadavg
		# or too little time between each ssh login.
		if(start_more_jobs() > 0) {
		    # Exponential back-on if jobs were started
		    $sleep = $sleep/2+0.001;
		}
	    }
            # Exponential back-off sleeping
	    $sleep = ::reap_usleep($sleep);
        }
        if(not $Global::JobQueue->empty()) {
	    # These jobs may not be started:
	    # * because there the --filter-hosts has removed all
	    if(not %Global::host) {
		::error("There are no hosts left to run on.");
		::wait_and_exit(255);
	    }
	    # * because of loadavg
	    # * because of too little time between each ssh login.
	    $sleep = ::reap_usleep($sleep);
            start_more_jobs();
	    if($Global::max_jobs_running == 0) {
		::warning("There are no job slots available. Increase --jobs.");
	    }
        }
	while($opt::sqlmaster and not $Global::sql->finished()) {
	    # SQL master
	    $sleep = ::reap_usleep($sleep);
            start_more_jobs();
	    if($Global::start_sqlworker) {
		# Start an SQL worker as we are now sure there is work to do
		$Global::start_sqlworker = 0;
		if(my $pid = fork()) {
		    $Global::unkilled_sqlworker = $pid;
		} else {
		    # Replace --sql/--sqlandworker with --sqlworker
		    my @ARGV = map { s/^--sql(andworker)?$/--sqlworker/; $_ } @Global::options_in_argv;
		    # exec the --sqlworker
		    exec($0,@ARGV,@command);
		}
	    }
	}
    } while ($Global::total_running > 0
	     or
	     not $Global::start_no_new_jobs and not $Global::JobQueue->empty()
	     or
	     $opt::sqlmaster and not $Global::sql->finished());
    if($opt::progress) {
	my %progress = progress();
	::status("\r".$progress{'status'});
    }
}

sub toggle_progress() {
    # Turn on/off progress view
    # Uses:
    #   $opt::progress
    # Returns: N/A
    $opt::progress = not $opt::progress;
    if($opt::progress) {
        ::status_no_nl(init_progress());
    }
}

sub progress() {
    # Uses:
    #   $opt::bar
    #   $opt::eta
    #   %Global::host
    #   $Global::total_started
    # Returns:
    #   $workerlist = list of workers
    #   $header = that will fit on the screen
    #   $status = message that will fit on the screen
    if($opt::bar) {
	return ("workerlist" => "", "header" => "", "status" => bar());
    }
    my $eta = "";
    my ($status,$header)=("","");
    if($opt::eta) {
	my($total, $completed, $left, $pctcomplete, $avgtime, $this_eta) =
	    compute_eta();
	$eta = sprintf("ETA: %ds Left: %d AVG: %.2fs  ",
		       $this_eta, $left, $avgtime);
    }
    my $termcols = terminal_columns();
    my @workers = sort keys %Global::host;
    my %sshlogin = map { $_ eq ":" ? ($_ => "local") : ($_ => $_) } @workers;
    my $workerno = 1;
    my %workerno = map { ($_=>$workerno++) } @workers;
    my $workerlist = "";
    for my $w (@workers) {
        $workerlist .=
        $workerno{$w}.":".$sshlogin{$w} ." / ".
            ($Global::host{$w}->ncpus() || "-")." / ".
            $Global::host{$w}->max_jobs_running()."\n";
    }
    $status = "x"x($termcols+1);
    # Select an output format that will fit on a single line
    if(length $status > $termcols) {
        # sshlogin1:XX/XX/XX%/XX.Xs sshlogin2:XX/XX/XX%/XX.Xs sshlogin3:XX/XX/XX%/XX.Xs
        $header = "Computer:jobs running/jobs completed/%of started jobs/Average seconds to complete";
        $status = $eta .
            join(" ",map
                 {
                     if($Global::total_started) {
                         my $completed = ($Global::host{$_}->jobs_completed()||0);
                         my $running = $Global::host{$_}->jobs_running();
                         my $time = $completed ? (time-$^T)/($completed) : "0";
                         sprintf("%s:%d/%d/%d%%/%.1fs ",
                                 $sshlogin{$_}, $running, $completed,
                                 ($running+$completed)*100
                                 / $Global::total_started, $time);
                     }
                 } @workers);
    }
    if(length $status > $termcols) {
        # 1:XX/XX/XX%/XX.Xs 2:XX/XX/XX%/XX.Xs 3:XX/XX/XX%/XX.Xs 4:XX/XX/XX%/XX.Xs
        $header = "Computer:jobs running/jobs completed/%of started jobs";
        $status = $eta .
            join(" ",map
                 {
                     if($Global::total_started) {
			 my $completed = ($Global::host{$_}->jobs_completed()||0);
			 my $running = $Global::host{$_}->jobs_running();
			 my $time = $completed ? (time-$^T)/($completed) : "0";
			 sprintf("%s:%d/%d/%d%%/%.1fs ",
				 $workerno{$_}, $running, $completed,
				 ($running+$completed)*100
				 / $Global::total_started, $time);
		     }
                 } @workers);
    }
    if(length $status > $termcols) {
        # sshlogin1:XX/XX/XX% sshlogin2:XX/XX/XX% sshlogin3:XX/XX/XX%
        $header = "Computer:jobs running/jobs completed/%of started jobs";
        $status = $eta .
            join(" ",map
                 {
                     if($Global::total_started) {
			 sprintf("%s:%d/%d/%d%%",
				 $sshlogin{$_},
				 $Global::host{$_}->jobs_running(),
				 ($Global::host{$_}->jobs_completed()||0),
				 ($Global::host{$_}->jobs_running()+
				  ($Global::host{$_}->jobs_completed()||0))*100
				 / $Global::total_started)
		     }
		 }
                 @workers);
    }
    if(length $status > $termcols) {
        # 1:XX/XX/XX% 2:XX/XX/XX% 3:XX/XX/XX% 4:XX/XX/XX% 5:XX/XX/XX% 6:XX/XX/XX%
        $header = "Computer:jobs running/jobs completed/%of started jobs";
        $status = $eta .
            join(" ",map
                 {
                     if($Global::total_started) {
			 sprintf("%s:%d/%d/%d%%",
				 $workerno{$_},
				 $Global::host{$_}->jobs_running(),
				 ($Global::host{$_}->jobs_completed()||0),
				 ($Global::host{$_}->jobs_running()+
				  ($Global::host{$_}->jobs_completed()||0))*100
				 / $Global::total_started)
		     }
		 }
                 @workers);
    }
    if(length $status > $termcols) {
        # sshlogin1:XX/XX/XX% sshlogin2:XX/XX/XX% sshlogin3:XX/XX sshlogin4:XX/XX
        $header = "Computer:jobs running/jobs completed";
        $status = $eta .
            join(" ",map
                       { sprintf("%s:%d/%d",
                                 $sshlogin{$_}, $Global::host{$_}->jobs_running(),
                                 ($Global::host{$_}->jobs_completed()||0)) }
                       @workers);
    }
    if(length $status > $termcols) {
        # sshlogin1:XX/XX sshlogin2:XX/XX sshlogin3:XX/XX sshlogin4:XX/XX
        $header = "Computer:jobs running/jobs completed";
        $status = $eta .
            join(" ",map
                       { sprintf("%s:%d/%d",
                                 $sshlogin{$_}, $Global::host{$_}->jobs_running(),
                                 ($Global::host{$_}->jobs_completed()||0)) }
                       @workers);
    }
    if(length $status > $termcols) {
        # 1:XX/XX 2:XX/XX 3:XX/XX 4:XX/XX 5:XX/XX 6:XX/XX
        $header = "Computer:jobs running/jobs completed";
        $status = $eta .
            join(" ",map
                       { sprintf("%s:%d/%d",
                                 $workerno{$_}, $Global::host{$_}->jobs_running(),
                                 ($Global::host{$_}->jobs_completed()||0)) }
                       @workers);
    }
    if(length $status > $termcols) {
        # sshlogin1:XX sshlogin2:XX sshlogin3:XX sshlogin4:XX sshlogin5:XX
        $header = "Computer:jobs completed";
        $status = $eta .
            join(" ",map
                       { sprintf("%s:%d",
                                 $sshlogin{$_},
                                 ($Global::host{$_}->jobs_completed()||0)) }
                       @workers);
    }
    if(length $status > $termcols) {
        # 1:XX 2:XX 3:XX 4:XX 5:XX 6:XX
        $header = "Computer:jobs completed";
        $status = $eta .
            join(" ",map
                       { sprintf("%s:%d",
                                 $workerno{$_},
                                 ($Global::host{$_}->jobs_completed()||0)) }
                       @workers);
    }
    return ("workerlist" => $workerlist, "header" => $header, "status" => $status);
}

{

    my ($first_completed, $smoothed_avg_time, $last_eta);

    sub compute_eta {
	# Calculate important numbers for ETA
	# Returns:
	#   $total = number of jobs in total
	#   $completed = number of jobs completed
	#   $left = number of jobs left
	#   $pctcomplete = percent of jobs completed
	#   $avgtime = averaged time
	#   $eta = smoothed eta
	my $completed = $Global::total_completed;
	# In rare cases with -X will $completed > total_jobs()
	my $total = ::max($Global::JobQueue->total_jobs(),$completed);
	my $left = $total - $completed;
	if(not $completed) {
	    return($total, $completed, $left, 0, 0, 0);
	}
	my $pctcomplete = ::min($completed / $total,100);
	$first_completed ||= time;
	my $timepassed = (time - $first_completed);
	my $avgtime = $timepassed / $completed;
	$smoothed_avg_time ||= $avgtime;
	# Smooth the eta so it does not jump wildly
	$smoothed_avg_time = (1 - $pctcomplete) * $smoothed_avg_time +
	    $pctcomplete * $avgtime;
	my $eta = int($left * $smoothed_avg_time);
	if($eta*0.90 < $last_eta and $last_eta < $eta) {
	    # Eta jumped less that 10% up: Keep the last eta instead
	    $eta = $last_eta;
	} else {
	    $last_eta = $eta;
	}
	return($total, $completed, $left, $pctcomplete, $avgtime, $eta);
    }
}

{
    my ($rev,$reset);

    sub bar() {
	# Return:
	#   $status = bar with eta, completed jobs, arg and pct
	$rev ||= "\033[7m";
	$reset ||= "\033[0m";
	my($total, $completed, $left, $pctcomplete, $avgtime, $eta) =
	    compute_eta();
	my $arg = $Global::newest_job ?
	    $Global::newest_job->{'commandline'}->
	    replace_placeholders(["\257<\257>"],0,0) : "";
	# These chars mess up display in the terminal
	$arg =~ tr/[\011-\016\033\302-\365]//d;
	my $eta_dhms = ::seconds_to_time_units($eta);
	my $bar_text =
	    sprintf("%d%% %d:%d=%s %s",
		    $pctcomplete*100, $completed, $left, $eta_dhms, $arg);
	my $terminal_width = terminal_columns();
	my $s = sprintf("%-${terminal_width}s",
			substr($bar_text." "x$terminal_width,
			       0,$terminal_width));
	my $width = int($terminal_width * $pctcomplete);
	substr($s,$width,0) = $reset;
	my $zenity = sprintf("%-${terminal_width}s",
			     substr("#   $eta sec $arg",
				    0,$terminal_width));
	$s = "\r" . $zenity . "\r" . $pctcomplete*100 . # Prefix with zenity header
	    "\r" . $rev . $s . $reset;
	return $s;
    }
}

{
    my ($columns,$last_column_time);

    sub terminal_columns() {
	# Get the number of columns of the terminal.
        # Only update once per second.
	# Returns:
	#   number of columns of the screen
	if(not $columns or $last_column_time < time) {
	    $last_column_time = time;
	    $columns = $ENV{'COLUMNS'};
	    if(not $columns) {
		my $stty = ::qqx("stty -a </dev/tty");
		# FreeBSD/OpenBSD/NetBSD/Dragonfly/MirOS
		# MacOSX/IRIX/AIX/Tru64
		$stty =~ /(\d+) columns/ and do { $columns = $1; };
		# GNU/Linux/Solaris
		$stty =~ /columns (\d+)/ and do { $columns = $1; };
		# Solaris-x86/HPUX/SCOsysV/UnixWare/OpenIndiana
		$stty =~ /columns = (\d+)/ and do { $columns = $1; };
		# QNX
		$stty =~ /rows=\d+,(\d+)/ and do { $columns = $1; };
	    }
	    if(not $columns) {
		my $resize = ::qqx("resize");
		$resize =~ /COLUMNS=(\d+);/ and do { $columns = $1; };
	    }
	    $columns ||= 80;
	}
	return $columns;
    }
}

# Prototype forwarding
sub get_job_with_sshlogin($);
sub get_job_with_sshlogin($) {
    # Input:
    #   $sshlogin = which host should the job be run on?
    # Uses:
    #   $opt::hostgroups
    #   $Global::JobQueue
    # Returns:
    #   $job = next job object for $sshlogin if any available
    my $sshlogin = shift;
    my $job;

    if ($opt::hostgroups) {
	my @other_hostgroup_jobs = ();

        while($job = $Global::JobQueue->get()) {
	    if($sshlogin->in_hostgroups($job->hostgroups())) {
		# Found a job to be run on a hostgroup of this
		# $sshlogin
		last;
	    } else {
		# This job was not in the hostgroups of $sshlogin
                push @other_hostgroup_jobs, $job;
            }
        }
	$Global::JobQueue->unget(@other_hostgroup_jobs);
	if(not defined $job) {
	    # No more jobs
	    return undef;
	}
    } else {
        $job = $Global::JobQueue->get();
        if(not defined $job) {
            # No more jobs
	    ::debug("start", "No more jobs: JobQueue empty\n");
            return undef;
        }
    }
    $job->set_sshlogin($sshlogin);
    if($opt::retries and $job->failed_here()) {
        # This command with these args failed for this sshlogin
        my ($no_of_failed_sshlogins,$min_failures) = $job->min_failed();
	# Only look at the Global::host that have > 0 jobslots
        if($no_of_failed_sshlogins ==
	   grep { $_->max_jobs_running() > 0 } values %Global::host
	   and $job->failed_here() == $min_failures) {
            # It failed the same or more times on another host:
            # run it on this host
        } else {
            # If it failed fewer times on another host:
            # Find another job to run
            my $nextjob;
            if(not $Global::JobQueue->empty()) {
		# This can potentially recurse for all args
                no warnings 'recursion';
                $nextjob = get_job_with_sshlogin($sshlogin);
            }
            # Push the command back on the queue
            $Global::JobQueue->unget($job);
            return $nextjob;
        }
    }
    return $job;
}


sub __REMOTE_SSH__() {}


sub read_sshloginfiles(@) {
    # Read a list of --slf's
    # Input:
    #   @files = files or symbolic file names to read
    # Returns: N/A
    for my $s (@_) {
	read_sshloginfile(expand_slf_shorthand($s));
    }
}

sub expand_slf_shorthand($) {
    # Expand --slf shorthand into a read file name
    # Input:
    #   $file = file or symbolic file name to read
    # Returns:
    #   $file = actual file name to read
    my $file = shift;
    if($file eq "-") {
	# skip: It is stdin
    } elsif($file eq "..") {
        $file = $Global::config_dir."/sshloginfile";
    } elsif($file eq ".") {
        $file = "/etc/parallel/sshloginfile";
    } elsif(not -r $file) {
	for(@Global::config_dirs) {
	    if(not -r $_."/".$file) {
		# Try prepending $PARALLEL_HOME
		::error("Cannot open $file.");
		::wait_and_exit(255);
	    } else {
		$file = $_."/".$file;
		last;
	    }
	}
    }
    return $file;
}

sub read_sshloginfile($) {
    # Read sshloginfile into @Global::sshlogin
    # Input:
    #   $file = file to read
    # Uses:
    #   @Global::sshlogin
    # Returns: N/A
    local $/ = "\n";
    my $file = shift;
    my $close = 1;
    my $in_fh;
    ::debug("init","--slf ",$file);
    if($file eq "-") {
	$in_fh = *STDIN;
	$close = 0;
    } else {
	if(not open($in_fh, "<", $file)) {
	    # Try the filename
	    ::error("Cannot open $file.");
	    ::wait_and_exit(255);
	}
    }
    while(<$in_fh>) {
        chomp;
        /^\s*#/ and next;
        /^\s*$/ and next;
        push @Global::sshlogin, $_;
    }
    if($close) {
	close $in_fh;
    }
}

sub parse_sshlogin() {
    # Parse @Global::sshlogin into %Global::host.
    # Keep only hosts that are in one of the given ssh hostgroups.
    # Uses:
    #   @Global::sshlogin
    #   $Global::minimal_command_line_length
    #   %Global::host
    #   $opt::transfer
    #   @opt::return
    #   $opt::cleanup
    #   @opt::basefile
    #   @opt::trc
    # Returns: N/A
    my @login;
    if(not @Global::sshlogin) { @Global::sshlogin = (":"); }
    for my $sshlogin (@Global::sshlogin) {
        # Split up -S sshlogin,sshlogin
        for my $s (split /,|\n/, $sshlogin) {
            if ($s eq ".." or $s eq "-") {
		# This may add to @Global::sshlogin - possibly bug
		read_sshloginfile(expand_slf_shorthand($s));
            } else {
		$s =~ s/\s*$//;
                push (@login, $s);
            }
        }
    }
    $Global::minimal_command_line_length = 100_000_000;
    my @allowed_hostgroups;
    for my $ncpu_sshlogin_string (::uniq(@login)) {
	my $sshlogin = SSHLogin->new($ncpu_sshlogin_string);
	my $sshlogin_string = $sshlogin->string();
	if($sshlogin_string eq "") {
	    # This is an ssh group: -S @webservers
	    push @allowed_hostgroups, $sshlogin->hostgroups();
	    next;
	}
	if($Global::host{$sshlogin_string}) {
	    # This sshlogin has already been added:
	    # It is probably a host that has come back
	    # Set the max_jobs_running back to the original
	    debug("run","Already seen $sshlogin_string\n");
	    if($sshlogin->{'ncpus'}) {
		# If ncpus set by '#/' of the sshlogin, overwrite it:
		$Global::host{$sshlogin_string}->set_ncpus($sshlogin->ncpus());
	    }
	    $Global::host{$sshlogin_string}->set_max_jobs_running(undef);
	    next;
	}
	$sshlogin->set_maxlength(Limits::Command::max_length());

	$Global::minimal_command_line_length =
	    ::min($Global::minimal_command_line_length, $sshlogin->maxlength());
        $Global::host{$sshlogin_string} = $sshlogin;
    }
    if(@allowed_hostgroups) {
	# Remove hosts that are not in these groups
	while (my ($string, $sshlogin) = each %Global::host) {
	    if(not $sshlogin->in_hostgroups(@allowed_hostgroups)) {
		delete $Global::host{$string};
	    }
	}
    }

    # debug("start", "sshlogin: ", my_dump(%Global::host),"\n");
    if(@Global::transfer_files or @opt::return or $opt::cleanup or @opt::basefile) {
        if(not remote_hosts()) {
            # There are no remote hosts
            if(@opt::trc) {
		::warning("--trc ignored as there are no remote --sshlogin.");
            } elsif (defined $opt::transfer) {
		::warning("--transfer ignored as there are no remote --sshlogin.");
            } elsif (@opt::transfer_files) {
		::warning("--transferfile ignored as there are no remote --sshlogin.");
            } elsif (@opt::return) {
                ::warning("--return ignored as there are no remote --sshlogin.");
            } elsif (defined $opt::cleanup) {
		::warning("--cleanup ignored as there are no remote --sshlogin.");
            } elsif (@opt::basefile) {
                ::warning("--basefile ignored as there are no remote --sshlogin.");
            }
        }
    }
}

sub remote_hosts() {
    # Return sshlogins that are not ':'
    # Uses:
    #   %Global::host
    # Returns:
    #   list of sshlogins with ':' removed
    return grep !/^:$/, keys %Global::host;
}

sub setup_basefile() {
    # Transfer basefiles to each $sshlogin
    # This needs to be done before first jobs on $sshlogin is run
    # Uses:
    #   %Global::host
    #   @opt::basefile
    # Returns: N/A
    my @cmd;
    my $rsync_destdir;
    my $workdir;
    for my $sshlogin (values %Global::host) {
      if($sshlogin->string() eq ":") { next }
      for my $file (@opt::basefile) {
	if($file !~ m:^/: and $opt::workdir eq "...") {
	  ::error("Work dir '...' will not work with relative basefiles.");
	  ::wait_and_exit(255);
	}
	if(not $workdir) {
	    my $dummycmdline = CommandLine->new(1,["true"],{},0,0,[],[],{},{},{});
	    my $dummyjob = Job->new($dummycmdline);
	    $workdir = $dummyjob->workdir();
	}
	push @cmd, $sshlogin->rsync_transfer_cmd($file,$workdir);
      }
    }
    debug("init", "basesetup: @cmd\n");
    my ($exitstatus,$stdout_ref,$stderr_ref) =
	run_parallel((join "\n",@cmd),"-j0","--retries",5);
    if($exitstatus) {
	my @stdout = @$stdout_ref;
	my @stderr = @$stderr_ref;
	::error("Copying of --basefile failed: @stdout@stderr");
	::wait_and_exit(255);
    }
}

sub cleanup_basefile() {
    # Remove the basefiles transferred
    # Uses:
    #   %Global::host
    #   @opt::basefile
    # Returns: N/A
    my @cmd;
    my $workdir;
    if(not $workdir) {
	my $dummycmdline = CommandLine->new(1,"true",0,0,0,0,0,{},{},{});
	my $dummyjob = Job->new($dummycmdline);
	$workdir = $dummyjob->workdir();
    }
    for my $sshlogin (values %Global::host) {
        if($sshlogin->string() eq ":") { next }
        for my $file (@opt::basefile) {
	    push @cmd, $sshlogin->cleanup_cmd($file,$workdir);
        }
    }
    debug("init", "basecleanup: @cmd\n");
    my ($exitstatus,$stdout_ref,$stderr_ref) =
	run_parallel(join("\n",@cmd),"-j0","--retries",5);
    if($exitstatus) {
	my @stdout = @$stdout_ref;
	my @stderr = @$stderr_ref;
	::error("Cleanup of --basefile failed: @stdout@stderr");
	::wait_and_exit(255);
    }
}

sub run_parallel() {
    my ($stdin,@args) = @_;
    my $cmd = join "",map { " $_ & " } split /\n/, $stdin;
    print $Global::original_stderr ` $cmd wait` ;
    return 0
}

sub _run_parallel() {
    # Run Parallel
    # This should ideally just fork an internal copy
    # and not start it through a shell
    # Input:
    #   $stdin = data to provide on stdin for Parallel
    #   @args = command line arguments
    # Returns:
    #   $exitstatus = exitcode of Parallel run
    #   \@stdout = standard output
    #   \@stderr = standard error
    my ($stdin,@args) = @_;
    my ($exitstatus,@stdout,@stderr);
    my ($stdin_fh,$stdout_fh)=(gensym(),gensym());
    my ($stderr_fh, $stderrname) = ::tmpfile(SUFFIX => ".par");
    unlink $stderrname;

    my $pid = ::open3($stdin_fh,$stdout_fh,$stderr_fh,
		      $0,qw(--plain --shell /bin/sh --will-cite), @args);
    if(my $writerpid = fork()) {
	close $stdin_fh;
	@stdout = <$stdout_fh>;
	# Now stdout is closed:
	# These pids should be dead or die very soon
	while(kill 0, $writerpid) { ::usleep(1); }
	die;
#	reap $writerpid;
#	while(kill 0, $pid) { ::usleep(1); }
#	reap $writerpid;
	$exitstatus = $?;
	seek $stderr_fh, 0, 0;
	@stderr = <$stderr_fh>;
	close $stdout_fh;
	close $stderr_fh;
    } else {
	close $stdout_fh;
	close $stderr_fh;
	print $stdin_fh $stdin;
	close $stdin_fh;
	exit(0);
    }
    return ($exitstatus,\@stdout,\@stderr);
}

sub filter_hosts() {
    # Remove down --sshlogins from active duty.
    # Find ncpus, ncores, maxlen, time-to-login for each host.
    # Uses:
    #   %Global::host
    #   $Global::minimal_command_line_length
    #   $opt::use_sockets_instead_of_threads
    #   $opt::use_cores_instead_of_threads
    #   $opt::use_cpus_instead_of_cores
    # Returns: N/A

    my ($nsockets_ref,$ncores_ref, $nthreads_ref, $time_to_login_ref,
	$maxlen_ref, $echo_ref, $down_hosts_ref) =
	parse_host_filtering(parallelized_host_filtering());

    delete @Global::host{@$down_hosts_ref};
    @$down_hosts_ref and ::warning("Removed @$down_hosts_ref.");

    $Global::minimal_command_line_length = 100_000_000;
    while (my ($sshlogin, $obj) = each %Global::host) {
	if($sshlogin eq ":") { next }
	$nsockets_ref->{$sshlogin} or
	    ::die_bug("nsockets missing: ".$obj->serverlogin());
	$ncores_ref->{$sshlogin} or
	    ::die_bug("ncores missing: ".$obj->serverlogin());
	$nthreads_ref->{$sshlogin} or
	    ::die_bug("nthreads missing: ".$obj->serverlogin());
	$time_to_login_ref->{$sshlogin} or
	    ::die_bug("time_to_login missing: ".$obj->serverlogin());
	$maxlen_ref->{$sshlogin} or
	    ::die_bug("maxlen missing: ".$obj->serverlogin());
	$obj->set_ncpus($nthreads_ref->{$sshlogin});
	if($opt::use_cpus_instead_of_cores) {
	    $obj->set_ncpus($ncores_ref->{$sshlogin});
	} elsif($opt::use_sockets_instead_of_threads) {
	    $obj->set_ncpus($nsockets_ref->{$sshlogin});
	} elsif($opt::use_cores_instead_of_threads) {
	    $obj->set_ncpus($ncores_ref->{$sshlogin});
	}
	$obj->set_time_to_login($time_to_login_ref->{$sshlogin});
        $obj->set_maxlength($maxlen_ref->{$sshlogin});
	$Global::minimal_command_line_length =
	    ::min($Global::minimal_command_line_length,
		  int($maxlen_ref->{$sshlogin}/2));
	::debug("init", "Timing from -S:$sshlogin ",
		" nsockets:",$nsockets_ref->{$sshlogin},
		" ncores:", $ncores_ref->{$sshlogin},
		" nthreads:",$nthreads_ref->{$sshlogin},
		" time_to_login:", $time_to_login_ref->{$sshlogin},
		" maxlen:", $maxlen_ref->{$sshlogin},
		" min_max_len:", $Global::minimal_command_line_length,"\n");
    }
}

sub parse_host_filtering() {
    # Input:
    #   @lines = output from parallelized_host_filtering()
    # Returns:
    #   \%nsockets = number of sockets of {host}
    #   \%ncores = number of cores of {host}
    #   \%nthreads = number of hyperthreaded cores of {host}
    #   \%time_to_login = time_to_login on {host}
    #   \%maxlen = max command len on {host}
    #   \%echo = echo received from {host}
    #   \@down_hosts = list of hosts with no answer
    local $/ = "\n";
    my (%nsockets, %ncores, %nthreads, %time_to_login, %maxlen, %echo,
	@down_hosts);
    for (@_) {
	::debug("init","Read: ",$_);
	chomp;
	my @col = split /\t/, $_;
	if($col[0] =~ /^parallel: Warning:/) {
	    # Timed out job: Ignore it
	    next;
	} elsif(defined $col[6]) {
	    # This is a line from --joblog
	    # seq host time spent sent received exit signal command
	    # 2 : 1372607672.654 0.675 0 0 0 0 eval true\ m\;ssh\ m\ parallel\ --number-of-cores
	    if($col[0] eq "Seq" and $col[1] eq "Host" and
		    $col[2] eq "Starttime") {
		# Header => skip
		next;
	    }
	    # Get server from: eval true server\;
	    $col[8] =~ /eval .?true.?\s([^\;]+);/ or
		::die_bug("col8 does not contain host: $col[8]");
	    my $host = $1;
	    $host =~ tr/\\//d;
	    $Global::host{$host} or next;
	    if($col[6] eq "255" or $col[6] eq "-1" or $col[6] eq "1") {
		# exit == 255 or exit == timeout (-1): ssh failed/timedout
		# exit == 1: lsh failed
		# Remove sshlogin
		::debug("init", "--filtered $host\n");
		push(@down_hosts, $host);
	    } elsif($col[6] eq "127") {
		# signal == 127: parallel not installed remote
		# Set nsockets, ncores, nthreads = 1
		::warning("Could not figure out ".
			  "number of cpus on $host. Using 1.");
		$nsockets{$host} = 1;
		$ncores{$host} = 1;
		$nthreads{$host} = 1;
		$maxlen{$host} = Limits::Command::max_length();
	    } elsif($col[0] =~ /^\d+$/ and $Global::host{$host}) {
		# Remember how log it took to log in
		# 2 : 1372607672.654 0.675 0 0 0 0 eval true\ m\;ssh\ m\ echo
		$time_to_login{$host} = ::min($time_to_login{$host},$col[3]);
	    } else {
		::die_bug("host check unmatched long jobline: $_");
	    }
	} elsif($Global::host{$col[0]}) {
	    # This output from --number-of-cores, --number-of-cpus,
	    # --max-line-length-allowed
	    # ncores: server       8
	    # ncpus:  server       2
	    # maxlen: server       131071
	    if(/parallel: Warning: Cannot figure out number of/) {
		next;
	    }
	    if(not $nsockets{$col[0]}) {
		$nsockets{$col[0]} = $col[1];
	    } elsif(not $ncores{$col[0]}) {
		$ncores{$col[0]} = $col[1];
	    } elsif(not $nthreads{$col[0]}) {
		$nthreads{$col[0]} = $col[1];
	    } elsif(not $maxlen{$col[0]}) {
		$maxlen{$col[0]} = $col[1];
	    } elsif(not $echo{$col[0]}) {
		$echo{$col[0]} = $col[1];
	    } elsif(m/perl: warning:|LANGUAGE =|LC_ALL =|LANG =|are supported and installed/) {
		# Skip these:
		# perl: warning: Setting locale failed.
		# perl: warning: Please check that your locale settings:
		#         LANGUAGE = (unset),
		#         LC_ALL = (unset),
		#         LANG = "en_US.UTF-8"
		#     are supported and installed on your system.
		# perl: warning: Falling back to the standard locale ("C").
	    } else {
		::die_bug("host check too many col0: $_");
	    }
	} else {
	    ::die_bug("host check unmatched short jobline ($col[0]): $_");
	}
    }
    @down_hosts = uniq(@down_hosts);
    return(\%nsockets, \%ncores, \%nthreads, \%time_to_login,
	   \%maxlen, \%echo, \@down_hosts);
}

sub parallelized_host_filtering() {
    # Uses:
    #   %Global::host
    # Returns:
    #   text entries with:
    #   * joblog line
    #   * hostname \t number of cores
    #   * hostname \t number of cpus
    #   * hostname \t max-line-length-allowed
    #   * hostname \t empty

    sub sshwrapped {
	# Wrap with ssh and --env
	my $sshlogin = shift;
	my $command = shift;
	my $commandline = CommandLine->new(1,[$command],{},0,0,[],[],{},{},{});
	my $job = Job->new($commandline);
	$job->set_sshlogin($sshlogin);
	$job->wrapped();
	return($job->{'wrapped'});
    }

    my(@sockets, @cores, @threads, @maxline, @echo);
    while (my ($host, $sshlogin) = each %Global::host) {
	if($host eq ":") { next }
	# The 'true' is used to get the $host out later
	push(@sockets, $host."\t"."true $host; ".
	     sshwrapped($sshlogin,"parallel --number-of-sockets")."\n\0");
	push(@cores, $host."\t"."true $host; ".
	     sshwrapped($sshlogin,"parallel --number-of-cores")."\n\0");
	push(@threads, $host."\t"."true $host; ".
	     sshwrapped($sshlogin,"parallel --number-of-threads")."\n\0");
	push(@maxline, $host."\t"."true $host; ".
	     sshwrapped($sshlogin,"parallel --max-line-length-allowed")."\n\0");
	# 'echo' is used to get the fastest possible ssh login time
	my $sshcmd = "true $host; exec " .$sshlogin->sshcommand()." ".
	    $sshlogin->serverlogin();
	push(@echo, $host."\t".$sshcmd." -- echo\n\0");
    }

    # --timeout 10: Setting up an SSH connection and running a simple
    #               command should never take > 10 sec.
    # --delay 0.1:  If multiple sshlogins use the same proxy the delay
    #               will make it less likely to overload the ssh daemon.
    # --retries 3:  If the ssh daemon is overloaded, try 3 times
    my $cmd =
	"$0 -j0 --timeout 10 --joblog - --plain --delay 0.1 --retries 3 ".
	"--tag --tagstring '{1}' -0 --colsep '\t' -k eval '{2}' && true ";
    $cmd = $Global::shell." -c ".Q($cmd);
    ::debug("init", $cmd, "\n");
    my @out;
    my $prepend = "";

    my ($host_fh,$in,$err);
    open3($in, $host_fh, $err, $cmd) || ::die_bug("parallel host check: $cmd");
    if(not fork()) {
	# Give the commands to run to the $cmd
	close $host_fh;
	print $in @sockets, @cores, @threads, @maxline, @echo;
	close $in;
	exit();
    }
    close $in;
    for(<$host_fh>) {
	# TODO incompatible with '-quoting. Needs to be fixed differently
	#if(/\'$/) {
	#    # if last char = ' then append next line
	#    # This may be due to quoting of \n in environment var
	#    $prepend .= $_;
	#    next;
	#}
	$_ = $prepend . $_;
	$prepend = "";
	push @out, $_;
    }
    close $host_fh;
    return @out;
}

sub onall($@) {
    # Runs @command on all hosts.
    # Uses parallel to run @command on each host.
    # --jobs = number of hosts to run on simultaneously.
    # For each host a parallel command with the args will be running.
    # Uses:
    #   $Global::quoting
    #   @opt::basefile
    #   $opt::jobs
    #   $opt::linebuffer
    #   $opt::ungroup
    #   $opt::group
    #   $opt::keeporder
    #   $opt::D
    #   $opt::plain
    #   $opt::max_chars
    #   $opt::linebuffer
    #   $opt::files
    #   $opt::colsep
    #   $opt::timeout
    #   $opt::plain
    #   $opt::retries
    #   $opt::max_chars
    #   $opt::arg_sep
    #   $opt::arg_file_sep
    #   @opt::v
    #   @opt::env
    #   %Global::host
    #   $Global::exitstatus
    #   $Global::debug
    #   $Global::joblog
    #   $opt::joblog
    #   $opt::tag
    #   $opt::tee
    # Input:
    #   @command = command to run on all hosts
    # Returns: N/A
    sub tmp_joblog {
	# Input:
	#   $joblog = filename of joblog - undef if none
	# Returns:
	#   $tmpfile = temp file for joblog - undef if none
	my $joblog = shift;
	if(not defined $joblog) {
	    return undef;
	}
	my ($fh, $tmpfile) = ::tmpfile(SUFFIX => ".log");
	close $fh;
	return $tmpfile;
    }
    my ($input_source_fh_ref,@command) = @_;
    if($Global::quoting) {
       @command = shell_quote(@command);
    }

    # Copy all @input_source_fh (-a and :::) into tempfiles
    my @argfiles = ();
    for my $fh (@$input_source_fh_ref) {
	my ($outfh, $name) = ::tmpfile(SUFFIX => ".all", UNLINK => not $opt::D);
	print $outfh (<$fh>);
	close $outfh;
	push @argfiles, $name;
    }
    if(@opt::basefile) { setup_basefile(); }
    # for each sshlogin do:
    # parallel -S $sshlogin $command :::: @argfiles
    #
    # Pass some of the options to the sub-parallels, not all of them as
    # -P should only go to the first, and -S should not be copied at all.
    my $options =
	join(" ",
	     ((defined $opt::memfree) ? "--memfree ".$opt::memfree : ""),
	     ((defined $opt::D) ? "-D $opt::D" : ""),
	     ((defined $opt::group) ? "-g" : ""),
	     ((defined $opt::jobs) ? "-P $opt::jobs" : ""),
	     ((defined $opt::keeporder) ? "--keeporder" : ""),
	     ((defined $opt::linebuffer) ? "--linebuffer" : ""),
	     ((defined $opt::max_chars) ? "--max-chars ".$opt::max_chars : ""),
	     ((defined $opt::plain) ? "--plain" : ""),
	     ((defined $opt::ungroup) ? "-u" : ""),
	     ((defined $opt::tee) ? "--tee" : ""),
	);
    my $suboptions =
	join(" ",
	     ((defined $opt::D) ? "-D $opt::D" : ""),
	     ((defined $opt::arg_file_sep) ? "--arg-file-sep ".$opt::arg_file_sep : ""),
	     ((defined $opt::arg_sep) ? "--arg-sep ".$opt::arg_sep : ""),
	     ((defined $opt::colsep) ? "--colsep ".shell_quote($opt::colsep) : ""),
	     ((defined $opt::files) ? "--files" : ""),
	     ((defined $opt::group) ? "-g" : ""),
	     ((defined $opt::cleanup) ? "--cleanup" : ""),
	     ((defined $opt::keeporder) ? "--keeporder" : ""),
	     ((defined $opt::linebuffer) ? "--linebuffer" : ""),
	     ((defined $opt::max_chars) ? "--max-chars ".$opt::max_chars : ""),
	     ((defined $opt::plain) ? "--plain" : ""),
	     ((defined $opt::retries) ? "--retries ".$opt::retries : ""),
	     ((defined $opt::timeout) ? "--timeout ".$opt::timeout : ""),
	     ((defined $opt::ungroup) ? "-u" : ""),
	     ((defined $opt::tee) ? "--tee" : ""),
	     ((defined $opt::workdir) ? "--wd ".Q($opt::workdir) : ""),
	     (@Global::transfer_files ? map { "--tf ".Q($_) }
	      @Global::transfer_files : ""),
	     (@Global::ret_files ? map { "--return ".Q($_) }
	      @Global::ret_files : ""),
	     (@opt::env ? map { "--env ".Q($_) } @opt::env : ""),
	     (map { "-v" } @opt::v),
	);
    ::debug("init", "| $0 $options\n");
    open(my $parallel_fh, "|-", "$0 -0 --will-cite -j0 $options") ||
	::die_bug("This does not run Parallel: $0 $options");
    my @joblogs;
    for my $host (sort keys %Global::host) {
	my $sshlogin = $Global::host{$host};
	my $joblog = tmp_joblog($opt::joblog);
	if($joblog) {
	    push @joblogs, $joblog;
	    $joblog = "--joblog $joblog";
	}
	my $quad = $opt::arg_file_sep || "::::";
	# If PARALLEL_ENV is set: Pass it on
	my $penv=$Global::parallel_env ?
	    "PARALLEL_ENV=".Q($Global::parallel_env) :
	    '';
	::debug("init", "$penv $0 $suboptions -j1 $joblog ",
	    ((defined $opt::tag) ?
	     "--tagstring ".Q($sshlogin->string()) : ""),
	     " -S ", Q($sshlogin->string())," ",
	     join(" ",shell_quote(@command))," $quad @argfiles\n");
	print $parallel_fh "$penv $0 $suboptions -j1 $joblog ",
	    ((defined $opt::tag) ?
	     "--tagstring ".Q($sshlogin->string()) : ""),
	     " -S ", Q($sshlogin->string())," ",
	     join(" ",shell_quote(@command))," $quad @argfiles\0";
    }
    close $parallel_fh;
    $Global::exitstatus = $? >> 8;
    debug("init", "--onall exitvalue ", $?);
    if(@opt::basefile and $opt::cleanup) { cleanup_basefile(); }
    $Global::debug or unlink(@argfiles);
    my %seen;
    for my $joblog (@joblogs) {
	# Append to $joblog
	open(my $fh, "<", $joblog) || ::die_bug("Cannot open tmp joblog $joblog");
	# Skip first line (header);
	<$fh>;
	print $Global::joblog (<$fh>);
	close $fh;
	unlink($joblog);
    }
}


sub __SIGNAL_HANDLING__() {}


sub sigtstp() {
    # Send TSTP signal (Ctrl-Z) to all children process groups
    # Uses:
    #   %SIG
    # Returns: N/A
    signal_children("TSTP");
}

sub sigpipe() {
    # Send SIGPIPE signal to all children process groups
    # Uses:
    #   %SIG
    # Returns: N/A
    signal_children("PIPE");
}

sub signal_children() {
    # Send signal to all children process groups
    # and Parallel itself
    # Uses:
    #   %SIG
    # Returns: N/A
    my $signal = shift;
    debug("run", "Sending $signal ");
    kill $signal, map { -$_ } keys %Global::running;
    # Use default signal handler for Parallel itself
    $SIG{$signal} = undef;
    kill $signal, $$;
}

sub save_original_signal_handler() {
    # Remember the original signal handler
    # Uses:
    #   %Global::original_sig
    # Returns: N/A
    $SIG{INT} = sub {
	if($opt::tmux) { ::qqx("tmux kill-session -t p$$"); }
	wait_and_exit(255);
    };
    $SIG{TERM} = sub {
	if($opt::tmux) { ::qqx("tmux kill-session -t p$$"); }
	wait_and_exit(255);
    };
    %Global::original_sig = %SIG;
    $SIG{TERM} = sub {}; # Dummy until jobs really start
    $SIG{ALRM} = 'IGNORE';
    # Allow Ctrl-Z to suspend and `fg` to continue
    $SIG{TSTP} = \&sigtstp;
    $SIG{PIPE} = \&sigpipe;
    $SIG{CONT} = sub {
	# Set $SIG{TSTP} again (it is undef'ed in sigtstp() )
	$SIG{TSTP} = \&sigtstp;
	# Send continue signal to all children process groups
	kill "CONT", map { -$_ } keys %Global::running;
    };
}

sub list_running_jobs() {
    # Print running jobs on tty
    # Uses:
    #   %Global::running
    # Returns: N/A
    for my $job (values %Global::running) {
        ::status("$Global::progname: ".$job->replaced());
    }
}

sub start_no_new_jobs() {
    # Start no more jobs
    # Uses:
    #    %Global::original_sig
    #    %Global::unlink
    #    $Global::start_no_new_jobs
    # Returns: N/A
#    $SIG{TERM} = $Global::original_sig{TERM};
    unlink keys %Global::unlink;
    ::status
        ("$Global::progname: SIGHUP received. No new jobs will be started.",
         "$Global::progname: Waiting for these ".(keys %Global::running).
         " jobs to finish. Send SIGTERM to stop now.");
    list_running_jobs();
    $Global::start_no_new_jobs ||= 1;
}

sub reapers() {
    # Run reaper until there are no more left
    # Returns:
    #   @pids_reaped = pids of reaped processes
    my @pids_reaped;
    my $pid;
    while($pid = reaper()) {
	push @pids_reaped, $pid;
    }
    return @pids_reaped;
}

sub reaper() {
    # A job finished:
    # * Set exitstatus, exitsignal, endtime.
    # * Free ressources for new job
    # * Update median runtime
    # * Print output
    # * If --halt = now: Kill children
    # * Print progress
    # Uses:
    #   %Global::running
    #   $opt::timeout
    #   $Global::timeoutq
    #   $opt::keeporder
    #   $Global::total_running
    # Returns:
    #   $stiff = PID of child finished
    my $stiff;
    debug("run", "Reaper ");
    if(($stiff = waitpid(-1, &WNOHANG)) <= 0) {
	# No jobs waiting to be reaped
	return 0;
    }

    # $stiff = pid of dead process
    my $job = $Global::running{$stiff};

    # '-a <(seq 10)' will give us a pid not in %Global::running
    # The same will one of the ssh -M: ignore
    $job or return 0;
    delete $Global::running{$stiff};
    $Global::total_running--;
    if($job->{'commandline'}{'skip'}) {
	# $job->skip() was called
	$job->set_exitstatus(-2);
	$job->set_exitsignal(0);
    } else {
	$job->set_exitstatus($? >> 8);
	$job->set_exitsignal($? & 127);
    }

    debug("run", "seq ",$job->seq()," died (", $job->exitstatus(), ")");
    $job->set_endtime(::now());
    my $sshlogin = $job->sshlogin();
    $sshlogin->dec_jobs_running();
    if($job->should_be_retried()) {
	# Free up file handles
	$job->free_ressources();
    } else {
	# The job is done
	$sshlogin->inc_jobs_completed();
	# Free the jobslot
	$job->free_slot();
	if($opt::timeout and not $job->exitstatus()) {
	    # Update average runtime for timeout only for successful jobs
	    $Global::timeoutq->update_median_runtime($job->runtime());
	}
	if($opt::keeporder) {
	    $job->print_earlier_jobs();
	} else {
	    $job->print();
	}
	if($job->should_we_halt() eq "now") {
	    # Kill children
	    ::kill_sleep_seq($job->pid());
	    ::killall();
	    ::wait_and_exit($Global::halt_exitstatus);
	}
    }
    $job->cleanup();

    if($opt::progress) {
	my %progress = progress();
	::status_no_nl("\r",$progress{'status'});
    }

    debug("run", "done ");
    return $stiff;
}


sub __USAGE__() {}


sub killall() {
    # Kill all jobs by killing their process groups
    # Uses:
    #   $Global::start_no_new_jobs = we are stopping
    #   $Global::killall = Flag to not run reaper
    $Global::start_no_new_jobs ||= 1;
    # Do not reap killed children: Ignore them instead
    $Global::killall ||= 1;
    kill_sleep_seq(keys %Global::running);
}

sub kill_sleep_seq(@) {
    # Send jobs TERM,TERM,KILL to processgroups
    # Input:
    #   @pids = list of pids that are also processgroups
    # Convert pids to process groups ($processgroup = -$pid)
    my @pgrps = map { -$_ } @_;
    my @term_seq = split/,/,$opt::termseq;
    if(not @term_seq) {
	@term_seq = ("TERM",200,"TERM",100,"TERM",50,"KILL",25);
    }
    while(@term_seq) {
	@pgrps = kill_sleep(shift @term_seq, shift @term_seq, @pgrps);
    }
}

sub kill_sleep() {
    # Kill pids with a signal and wait a while for them to die
    # Input:
    #   $signal = signal to send to @pids
    #   $sleep_max = number of ms to sleep at most before returning
    #   @pids = pids to kill (actually process groups)
    # Uses:
    #   $Global::killall = set by killall() to avoid calling reaper
    # Returns:
    #   @pids = pids still alive
    my ($signal, $sleep_max, @pids) = @_;
    ::debug("kill","kill_sleep $signal ",(join " ",sort @pids),"\n");
    kill $signal, @pids;
    my $sleepsum = 0;
    my $sleep = 0.001;

    while(@pids and $sleepsum < $sleep_max) {
	if($Global::killall) {
	    # Killall => don't run reaper
	    while(waitpid(-1, &WNOHANG) > 0) {
		$sleep = $sleep/2+0.001;
	    }
	} elsif(reapers()) {
	    $sleep = $sleep/2+0.001;
	}
	$sleep *= 1.1;
	::usleep($sleep);
	$sleepsum += $sleep;
	# Keep only living children
	@pids = grep { kill(0, $_) } @pids;
    }
    return @pids;
}

sub wait_and_exit($) {
    # If we do not wait, we sometimes get segfault
    # Returns: N/A
    my $error = shift;
    unlink keys %Global::unlink;
    if($error) {
	# Kill all jobs without printing
	killall();
    }
    for (keys %Global::unkilled_children) {
	# Kill any (non-jobs) children (e.g. reserved processes)
	kill 9, $_;
        waitpid($_,0);
        delete $Global::unkilled_children{$_};
    }
    if($Global::unkilled_sqlworker) {
	waitpid($Global::unkilled_sqlworker,0);
    }
    exit($error);
}

sub die_usage() {
    # Returns: N/A
    usage();
    wait_and_exit(255);
}

sub usage() {
    # Returns: N/A
    print join
	("\n",
	 "Usage:",
	 "",
	 "$Global::progname [options] [command [arguments]] < list_of_arguments",
	 "$Global::progname [options] [command [arguments]] (::: arguments|:::: argfile(s))...",
	 "cat ... | $Global::progname --pipe [options] [command [arguments]]",
	 "",
	 "-j n            Run n jobs in parallel",
	 "-k              Keep same order",
	 "-X              Multiple arguments with context replace",
	 "--colsep regexp Split input on regexp for positional replacements",
	 "{} {.} {/} {/.} {#} {%} {= perl code =} Replacement strings",
	 "{3} {3.} {3/} {3/.} {=3 perl code =}    Positional replacement strings",
	 "With --plus:    {} = {+/}/{/} = {.}.{+.} = {+/}/{/.}.{+.} = {..}.{+..} =",
	 "                {+/}/{/..}.{+..} = {...}.{+...} = {+/}/{/...}.{+...}",
	 "",
	 "-S sshlogin     Example: foo\@server.example.com",
	 "--slf ..        Use ~/.parallel/sshloginfile as the list of sshlogins",
	 "--trc {}.bar    Shorthand for --transfer --return {}.bar --cleanup",
	 "--onall         Run the given command with argument on all sshlogins",
	 "--nonall        Run the given command with no arguments on all sshlogins",
	 "",
	 "--pipe          Split stdin (standard input) to multiple jobs.",
	 "--recend str    Record end separator for --pipe.",
	 "--recstart str  Record start separator for --pipe.",
	 "",
	 "See 'man $Global::progname' for details",
	 "",
	 "",);
}

sub status(@) {
    my @w = @_;
    my $fh = $Global::status_fd || *STDERR;
    print $fh map { ($_, "\n") } @w;
    flush $fh;
}

sub status_no_nl(@) {
    my @w = @_;
    my $fh = $Global::status_fd || *STDERR;
    print $fh @w;
    flush $fh;
}

sub warning(@) {
    my @w = @_;
    my $prog = $Global::progname || "parallel";
    status_no_nl(map { ($prog, ": Warning: ", $_, "\n"); } @w);
}

sub error(@) {
    my @w = @_;
    my $prog = $Global::progname || "parallel";
    status(map { ($prog.": Error: ". $_); } @w);
}

sub die_bug($) {
    my $bugid = shift;
    print STDERR
	("$Global::progname: This should not happen. You have found a bug.\n",
	 "Please contact <parallel\@gnu.org> and follow\n",
	 "https://www.gnu.org/software/parallel/man.html#REPORTING-BUGS\n",
	 "\n",
	 "Include this in the report:\n",
	 "* The version number: $Global::version\n",
	 "* The bugid: $bugid\n",
	 "* The command line being run\n",
	 "* The files being read (put the files on a webserver if they are big)\n",
	 "\n",
	 "If you get the error on smaller/fewer files, please include those instead.\n");
    ::wait_and_exit(255);
}

sub version() {
    # Returns: N/A
    print join
	("\n",
	 "$Global::progname $Global::version",
	 "Copyright (C) 2007-2019 Ole Tange and Free Software Foundation, Inc.",
	 "License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>",
	 "This is free software: you are free to change and redistribute it.",
	 "$Global::progname comes with no warranty.\n",
        );
}

sub show_limits() {
    # Returns: N/A
    print("Maximal size of command: ",Limits::Command::real_max_length(),"\n",
          "Maximal used size of command: ",Limits::Command::max_length(),"\n",
          "\n",
          "Execution of  will continue now, and it will try to read its input\n",
          "and run commands; if this is not what you wanted to happen, please\n",
          "press CTRL-D or CTRL-C\n");
}

sub embed() {
    # Give an embeddable version of Parallel
    # Tested with: bash, zsh, ksh, ash, dash, sh
    my $randomstring = "cut-here-".join"",
	map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..20);
    if(not -f $0 or not -r $0) {
	::error("--embed only works if parallel is a readable file");
	exit(255);
    }
    if(open(my $fh, "<", $0)) {
	# Read the source from $0
	my @source = <$fh>;
	my $user = $ENV{LOGNAME} || $ENV{USERNAME} || $ENV{USER};
	my @env_parallel_source = ();
	my $shell = $Global::shell;
	$shell =~ s:.*/::;
	for(which("env_parallel.$shell")) {
	    -r $_ or next;
	    # Read the source of env_parallel.shellname
	    open(my $env_parallel_source_fh, $_) || die;
	    @env_parallel_source = <$env_parallel_source_fh>;
	    close $env_parallel_source_fh;
	    last;
	}
	print "#!$Global::shell

# Copyright (C) 2007-2019 $user, Ole Tange and Free Software
# Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see <http://www.gnu.org/licenses/>
# or write to the Free Software Foundation, Inc., 51 Franklin St,
# Fifth Floor, Boston, MA 02110-1301 USA
";

	print q!
# Embedded Parallel created with --embed
parallel() {
    # Start Parallel without leaving temporary files
    #
    # Not all shells support 'perl <(cat ...)'
    # This is a complex way of doing:
    #   perl <(cat <<'cut-here'
    #     [...]
    #     ) "$@"
    # and also avoiding:
    #   [1]+  Done   cat

    # Make a temporary fifo that perl can read from
    _fifo_with_Parallel_source=`perl -e 'use POSIX qw(mkfifo);
      do {
        $f = "/tmp/parallel-".join"",
          map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..5);
      } while(-e $f);
      mkfifo($f,0600);
      print $f;'`
    # Put source code into temporary file
    # so it is easy to copy to the fifo
    _file_with_Parallel_source=`mktemp`;
!,
	"cat <<'$randomstring' > \$_file_with_Parallel_source\n",
	@source,
	$randomstring,"\n",
	q!
    # Copy the source code from the file to the fifo
    # and remove the file and fifo ASAP
    # 'sh -c' is needed to avoid
    #   [1]+  Done   cat
    sh -c "(rm $_file_with_Parallel_source; cat >$_fifo_with_Parallel_source; rm $_fifo_with_Parallel_source) < $_file_with_Parallel_source &"

    # Read the source from the fifo
    perl $_fifo_with_Parallel_source "$@"
}
!,
	@env_parallel_source,
	q!

# This will call the functions above
parallel -k echo ::: Put your code here
env_parallel --session
env_parallel -k echo ::: Put your code here
parset p,y,c,h -k echo ::: Put your code here
echo $p $y $c $h
!;
    } else {
	::error("Cannot open $0");
	exit(255);
    }
    ::status("Redirect the output to a file and add your changes at the end:",
	"  $0 --embed > new_script");
}


sub __GENERIC_COMMON_FUNCTION__() {}


sub mkdir_or_die($) {
    # If dir is not executable: die
    my $dir = shift;
    # The eval is needed to catch exception from mkdir
    eval { File::Path::mkpath($dir); };
    if(not -x $dir) {
	::error("Cannot change into non-executable dir $dir: $!");
	::wait_and_exit(255);
    }
}

sub tmpfile(@) {
    # Create tempfile as $TMPDIR/parXXXXX
    # Returns:
    #   $filehandle = opened file handle
    #   $filename = file name created
    my($filehandle,$filename) =
	::tempfile(DIR=>$ENV{'TMPDIR'}, TEMPLATE => 'parXXXXX', @_);
    if(wantarray) {
	return($filehandle,$filename);
    } else {
	# Separate unlink due to NFS dealing badly with File::Temp
	unlink $filename;
	return $filehandle;
    }
}

sub tmpname($) {
    # Select a name that does not exist
    # Do not create the file as it may be used for creating a socket (by tmux)
    # Remember the name in $Global::unlink to avoid hitting the same name twice
    my $name = shift;
    my($tmpname);
    if(not -w $ENV{'TMPDIR'}) {
	if(not -e $ENV{'TMPDIR'}) {
	    ::error("Tmpdir '$ENV{'TMPDIR'}' does not exist.","Try 'mkdir $ENV{'TMPDIR'}'");
	} else {
	    ::error("Tmpdir '$ENV{'TMPDIR'}' is not writable.","Try 'chmod +w $ENV{'TMPDIR'}'");
	}
	::wait_and_exit(255);
    }
    do {
	$tmpname = $ENV{'TMPDIR'}."/".$name.
	    join"", map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..5);
    } while(-e $tmpname or $Global::unlink{$tmpname}++);
    return $tmpname;
}

sub tmpfifo() {
    # Find an unused name and mkfifo on it
    my $tmpfifo = tmpname("fif");
    mkfifo($tmpfifo,0600);
    return $tmpfifo;
}

sub rm(@) {
    # Remove file and remove it from %Global::unlink
    # Uses:
    #   %Global::unlink
    delete @Global::unlink{@_};
    unlink @_;
}

sub size_of_block_dev() {
    # Like -s but for block devices
    # Input:
    #   $blockdev = file name of block device
    # Returns:
    #   $size = in bytes, undef if error
    my $blockdev = shift;
    if(open(my $fh, "<", $blockdev)) {
	seek($fh,0,2) || ::die_bug("cannot seek $blockdev");
	my $size = tell($fh);
	close $fh;
	return $size;
    } else {
	::error("cannot open $blockdev");
	wait_and_exit(255);
    }
}

sub qqx(@) {
    # Like qx but with clean environment (except for @keep)
    # and STDERR ignored
    # This is needed if the environment contains functions
    # that /bin/sh does not understand
    my $PATH = $ENV{'PATH'};
    my %env;
    # ssh with ssh-agent needs PATH SSH_AUTH_SOCK SSH_AGENT_PID
    # ssh with Kerberos needs KRB5CCNAME
    # tmux needs LC_CTYPE
    my @keep = qw(PATH SSH_AUTH_SOCK SSH_AGENT_PID KRB5CCNAME LC_CTYPE);
    @env{@keep} = @ENV{@keep};
    local %ENV;
    %ENV = %env;
    if($Global::debug) {
	return qx{ @_ && true };
    } else {
	return qx{ ( @_ ) 2>/dev/null };
    }
}

sub uniq(@) {
    # Remove duplicates and return unique values
    return keys %{{ map { $_ => 1 } @_ }};
}

sub min(@) {
    # Returns:
    #   Minimum value of array
    my $min;
    for (@_) {
        # Skip undefs
        defined $_ or next;
        defined $min or do { $min = $_; next; }; # Set $_ to the first non-undef
        $min = ($min < $_) ? $min : $_;
    }
    return $min;
}

sub max(@) {
    # Returns:
    #   Maximum value of array
    my $max;
    for (@_) {
        # Skip undefs
        defined $_ or next;
        defined $max or do { $max = $_; next; }; # Set $_ to the first non-undef
        $max = ($max > $_) ? $max : $_;
    }
    return $max;
}

sub sum() {
    # Returns:
    #   Sum of values of array
    my @args = @_;
    my $sum = 0;
    for (@args) {
        # Skip undefs
        $_ and do { $sum += $_; }
    }
    return $sum;
}

sub undef_as_zero($) {
    my $a = shift;
    return $a ? $a : 0;
}

sub undef_as_empty($) {
    my $a = shift;
    return $a ? $a : "";
}

sub undef_if_empty($) {
    if(defined($_[0]) and $_[0] eq "") {
	return undef;
    }
    return $_[0];
}

sub multiply_binary_prefix(@) {
    # Evalualte numbers with binary prefix
    # Ki=2^10, Mi=2^20, Gi=2^30, Ti=2^40, Pi=2^50, Ei=2^70, Zi=2^80, Yi=2^80
    # ki=2^10, mi=2^20, gi=2^30, ti=2^40, pi=2^50, ei=2^70, zi=2^80, yi=2^80
    # K =2^10, M =2^20, G =2^30, T =2^40, P =2^50, E =2^70, Z =2^80, Y =2^80
    # k =10^3, m =10^6, g =10^9, t=10^12, p=10^15, e=10^18, z=10^21, y=10^24
    # 13G = 13*1024*1024*1024 = 13958643712
    # Input:
    #   $s = string with prefixes
    # Returns:
    #   $value = int with prefixes multiplied
    my @v = @_;
    for(@v) {
	defined $_ or next;
	s/ki/*1024/gi;
	s/mi/*1024*1024/gi;
	s/gi/*1024*1024*1024/gi;
	s/ti/*1024*1024*1024*1024/gi;
	s/pi/*1024*1024*1024*1024*1024/gi;
	s/ei/*1024*1024*1024*1024*1024*1024/gi;
	s/zi/*1024*1024*1024*1024*1024*1024*1024/gi;
	s/yi/*1024*1024*1024*1024*1024*1024*1024*1024/gi;
	s/xi/*1024*1024*1024*1024*1024*1024*1024*1024*1024/gi;

	s/K/*1024/g;
	s/M/*1024*1024/g;
	s/G/*1024*1024*1024/g;
	s/T/*1024*1024*1024*1024/g;
	s/P/*1024*1024*1024*1024*1024/g;
	s/E/*1024*1024*1024*1024*1024*1024/g;
	s/Z/*1024*1024*1024*1024*1024*1024*1024/g;
	s/Y/*1024*1024*1024*1024*1024*1024*1024*1024/g;
	s/X/*1024*1024*1024*1024*1024*1024*1024*1024*1024/g;

	s/k/*1000/g;
	s/m/*1000*1000/g;
	s/g/*1000*1000*1000/g;
	s/t/*1000*1000*1000*1000/g;
	s/p/*1000*1000*1000*1000*1000/g;
	s/e/*1000*1000*1000*1000*1000*1000/g;
	s/z/*1000*1000*1000*1000*1000*1000*1000/g;
	s/y/*1000*1000*1000*1000*1000*1000*1000*1000/g;
	s/x/*1000*1000*1000*1000*1000*1000*1000*1000*1000/g;

	$_ = eval $_;
    }
    return wantarray ? @v : $v[0];
}

sub multiply_time_units($) {
    # Evalualte numbers with time units
    # s=1, m=60, h=3600, d=86400
    # Input:
    #   $s = string time units
    # Returns:
    #   $value = int in seconds
    my @v = @_;
    for(@v) {
	defined $_ or next;
	if(/[dhms]/i) {
	    s/s/*1+/gi;
	    s/m/*60+/gi;
	    s/h/*3600+/gi;
	    s/d/*86400+/gi;
	    $_ = eval $_."0";
	}
    }
    return wantarray ? @v : $v[0];
}

sub seconds_to_time_units() {
    # Convert seconds into ??d??h??m??s
    # s=1, m=60, h=3600, d=86400
    # Input:
    #   $s = int in seconds
    # Returns:
    #   $str = string time units
    my $s = shift;
    my $str;
    my $d = int($s/86400);
    $s -= $d * 86400;
    my $h = int($s/3600);
    $s -= $h * 3600;
    my $m = int($s/60);
    $s -= $m * 60;
    if($d) {
	$str = sprintf("%dd%02dh%02dm%02ds",$d,$h,$m,$s);
    } elsif($h) {
	$str = sprintf("%dh%02dm%02ds",$h,$m,$s);
    } elsif($m) {
	$str = sprintf("%dm%02ds",$m,$s);
    } else {
	$str = sprintf("%ds",$s);
    }
    return $str;
}

{
    my ($disk_full_fh, $b8193, $error_printed);
    sub exit_if_disk_full() {
	# Checks if $TMPDIR is full by writing 8kb to a tmpfile
	# If the disk is full: Exit immediately.
	# Returns:
	#   N/A
	if(not $disk_full_fh) {
	    $disk_full_fh = ::tmpfile(SUFFIX => ".df");
	    $b8193 = "x"x8193;
	}
	# Linux does not discover if a disk is full if writing <= 8192
	# Tested on:
	# bfs btrfs cramfs ext2 ext3 ext4 ext4dev jffs2 jfs minix msdos
	# ntfs reiserfs tmpfs ubifs vfat xfs
	# TODO this should be tested on different OS similar to this:
	#
	# doit() {
	#   sudo mount /dev/ram0 /mnt/loop; sudo chmod 1777 /mnt/loop
	#   seq 100000 | parallel --tmpdir /mnt/loop/ true &
	#   seq 6900000 > /mnt/loop/i && echo seq OK
	#   seq 6980868 > /mnt/loop/i
	#   seq 10000 > /mnt/loop/ii
	#   sleep 3
	#   sudo umount /mnt/loop/ || sudo umount -l /mnt/loop/
	#   echo >&2
	# }
	print $disk_full_fh $b8193;
	if(not $disk_full_fh
	   or
	   tell $disk_full_fh != 8193) {
	    # On raspbian the disk can be full except for 10 chars.
	    if(not $error_printed) {
		::error("Output is incomplete.",
			"Cannot append to buffer file in $ENV{'TMPDIR'}.",
			"Is the disk full?",
			"Change \$TMPDIR with --tmpdir or use --compress.");
		$error_printed = 1;
	    }
	    ::wait_and_exit(255);
	}
	truncate $disk_full_fh, 0;
	seek($disk_full_fh, 0, 0) || die;
    }
}

sub spacefree($$) {
    # Remove comments and spaces
    # Inputs:
    #   $spaces = keep 1 space?
    #   $s = string to remove spaces from
    # Returns:
    #   $s = with spaces removed
    my $spaces = shift;
    my $s = shift;
    $s =~ s/#.*//mg;
    if(1 == $spaces) {
	$s =~ s/\s+/ /mg;
    } elsif(2 == $spaces) {
	# Keep newlines
	$s =~ s/\n\n+/\n/sg;
	$s =~ s/[ \t]+/ /mg;
    } elsif(3 == $spaces) {
	# Keep perl code required space
	$s =~ s{([^a-zA-Z0-9/])\s+}{$1}sg;
	$s =~ s{([a-zA-Z0-9/])\s+([^:a-zA-Z0-9/])}{$1$2}sg;
    } else {
	$s =~ s/\s//mg;
    }
    return $s;
}

{
    my $hostname;
    sub hostname() {
	local $/ = "\n";
	if(not $hostname) {
	    $hostname = `hostname`;
	    chomp($hostname);
	    $hostname ||= "nohostname";
	}
	return $hostname;
    }
}

sub which(@) {
    # Input:
    #   @programs = programs to find the path to
    # Returns:
    #   @full_path = full paths to @programs. Nothing if not found
    my @which;
    ::debug("which", "@_ in $ENV{'PATH'}\n");
    for my $prg (@_) {
	push(@which, grep { not -d $_ and -x $_ }
	     map { $_."/".$prg } split(":",$ENV{'PATH'}));
	if($prg =~ m:/:) {
	    # Including path
	    push(@which, grep { not -d $_ and -x $_ } $prg);
	}
    }
    return wantarray ? @which : $which[0];
}

{
    my ($regexp,$shell,%fakename);

    sub parent_shell {
	# Input:
	#   $pid = pid to see if (grand)*parent is a shell
	# Returns:
	#   $shellpath = path to shell - undef if no shell found
	my $pid = shift;
	::debug("init","Parent of $pid\n");
	if(not $regexp) {
	    # All shells known to mankind
	    #
	    # ash bash csh dash fdsh fish fizsh ksh ksh93 mksh pdksh
	    # posh rbash rc rush rzsh sash sh static-sh tcsh yash zsh

	    my @shells = (qw(ash bash bsd-csh csh dash fdsh fish fizsh
	    ksh ksh93 lksh mksh pdksh posh rbash rc rush rzsh sash sh
	    static-sh tcsh yash zsh -sh -csh -bash),
			  '-sh (sh)' # sh on FreeBSD
		);
	    # Can be formatted as:
	    #   [sh]  -sh  sh  busybox sh  -sh (sh)
	    #   /bin/sh /sbin/sh /opt/csw/sh
	    # But not: foo.sh sshd crash flush pdflush scosh fsflush ssh
	    $shell = "(?:".join("|",map { "\Q$_\E" } @shells).")";
	    $regexp = '^((\[)(-?)('. $shell. ')(\])|(|\S+/|busybox )'.
		'(-?)('. $shell. '))( *$| [^(])';
	    %fakename = (
		# sh disguises itself as -sh (sh) on FreeBSD
		"-sh (sh)" => ["sh"],
		# csh and tcsh disguise themselves as -sh/-csh
		# E.g.: ssh -tt csh@lo 'ps aux;true' |egrep ^csh
		# but sh also disguises itself as -sh
		# (TODO When does that happen?)
		"-sh" => ["sh"],
		"-csh" => ["tcsh", "csh"],
		# ash disguises itself as -ash
		"-ash" => ["ash", "dash", "sh"],
		# dash disguises itself as -dash
		"-dash" => ["dash", "ash", "sh"],
		# bash disguises itself as -bash
		"-bash" => ["bash", "sh"],
		# ksh disguises itself as -ksh
		"-ksh" => ["ksh", "sh"],
		# zsh disguises itself as -zsh
		"-zsh" => ["zsh", "sh"],
		);
	}
	if($^O eq "linux") {
	    # Optimized for GNU/Linux
	    my $testpid = $pid;
	    my $shellpath;
	    my $shellline;
	    while($testpid) {
		if(open(my $fd, "<", "/proc/$testpid/cmdline")) {
		    local $/="\0";
		    chomp($shellline = <$fd>);
		    if($shellline =~ /$regexp/o) {
			my $shellname = $4 || $8;
			my $dash = $3 || $7;
			if($shellname eq "sh" and $dash) {
			    # -sh => csh or sh
			    if($shellpath = readlink "/proc/$testpid/exe") {
				::debug("init","procpath $shellpath\n");
				if($shellpath =~ m:/$shell$:o) {
				    ::debug("init", "proc which ".$shellpath." => ");
				    return $shellpath;
				}
			    }
			}
			::debug("init", "which ".$shellname." => ");
			$shellpath = (which($shellname,@{$fakename{$shellname}}))[0];
			::debug("init", "shell path $shellpath\n");
			return $shellpath;
		    }
		}
		# Get parent pid
		if(open(my $fd, "<", "/proc/$testpid/stat")) {
		    my $line = <$fd>;
		    close $fd;
		    # Parent pid is field 4
		    $testpid = (split /\s+/, $line)[3];
		} else {
		    # Something is wrong: fall back to old method
		    last;
		}
	    }
	}
	# if -sh or -csh try readlink /proc/$$/exe
	my ($children_of_ref, $parent_of_ref, $name_of_ref) = pid_table();
	my $shellpath;
	my $testpid = $pid;
	while($testpid) {
	    if($name_of_ref->{$testpid} =~ /$regexp/o) {
		my $shellname = $4 || $8;
		my $dash = $3 || $7;
		if($shellname eq "sh" and $dash) {
		    # -sh => csh or sh
		    if($shellpath = readlink "/proc/$testpid/exe") {
			::debug("init","procpath $shellpath\n");
			if($shellpath =~ m:/$shell$:o) {
			    ::debug("init", "proc which ".$shellpath." => ");
			    return $shellpath;
			}
		    }
		}
		::debug("init", "which ".$shellname." => ");
		$shellpath = (which($shellname,@{$fakename{$shellname}}))[0];
		::debug("init", "shell path $shellpath\n");
		$shellpath and last;
	    }
	    if($testpid == $parent_of_ref->{$testpid}) {
		# In Solaris zones, the PPID of the zsched process is itself
		last;
	    }
	    $testpid = $parent_of_ref->{$testpid};
	}
	return $shellpath;
    }
}

{
    my %pid_parentpid_cmd;

    sub pid_table() {
	# Returns:
	#   %children_of = { pid -> children of pid }
	#   %parent_of = { pid -> pid of parent }
	#   %name_of = { pid -> commandname }

       	if(not %pid_parentpid_cmd) {
	    # Filter for SysV-style `ps`
	    my $sysv = q( ps -ef | perl -ane '1..1 and /^(.*)CO?MM?A?N?D/ and $s=length $1;).
		q(s/^.{$s}//; print "@F[1,2] $_"' );
	    # Minix uses cols 2,3 and can have newlines in the command
	    # so lines not having numbers in cols 2,3 must be ignored
	    my $minix = q( ps -ef | perl -ane '1..1 and /^(.*)CO?MM?A?N?D/ and $s=length $1;).
		q(s/^.{$s}// and $F[2]>0 and $F[3]>0 and print "@F[2,3] $_"' );
	    # BSD-style `ps`
	    my $bsd = q(ps -o pid,ppid,command -ax);
	    %pid_parentpid_cmd =
	    (
	     'aix' => $sysv,
	     'android' => $sysv,
	     'cygwin' => $sysv,
	     'darwin' => $bsd,
	     'dec_osf' => $sysv,
	     'dragonfly' => $bsd,
	     'freebsd' => $bsd,
	     'gnu' => $sysv,
	     'hpux' => $sysv,
	     'linux' => $sysv,
	     'mirbsd' => $bsd,
	     'minix' => $minix,
	     'msys' => $sysv,
	     'MSWin32' => $sysv,
	     'netbsd' => $bsd,
	     'nto' => $sysv,
	     'openbsd' => $bsd,
	     'solaris' => $sysv,
	     'svr5' => $sysv,
	     'syllable' => "echo ps not supported",
	    );
	}
	$pid_parentpid_cmd{$^O} or ::die_bug("pid_parentpid_cmd for $^O missing");

	my (@pidtable,%parent_of,%children_of,%name_of);
	# Table with pid -> children of pid
	@pidtable = `$pid_parentpid_cmd{$^O}`;
	my $p=$$;
	for (@pidtable) {
	    # must match: 24436 21224 busybox ash
	    # must match: 24436 21224 <<empty on MacOSX running cubase>>
	    # must match: 24436 21224 <<empty on system running Viber>>
	    #   or: perl -e 'while($0=" "){}'
	    if(/^\s*(\S+)\s+(\S+)\s+(\S+.*)/
	       or
	       /^\s*(\S+)\s+(\S+)\s+()$/) {
		$parent_of{$1} = $2;
		push @{$children_of{$2}}, $1;
		$name_of{$1} = $3;
	    } else {
		::die_bug("pidtable format: $_");
	    }
	}
	return(\%children_of, \%parent_of, \%name_of);
    }
}

sub now() {
    # Returns time since epoch as in seconds with 3 decimals
    # Uses:
    #   @Global::use
    # Returns:
    #   $time = time now with millisecond accuracy
    if(not $Global::use{"Time::HiRes"}) {
	if(eval "use Time::HiRes qw ( time );") {
	    eval "sub TimeHiRestime { return Time::HiRes::time };";
	} else {
	    eval "sub TimeHiRestime { return time() };";
	}
	$Global::use{"Time::HiRes"} = 1;
    }

    return (int(TimeHiRestime()*1000))/1000;
}

sub usleep($) {
    # Sleep this many milliseconds.
    # Input:
    #   $ms = milliseconds to sleep
    my $ms = shift;
    ::debug("timing",int($ms),"ms ");
    select(undef, undef, undef, $ms/1000);
}

sub __KILLER_REAPER__() {}

sub reap_usleep() {
    # Reap dead children.
    # If no dead children: Sleep specified amount with exponential backoff
    # Input:
    #   $ms = milliseconds to sleep
    # Returns:
    #   $ms/2+0.001 if children reaped
    #   $ms*1.1 if no children reaped
    my $ms = shift;
    if(reapers()) {
	if(not $Global::total_completed % 100) {
	    if($opt::timeout) {
		# Force cleaning the timeout queue for every 100 jobs
		# Fixes potential memleak
		$Global::timeoutq->process_timeouts();
	    }
	}
	# Sleep exponentially shorter (1/2^n) if a job finished
	return $ms/2+0.001;
    } else {
	if($opt::timeout) {
	    $Global::timeoutq->process_timeouts();
	}
	if($opt::memfree) {
	    kill_youngster_if_not_enough_mem();
	}
	if($opt::limit) {
	    kill_youngest_if_over_limit();
	}
	exit_if_disk_full();
	if($opt::linebuffer) {
	    my $something_printed = 0;
	    if($opt::keeporder) {
		for my $job (values %Global::running) {
		    $something_printed += $job->print_earlier_jobs();
		}
	    } else {
		for my $job (values %Global::running) {
		    $something_printed += $job->print();
		}
	    }
	    if($something_printed) {
		$ms = $ms/2+0.001;
	    }
	}
	if($ms > 0.002) {
	    # When a child dies, wake up from sleep (or select(,,,))
	    $SIG{CHLD} = sub { kill "ALRM", $$ };
	    if($opt::delay) {
		# The 0.004s is approximately the time it takes for one round
		usleep(1000*($Global::newest_starttime +
			     $opt::delay - 0.004 - ::now()));
	    } else {
		usleep($ms);
	    }
	    # --compress needs $SIG{CHLD} unset
	    $SIG{CHLD} = 'DEFAULT';
	}
	# Sleep exponentially longer (1.1^n) if a job did not finish,
	# though at most 1000 ms.
	return (($ms < 1000) ? ($ms * 1.1) : ($ms));
    }
}

sub kill_youngest_if_over_limit() {
    # Check each $sshlogin we are over limit
    # If over limit: kill off the youngest child
    # Put the child back in the queue.
    # Uses:
    #   %Global::running
    my %jobs_of;
    my @sshlogins;

    for my $job (values %Global::running) {
	if(not $jobs_of{$job->sshlogin()}) {
	    push @sshlogins, $job->sshlogin();
	}
	push @{$jobs_of{$job->sshlogin()}}, $job;
    }
    for my $sshlogin (@sshlogins) {
	for my $job (sort { $b->seq() <=> $a->seq() } @{$jobs_of{$sshlogin}}) {
	    if($sshlogin->limit() == 2) {
		$job->kill();
		last;
	    }
	}
    }
}

sub kill_youngster_if_not_enough_mem() {
    # Check each $sshlogin if there is enough mem.
    # If less than 50% enough free mem: kill off the youngest child
    # Put the child back in the queue.
    # Uses:
    #   %Global::running
    my %jobs_of;
    my @sshlogins;

    for my $job (values %Global::running) {
	if(not $jobs_of{$job->sshlogin()}) {
	    push @sshlogins, $job->sshlogin();
	}
	push @{$jobs_of{$job->sshlogin()}}, $job;
    }
    for my $sshlogin (@sshlogins) {
	for my $job (sort { $b->seq() <=> $a->seq() } @{$jobs_of{$sshlogin}}) {
	    if($sshlogin->memfree() < $opt::memfree * 0.5) {
		::debug("mem","\n",map { $_->seq()." " }
			(sort { $b->seq() <=> $a->seq() }
			 @{$jobs_of{$sshlogin}}));
		::debug("mem","\n", $job->seq(), "killed ",
			$sshlogin->memfree()," < ",$opt::memfree * 0.5);
		$job->kill();
		$sshlogin->memfree_recompute();
	    } else {
		last;
	    }
	}
	::debug("mem","Free mem OK ",
		$sshlogin->memfree()," > ",$opt::memfree * 0.5);
    }
}


sub __DEBUGGING__() {}


sub debug(@) {
    # Uses:
    #   $Global::debug
    #   %Global::fd
    # Returns: N/A
    $Global::debug or return;
    @_ = grep { defined $_ ? $_ : "" } @_;
    if($Global::debug eq "all" or $Global::debug eq $_[0]) {
	if($Global::fd{1}) {
	    # Original stdout was saved
	    my $stdout = $Global::fd{1};
	    print $stdout @_[1..$#_];
	} else {
	    print @_[1..$#_];
	}
    }
}

sub my_memory_usage() {
    # Returns:
    #   memory usage if found
    #   0 otherwise
    use strict;
    use FileHandle;

    local $/ = "\n";
    my $pid = $$;
    if(-e "/proc/$pid/stat") {
        my $fh = FileHandle->new("</proc/$pid/stat");

        my $data = <$fh>;
        chomp $data;
        $fh->close;

        my @procinfo = split(/\s+/,$data);

        return undef_as_zero($procinfo[22]);
    } else {
        return 0;
    }
}

sub my_size() {
    # Returns:
    #   $size = size of object if Devel::Size is installed
    #   -1 otherwise
    my @size_this = (@_);
    eval "use Devel::Size qw(size total_size)";
    if ($@) {
        return -1;
    } else {
        return total_size(@_);
    }
}

sub my_dump(@) {
    # Returns:
    #   ascii expression of object if Data::Dump(er) is installed
    #   error code otherwise
    my @dump_this = (@_);
    eval "use Data::Dump qw(dump);";
    if ($@) {
        # Data::Dump not installed
        eval "use Data::Dumper;";
        if ($@) {
            my $err =  "Neither Data::Dump nor Data::Dumper is installed\n".
                "Not dumping output\n";
            ::status($err);
            return $err;
        } else {
            return Dumper(@dump_this);
        }
    } else {
	# Create a dummy Data::Dump:dump as Hans Schou sometimes has
	# it undefined
	eval "sub Data::Dump:dump {}";
        eval "use Data::Dump qw(dump);";
        return (Data::Dump::dump(@dump_this));
    }
}

sub my_croak(@) {
    eval "use Carp; 1";
    $Carp::Verbose = 1;
    croak(@_);
}

sub my_carp() {
    eval "use Carp; 1";
    $Carp::Verbose = 1;
    carp(@_);
}


sub __OBJECT_ORIENTED_PARTS__() {}


package SSHLogin;

sub new($$) {
    my $class = shift;
    my $sshlogin_string = shift;
    my $ncpus;
    my %hostgroups;
    # SSHLogins can have these formats:
    #   @grp+grp/ncpu//usr/bin/ssh user@server
    #   ncpu//usr/bin/ssh user@server
    #   /usr/bin/ssh user@server
    #   user@server
    #   ncpu/user@server
    #   @grp+grp/user@server
    if($sshlogin_string =~ s:^\@([^/]+)/?::) {
        # Look for SSHLogin hostgroups
        %hostgroups = map { $_ => 1 } split(/\+/, $1);
    }
    # An SSHLogin is always in the hostgroup of its "numcpu/host"
    $hostgroups{$sshlogin_string} = 1;
    if ($sshlogin_string =~ s:^(\d+)/::) {
        # Override default autodetected ncpus unless missing
        $ncpus = $1;
    }
    my $string = $sshlogin_string;
    # An SSHLogin is always in the hostgroup of its $string-name
    $hostgroups{$string} = 1;
    @Global::hostgroups{keys %hostgroups} = values %hostgroups;
    my @unget = ();
    my $no_slash_string = $string;
    $no_slash_string =~ s/[^-a-z0-9:]/_/gi;
    return bless {
        'string' => $string,
        'jobs_running' => 0,
        'jobs_completed' => 0,
        'maxlength' => undef,
        'max_jobs_running' => undef,
        'orig_max_jobs_running' => undef,
        'ncpus' => $ncpus,
        'hostgroups' => \%hostgroups,
        'sshcommand' => undef,
        'serverlogin' => undef,
        'control_path_dir' => undef,
        'control_path' => undef,
	'time_to_login' => undef,
	'last_login_at' => undef,
        'loadavg_file' => $Global::cache_dir . "/tmp/sshlogin/" .
	    $no_slash_string . "/loadavg",
        'loadavg' => undef,
	'last_loadavg_update' => 0,
        'swap_activity_file' => $Global::cache_dir . "/tmp/sshlogin/" .
            $no_slash_string . "/swap_activity",
        'swap_activity' => undef,
    }, ref($class) || $class;
}

sub DESTROY($) {
    my $self = shift;
    # Remove temporary files if they are created.
    ::rm($self->{'loadavg_file'});
    ::rm($self->{'swap_activity_file'});
}

sub string($) {
    my $self = shift;
    return $self->{'string'};
}

sub jobs_running($) {
    my $self = shift;
    return ($self->{'jobs_running'} || "0");
}

sub inc_jobs_running($) {
    my $self = shift;
    $self->{'jobs_running'}++;
}

sub dec_jobs_running($) {
    my $self = shift;
    $self->{'jobs_running'}--;
}

sub set_maxlength($$) {
    my $self = shift;
    $self->{'maxlength'} = shift;
}

sub maxlength($) {
    my $self = shift;
    return $self->{'maxlength'};
}

sub jobs_completed() {
    my $self = shift;
    return $self->{'jobs_completed'};
}

sub in_hostgroups() {
    # Input:
    #   @hostgroups = the hostgroups to look for
    # Returns:
    #   true if intersection of @hostgroups and the hostgroups of this
    #        SSHLogin is non-empty
    my $self = shift;
    return grep { defined $self->{'hostgroups'}{$_} } @_;
}

sub hostgroups() {
    my $self = shift;
    return keys %{$self->{'hostgroups'}};
}

sub inc_jobs_completed($) {
    my $self = shift;
    $self->{'jobs_completed'}++;
    $Global::total_completed++;
}

sub set_max_jobs_running($$) {
    my $self = shift;
    if(defined $self->{'max_jobs_running'}) {
        $Global::max_jobs_running -= $self->{'max_jobs_running'};
    }
    $self->{'max_jobs_running'} = shift;
    if(defined $self->{'max_jobs_running'}) {
        # max_jobs_running could be resat if -j is a changed file
        $Global::max_jobs_running += $self->{'max_jobs_running'};
    }
    # Initialize orig to the first non-zero value that comes around
    $self->{'orig_max_jobs_running'} ||= $self->{'max_jobs_running'};
}

sub memfree() {
    # Returns:
    #   $memfree in bytes
    my $self = shift;
    $self->memfree_recompute();
    # Return 1 if not defined.
    return (not defined $self->{'memfree'} or $self->{'memfree'})
}

sub memfree_recompute() {
    my $self = shift;
    my $script = memfreescript();

    # TODO add sshlogin and backgrounding
    # Run the script twice if it gives 0 (typically intermittent error)
    $self->{'memfree'} = ::qqx($script) || ::qqx($script);
    if(not $self->{'memfree'}) {
	::die_bug("Less than 1 byte memory free");
    }
    #::debug("mem","New free:",$self->{'memfree'}," ");
}

{
    my $script;

    sub memfreescript() {
	# Returns:
	#   shellscript for giving available memory in bytes
	if(not $script) {
	    my %script_of = (
		# /proc/meminfo
		# MemFree:          7012 kB
		# Buffers:         19876 kB
		# Cached:         431192 kB
		# SwapCached:          0 kB
		"linux" =>
		q[ print 1024 * qx{ ].
		q[   awk '/^((Swap)?Cached|MemFree|Buffers):/ ].
		q[     { sum += \$2} END { print sum }' ].
		q[   /proc/meminfo } ],
		# Android uses same code as GNU/Linux
		"android" =>
		q[ print 1024 * qx{ ].
		q[   awk '/^((Swap)?Cached|MemFree|Buffers):/ ].
		q[     { sum += \$2} END { print sum }' ].
		q[   /proc/meminfo } ],

		# $ vmstat 1 1
		#     procs           memory                   page                              faults       cpu
		# r     b     w      avm    free   re   at    pi   po    fr   de    sr     in     sy    cs  us sy id
		# 1     0     0   242793  389737    5    1     0    0     0    0     0    107    978    60   1  1 99
		"hpux" =>
		q[ print (((reverse `vmstat 1 1`)[0] ].
		q[   =~ /(?:\d+\D+){4}(\d+)/)[0]*1024) ],
		# $ vmstat 1 2
		# kthr      memory            page            disk          faults      cpu
		# r b w   swap  free  re  mf pi po fr de sr s3 s4 -- --   in   sy   cs us sy id
		# 0 0 0 6496720 5170320 68 260 8 2  1  0  0 -0  3  0  0  309 1371  255  1  2 97
		# 0 0 0 6434088 5072656 7 15  8  0  0  0  0  0 261 0  0 1889 1899 3222  0  8 92
		#
		# The second free value is correct
		"solaris" =>
		q[ print (((reverse `vmstat 1 2`)[0] ].
		q[   =~ /(?:\d+\D+){4}(\d+)/)[0]*1024) ],
		"freebsd" => q{
			for(qx{/sbin/sysctl -a}) {
			    if (/^([^:]+):\s+(.+)\s*$/s) {
				$sysctl->{$1} = $2;
			    }
			}
			print $sysctl->{"hw.pagesize"} *
			    ($sysctl->{"vm.stats.vm.v_cache_count"}
			     + $sysctl->{"vm.stats.vm.v_inactive_count"}
			     + $sysctl->{"vm.stats.vm.v_free_count"});
		    },
		# Mach Virtual Memory Statistics: (page size of 4096 bytes)
		# Pages free:                         198061.
		# Pages active:                       159701.
		# Pages inactive:                      47378.
		# Pages speculative:                   29707.
		# Pages wired down:                    89231.
		# "Translation faults":            928901425.
		# Pages copy-on-write:             156988239.
		# Pages zero filled:               271267894.
		# Pages reactivated:                   48895.
	        # Pageins:                           1798068.
	        # Pageouts:                              257.
		# Object cache: 6603 hits of 1713223 lookups (0% hit rate)
		'darwin' =>
		q[ $vm = `vm_stat`;
		  print (($vm =~ /page size of (\d+)/)[0] *
		  (($vm =~ /Pages free:\s+(\d+)/)[0] +
		   ($vm =~ /Pages inactive:\s+(\d+)/)[0]));
		],
		);
	    my $perlscript = "";
	    # Make a perl script that detects the OS ($^O) and runs
	    # the appropriate command
	    for my $os (keys %script_of) {
		$perlscript .= 'if($^O eq "'.$os.'") { '.$script_of{$os}.'}';
	    }
	    $perlscript =~ s/[\t\n ]+/ /g;
	    $script = "perl -e " . ::Q($perlscript);
	}
	return $script;
    }
}

sub limit($) {
    # Returns:
    #  0 = Below limit. Start another job.
    #  1 = Over limit. Start no jobs.
    #  2 = Kill youngest job
    my $self = shift;

    if(not defined $self->{'limitscript'}) {
	my %limitscripts =
	    ("io" => q!
	     io() {
	         limit=$1;
                 io_file=$2;
	         # Do the measurement in the background
	         (tmp=$(tempfile);
	         LANG=C iostat -x 1 2 > $tmp;
	         mv $tmp $io_file) &
	         perl -e '-e $ARGV[0] or exit(1);
                   for(reverse <>) {
                     /Device/ and last;
                     /(\S+)$/ and $max = $max > $1 ? $max : $1; }
                   exit ($max < '$limit')' $io_file;
	     };
             export -f io;
             io %s %s
             !,
	     "mem" => q!
             mem() {
		 limit=$1;
		 awk '/^((Swap)?Cached|MemFree|Buffers):/{ sum += $2}
                      END {
                         if (sum*1024 < '$limit'/2) { exit 2; }
                         else { exit (sum*1024 < '$limit') }
                      }' /proc/meminfo;
             };
             export -f mem;
	     mem %s;
             !,
     	     "load" => q!
	     load() {
	     	 limit=$1;
	     	 ps ax -o state,command |
	     	     grep -E '^[DOR].[^[]' |
	     	     wc -l |
	     	 perl -ne 'exit ('$limit' < $_)';
	     };
	     export -f load;
	     load %s;
	     !,
	    );
	my ($cmd,@args) = split /\s+/,$opt::limit;
	if($limitscripts{$cmd}) {
	    my $tmpfile = ::tmpname("parlmt");
	    ++$Global::unlink{$tmpfile};
	    $self->{'limitscript'} =
	    ::spacefree(1, sprintf($limitscripts{$cmd},
				   ::multiply_binary_prefix(@args),$tmpfile));
	} else {
	    $self->{'limitscript'} = $opt::limit;
	}
    }

    my %env = %ENV;
    local %ENV = %env;
    $ENV{'SSHLOGIN'} = $self->string();
    system($Global::shell,"-c",$self->{'limitscript'});
    ::debug("limit","limit `".$self->{'limitscript'}."` result ".($?>>8)."\n");
    return $?>>8;
}


sub swapping($) {
    my $self = shift;
    my $swapping = $self->swap_activity();
    return (not defined $swapping or $swapping)
}

sub swap_activity($) {
    # If the currently known swap activity is too old:
    #   Recompute a new one in the background
    # Returns:
    #   last swap activity computed
    my $self = shift;
    # Should we update the swap_activity file?
    my $update_swap_activity_file = 0;
    if(-r $self->{'swap_activity_file'}) {
        open(my $swap_fh, "<", $self->{'swap_activity_file'}) ||
	    ::die_bug("swap_activity_file-r");
        my $swap_out = <$swap_fh>;
        close $swap_fh;
        if($swap_out =~ /^(\d+)$/) {
            $self->{'swap_activity'} = $1;
            ::debug("swap", "New swap_activity: ", $self->{'swap_activity'});
        }
        ::debug("swap", "Last update: ", $self->{'last_swap_activity_update'});
        if(time - $self->{'last_swap_activity_update'} > 10) {
            # last swap activity update was started 10 seconds ago
            ::debug("swap", "Older than 10 sec: ", $self->{'swap_activity_file'});
            $update_swap_activity_file = 1;
        }
    } else {
        ::debug("swap", "No swap_activity file: ", $self->{'swap_activity_file'});
        $self->{'swap_activity'} = undef;
        $update_swap_activity_file = 1;
    }
    if($update_swap_activity_file) {
        ::debug("swap", "Updating swap_activity file ", $self->{'swap_activity_file'});
        $self->{'last_swap_activity_update'} = time;
	my $dir = ::dirname($self->{'swap_activity_file'});
	-d $dir or eval { File::Path::mkpath($dir); };
        my $swap_activity;
	$swap_activity = swapactivityscript();
        if($self->{'string'} ne ":") {
            $swap_activity = $self->sshcommand() . " " . $self->serverlogin() . " " .
		::Q($swap_activity);
        }
        # Run swap_activity measuring.
        # As the command can take long to run if run remote
        # save it to a tmp file before moving it to the correct file
        my $file = $self->{'swap_activity_file'};
        my ($dummy_fh, $tmpfile) = ::tmpfile(SUFFIX => ".swp");
	::debug("swap", "\n", $swap_activity, "\n");
        ::qqx("($swap_activity > $tmpfile && mv $tmpfile $file || rm $tmpfile &)");
    }
    return $self->{'swap_activity'};
}

{
    my $script;

    sub swapactivityscript() {
	# Returns:
	#   shellscript for detecting swap activity
	#
	# arguments for vmstat are OS dependant
	# swap_in and swap_out are in different columns depending on OS
	#
	if(not $script) {
	    my %vmstat = (
		# linux: $7*$8
		# $ vmstat 1 2
		# procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
		#  r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
		#  5  0  51208 1701096 198012 18857888    0    0    37   153   28   19 56 11 33  1
		#  3  0  51208 1701288 198012 18857972    0    0     0     0 3638 10412 15  3 82  0
		'linux' => ['vmstat 1 2 | tail -n1', '$7*$8'],

		# solaris: $6*$7
		# $ vmstat -S 1 2
		#  kthr      memory            page            disk          faults      cpu
		#  r b w   swap  free  si  so pi po fr de sr s3 s4 -- --   in   sy   cs us sy id
		#  0 0 0 4628952 3208408 0  0  3  1  1  0  0 -0  2  0  0  263  613  246  1  2 97
		#  0 0 0 4552504 3166360 0  0  0  0  0  0  0  0  0  0  0  246  213  240  1  1 98
		'solaris' => ['vmstat -S 1 2 | tail -1', '$6*$7'],

		# darwin (macosx): $21*$22
		# $ vm_stat -c 2 1
		# Mach Virtual Memory Statistics: (page size of 4096 bytes)
		#     free   active   specul inactive throttle    wired  prgable   faults     copy    0fill reactive   purged file-backed anonymous cmprssed cmprssor  dcomprs   comprs  pageins  pageout  swapins swapouts
		#   346306   829050    74871   606027        0   240231    90367  544858K 62343596  270837K    14178   415070      570102    939846      356      370      116      922  4019813        4        0        0
		#   345740   830383    74875   606031        0   239234    90369     2696      359      553        0        0      570110    941179      356      370        0        0        0        0        0        0
		'darwin' => ['vm_stat -c 2 1 | tail -n1', '$21*$22'],

		# ultrix: $12*$13
		# $ vmstat -S 1 2
		#  procs      faults    cpu      memory              page             disk
		#  r b w   in  sy  cs us sy id  avm  fre  si so  pi  po  fr  de  sr s0
		#  1 0 0    4  23   2  3  0 97 7743 217k   0  0   0   0   0   0   0  0
		#  1 0 0    6  40   8  0  1 99 7743 217k   0  0   3   0   0   0   0  0
		'ultrix' => ['vmstat -S 1 2 | tail -1', '$12*$13'],

		# aix: $6*$7
		# $ vmstat 1 2
		# System configuration: lcpu=1 mem=2048MB
		#
		# kthr    memory              page              faults        cpu
		# ----- ----------- ------------------------ ------------ -----------
		#  r  b   avm   fre  re  pi  po  fr   sr  cy  in   sy  cs us sy id wa
		#  0  0 333933 241803   0   0   0   0    0   0  10  143  90  0  0 99  0
		#  0  0 334125 241569   0   0   0   0    0   0  37 5368 184  0  9 86  5
		'aix' => ['vmstat 1 2 | tail -n1', '$6*$7'],

		# freebsd: $8*$9
		# $ vmstat -H 1 2
		#  procs      memory      page                    disks     faults         cpu
		#  r b w     avm    fre   flt  re  pi  po    fr  sr ad0 ad1   in   sy   cs us sy id
		#  1 0 0  596716   19560    32   0   0   0    33   8   0   0   11  220  277  0  0 99
		#  0 0 0  596716   19560     2   0   0   0     0   0   0   0   11  144  263  0  1 99
		'freebsd' => ['vmstat -H 1 2 | tail -n1', '$8*$9'],

		# mirbsd: $8*$9
		# $ vmstat 1 2
		#  procs   memory        page                    disks     traps         cpu
		#  r b w    avm    fre   flt  re  pi  po  fr  sr wd0 cd0  int   sys   cs us sy id
		#  0 0 0  25776 164968    34   0   0   0   0   0   0   0  230   259   38  4  0 96
		#  0 0 0  25776 164968    24   0   0   0   0   0   0   0  237   275   37  0  0 100
		'mirbsd' => ['vmstat 1 2 | tail -n1', '$8*$9'],

		# netbsd: $7*$8
		# $ vmstat 1 2
		#  procs    memory      page                       disks   faults      cpu
		#  r b      avm    fre  flt  re  pi   po   fr   sr w0 w1   in   sy  cs us sy id
		#  0 0   138452   6012   54   0   0    0    1    2  3  0    4  100  23  0  0 100
		#  0 0   138456   6008    1   0   0    0    0    0  0  0    7   26  19  0 0 100
		'netbsd' => ['vmstat 1 2 | tail -n1', '$7*$8'],

		# openbsd: $8*$9
		# $ vmstat 1 2
		#  procs    memory       page                    disks    traps          cpu
		#  r b w    avm     fre  flt  re  pi  po  fr  sr wd0 wd1  int   sys   cs us sy id
		#  0 0 0  76596  109944   73   0   0   0   0   0   0   1    5   259   22  0  1 99
		#  0 0 0  76604  109936   24   0   0   0   0   0   0   0    7   114   20  0  1 99
		'openbsd' => ['vmstat 1 2 | tail -n1', '$8*$9'],

		# hpux: $8*$9
		# $ vmstat 1 2
		#          procs           memory                   page                              faults       cpu
		#     r     b     w      avm    free   re   at    pi   po    fr   de    sr     in     sy    cs  us sy id
		#     1     0     0   247211  216476    4    1     0    0     0    0     0    102  73005    54   6 11 83
		#     1     0     0   247211  216421   43    9     0    0     0    0     0    144   1675    96  25269512791222387000 25269512791222387000 105
		'hpux' => ['vmstat 1 2 | tail -n1', '$8*$9'],

		# dec_osf (tru64): $11*$12
		# $ vmstat  1 2
		# Virtual Memory Statistics: (pagesize = 8192)
		#   procs      memory        pages                            intr       cpu
		#   r   w   u  act free wire fault  cow zero react  pin pout  in  sy  cs us sy id
		#   3 181  36  51K 1895 8696  348M  59M 122M   259  79M    0   5 218 302  4  1 94
		#   3 181  36  51K 1893 8696     3   15   21     0   28    0   4  81 321  1  1 98
		'dec_osf' => ['vmstat 1 2 | tail -n1', '$11*$12'],

		# gnu (hurd): $7*$8
		# $ vmstat -k 1 2
		# (pagesize: 4, size: 512288, swap size: 894972)
		#   free   actv  inact  wired   zeroed  react    pgins   pgouts  pfaults  cowpfs hrat    caobj  cache swfree
		# 371940  30844  89228  20276   298348      0    48192    19016   756105   99808  98%      876  20628 894972
		# 371940  30844  89228  20276       +0     +0       +0       +0      +42      +2  98%      876  20628 894972
		'gnu' => ['vmstat -k 1 2 | tail -n1', '$7*$8'],

		# -nto (qnx has no swap)
		#-irix
		#-svr5 (scosysv)
		);
	    my $perlscript = "";
	    # Make a perl script that detects the OS ($^O) and runs
	    # the appropriate vmstat command
	    for my $os (keys %vmstat) {
		$vmstat{$os}[1] =~ s/\$/\\\\\\\$/g; # $ => \\\$
		$perlscript .= 'if($^O eq "'.$os.'") { print `'.$vmstat{$os}[0].' | awk "{print ' .
		    $vmstat{$os}[1] . '}"` }';
	    }
	    $script = "perl -e " . ::Q($perlscript);
	}
	return $script;
    }
}

sub too_fast_remote_login($) {
    my $self = shift;
    if($self->{'last_login_at'} and $self->{'time_to_login'}) {
	# sshd normally allows 10 simultaneous logins
	# A login takes time_to_login
	# So time_to_login/5 should be safe
	# If now <= last_login + time_to_login/5: Then it is too soon.
	my $too_fast = (::now() <= $self->{'last_login_at'}
			+ $self->{'time_to_login'}/5);
	::debug("run", "Too fast? $too_fast ");
	return $too_fast;
    } else {
	# No logins so far (or time_to_login not computed): it is not too fast
	return 0;
    }
}

sub last_login_at($) {
    my $self = shift;
    return $self->{'last_login_at'};
}

sub set_last_login_at($$) {
    my $self = shift;
    $self->{'last_login_at'} = shift;
}

sub loadavg_too_high($) {
    my $self = shift;
    my $loadavg = $self->loadavg();
    if(defined $loadavg) {
	::debug("load", "Load $loadavg > ",$self->max_loadavg());
	return $loadavg >= $self->max_loadavg();
    } else {
	# Unknown load: Assume load is too high
	return 1;
    }
}

{
    my $cmd;
    sub loadavg_cmd() {
	if(not $cmd) {
	    # aix => "ps -ae -o state,command" # state wrong
	    # bsd => "ps ax -o state,command"
	    # sysv => "ps -ef -o s -o comm"
	    # cygwin => perl -ne 'close STDERR; /Name/ and print"\n"; \
	    #    /(Name|Pid|Ppid|State):\s+(\S+)/ and print "$2\t";' /proc/*/status |
	    #    awk '{print $2,$1}'
	    # dec_osf => bsd
	    # dragonfly => bsd
	    # freebsd => bsd
	    # gnu => bsd
	    # hpux => ps -el|awk '{print $2,$14,$15}'
	    # irix => ps -ef -o state -o comm
	    # linux => bsd
	    # minix => ps el|awk '{print \$1,\$11}'
	    # mirbsd => bsd
	    # netbsd => bsd
	    # openbsd => bsd
	    # solaris => sysv
	    # svr5 => sysv
	    # ultrix => ps -ax | awk '{print $3,$5}'
	    # unixware => ps -el|awk '{print $2,$14,$15}'
	    my $ps = ::spacefree(1,q{
		$sysv="ps -ef -o s -o comm";
		$sysv2="ps -ef -o state -o comm";
		$bsd="ps ax -o state,command";
		# Treat threads as processes
		$bsd2="ps axH -o state,command";
		$psel="ps -el|awk '{ print \$2,\$14,\$15 }'";
		$cygwin=q{ perl -ne 'close STDERR; /Name/ and print"\n";
                    /(Name|Pid|Ppid|State):\s+(\S+)/ and print "$2\t";' /proc/*/status |
                    awk '{print $2,$1}' };
		$dummy="echo S COMMAND;echo R dummy";
		%ps=(
		    # TODO Find better code for AIX/Android
		    'aix' => "uptime",
		    'android' => "uptime",
		    'cygwin' => $cygwin,
		    'darwin' => $bsd,
		    'dec_osf' => $sysv2,
		    'dragonfly' => $bsd,
		    'freebsd' => $bsd2,
		    'gnu' => $bsd,
		    'hpux' => $psel,
		    'irix' => $sysv2,
		    'linux' => $bsd2,
		    'minix' => "ps el|awk '{print \$1,\$11}'",
		    'mirbsd' => $bsd,
		    'msys' => $cygwin,
		    'netbsd' => $bsd,
		    'nto' => $dummy,
		    'openbsd' => $bsd,
		    'solaris' => $sysv,
		    'svr5' => $psel,
		    'ultrix' => "ps -ax | awk '{print \$3,\$5}'",
	            'MSWin32' => $sysv,
		    );
		print `$ps{$^O}`;
	    });
	    # The command is too long for csh, so base64_wrap the command
	    $cmd = Job::base64_wrap($ps);
	}
	return $cmd;
    }
}


sub loadavg($) {
    # If the currently know loadavg is too old:
    #   Recompute a new one in the background
    # The load average is computed as the number of processes waiting for disk
    # or CPU right now. So it is the server load this instant and not averaged over
    # several minutes. This is needed so Parallel will at most start one job
    # that will push the load over the limit.
    #
    # Returns:
    #   $last_loadavg = last load average computed (undef if none)
    my $self = shift;
    # Should we update the loadavg file?
    my $update_loadavg_file = 0;
    if(open(my $load_fh, "<", $self->{'loadavg_file'})) {
	local $/; # $/ = undef => slurp whole file
        my $load_out = <$load_fh>;
        close $load_fh;
	if($load_out =~ /\S/) {
	    # Content can be empty if ~/ is on NFS
	    # due to reading being non-atomic.
	    #
	    # Count lines starting with D,O,R but command does not start with [
	    my $load =()= ($load_out=~/(^\s?[DOR]\S* +(?=[^\[])\S)/gm);
	    if($load > 0) {
		# load is overestimated by 1
		$self->{'loadavg'} = $load - 1;
		::debug("load", "New loadavg: ", $self->{'loadavg'},"\n");
	    } elsif ($load_out=~/average: (\d+.\d+)/) {
		# AIX does not support instant load average
		# 04:11AM   up 21 days,  12:55,  1 user,  load average: 1.85, 1.57, 1.55
		$self->{'loadavg'} = $1;
	    } else {
		::die_bug("loadavg_invalid_content: " .
			  $self->{'loadavg_file'} . "\n$load_out");
	    }
	}
	$update_loadavg_file = 1;
    } else {
        ::debug("load", "No loadavg file: ", $self->{'loadavg_file'});
        $self->{'loadavg'} = undef;
        $update_loadavg_file = 1;
    }
    if($update_loadavg_file) {
        ::debug("load", "Updating loadavg file", $self->{'loadavg_file'}, "\n");
        $self->{'last_loadavg_update'} = time;
	my $dir = ::dirname($self->{'swap_activity_file'});
	-d $dir or eval { File::Path::mkpath($dir); };
        -w $dir or ::die_bug("Cannot write to $dir");
        my $cmd = "";
        if($self->{'string'} ne ":") {
	    $cmd = $self->sshcommand() . " " . $self->serverlogin() . " " .
		::Q(loadavg_cmd());
	} else {
	    $cmd .= loadavg_cmd();
	}
        # As the command can take long to run if run remote
        # save it to a tmp file before moving it to the correct file
        ::debug("load", "Update load\n");
        my $file = $self->{'loadavg_file'};
	# tmpfile on same filesystem as $file
        my $tmpfile = $file.$$;
        ::qqx("($cmd > $tmpfile && mv $tmpfile $file || rm $tmpfile & )");
    }
    return $self->{'loadavg'};
}

sub max_loadavg($) {
    my $self = shift;
    # If --load is a file it might be changed
    if($Global::max_load_file) {
	my $mtime = (stat($Global::max_load_file))[9];
	if($mtime > $Global::max_load_file_last_mod) {
	    $Global::max_load_file_last_mod = $mtime;
	    for my $sshlogin (values %Global::host) {
		$sshlogin->set_max_loadavg(undef);
	    }
	}
    }
    if(not defined $self->{'max_loadavg'}) {
        $self->{'max_loadavg'} =
            $self->compute_max_loadavg($opt::load);
    }
    ::debug("load", "max_loadavg: ", $self->string(), " ", $self->{'max_loadavg'});
    return $self->{'max_loadavg'};
}

sub set_max_loadavg($$) {
    my $self = shift;
    $self->{'max_loadavg'} = shift;
}

sub compute_max_loadavg($) {
    # Parse the max loadaverage that the user asked for using --load
    # Returns:
    #   max loadaverage
    my $self = shift;
    my $loadspec = shift;
    my $load;
    if(defined $loadspec) {
        if($loadspec =~ /^\+(\d+)$/) {
            # E.g. --load +2
            my $j = $1;
            $load =
                $self->ncpus() + $j;
        } elsif ($loadspec =~ /^-(\d+)$/) {
            # E.g. --load -2
            my $j = $1;
            $load =
                $self->ncpus() - $j;
        } elsif ($loadspec =~ /^(\d+)\%$/) {
            my $j = $1;
            $load =
                $self->ncpus() * $j / 100;
        } elsif ($loadspec =~ /^(\d+(\.\d+)?)$/) {
            $load = $1;
        } elsif (-f $loadspec) {
            $Global::max_load_file = $loadspec;
            $Global::max_load_file_last_mod = (stat($Global::max_load_file))[9];
            if(open(my $in_fh, "<", $Global::max_load_file)) {
                my $opt_load_file = join("",<$in_fh>);
                close $in_fh;
                $load = $self->compute_max_loadavg($opt_load_file);
            } else {
                ::error("Cannot open $loadspec.");
                ::wait_and_exit(255);
            }
        } else {
            ::error("Parsing of --load failed.");
            ::die_usage();
        }
        if($load < 0.01) {
            $load = 0.01;
        }
    }
    return $load;
}

sub time_to_login($) {
    my $self = shift;
    return $self->{'time_to_login'};
}

sub set_time_to_login($$) {
    my $self = shift;
    $self->{'time_to_login'} = shift;
}

sub max_jobs_running($) {
    my $self = shift;
    if(not defined $self->{'max_jobs_running'}) {
        my $nproc = $self->compute_number_of_processes($opt::jobs);
        $self->set_max_jobs_running($nproc);
    }
    return $self->{'max_jobs_running'};
}

sub orig_max_jobs_running($) {
    my $self = shift;
    return $self->{'orig_max_jobs_running'};
}

sub compute_number_of_processes($) {
    # Number of processes wanted and limited by system resources
    # Returns:
    #   Number of processes
    my $self = shift;
    my $opt_P = shift;
    my $wanted_processes = $self->user_requested_processes($opt_P);
    if(not defined $wanted_processes) {
        $wanted_processes = $Global::default_simultaneous_sshlogins;
    }
    ::debug("load", "Wanted procs: $wanted_processes\n");
    my $system_limit =
        $self->processes_available_by_system_limit($wanted_processes);
    ::debug("load", "Limited to procs: $system_limit\n");
    return $system_limit;
}

{
    my @children;
    my $max_system_proc_reached;
    my $more_filehandles;
    my %fh;
    my $tmpfhname;
    my $count_jobs_already_read;
    my @jobs;
    my $job;
    my @args;
    my $arg;

    sub reserve_filehandles($) {
	# Reserves filehandle
	my $n = shift;
	for (1..$n) {
	    $more_filehandles &&= open($fh{$tmpfhname++}, "<", "/dev/null");
	}
    }

    sub reserve_process() {
	# Spawn a dummy process
	my $child;
	if($child = fork()) {
	    push @children, $child;
	    $Global::unkilled_children{$child} = 1;
	} elsif(defined $child) {
	    # This is the child
	    # The child takes one process slot
	    # It will be killed later
	    $SIG{'TERM'} = $Global::original_sig{'TERM'};
	    if($^O eq "cygwin" or $^O eq "msys" or $^O eq "nto") {
		# The exec does not work on Cygwin and QNX
		sleep 10101010;
	    } else {
		# 'exec sleep' takes less RAM than sleeping in perl
		exec 'sleep', 10101;
	    }
	    exit(0);
	} else {
	    # Failed to spawn
            $max_system_proc_reached = 1;
	}
    }

    sub get_args_or_jobs() {
	# Get an arg or a job (depending on mode)
	if($Global::semaphore or ($opt::pipe and not $opt::tee)) {
	    # Skip: No need to get args
	    return 1;
	} elsif(defined $opt::retries and $count_jobs_already_read) {
	    # For retries we may need to run all jobs on this sshlogin
	    # so include the already read jobs for this sshlogin
	    $count_jobs_already_read--;
	    return 1;
	} else {
	    if($opt::X or $opt::m) {
		# The arguments may have to be re-spread over several jobslots
		# So pessimistically only read one arg per jobslot
		# instead of a full commandline
		if($Global::JobQueue->{'commandlinequeue'}->{'arg_queue'}->empty()) {
		    if($Global::JobQueue->empty()) {
			return 0;
		    } else {
			$job = $Global::JobQueue->get();
			push(@jobs, $job);
			return 1;
		    }
		} else {
		    $arg = $Global::JobQueue->{'commandlinequeue'}->{'arg_queue'}->get();
		    push(@args, $arg);
		    return 1;
		}
	    } else {
		# If there are no more command lines, then we have a process
		# per command line, so no need to go further
		if($Global::JobQueue->empty()) {
		    return 0;
		} else {
		    $job = $Global::JobQueue->get();
		    # Replacement must happen here due to seq()
		    $job and $job->replaced();
		    push(@jobs, $job);
		    return 1;
		}
	    }
	}
    }

    sub cleanup() {
	# Cleanup: Close the files
	for (values %fh) { close $_ }
	# Cleanup: Kill the children
	for my $pid (@children) {
	    kill 9, $pid;
	    waitpid($pid,0);
	    delete $Global::unkilled_children{$pid};
	}
	# Cleanup: Unget the command_lines or the @args
	$Global::JobQueue->{'commandlinequeue'}->{'arg_queue'}->unget(@args);
	@args = ();
	$Global::JobQueue->unget(@jobs);
	@jobs = ();
    }

    sub processes_available_by_system_limit($) {
	# If the wanted number of processes is bigger than the system limits:
	# Limit them to the system limits
	# Limits are: File handles, number of input lines, processes,
	# and taking > 1 second to spawn 10 extra processes
	# Returns:
	#   Number of processes
	my $self = shift;
	my $wanted_processes = shift;
	my $system_limit = 0;
	my $slow_spawning_warning_printed = 0;
	my $time = time;
	$more_filehandles = 1;
	$tmpfhname = "TmpFhNamE";

	# perl uses 7 filehandles for something?
	# parallel uses 1 for memory_usage
	# parallel uses 4 for ?
	reserve_filehandles(12);
	# Two processes for load avg and ?
	reserve_process();
	reserve_process();

	# For --retries count also jobs already run
	$count_jobs_already_read = $Global::JobQueue->next_seq();
	my $wait_time_for_getting_args = 0;
	my $start_time = time;
	while(1) {
	    $system_limit >= $wanted_processes and last;
	    not $more_filehandles and last;
	    $max_system_proc_reached and last;

	    my $before_getting_arg = time;
	    if(!$Global::dummy_jobs) {
		get_args_or_jobs() or last;
	    }
	    $wait_time_for_getting_args += time - $before_getting_arg;
	    $system_limit++;

	    # Every simultaneous process uses 2 filehandles to write to
	    # and 2 filehandles to read from
	    reserve_filehandles(4);

	    # System process limit
	    reserve_process();

	    my $forktime = time - $time - $wait_time_for_getting_args;
	    ::debug("run", "Time to fork $system_limit procs: $wait_time_for_getting_args ",
		    $forktime,
		    " (processes so far: ", $system_limit,")\n");
	    if($system_limit > 10 and
	       $forktime > 1 and
	       $forktime > $system_limit * 0.01
	       and not $slow_spawning_warning_printed) {
		# It took more than 0.01 second to fork a processes on avg.
		# Give the user a warning. He can press Ctrl-C if this
		# sucks.
		::warning("Starting $system_limit processes took > $forktime sec.",
			  "Consider adjusting -j. Press CTRL-C to stop.");
		$slow_spawning_warning_printed = 1;
	    }
	}
	cleanup();

	if($system_limit < $wanted_processes) {
	    # The system_limit is less than the wanted_processes
	    if($system_limit < 1 and not $Global::JobQueue->empty()) {
		::warning("Cannot spawn any jobs. ".
			  "Raising ulimit -u or 'nproc' in /etc/security/limits.conf",
			  "or /proc/sys/kernel/pid_max may help.");
		::wait_and_exit(255);
	    }
	    if(not $more_filehandles) {
		::warning("Only enough file handles to run ".
			  $system_limit. " jobs in parallel.",
			  "Running 'parallel -j0 -N $system_limit --pipe parallel -j0' or",
			  "raising 'ulimit -n' or 'nofile' in /etc/security/limits.conf",
			  "or /proc/sys/fs/file-max may help.");
	    }
	    if($max_system_proc_reached) {
		::warning("Only enough available processes to run ".
			  $system_limit. " jobs in parallel.",
			  "Raising ulimit -u or /etc/security/limits.conf ",
			  "or /proc/sys/kernel/pid_max may help.");
	    }
	}
	if($] == 5.008008 and $system_limit > 1000) {
	    # https://savannah.gnu.org/bugs/?36942
	    $system_limit = 1000;
	}
	if($Global::JobQueue->empty()) {
	    $system_limit ||= 1;
	}
	if($self->string() ne ":" and
	   $system_limit > $Global::default_simultaneous_sshlogins) {
	    $system_limit =
		$self->simultaneous_sshlogin_limit($system_limit);
	}
	return $system_limit;
    }
}

sub simultaneous_sshlogin_limit($) {
    # Test by logging in wanted number of times simultaneously
    # Returns:
    #   min($wanted_processes,$working_simultaneous_ssh_logins-1)
    my $self = shift;
    my $wanted_processes = shift;
    if($self->{'time_to_login'}) {
	return $wanted_processes;
    }

    # Try twice because it guesses wrong sometimes
    # Choose the minimal
    my $ssh_limit =
        ::min($self->simultaneous_sshlogin($wanted_processes),
	      $self->simultaneous_sshlogin($wanted_processes));
    if($ssh_limit < $wanted_processes) {
        my $serverlogin = $self->serverlogin();
        ::warning("ssh to $serverlogin only allows ".
		  "for $ssh_limit simultaneous logins.",
		  "You may raise this by changing",
		  "/etc/ssh/sshd_config:MaxStartups and MaxSessions on $serverlogin.",
		  "You can also try --sshdelay 0.1",
		  "Using only ".($ssh_limit-1)." connections ".
		  "to avoid race conditions.");
	# Race condition can cause problem if using all sshs.
	if($ssh_limit > 1) { $ssh_limit -= 1; }
    }
    return $ssh_limit;
}

sub simultaneous_sshlogin($) {
    # Using $sshlogin try to see if we can do $wanted_processes
    # simultaneous logins
    # (ssh host echo simul-login & ssh host echo simul-login & ...) |
    #   grep simul|wc -l
    # Input:
    #   $wanted_processes = Try for this many logins in parallel
    # Returns:
    #   $ssh_limit = Number of succesful parallel logins
    local $/ = "\n";
    my $self = shift;
    my $wanted_processes = shift;
    my $sshcmd = $self->sshcommand();
    my $serverlogin = $self->serverlogin();
    my $sshdelay = $opt::sshdelay ? "sleep $opt::sshdelay;" : "";
    # TODO sh -c wrapper to work for csh
    my $cmd = ("$sshdelay$sshcmd $serverlogin -- ".
	       "echo simultaneouslogin </dev/null 2>&1 &")x$wanted_processes;
    ::debug("init", "Trying $wanted_processes logins at $serverlogin\n");
    open (my $simul_fh, "-|", "($cmd)|grep simultaneouslogin | wc -l") or
	::die_bug("simultaneouslogin");
    my $ssh_limit = <$simul_fh>;
    close $simul_fh;
    chomp $ssh_limit;
    return $ssh_limit;
}

sub set_ncpus($$) {
    my $self = shift;
    $self->{'ncpus'} = shift;
}

sub user_requested_processes($) {
    # Parse the number of processes that the user asked for using -j
    # Input:
    #   $opt_P = string formatted as for -P
    # Returns:
    #   $processes = the number of processes to run on this sshlogin
    my $self = shift;
    my $opt_P = shift;
    my $processes;
    if(defined $opt_P) {
        if($opt_P =~ /^\+(\d+)$/) {
            # E.g. -P +2
            my $j = $1;
            $processes =
                $self->ncpus() + $j;
        } elsif ($opt_P =~ /^-(\d+)$/) {
            # E.g. -P -2
            my $j = $1;
            $processes =
                $self->ncpus() - $j;
        } elsif ($opt_P =~ /^(\d+(\.\d+)?)\%$/) {
            # E.g. -P 10.5%
            my $j = $1;
            $processes =
                $self->ncpus() * $j / 100;
        } elsif ($opt_P =~ /^(\d+)$/) {
            $processes = $1;
            if($processes == 0) {
                # -P 0 = infinity (or at least close)
                $processes = $Global::infinity;
            }
        } elsif (-f $opt_P) {
            $Global::max_procs_file = $opt_P;
            if(open(my $in_fh, "<", $Global::max_procs_file)) {
                my $opt_P_file = join("",<$in_fh>);
                close $in_fh;
                $processes = $self->user_requested_processes($opt_P_file);
            } else {
                ::error("Cannot open $opt_P.");
                ::wait_and_exit(255);
            }
        } else {
            ::error("Parsing of --jobs/-j/--max-procs/-P failed.");
            ::die_usage();
        }
	$processes = ::ceil($processes);
    }
    return $processes;
}

sub ncpus($) {
    # Number of CPU threads
    # --use_sockets_instead_of_threads = count socket instead
    # --use_cores_instead_of_threads = count physical cores instead
    # Returns:
    #   $ncpus = number of cpu (threads) on this sshlogin
    local $/ = "\n";
    my $self = shift;
    if(not defined $self->{'ncpus'}) {
        my $sshcmd = $self->sshcommand();
        my $serverlogin = $self->serverlogin();
        if($serverlogin eq ":") {
            if($opt::use_sockets_instead_of_threads) {
                $self->{'ncpus'} = socket_core_thread()->{'sockets'};
	    } elsif($opt::use_cores_instead_of_threads) {
                $self->{'ncpus'} = socket_core_thread()->{'cores'};
            } else {
                $self->{'ncpus'} = socket_core_thread()->{'threads'};
            }
        } else {
            my $ncpu;
            if($opt::use_sockets_instead_of_threads
	       or
		$opt::use_cpus_instead_of_cores) {
                $ncpu =
		    ::qqx("echo|$sshcmd $serverlogin -- parallel --number-of-sockets");
	    } elsif($opt::use_cores_instead_of_threads) {
                $ncpu =
		    ::qqx("echo|$sshcmd $serverlogin -- parallel --number-of-cores");
            } else {
                $ncpu =
		    ::qqx("echo|$sshcmd $serverlogin -- parallel --number-of-threads");
            }
	    chomp $ncpu;
            if($ncpu =~ /^\s*[0-9]+\s*$/s) {
                $self->{'ncpus'} = $ncpu;
            } else {
                ::warning("Could not figure out ".
			  "number of cpus on $serverlogin ($ncpu). Using 1.");
                $self->{'ncpus'} = 1;
            }
        }
    }
    return $self->{'ncpus'};
}


sub nproc() {
    # Returns:
    #   Number of threads using `nproc`
    my $no_of_threads = ::qqx("nproc");
    chomp $no_of_threads;
    return $no_of_threads;
}

sub no_of_sockets() {
    return socket_core_thread()->{'sockets'};
}

sub no_of_cores() {
    return socket_core_thread()->{'cores'};
}

sub no_of_threads() {
    return socket_core_thread()->{'threads'};
}

sub socket_core_thread() {
    # Returns:
    #   {
    #     'sockets' => #sockets = number of socket with CPU present
    #     'cores' => #cores = number of physical cores
    #     'threads' => #threads = number of compute cores (hyperthreading)
    #     'active' => #taskset_threads = number of taskset limited cores
    #   }
    my $cpu;
    my $cached_cpuspec = $Global::cache_dir . "/tmp/sshlogin/" .
	::hostname() . "/cpuspec";
    if(-e $cached_cpuspec and -M $cached_cpuspec < 1) {
	# Reading cached copy instead of /proc/cpuinfo is 17 ms faster
	local $/ = "\n";
	if(open(my $in_fh, "<", $cached_cpuspec)) {
	    ::debug("init","Read $cached_cpuspec\n");
	    $cpu->{'sockets'} = int(<$in_fh>);
	    $cpu->{'cores'} = int(<$in_fh>);
	    $cpu->{'threads'} = int(<$in_fh>);
	    close $in_fh;
	}
    }
    if ($^O eq 'linux') {
	$cpu = sct_gnu_linux($cpu);
    } elsif ($^O eq 'android') {
	$cpu = sct_android($cpu);
    } elsif ($^O eq 'freebsd') {
	$cpu = sct_freebsd($cpu);
    } elsif ($^O eq 'netbsd') {
	$cpu = sct_netbsd($cpu);
    } elsif ($^O eq 'openbsd') {
	$cpu = sct_openbsd($cpu);
    } elsif ($^O eq 'gnu') {
	$cpu = sct_hurd($cpu);
    } elsif ($^O eq 'darwin') {
	$cpu = sct_darwin($cpu);
    } elsif ($^O eq 'solaris') {
	$cpu = sct_solaris($cpu);
    } elsif ($^O eq 'aix') {
	$cpu = sct_aix($cpu);
    } elsif ($^O eq 'hpux') {
	$cpu = sct_hpux($cpu);
    } elsif ($^O eq 'nto') {
	$cpu = sct_qnx($cpu);
    } elsif ($^O eq 'svr5') {
	$cpu = sct_openserver($cpu);
    } elsif ($^O eq 'irix') {
	$cpu = sct_irix($cpu);
    } elsif ($^O eq 'dec_osf') {
	$cpu = sct_tru64($cpu);
    } else {
	# Try all methods until we find something that works
	$cpu = (sct_gnu_linux($cpu)
		|| sct_android($cpu)
		|| sct_freebsd($cpu)
		|| sct_netbsd($cpu)
		|| sct_openbsd($cpu)
		|| sct_hurd($cpu)
		|| sct_darwin($cpu)
		|| sct_solaris($cpu)
		|| sct_aix($cpu)
		|| sct_hpux($cpu)
		|| sct_qnx($cpu)
		|| sct_openserver($cpu)
		|| sct_irix($cpu)
		|| sct_tru64($cpu)
	    );
    }
    if(not grep { $_ > 0 } values %$cpu) {
	$cpu = undef;
    }
    # Write cached copy instead of /proc/cpuinfo is 17 ms faster
    if($cpu and open(my $out_fh, ">", $cached_cpuspec)) {
	print $out_fh (map { chomp; "$_\n" }
		       $cpu->{'sockets'},
		       $cpu->{'cores'},
		       $cpu->{'threads'});
	close $out_fh;
    }
    if(not $cpu) {
	my $nproc = nproc();
	if($nproc) {
	    $cpu->{'sockets'} =
		$cpu->{'cores'} =
		$cpu->{'threads'} =
		$cpu->{'active'} =
		$nproc;
	}
    }
    if(not $cpu) {
	::warning("Cannot figure out number of cpus. Using 1.");
	$cpu->{'sockets'} =
	    $cpu->{'cores'} =
	    $cpu->{'threads'} =
	    $cpu->{'active'} =
	    1
    }
    $cpu->{'sockets'} ||= 1;
    $cpu->{'threads'} ||= $cpu->{'cores'};
    $cpu->{'active'} ||= $cpu->{'threads'};
    chomp($cpu->{'sockets'},
	  $cpu->{'cores'},
	  $cpu->{'threads'},
	  $cpu->{'active'});
    # Choose minimum of active and actual
    my $mincpu;
    $mincpu->{'sockets'} = ::min($cpu->{'sockets'},$cpu->{'active'});
    $mincpu->{'cores'} = ::min($cpu->{'cores'},$cpu->{'active'});
    $mincpu->{'threads'} = ::min($cpu->{'threads'},$cpu->{'active'});
    return $mincpu;
}

sub sct_gnu_linux($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    my $cpu = shift;
    local $/ = "\n"; # If delimiter is set, then $/ will be wrong
    my @cpuinfo;
    if($ENV{'PARALLEL_CPUINFO'}) {
	# Use CPUINFO from environment - used for testing only
	@cpuinfo = split/(?<=\n)/,$ENV{'PARALLEL_CPUINFO'};
    } elsif($cpu->{'sockets'} and $cpu->{'cores'} and
	    $cpu->{'threads'}) {
	# Skip /proc/cpuinfo - already set
    } elsif(open(my $in_fh, "<", "/proc/cpuinfo")) {
	# Read /proc/cpuinfo
	@cpuinfo = <$in_fh>;
    }
    if(@cpuinfo) {
	$cpu->{'sockets'} = 0;
	$cpu->{'cores'} = 0;
	$cpu->{'threads'} = 0;
	my %seen;
	my %phy_seen;
	my $physicalid;
	for(@cpuinfo) {
	    if(/^physical id.*[:](.*)/) {
		$physicalid = $1;
		if(not $phy_seen{$1}++) {
		    $cpu->{'sockets'}++;
		}
	    }
	    if(/^core id.*[:](.*)/ and not $seen{$physicalid,$1}++) {
		$cpu->{'cores'}++;
	    }
	    /^processor.*[:]/i and $cpu->{'threads'}++;
	}
	$cpu->{'cores'} ||= $cpu->{'threads'} || $cpu->{'sockets'};
    }
    if(-e "/proc/self/status" and not $ENV{'PARALLEL_CPUINFO'}) {
	# if 'taskset' is used to limit number of threads
	if(open(my $in_fh, "<", "/proc/self/status")) {
	    while(<$in_fh>) {
		if(/^Cpus_allowed:\s*(\S+)/) {
		    my $a = $1;
		    $a =~ tr/,//d;
		    $cpu->{'active'} = unpack ("%32b*", pack ("H*",$a));
		}
	    }
	    close $in_fh;
	}
    }
    return $cpu;
}

sub sct_android($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    # Use GNU/Linux
    return sct_gnu_linux($_[0]);
}

sub sct_freebsd($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    $cpu->{'cores'} ||=
	(::qqx(qq{ sysctl -a dev.cpu | grep \%parent | awk '{ print \$2 }' | uniq | wc -l | awk '{ print \$1 }' })
	 or
	 ::qqx(qq{ sysctl hw.ncpu | awk '{ print \$2 }' }));
    $cpu->{'threads'} ||=
	(::qqx(qq{ sysctl hw.ncpu | awk '{ print \$2 }' })
	 or
	 ::qqx(qq{ sysctl -a dev.cpu | grep \%parent | awk '{ print \$2 }' | uniq | wc -l | awk '{ print \$1 }' }));
    return $cpu;
}

sub sct_netbsd($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    $cpu->{'cores'} ||= ::qqx("sysctl -n hw.ncpu");
    return $cpu;
}

sub sct_openbsd($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    $cpu->{'cores'} ||= ::qqx('sysctl -n hw.ncpu');
    return $cpu;
}

sub sct_hurd($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    $cpu->{'cores'} ||= ::qqx("nproc");
    return $cpu;
}

sub sct_darwin($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    $cpu->{'cores'} ||=
	(::qqx('sysctl -n hw.physicalcpu')
	 or
	 ::qqx(qq{ sysctl -a hw | grep [^a-z]physicalcpu[^a-z] | awk '{ print \$2 }' }));
    $cpu->{'threads'} ||=
	(::qqx('sysctl -n hw.logicalcpu')
	 or
	 ::qqx(qq{ sysctl -a hw | grep [^a-z]logicalcpu[^a-z] | awk '{ print \$2 }' }));
    return $cpu;
}

sub sct_solaris($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    if(not $cpu->{'cores'}) {
	if(-x "/usr/bin/kstat") {
	    my @chip_id = ::qqx("/usr/bin/kstat cpu_info|grep chip_id");
	    if($#chip_id >= 0) {
		$cpu->{'sockets'} ||= $#chip_id +1;
	    }
	    my @core_id = ::qqx("/usr/bin/kstat -m cpu_info|grep -w core_id|uniq");
	    if($#core_id >= 0) {
		$cpu->{'cores'} ||= $#core_id +1;
	    }
	}
	if(-x "/usr/sbin/psrinfo") {
	    my @psrinfo = ::qqx("/usr/sbin/psrinfo -p");
	    if($#psrinfo >= 0) {
		$cpu->{'sockets'} ||= $psrinfo[0];
	    }
	}
	if(-x "/usr/sbin/prtconf") {
	    my @prtconf = ::qqx("/usr/sbin/prtconf | grep cpu..instance");
	    if($#prtconf >= 0) {
		$cpu->{'cores'} ||= $#prtconf +1;
	    }
	}
    }
    return $cpu;
}

sub sct_aix($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    if(not $cpu->{'cores'}) {
	if(-x "/usr/sbin/lscfg") {
	    if(open(my $in_fh, "-|", "/usr/sbin/lscfg -vs |grep proc | wc -l|tr -d ' '")) {
		$cpu->{'cores'} = <$in_fh>;
		close $in_fh;
	    }
	}
    }
    if(not $cpu->{'threads'}) {
	if(-x "/usr/bin/vmstat") {
	    if(open(my $in_fh, "-|", "/usr/bin/vmstat 1 1")) {
		while(<$in_fh>) {
		    /lcpu=([0-9]*) / and $cpu->{'threads'} = $1;
		}
		close $in_fh;
	    }
	}
    }
    return $cpu;
}

sub sct_hpux($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    $cpu->{'cores'} ||=
        ::qqx(qq{ /usr/bin/mpsched -s 2>&1 | grep 'Locality Domain Count' | awk '{ print \$4 }'});
    $cpu->{'threads'} ||=
        ::qqx(qq{ /usr/bin/mpsched -s 2>&1 | perl -ne '/Processor Count\\D+(\\d+)/ and print "\$1"'});
    return $cpu;
}

sub sct_qnx($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    # BUG: It is not known how to calculate this.

    return $cpu;
}

sub sct_openserver($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    if(not $cpu->{'cores'}) {
	if(-x "/usr/sbin/psrinfo") {
	    my @psrinfo = ::qqx("/usr/sbin/psrinfo");
	    if($#psrinfo >= 0) {
		$cpu->{'cores'} = $#psrinfo +1;
	    }
	}
    }
    $cpu->{'sockets'} ||= $cpu->{'cores'};
    return $cpu;
}

sub sct_irix($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    $cpu->{'cores'} ||=
	::qqx(qq{ hinv | grep HZ | grep Processor | awk '{print \$1}' });
    return $cpu;
}

sub sct_tru64($) {
    # Returns:
    #   { 'sockets' => #sockets
    #     'cores' => #cores
    #     'threads' => #threads
    #     'active' => #taskset_threads }
    local $/ = "\n";
    my $cpu = shift;
    $cpu->{'cores'} ||= ::qqx("sizer -pr");
    $cpu->{'sockets'} ||= $cpu->{'cores'};
    $cpu->{'threads'} ||= $cpu->{'cores'};

    return $cpu;
}

sub sshcommand($) {
    # Returns:
    #   $sshcommand = the command (incl options) to run when using ssh
    my $self = shift;
    if (not defined $self->{'sshcommand'}) {
        $self->sshcommand_of_sshlogin();
    }
    return $self->{'sshcommand'};
}

sub serverlogin($) {
    # Returns:
    #   $sshcommand = the command (incl options) to run when using ssh
    my $self = shift;
    if (not defined $self->{'serverlogin'}) {
        $self->sshcommand_of_sshlogin();
    }
    return $self->{'serverlogin'};
}

sub sshcommand_of_sshlogin($) {
    # Compute ssh command and serverlogin from sshlogin
    # 'server' -> ('ssh -S /tmp/parallel-ssh-RANDOM/host-','server')
    # 'user@server' -> ('ssh','user@server')
    # 'myssh user@server' -> ('myssh','user@server')
    # 'myssh -l user server' -> ('myssh -l user','server')
    # '/usr/bin/myssh -l user server' -> ('/usr/bin/myssh -l user','server')
    # Sets:
    #   $self->{'sshcommand'}
    #   $self->{'serverlogin'}
    my $self = shift;
    my ($sshcmd, $serverlogin);
    # If $opt::ssh is unset, use $PARALLEL_SSH or 'ssh'
    $opt::ssh ||= $ENV{'PARALLEL_SSH'} || "ssh";
    if($self->{'string'} =~ /(.+) (\S+)$/) {
        # Own ssh command
        $sshcmd = $1; $serverlogin = $2;
    } else {
        # Normal ssh
        if($opt::controlmaster) {
            # Use control_path to make ssh faster
            my $control_path = $self->control_path_dir()."/ssh-%r@%h:%p";
            $sshcmd = $opt::ssh." -S ".$control_path;
            $serverlogin = $self->{'string'};
            if(not $self->{'control_path'}{$control_path}++) {
                # Master is not running for this control_path
                # Start it
                my $pid = fork();
                if($pid) {
                    $Global::sshmaster{$pid} ||= 1;
                } else {
		    $SIG{'TERM'} = undef;
                    # Ignore the 'foo' being printed
                    open(STDOUT,">","/dev/null");
                    # STDERR >/dev/null to ignore
                    open(STDERR,">","/dev/null");
                    open(STDIN,"<","/dev/null");
                    # Run a sleep that outputs data, so it will discover
		    # if the ssh connection closes.
                    my $sleep = ::Q('$|=1;while(1){sleep 1;print "foo\n"}');
                    my @master = ($opt::ssh, "-MTS",
				  $control_path, $serverlogin, "--", "perl", "-e",
				  $sleep);
                    exec(@master);
                }
            }
        } else {
            $sshcmd = $opt::ssh; $serverlogin = $self->{'string'};
        }
    }

    if($serverlogin =~ s/(\S+)\@(\S+)/$2/) {
	# convert user@server to '-l user server'
	# because lsh does not support user@server
	$sshcmd = $sshcmd." -l ".$1;
    }

    $self->{'sshcommand'} = $sshcmd;
    $self->{'serverlogin'} = $serverlogin;
}

sub control_path_dir($) {
    # Returns:
    #   $control_path_dir = dir of control path (for -M)
    my $self = shift;
    if(not defined $self->{'control_path_dir'}) {
        $self->{'control_path_dir'} =
	    # Use $ENV{'TMPDIR'} as that is typically not
	    # NFS mounted
	    File::Temp::tempdir($ENV{'TMPDIR'}
				. "/control_path_dir-XXXX",
				CLEANUP => 1);
    }
    return $self->{'control_path_dir'};
}

sub rsync_transfer_cmd($) {
    # Command to run to transfer a file
    # Input:
    #   $file = filename of file to transfer
    #   $workdir = destination dir
    # Returns:
    #   $cmd = rsync command to run to transfer $file ("" if unreadable)
    my $self = shift;
    my $file = shift;
    my $workdir = shift;
    if(not -r $file) {
	::warning($file. " is not readable and will not be transferred.");
	return "true";
    }
    my $rsync_destdir;
    my $relpath = ($file !~ m:^/:) || ($file =~ m:/\./:); # Is the path relative or /./?
    if($relpath) {
	$rsync_destdir = ::shell_quote_file($workdir);
    } else {
	# rsync /foo/bar /
	$rsync_destdir = "/";
    }
    $file = ::shell_quote_file($file);
    my $sshcmd = $self->sshcommand();
    my $rsync_opts = $ENV{'PARALLEL_RSYNC_OPTS'}.
	" -e".::Q($sshcmd);
    my $serverlogin = $self->serverlogin();
    # Make dir if it does not exist
    return "$sshcmd $serverlogin -- mkdir -p $rsync_destdir && " .
	rsync()." $rsync_opts $file $serverlogin:$rsync_destdir";
}

sub cleanup_cmd($$$) {
    # Command to run to remove the remote file
    # Input:
    #   $file = filename to remove
    #   $workdir = destination dir
    # Returns:
    #   $cmd = ssh command to run to remove $file and empty parent dirs
    my $self = shift;
    my $file = shift;
    my $workdir = shift;
    my $f = $file;
    if($f =~ m:/\./:) {
	# foo/bar/./baz/quux => workdir/baz/quux
	# /foo/bar/./baz/quux => workdir/baz/quux
	$f =~ s:.*/\./:$workdir/:;
    } elsif($f =~ m:^[^/]:) {
	# foo/bar => workdir/foo/bar
	$f = $workdir."/".$f;
    }
    my @subdirs = split m:/:, ::dirname($f);
    my @rmdir;
    my $dir = "";
    for(@subdirs) {
	$dir .= $_."/";
	unshift @rmdir, ::shell_quote_file($dir);
    }
    my $rmdir = @rmdir ? "sh -c ".::Q("rmdir @rmdir 2>/dev/null;") : "";
    if(defined $opt::workdir and $opt::workdir eq "...") {
	$rmdir .= ::Q("rm -rf " . ::shell_quote_file($workdir).';');
    }

    $f = ::shell_quote_file($f);
    my $sshcmd = $self->sshcommand();
    my $serverlogin = $self->serverlogin();
    return "$sshcmd $serverlogin -- ".::Q("rm -f $f; $rmdir");
}

{
    my $rsync;

    sub rsync {
	# rsync 3.1.x uses protocol 31 which is unsupported by 2.5.7.
	# If the version >= 3.1.0: downgrade to protocol 30
	# Returns:
	#   $rsync = "rsync" or "rsync --protocol 30"
	if(not $rsync) {
	    my @out = `rsync --version`;
	    for (@out) {
		if(/version (\d+.\d+)(.\d+)?/) {
		    if($1 >= 3.1) {
			# Version 3.1.0 or later: Downgrade to protocol 30
			$rsync = "rsync --protocol 30";
		    } else {
			$rsync = "rsync";
		    }
		}
	    }
	    $rsync or ::die_bug("Cannot figure out version of rsync: @out");
	}
	return $rsync;
    }
}


package JobQueue;

sub new($) {
    my $class = shift;
    my $commandref = shift;
    my $read_from = shift;
    my $context_replace = shift;
    my $max_number_of_args = shift;
    my $transfer_files = shift;
    my $return_files = shift;
    my $commandlinequeue = CommandLineQueue->new
	($commandref, $read_from, $context_replace, $max_number_of_args,
	 $transfer_files, $return_files);
    my @unget = ();
    return bless {
        'unget' => \@unget,
        'commandlinequeue' => $commandlinequeue,
        'this_job_no' => 0,
        'total_jobs' => undef,
    }, ref($class) || $class;
}

sub get($) {
    my $self = shift;

    $self->{'this_job_no'}++;
    if(@{$self->{'unget'}}) {
        return shift @{$self->{'unget'}};
    } else {
        my $commandline = $self->{'commandlinequeue'}->get();
        if(defined $commandline) {
            return Job->new($commandline);
        } else {
	    $self->{'this_job_no'}--;
            return undef;
        }
    }
}

sub unget($) {
    my $self = shift;
    unshift @{$self->{'unget'}}, @_;
    $self->{'this_job_no'} -= @_;
}

sub empty($) {
    my $self = shift;
    my $empty = (not @{$self->{'unget'}}) &&
	$self->{'commandlinequeue'}->empty();
    ::debug("run", "JobQueue->empty $empty ");
    return $empty;
}

sub total_jobs($) {
    my $self = shift;
    if(not defined $self->{'total_jobs'}) {
	if($opt::pipe and not $opt::tee) {
	    ::error("--pipe is incompatible with --eta/--bar/--shuf");
	    ::wait_and_exit(255);
	}
	if($opt::sqlworker) {
	    $self->{'total_jobs'} = $Global::sql->total_jobs();
	} else {
	    my $record;
	    my @arg_records;
	    my $record_queue = $self->{'commandlinequeue'}{'arg_queue'};
	    my $start = time;
	    while($record = $record_queue->get()) {
		push @arg_records, $record;
		if(time - $start > 10) {
		    ::warning("Reading ".scalar(@arg_records).
			      " arguments took longer than 10 seconds.");
		    $opt::eta && ::warning("Consider removing --eta.");
		    $opt::bar && ::warning("Consider removing --bar.");
		    $opt::shuf && ::warning("Consider removing --shuf.");
		    last;
		}
	    }
	    while($record = $record_queue->get()) {
		push @arg_records, $record;
	    }
	    if($opt::shuf and @arg_records) {
		my $i = @arg_records;
		while (--$i) {
		    my $j = int rand($i+1);
		    @arg_records[$i,$j] = @arg_records[$j,$i];
		}
	    }
	    $record_queue->unget(@arg_records);
	    # $#arg_records = number of args - 1
	    # We have read one @arg_record for this job (so add 1 more)
	    my $num_args = $#arg_records + 2;
	    # This jobs is not started so -1
	    my $started_jobs = $self->{'this_job_no'} - 1;
	    my $max_args = ::max($Global::max_number_of_args,1);
	    $self->{'total_jobs'} = ::ceil($num_args / $max_args)
		+ $started_jobs;
	    ::debug("init","Total jobs: ".$self->{'total_jobs'}.
		    " ($num_args/$max_args + $started_jobs)\n");
	}
    }
    return $self->{'total_jobs'};
}

sub flush_total_jobs($) {
    # Unset total_jobs to force recomputing
    my $self = shift;
    ::debug("init","flush Total jobs: ");
    $self->{'total_jobs'} = undef;
}

sub next_seq($) {
    my $self = shift;

    return $self->{'commandlinequeue'}->seq();
}

sub quote_args($) {
    my $self = shift;
    return $self->{'commandlinequeue'}->quote_args();
}


package Job;

sub new($) {
    my $class = shift;
    my $commandlineref = shift;
    return bless {
        'commandline' => $commandlineref, # CommandLine object
        'workdir' => undef, # --workdir
        # filehandle for stdin (used for --pipe)
	# filename for writing stdout to (used for --files)
        # remaining data not sent to stdin (used for --pipe)
	# tmpfiles to cleanup when job is done
	'unlink' => [],
	# amount of data sent via stdin (used for --pipe)
        'transfersize' => 0, # size of files using --transfer
        'returnsize' => 0, # size of files using --return
        'pid' => undef,
        # hash of { SSHLogins => number of times the command failed there }
        'failed' => undef,
        'sshlogin' => undef,
        # The commandline wrapped with rsync and ssh
        'sshlogin_wrap' => undef,
        'exitstatus' => undef,
        'exitsignal' => undef,
	# Timestamp for timeout if any
	'timeout' => undef,
	'virgin' => 1,
	# Output used for SQL and CSV-output
	'output' => { 1 => [], 2 => [] },
	'halfline' => { 1 => [], 2 => [] },
    }, ref($class) || $class;
}

sub replaced($) {
    my $self = shift;
    $self->{'commandline'} or ::die_bug("commandline empty");
    return $self->{'commandline'}->replaced();
}

sub seq($) {
    my $self = shift;
    return $self->{'commandline'}->seq();
}

sub set_seq($$) {
    my $self = shift;
    return $self->{'commandline'}->set_seq(shift);
}

sub slot($) {
    my $self = shift;
    return $self->{'commandline'}->slot();
}

sub free_slot($) {
    my $self = shift;
    push @Global::slots, $self->slot();
}

{
    my($cattail);

    sub cattail() {
	# Returns:
	#   $cattail = perl program for:
	#     cattail "decompress program" writerpid [file_to_decompress or stdin] [file_to_unlink]
	if(not $cattail) {
	    $cattail = q{
		# cat followed by tail (possibly with rm as soon at the file is opened)
		# If $writerpid dead: finish after this round
		use Fcntl;
		$|=1;

		my ($comfile, $cmd, $writerpid, $read_file, $unlink_file) = @ARGV;
		if($read_file) {
		    open(IN,"<",$read_file) || die("cattail: Cannot open $read_file");
		} else {
		    *IN = *STDIN;
		}
		while(! -s $comfile) {
		    # Writer has not opened the buffer file, so we cannot remove it yet
		    $sleep = ($sleep < 30) ? ($sleep * 1.001 + 0.01) : ($sleep);
		    usleep($sleep);
		}
		# The writer and we have both opened the file, so it is safe to unlink it
		unlink $unlink_file;
		unlink $comfile;

		my $first_round = 1;
		my $flags;
		fcntl(IN, F_GETFL, $flags) || die $!; # Get the current flags on the filehandle
		$flags |= O_NONBLOCK; # Add non-blocking to the flags
		fcntl(IN, F_SETFL, $flags) || die $!; # Set the flags on the filehandle

		while(1) {
		    # clear EOF
		    seek(IN,0,1);
		    my $writer_running = kill 0, $writerpid;
		    $read = sysread(IN,$buf,131072);
		    if($read) {
			if($first_round) {
			    # Only start the command if there any input to process
			    $first_round = 0;
			    open(OUT,"|-",$cmd) || die("cattail: Cannot run $cmd");
			}

			# Blocking print
			while($buf) {
			    my $bytes_written = syswrite(OUT,$buf);
			    # syswrite may be interrupted by SIGHUP
			    substr($buf,0,$bytes_written) = "";
			}
			# Something printed: Wait less next time
			$sleep /= 2;
		    } else {
			if(eof(IN) and not $writer_running) {
			    # Writer dead: There will never be sent more to the decompressor
			    close OUT;
			    exit;
			}
			# TODO This could probably be done more efficiently using select(2)
			# Nothing read: Wait longer before next read
			# Up to 100 milliseconds
			$sleep = ($sleep < 100) ? ($sleep * 1.001 + 0.01) : ($sleep);
			usleep($sleep);
		    }
		}

		sub usleep {
		    # Sleep this many milliseconds.
		    my $secs = shift;
		    select(undef, undef, undef, $secs/1000);
		}
	    };
	    $cattail =~ s/#.*//mg;
	    $cattail =~ s/\s+/ /g;
	}
	return $cattail;
    }
}

sub openoutputfiles($) {
    # Open files for STDOUT and STDERR
    # Set file handles in $self->fh
    my $self = shift;
    my ($outfhw, $errfhw, $outname, $errname);

    if($opt::linebuffer and not
       ($opt::keeporder or $opt::files or $opt::results or
	$opt::compress or $opt::compress_program or
	$opt::decompress_program)) {
	# Do not save to files: Use non-blocking pipe
	my ($outfhr, $errfhr);
	pipe($outfhr, $outfhw) || die;
	pipe($errfhr, $errfhw) || die;
	$self->set_fh(1,'w',$outfhw);
	$self->set_fh(2,'w',$errfhw);
	$self->set_fh(1,'r',$outfhr);
	$self->set_fh(2,'r',$errfhr);
	# Make it possible to read non-blocking from the pipe
	for my $fdno (1,2) {
	    ::set_fh_non_blocking($self->fh($fdno,'r'));
	}
	# Return immediately because we do not need setting filenames
	return;
    } elsif($opt::results and not $Global::csvsep) {
	my $out = $self->{'commandline'}->results_out();
	my $seqname;
	if($out eq $opt::results or $out =~ m:/$:) {
	    # $opt::results = simple string or ending in /
	    # => $out is a dir/
	    # prefix/name1/val1/name2/val2/seq
	    $seqname = $out."seq";
	    # prefix/name1/val1/name2/val2/stdout
	    $outname = $out."stdout";
	    # prefix/name1/val1/name2/val2/stderr
	    $errname = $out."stderr";
	} else {
	    # $opt::results = replacement string not ending in /
	    # => $out is a file
	    $outname = $out;
	    $errname = "$out.err";
	    $seqname = "$out.seq";
	}
	my $seqfhw;
	if(not open($seqfhw, "+>", $seqname)) {
	    ::error("Cannot write to `$seqname'.");
	    ::wait_and_exit(255);
	}
	print $seqfhw $self->seq();
	close $seqfhw;
	if(not open($outfhw, "+>", $outname)) {
	    ::error("Cannot write to `$outname'.");
	    ::wait_and_exit(255);
	}
	if(not open($errfhw, "+>", $errname)) {
	    ::error("Cannot write to `$errname'.");
	    ::wait_and_exit(255);
	}
	$self->set_fh(1,"unlink","");
	$self->set_fh(2,"unlink","");
	if($opt::sqlworker) {
	    # Save the filenames in SQL table
	    $Global::sql->update("SET Stdout = ?, Stderr = ? ".
				 "WHERE Seq = ". $self->seq(),
				 $outname, $errname);
	}
    } elsif(not $opt::ungroup) {
	# To group we create temporary files for STDOUT and STDERR
	# To avoid the cleanup unlink the files immediately (but keep them open)
	if($opt::files) {
	    ($outfhw, $outname) = ::tmpfile(SUFFIX => ".par");
	    ($errfhw, $errname) = ::tmpfile(SUFFIX => ".par");
	    # --files => only remove stderr
	    $self->set_fh(1,"unlink","");
	    $self->set_fh(2,"unlink",$errname);
	} else {
	    ($outfhw, $outname) = ::tmpfile(SUFFIX => ".par");
	    ($errfhw, $errname) = ::tmpfile(SUFFIX => ".par");
	    $self->set_fh(1,"unlink",$outname);
	    $self->set_fh(2,"unlink",$errname);
	}
    } else {
	# --ungroup
	open($outfhw,">&",$Global::fd{1}) || die;
	open($errfhw,">&",$Global::fd{2}) || die;
	# File name must be empty as it will otherwise be printed
	$outname = "";
	$errname = "";
	$self->set_fh(1,"unlink",$outname);
	$self->set_fh(2,"unlink",$errname);
    }
    # Set writing FD
    $self->set_fh(1,'w',$outfhw);
    $self->set_fh(2,'w',$errfhw);
    $self->set_fh(1,'name',$outname);
    $self->set_fh(2,'name',$errname);
    if($opt::compress) {
	$self->filter_through_compress();
    } elsif(not $opt::ungroup) {
	$self->grouped();
    }
    if($opt::linebuffer) {
	# Make it possible to read non-blocking from
	# the buffer files
	# Used for --linebuffer with -k, --files, --res, --compress*
	for my $fdno (1,2) {
	    ::set_fh_non_blocking($self->fh($fdno,'r'));
	}
    }
}

sub print_verbose_dryrun($) {
    # If -v set: print command to stdout (possibly buffered)
    # This must be done before starting the command
    my $self = shift;
    if($Global::verbose or $opt::dryrun) {
	my $fh = $self->fh(1,"w");
	if($Global::verbose <= 1) {
	    print $fh $self->replaced(),"\n";
	} else {
	    # Verbose level > 1: Print the rsync and stuff
	    print $fh $self->wrapped(),"\n";
	}
    }
    if($opt::sqlworker) {
	$Global::sql->update("SET Command = ? WHERE Seq = ".$self->seq(),
			     $self->replaced());
    }
}

sub add_rm($) {
    # Files to remove when job is done
    my $self = shift;
    push @{$self->{'unlink'}}, @_;
}

sub get_rm($) {
    # Files to remove when job is done
    my $self = shift;
    return @{$self->{'unlink'}};
}

sub cleanup($) {
    # Remove files when job is done
    my $self = shift;
    unlink $self->get_rm();
    delete @Global::unlink{$self->get_rm()};
}

sub grouped($) {
    my $self = shift;
    # Set reading FD if using --group (--ungroup does not need)
    for my $fdno (1,2) {
	# Re-open the file for reading
	# so fdw can be closed seperately
	# and fdr can be seeked seperately (for --line-buffer)
	open(my $fdr,"<", $self->fh($fdno,'name')) ||
	    ::die_bug("fdr: Cannot open ".$self->fh($fdno,'name'));
	$self->set_fh($fdno,'r',$fdr);
	# Unlink if not debugging
	$Global::debug or ::rm($self->fh($fdno,"unlink"));
    }
}

sub empty_input_wrapper($) {
    # If no input: exit(0)
    # If some input: Pass input as input to command on STDIN
    # This avoids starting the command if there is no input.
    # Input:
    #   $command = command to pipe data to
    # Returns:
    #   $wrapped_command = the wrapped command
    my $command = shift;
    my $script =
	::spacefree(0,q{
	    if(sysread(STDIN, $buf, 1)) {
		open($fh, "|-", @ARGV) || die;
		syswrite($fh, $buf);
		# Align up to 128k block
		if($read = sysread(STDIN, $buf, 131071)) {
		    syswrite($fh, $buf);
		}
		while($read = sysread(STDIN, $buf, 131072)) {
		    syswrite($fh, $buf);
		}
		close $fh;
		exit ($?&127 ? 128+($?&127) : 1+$?>>8)
	    }
		  });
    ::debug("run",'Empty wrap: perl -e '.::Q($script)."\n");
    if($Global::cshell
       and
       length $command > 499) {
	# csh does not like words longer than 1000 (499 quoted)
	# $command = "perl -e '".base64_zip_eval()."' ".
	# join" ",string_zip_base64(
	#         'exec "'.::perl_quote_scalar($command).'"');
        return 'perl -e '.::Q($script)." ".
	    base64_wrap("exec \"$Global::shell\",'-c',\"".
				   ::perl_quote_scalar($command).'"');
    } else {
	return 'perl -e '.::Q($script)." ".
	    $Global::shell." -c ".::Q($command);
    }
}

sub filter_through_compress($) {
    my $self = shift;
    # Send stdout to stdin for $opt::compress_program(1)
    # Send stderr to stdin for $opt::compress_program(2)
    # cattail get pid:  $pid = $self->fh($fdno,'rpid');
    my $cattail = cattail();

    for my $fdno (1,2) {
	# Make a communication file.
	my ($fh, $comfile) = ::tmpfile(SUFFIX => ".pac");
	close $fh;
	# Compressor: (echo > $comfile; compress pipe) > output
	# When the echo is written to $comfile,
	# it is known that output file is opened,
	# thus output file can then be removed by the decompressor.
        my $wpid = open(my $fdw,"|-", "(echo > $comfile; ".
			empty_input_wrapper($opt::compress_program).") >".
			$self->fh($fdno,'name')) || die $?;
	$self->set_fh($fdno,'w',$fdw);
	$self->set_fh($fdno,'wpid',$wpid);
	# Decompressor: open output; -s $comfile > 0: rm $comfile output;
	#               decompress output > stdout
	my $rpid = open(my $fdr, "-|", "perl", "-e", $cattail, $comfile,
			$opt::decompress_program, $wpid,
			$self->fh($fdno,'name'),$self->fh($fdno,'unlink'))
	    || die $?;
	$self->set_fh($fdno,'r',$fdr);
	$self->set_fh($fdno,'rpid',$rpid);
    }
}



sub set_fh($$$$) {
    # Set file handle
    my ($self, $fd_no, $key, $fh) = @_;
    $self->{'fd'}{$fd_no,$key} = $fh;
}

sub fh($) {
    # Get file handle
    my ($self, $fd_no, $key) = @_;
    return $self->{'fd'}{$fd_no,$key};
}

sub write($) {
    my $self = shift;
    my $remaining_ref = shift;
    my $stdin_fh = $self->fh(0,"w");

    my $len = length $$remaining_ref;
    # syswrite may not write all in one go,
    # so make sure everything is written.
    my $written;

    # If writing is to a closed pipe:
    #   Do not call signal handler, but let nothing be written
    local $SIG{PIPE} = undef;
    while($written = syswrite($stdin_fh,$$remaining_ref)){
	substr($$remaining_ref,0,$written) = "";
    }
}

sub set_block($$$$$$) {
    # Copy stdin buffer from $block_ref up to $endpos
    # Prepend with $header_ref if virgin (i.e. not --roundrobin)
    # Remove $recstart and $recend if needed
    # Input:
    #   $header_ref = ref to $header to prepend
    #   $buffer_ref = ref to $buffer containing the block
    #   $endpos = length of $block to pass on
    #   $recstart = --recstart regexp
    #   $recend = --recend regexp
    # Returns:
    #   N/A
    my $self = shift;
    my ($header_ref,$buffer_ref,$endpos,$recstart,$recend) = @_;
    $self->{'block'} = ($self->virgin() ? $$header_ref : "").
	substr($$buffer_ref,0,$endpos);
    if($opt::remove_rec_sep) {
	remove_rec_sep(\$self->{'block'},$recstart,$recend);
    }
    $self->{'block_length'} = length $self->{'block'};
    $self->{'block_pos'} = 0;
    $self->add_transfersize($self->{'block_length'});
}

sub block_ref($) {
    my $self = shift;
    return \$self->{'block'};
}


sub block_length($) {
    my $self = shift;
    return $self->{'block_length'};
}

sub remove_rec_sep($) {
    # Remove --recstart and --recend from $block
    # Input:
    #   $block_ref = reference to $block to be modified
    #   $recstart = --recstart
    #   $recend = --recend
    # Uses:
    #   $opt::regexp = Are --recstart/--recend regexp?
    # Returns:
    #   N/A
    my ($block_ref,$recstart,$recend) = @_;
    # Remove record separator
    if($opt::regexp) {
	$$block_ref =~ s/$recend$recstart//gos;
	$$block_ref =~ s/^$recstart//os;
	$$block_ref =~ s/$recend$//os;
    } else {
	$$block_ref =~ s/\Q$recend$recstart\E//gos;
	$$block_ref =~ s/^\Q$recstart\E//os;
	$$block_ref =~ s/\Q$recend\E$//os;
    }
}

sub non_blocking_write($) {
    my $self = shift;
    my $something_written = 0;

    my $in = $self->fh(0,"w");
    my $rv = syswrite($in,
		      substr($self->{'block'},$self->{'block_pos'}));
    if (!defined($rv) && $! == ::EAGAIN()) {
	# would block - but would have written
	$something_written = 0;
	# avoid triggering auto expanding block size
	$Global::no_autoexpand_block ||= 1;
    } elsif ($self->{'block_pos'}+$rv != $self->{'block_length'}) {
	# incomplete write
	# Remove the written part
	$self->{'block_pos'} += $rv;
	$something_written = $rv;
    } else {
	# successfully wrote everything
	# Empty block to free memory
	my $a = "";
	$self->set_block(\$a,\$a,0,"","");
	$something_written = $rv;
    }
    ::debug("pipe", "Non-block: ", $something_written);
    return $something_written;
}


sub virgin($) {
    my $self = shift;
    return $self->{'virgin'};
}

sub set_virgin($$) {
    my $self = shift;
    $self->{'virgin'} = shift;
}

sub pid($) {
    my $self = shift;
    return $self->{'pid'};
}

sub set_pid($$) {
    my $self = shift;
    $self->{'pid'} = shift;
}

sub starttime($) {
    # Returns:
    #   UNIX-timestamp this job started
    my $self = shift;
    return sprintf("%.3f",$self->{'starttime'});
}

sub set_starttime($@) {
    my $self = shift;
    my $starttime = shift || ::now();
    $self->{'starttime'} = $starttime;
    $opt::sqlworker and
	$Global::sql->update("SET Starttime = ? WHERE Seq = ".$self->seq(),
			     $starttime);
}

sub runtime($) {
    # Returns:
    #   Run time in seconds with 3 decimals
    my $self = shift;
    return sprintf("%.3f",
		   int(($self->endtime() - $self->starttime())*1000)/1000);
}

sub endtime($) {
    # Returns:
    #   UNIX-timestamp this job ended
    #   0 if not ended yet
    my $self = shift;
    return ($self->{'endtime'} || 0);
}

sub set_endtime($$) {
    my $self = shift;
    my $endtime = shift;
    $self->{'endtime'} = $endtime;
    $opt::sqlworker and
	$Global::sql->update("SET JobRuntime = ? WHERE Seq = ".$self->seq(),
			     $self->runtime());
}

sub is_timedout($) {
    # Is the job timedout?
    # Input:
    #   $delta_time = time that the job may run
    # Returns:
    #   True or false
    my $self = shift;
    my $delta_time = shift;
    return time > $self->{'starttime'} + $delta_time;
}

sub kill($) {
    my $self = shift;
    $self->set_exitstatus(-1);
    ::kill_sleep_seq($self->pid());
}

sub failed($) {
    # return number of times failed for this $sshlogin
    # Input:
    #   $sshlogin
    # Returns:
    #   Number of times failed for $sshlogin
    my $self = shift;
    my $sshlogin = shift;
    return $self->{'failed'}{$sshlogin};
}

sub failed_here($) {
    # return number of times failed for the current $sshlogin
    # Returns:
    #   Number of times failed for this sshlogin
    my $self = shift;
    return $self->{'failed'}{$self->sshlogin()};
}

sub add_failed($) {
    # increase the number of times failed for this $sshlogin
    my $self = shift;
    my $sshlogin = shift;
    $self->{'failed'}{$sshlogin}++;
}

sub add_failed_here($) {
    # increase the number of times failed for the current $sshlogin
    my $self = shift;
    $self->{'failed'}{$self->sshlogin()}++;
}

sub reset_failed($) {
    # increase the number of times failed for this $sshlogin
    my $self = shift;
    my $sshlogin = shift;
    delete $self->{'failed'}{$sshlogin};
}

sub reset_failed_here($) {
    # increase the number of times failed for this $sshlogin
    my $self = shift;
    delete $self->{'failed'}{$self->sshlogin()};
}

sub min_failed($) {
    # Returns:
    #   the number of sshlogins this command has failed on
    #   the minimal number of times this command has failed
    my $self = shift;
    my $min_failures =
	::min(map { $self->{'failed'}{$_} } keys %{$self->{'failed'}});
    my $number_of_sshlogins_failed_on = scalar keys %{$self->{'failed'}};
    return ($number_of_sshlogins_failed_on,$min_failures);
}

sub total_failed($) {
    # Returns:
    #   $total_failures = the number of times this command has failed
    my $self = shift;
    my $total_failures = 0;
    for (values %{$self->{'failed'}}) {
	$total_failures += $_;
    }
    return $total_failures;
}

{
    my $script;

    sub postpone_exit_and_cleanup {
	# Command to remove files and dirs (given as args) without
	# affecting the exit value in $?/$status.
	if(not $script) {
	    $script = "perl -e '".
		::spacefree(0,q{
		    $bash=shift;
		    $csh=shift;
		    for(@ARGV){
			unlink;
			rmdir;
		    }
		    if($bash=~s/h//) {
			exit $bash;
		    }
		    exit $csh;
			    }).
			"' ".'"$?h" "$status" ';
	}
	return $script
    }
}

{
    my $script;

    sub fifo_wrap() {
	# Script to create a fifo, run a command on the fifo
	# while copying STDIN to the fifo, and finally
	# remove the fifo and return the exit code of the command.
	if(not $script) {
	    # {} == $PARALLEL_TMP for --fifo
	    # To make it csh compatible a wrapper needs to:
	    # * mkfifo
	    # * spawn $command &
	    # * cat > fifo
	    # * waitpid to get the exit code from $command
	    # * be less than 1000 chars long
	    $script = "perl -e '".
		(::spacefree
		 (0, q{
		     ($s,$c,$f) = @ARGV;
		     # mkfifo $PARALLEL_TMP
		     system "mkfifo", $f;
		     # spawn $shell -c $command &
		     $pid = fork || exec $s, "-c", $c;
		     open($o,">",$f) || die $!;
		     # cat > $PARALLEL_TMP
		     while(sysread(STDIN,$buf,131072)){
			 syswrite $o, $buf;
		     }
		     close $o;
		     # waitpid to get the exit code from $command
		     waitpid $pid,0;
		     # Cleanup
		     unlink $f;
		     exit $?/256;
		  }))."'";
	}
	return $script;
    }
}

sub wrapped($) {
    # Wrap command with:
    # * --shellquote
    # * --nice
    # * --cat
    # * --fifo
    # * --sshlogin
    # * --pipepart (@Global::cat_prepends)
    # * --tee (@Global::cat_prepends)
    # * --pipe
    # * --tmux
    # The ordering of the wrapping is important:
    # * --nice/--cat/--fifo should be done on the remote machine
    # * --pipepart/--pipe should be done on the local machine inside --tmux
    # Uses:
    #   @opt::shellquote
    #   $opt::nice
    #   $Global::shell
    #   $opt::cat
    #   $opt::fifo
    #   @Global::cat_prepends
    #   $opt::pipe
    #   $opt::tmux
    # Returns:
    #   $self->{'wrapped'} = the command wrapped with the above
    my $self = shift;
    if(not defined $self->{'wrapped'}) {
	my $command = $self->replaced();
	# Bug in Bash and Ksh when running multiline aliases
	# This will force them to run correctly, but will fail in
	# tcsh so we do not do it.
	# $command .= "\n\n";
	if(@opt::shellquote) {
	    # Quote one time for each --shellquote
	    my $c = $command;
	    for(@opt::shellquote) {
		$c = ::Q($c);
	    }
	    # Prepend "echo" (it is written in perl because
	    # quoting '-e' causes problem in some versions and
	    # csh's version does something wrong)
	    $command = q(perl -e '$,=" "; print "@ARGV\n";' -- ) . ::Q($c);
	}
	if($Global::parallel_env) {
	    # If $PARALLEL_ENV set, put that in front of the command
	    # Used for env_parallel.*
	    if($Global::shell =~ /zsh/) {
		# The extra 'eval' will make aliases work, too
		$command = $Global::parallel_env."\n".
		    "eval ".::Q($command);
	    } else {
		$command = $Global::parallel_env."\n".$command;
	    }
	}
	if($opt::cat) {
	    # In '--cat' and '--fifo' {} == $PARALLEL_TMP.
	    # This is to make it possible to compute $PARALLEL_TMP on
	    # the fly when running remotely.
	    # $ENV{PARALLEL_TMP} is set in the remote wrapper before
	    # the command is run.
	    #
	    # Prepend 'cat > $PARALLEL_TMP;'
	    # Append 'unlink $PARALLEL_TMP without affecting $?'
	    $command =
		'cat > $PARALLEL_TMP;'.
		$command.";". postpone_exit_and_cleanup().
					 '$PARALLEL_TMP';
	} elsif($opt::fifo) {
	    # Prepend fifo-wrapper. In essence:
	    #   mkfifo {}
	    #   ( $command ) &
	    #   # $command must read {}, otherwise this 'cat' will block
	    #   cat > {};
	    #   wait; rm {}
	    # without affecting $?
	    $command = fifo_wrap(). " ".
		$Global::shell. " ". ::Q($command). ' $PARALLEL_TMP'. ';';
	}
	# Wrap with ssh + tranferring of files
	$command = $self->sshlogin_wrap($command);
	if(@Global::cat_prepends) {
	    # --pipepart: prepend:
	    # < /tmp/foo perl -e 'while(@ARGV) {
	    #   sysseek(STDIN,shift,0) || die; $left = shift;
	    #   while($read = sysread(STDIN,$buf, ($left > 131072 ? 131072 : $left))){
	    #     $left -= $read; syswrite(STDOUT,$buf);
	    #   }
	    # }'  0 0 0 11 |
	    #
	    # --pipepart --tee: prepend:
	    #   < dash-a-file
	    #
	    # --pipe --tee: wrap:
	    #   (rm fifo; ... ) < fifo
	    #
	    # --pipe --shard X:
	    #   (rm fifo; ... ) < fifo
	    $command = (shift @Global::cat_prepends). "($command)".
		(shift @Global::cat_appends);
	} elsif($opt::pipe and not $opt::roundrobin) {
	    # Wrap with EOF-detector to avoid starting $command if EOF.
	    $command = empty_input_wrapper($command);
	}
	if($opt::tmux) {
	    # Wrap command with 'tmux'
	    $command = $self->tmux_wrap($command);
	}
	if($Global::cshell
	   and
	   length $command > 499) {
	    # csh does not like words longer than 1000 (499 quoted)
	    # $command = "perl -e '".base64_zip_eval()."' ".
	    # join" ",string_zip_base64(
	    #         'exec "'.::perl_quote_scalar($command).'"');
	    $command = base64_wrap("exec \"$Global::shell\",'-c',\"".
				   ::perl_quote_scalar($command).'"');
	}
	$self->{'wrapped'} = $command;
    }
    return $self->{'wrapped'};
}

sub set_sshlogin($$) {
    my $self = shift;
    my $sshlogin = shift;
    $self->{'sshlogin'} = $sshlogin;
    delete $self->{'sshlogin_wrap'}; # If sshlogin is changed the wrap is wrong
    delete $self->{'wrapped'};

    if($opt::sqlworker) {
	# Identify worker as --sqlworker often runs on different machines
	my $host = $sshlogin->string();
	if($host eq ":") {
	    $host = ::hostname();
	}
	$Global::sql->update("SET Host = ? WHERE Seq = ".$self->seq(), $host);
    }
}

sub sshlogin($) {
    my $self = shift;
    return $self->{'sshlogin'};
}

sub string_base64($) {
    # Base64 encode strings into 1000 byte blocks.
    # 1000 bytes is the largest word size csh supports
    # Input:
    #   @strings = to be encoded
    # Returns:
    #   @base64 = 1000 byte block
    $Global::use{"MIME::Base64"} ||= eval "use MIME::Base64; 1;";
    my @base64 = unpack("(A1000)*",encode_base64((join"",@_),""));
    return @base64;
}

sub string_zip_base64($) {
    # Pipe string through 'bzip2 -9' and base64 encode it into 1000
    # byte blocks.
    # 1000 bytes is the largest word size csh supports
    # Zipping will make exporting big environments work, too
    # Input:
    #   @strings = to be encoded
    # Returns:
    #   @base64 = 1000 byte block
    my($zipin_fh, $zipout_fh,@base64);
    ::open3($zipin_fh,$zipout_fh,">&STDERR","bzip2 -9");
    if(fork) {
	close $zipin_fh;
	$Global::use{"MIME::Base64"} ||= eval "use MIME::Base64; 1;";
	# Split base64 encoded into 1000 byte blocks
	@base64 = unpack("(A1000)*",encode_base64((join"",<$zipout_fh>),""));
	close $zipout_fh;
    } else {
	close $zipout_fh;
	print $zipin_fh @_;
	close $zipin_fh;
	exit;
    }
    ::debug("base64","Orig:@_\nAs bzip2 base64:@base64\n");
    return @base64;
}

sub base64_zip_eval() {
    # Script that:
    #   * reads base64 strings from @ARGV
    #   * decodes them
    #   * pipes through 'bzip2 -dc'
    #   * evals the result
    # Reverse of string_zip_base64 + eval
    # Will be wrapped in ' so single quote is forbidden
    # Returns:
    #   $script = 1-liner for perl -e
    my $script = ::spacefree(0,q{
        @Parallel = split /_/, "use_IPC::Open3;_use_MIME::Base64";
        eval"@Parallel";
        $chld = $SIG{CHLD};
	$SIG{CHLD} = "IGNORE";
	# Search for bzip2. Not found => use default path
	my $zip = (grep { -x $_ } "/usr/local/bin/bzip2")[0] || "bzip2";
	# $in = stdin on $zip, $out = stdout from $zip
	# Forget my() to save chars for csh
	# my($in, $out,$eval);
	open3($in,$out,">&STDERR",$zip,"-dc");
	if(my $perlpid = fork) {
	    close $in;
	    $eval = join "", <$out>;
	    close $out;
	} else {
	    close $out;
	    # Pipe decoded base64 into 'bzip2 -dc'
	    print $in (decode_base64(join"",@ARGV));
	    close $in;
	    exit;
	}
	wait;
	$SIG{CHLD} = $chld;
	eval $eval;
			     });
    ::debug("base64",$script,"\n");
    return $script;
}

sub base64_wrap($) {
    # base64 encode Perl code
    # Split it into chunks of < 1000 bytes
    # Prepend it with a decoder that eval's it
    # Input:
    #   $eval_string = Perl code to run
    # Returns:
    #   $shell_command = shell command that runs $eval_string
    my $eval_string = shift;
    return
	"perl -e ".
	::Q(base64_zip_eval())." ".
	join" ",::shell_quote(string_zip_base64($eval_string));
}

sub base64_eval($) {
    # Script that:
    #   * reads base64 strings from @ARGV
    #   * decodes them
    #   * evals the result
    # Reverse of string_base64 + eval
    # Will be wrapped in ' so single quote is forbidden.
    # Spaces are stripped so spaces cannot be significant.
    # The funny 'use IPC::Open3'-syntax is to avoid spaces and
    # to make it clear that this is a Parallel command
    # when looking at the process table.
    # Returns:
    #   $script = 1-liner for perl -e
    my $script = ::spacefree(0,q{
        @Parallel=("use","IPC::Open3;","use","MIME::Base64");
        eval "@Parallel";
        my $eval = decode_base64(join"",@ARGV);
	eval $eval;
			     });
    ::debug("base64",$script,"\n");
    return $script;
}

sub sshlogin_wrap($) {
    # Wrap the command with the commands needed to run remotely
    # Input:
    #   $command = command to run
    # Returns:
    #   $self->{'sshlogin_wrap'} = command wrapped with ssh+transfer commands
    sub monitor_parent_sshd_script {
	# This script is to solve the problem of
	# * not mixing STDERR and STDOUT
	# * terminating with ctrl-c
	# If its parent is ssh: all good
	# If its parent is init(1): ssh died, so kill children
	my $monitor_parent_sshd_script;

	if(not $monitor_parent_sshd_script) {
	    $monitor_parent_sshd_script =
		# This will be packed in ', so only use "
		::spacefree(0,'$shell = "'.($ENV{'PARALLEL_SHELL'} || '$ENV{SHELL}').'";'.
			    '$tmpdir = "'.::perl_quote_scalar($ENV{'TMPDIR'}).'";'.
			    '$nice = '.$opt::nice.';'.
			    q{
		# Set $PARALLEL_TMP to a non-existent file name in $TMPDIR
		do {
		    $ENV{PARALLEL_TMP} = $tmpdir."/par".
			join"", map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..5);
		} while(-e $ENV{PARALLEL_TMP});
                $SIG{CHLD} = sub { $done = 1; };
		$pid = fork;
                unless($pid) {
		    # Make own process group to be able to kill HUP it later
		    eval { setpgrp };
		    eval { setpriority(0,0,$nice) };
		    exec $shell, "-c", ($bashfunc."@ARGV");
		    die "exec: $!\n";
		}
		do {
		    # Parent is not init (ppid=1), so sshd is alive
		    # Exponential sleep up to 1 sec
                    $s = $s < 1 ? 0.001 + $s * 1.03 : $s;
                    select(undef, undef, undef, $s);
                } until ($done || getppid == 1);
		# Kill HUP the process group if job not done
		kill(SIGHUP, -${pid}) unless $done;
		wait;
		exit ($?&127 ? 128+($?&127) : 1+$?>>8)
            });
	}
	return $monitor_parent_sshd_script;
    }

    sub vars_to_export {
	# Uses:
	#   @opt::env
	my @vars = ("parallel_bash_environment");
	for my $varstring (@opt::env) {
	    # Split up --env VAR1,VAR2
	    push @vars, split /,/, $varstring;
	}
	for (@vars) {
	    if(-r $_ and not -d) {
		# Read as environment definition bug #44041
		# TODO parse this
		my $fh = ::open_or_exit($_);
		$Global::envdef = join("",<$fh>);
		close $fh;
	    }
	}
	if(grep { /^_$/ } @vars) {
	    local $/ = "\n";
	    # --env _
	    # Include all vars that are not in a clean environment
	    if(open(my $vars_fh, "<", $Global::config_dir . "/ignored_vars")) {
		my @ignore = <$vars_fh>;
		chomp @ignore;
		my %ignore;
		@ignore{@ignore} = @ignore;
		close $vars_fh;
		push @vars, grep { not defined $ignore{$_} } keys %ENV;
		@vars = grep { not /^_$/ } @vars;
	    } else {
		::error("Run '$Global::progname --record-env' ".
			"in a clean environment first.");
		::wait_and_exit(255);
	    }
	}
	# Duplicate vars as BASH functions to include post-shellshock functions (v1+v2)
	# So --env myfunc should look for BASH_FUNC_myfunc() and BASH_FUNC_myfunc%%
	push(@vars, "PARALLEL_PID", "PARALLEL_SEQ", "PARALLEL_SSHLOGIN",
	     map { ("BASH_FUNC_$_()", "BASH_FUNC_$_%%") } @vars);
	# Keep only defined variables
	return grep { defined($ENV{$_}) } @vars;
    }

    sub env_as_eval {
	# Returns:
	#   $eval = '$ENV{"..."}=...; ...'
	my @vars = vars_to_export();
	my $csh_friendly = not grep { /\n/ } @ENV{@vars};
	my @bash_functions = grep { substr($ENV{$_},0,4) eq "() {" } @vars;
	my @non_functions = (grep { !/PARALLEL_ENV/ }
			     grep { substr($ENV{$_},0,4) ne "() {" } @vars);

	# eval of @envset will set %ENV
	my $envset = join"", map {
	    '$ENV{"'.::perl_quote_scalar($_).'"}="'.
		::perl_quote_scalar($ENV{$_}).'";'; } @non_functions;

	# running @bashfunc on the command line, will set the functions
	my @bashfunc = map {
	    my $v=$_;
	    s/BASH_FUNC_(.*)(\(\)|%%)/$1/;
	    "$_$ENV{$v};export -f $_ >/dev/null;" } @bash_functions;
	# eval $bashfuncset will set $bashfunc
	my $bashfuncset;
	if(@bashfunc) {
	    # Functions are not supported for all shells
	    if($Global::shell !~ m:(bash|rbash|zsh|rzsh|dash|ksh):) {
		::warning("Shell functions may not be supported in $Global::shell.");
	    }
	    $bashfuncset =
		'@bash_functions=qw('."@bash_functions".");".
		::spacefree(1,'$shell="'.($ENV{'PARALLEL_SHELL'} || '$ENV{SHELL}').'";'.q{
		    if($shell=~/csh/) {
			print STDERR "CSH/TCSH DO NOT SUPPORT newlines IN VARIABLES/FUNCTIONS. Unset @bash_functions\n";
			exec "false";
		    }
			    }).
				"\n".'$bashfunc = "'.::perl_quote_scalar("@bashfunc").'";';
	} else {
	    $bashfuncset = '$bashfunc = "";'
	}
	if($ENV{'parallel_bash_environment'}) {
	    $bashfuncset .= '$bashfunc .= "eval\ \"\$parallel_bash_environment\"\;";';
	}
	::debug("base64",$envset,$bashfuncset,"\n");
	return $csh_friendly,$envset,$bashfuncset;
    }

    my $self = shift;
    my $command = shift;
    # TODO test that *sh -c 'parallel --env' use *sh
    if(not defined $self->{'sshlogin_wrap'}{$command}) {
	my $sshlogin = $self->sshlogin();
	my $serverlogin = $sshlogin->serverlogin();
	my $quoted_remote_command;
	$ENV{'PARALLEL_SEQ'} = $self->seq();
	$ENV{'PARALLEL_SSHLOGIN'} = $sshlogin->string();
	$ENV{'PARALLEL_PID'} = $$;
	if($serverlogin eq ":") {
	    if($opt::workdir) {
		# Create workdir if needed. Then cd to it.
		my $wd = $self->workdir();
		if($opt::workdir eq "." or $opt::workdir eq "...") {
		    # If $wd does not start with '/': Prepend $HOME
		    $wd =~ s:^([^/]):$ENV{'HOME'}/$1:;
		}
		::mkdir_or_die($wd);
		my $post = "";
		if($opt::workdir eq "...") {
		    $post = ";".exitstatuswrapper("rm -rf ".::Q($wd).";");

		}
		$command = "cd ".::Q($wd)." || exit 255; " .
		    $command . $post;;
	    }
	    if(@opt::env) {
		# Prepend with environment setter, which sets functions in zsh
		my ($csh_friendly,$envset,$bashfuncset) = env_as_eval();
		my $perl_code = $envset.$bashfuncset.
		    '@ARGV="'.::perl_quote_scalar($command).'";'.
		    "exec\"$Global::shell\",\"-c\",\(\$bashfunc.\"\@ARGV\"\)\;die\"exec:\$\!\\n\"\;";
		if(length $perl_code > 999
		   or
		   not $csh_friendly
		   or
		   $command =~ /\n/) {
		    # csh does not deal well with > 1000 chars in one word
		    # csh does not deal well with $ENV with \n
		    $self->{'sshlogin_wrap'}{$command} = base64_wrap($perl_code);
		} else {
		    $self->{'sshlogin_wrap'}{$command} = "perl -e ".::Q($perl_code);
		}
	    } else {
		$self->{'sshlogin_wrap'}{$command} = $command;
	    }
	} else {
	    my $pwd = "";
	    if($opt::workdir) {
		# Create remote workdir if needed. Then cd to it.
	        my $wd = ::pQ($self->workdir());
		$pwd = qq{system("mkdir","-p","--","$wd"); chdir "$wd" ||}.
		    qq{print(STDERR "parallel: Cannot chdir to $wd\\n") && exit 255;};
	    }
	    my ($csh_friendly,$envset,$bashfuncset) = env_as_eval();
	    my $remote_command = $pwd.$envset.$bashfuncset.
		'@ARGV="'.::perl_quote_scalar($command).'";'.
		monitor_parent_sshd_script();
	    $quoted_remote_command = "perl -e ". ::Q($remote_command);
	    my $dq_remote_command = ::Q($quoted_remote_command);
	    if(length $dq_remote_command > 999
	       or
	       not $csh_friendly
	       or
	       $command =~ /\n/) {
		# csh does not deal well with > 1000 chars in one word
		# csh does not deal well with $ENV with \n
		$quoted_remote_command =
		    "perl -e ". ::Q(::Q(base64_zip_eval()))." ".
		    join" ",::shell_quote(::shell_quote(string_zip_base64($remote_command)));
	    } else {
		$quoted_remote_command = $dq_remote_command;
	    }

	    my $sshcmd = $sshlogin->sshcommand();
	    my ($pre,$post,$cleanup)=("","","");
	    # --transfer
	    $pre .= $self->sshtransfer();
	    # --return
	    $post .= $self->sshreturn();
	    # --cleanup
	    $post .= $self->sshcleanup();
	    if($post) {
		# We need to save the exit status of the job
		$post = exitstatuswrapper($post);
	    }
	    $self->{'sshlogin_wrap'}{$command} =
		($pre
		 . "$sshcmd $serverlogin -- exec "
		 . $quoted_remote_command
		 . ";"
		 . $post);
	}
    }
    return $self->{'sshlogin_wrap'}{$command};
}

sub transfer($) {
    # Files to transfer
    # Non-quoted and with {...} substituted
    # Returns:
    #   @transfer - File names of files to transfer
    my $self = shift;

    my $transfersize = 0;
    my @transfer = $self->{'commandline'}->
	replace_placeholders($self->{'commandline'}{'transfer_files'},0,0);
    for(@transfer) {
	# filesize
	if(-e $_) {
	    $transfersize += (stat($_))[7];
	}
    }
    $self->add_transfersize($transfersize);
    return @transfer;
}

sub transfersize($) {
    my $self = shift;
    return $self->{'transfersize'};
}

sub add_transfersize($) {
    my $self = shift;
    my $transfersize = shift;
    $self->{'transfersize'} += $transfersize;
    $opt::sqlworker and
	$Global::sql->update("SET Send = ? WHERE Seq = ".$self->seq(),
			     $self->{'transfersize'});
}

sub sshtransfer($) {
    # Returns for each transfer file:
    #   rsync $file remote:$workdir
    my $self = shift;
    my @pre;
    my $sshlogin = $self->sshlogin();
    my $workdir = $self->workdir();
    for my $file ($self->transfer()) {
	push @pre, $sshlogin->rsync_transfer_cmd($file,$workdir).";";
    }
    return join("",@pre);
}

sub return($) {
    # Files to return
    # Non-quoted and with {...} substituted
    # Returns:
    #   @non_quoted_filenames
    my $self = shift;
    return $self->{'commandline'}->
	replace_placeholders($self->{'commandline'}{'return_files'},0,0);
}

sub returnsize($) {
    # This is called after the job has finished
    # Returns:
    #   $number_of_bytes transferred in return
    my $self = shift;
    for my $file ($self->return()) {
	if(-e $file) {
	    $self->{'returnsize'} += (stat($file))[7];
	}
    }
    return $self->{'returnsize'};
}

sub add_returnsize($) {
    my $self = shift;
    my $returnsize = shift;
    $self->{'returnsize'} += $returnsize;
    $opt::sqlworker and
	$Global::sql->update("SET Receive = ? WHERE Seq = ".$self->seq(),
			     $self->{'returnsize'});
}

sub sshreturn($) {
    # Returns for each return-file:
    #   rsync remote:$workdir/$file .
    my $self = shift;
    my $sshlogin = $self->sshlogin();
    my $sshcmd = $sshlogin->sshcommand();
    my $serverlogin = $sshlogin->serverlogin();
    my $rsync_opts = $ENV{'PARALLEL_RSYNC_OPTS'}. " -e". ::Q($sshcmd);
    my $pre = "";
    for my $file ($self->return()) {
	$file =~ s:^\./::g; # Remove ./ if any
	my $relpath = ($file !~ m:^/:) || ($file =~ m:/\./:); # Is the path relative or /./?
	my $cd = "";
	my $wd = "";
	if($relpath) {
	    #   rsync -avR /foo/./bar/baz.c remote:/tmp/
	    # == (on old systems)
	    #   rsync -avR --rsync-path="cd /foo; rsync" remote:bar/baz.c /tmp/
	    $wd = ::shell_quote_file($self->workdir()."/");
	}
	# Only load File::Basename if actually needed
	$Global::use{"File::Basename"} ||= eval "use File::Basename; 1;";
	# dir/./file means relative to dir, so remove dir on remote
	$file =~ m:(.*)/\./:;
	my $basedir = $1 ? ::shell_quote_file($1."/") : "";
	my $nobasedir = $file;
	$nobasedir =~ s:.*/\./::;
	$cd = ::shell_quote_file(::dirname($nobasedir));
	my $rsync_cd = '--rsync-path='.::Q("cd $wd$cd; rsync");
	my $basename = ::Q(::shell_quote_file(::basename($file)));
	# --return
	#   mkdir -p /home/tange/dir/subdir/;
        #   rsync (--protocol 30) -rlDzR
	#     --rsync-path="cd /home/tange/dir/subdir/; rsync"
        #     server:file.gz /home/tange/dir/subdir/
	$pre .= "mkdir -p $basedir$cd && ". $sshlogin->rsync().
	    " $rsync_cd $rsync_opts $serverlogin:".
	     $basename . " ".$basedir.$cd.";";
    }
    return $pre;
}

sub sshcleanup($) {
    # Return the sshcommand needed to remove the file
    # Returns:
    #   ssh command needed to remove files from sshlogin
    my $self = shift;
    my $sshlogin = $self->sshlogin();
    my $sshcmd = $sshlogin->sshcommand();
    my $serverlogin = $sshlogin->serverlogin();
    my $workdir = $self->workdir();
    my $cleancmd = "";

    for my $file ($self->remote_cleanup()) {
	my @subworkdirs = parentdirs_of($file);
	$cleancmd .= $sshlogin->cleanup_cmd($file,$workdir).";";
    }
    if(defined $opt::workdir and $opt::workdir eq "...") {
       $cleancmd .= "$sshcmd $serverlogin -- rm -rf " . ::Q($workdir).';';
    }
    return $cleancmd;
}

sub remote_cleanup($) {
    # Returns:
    #   Files to remove at cleanup
    my $self = shift;
    if($opt::cleanup) {
	my @transfer = $self->transfer();
	my @return = $self->return();
	return (@transfer,@return);
    } else {
	return ();
    }
}

sub exitstatuswrapper(@) {
    # Input:
    #   @shellcode = shell code to execute
    # Returns:
    #   shell script that returns current status after executing @shellcode
    if($Global::cshell) {
	return ('set _EXIT_status=$status; ' .
		join(" ",@_).
		'exit $_EXIT_status;');
    } else {
	return ('_EXIT_status=$?; ' .
		join(" ",@_).
		'exit $_EXIT_status;');
    }
}

sub workdir($) {
    # Returns:
    #   the workdir on a remote machine
    my $self = shift;
    if(not defined $self->{'workdir'}) {
	my $workdir;
	if(defined $opt::workdir) {
	    if($opt::workdir eq ".") {
		# . means current dir
		my $home = $ENV{'HOME'};
		eval 'use Cwd';
		my $cwd = cwd();
		$workdir = $cwd;
		if($home) {
		    # If homedir exists: remove the homedir from
		    # workdir if cwd starts with homedir
		    # E.g. /home/foo/my/dir => my/dir
		    # E.g. /tmp/my/dir => /tmp/my/dir
		    my ($home_dev, $home_ino) = (stat($home))[0,1];
		    my $parent = "";
		    my @dir_parts = split(m:/:,$cwd);
		    my $part;
		    while(defined ($part = shift @dir_parts)) {
			$part eq "" and next;
			$parent .= "/".$part;
			my ($parent_dev, $parent_ino) = (stat($parent))[0,1];
			if($parent_dev == $home_dev and $parent_ino == $home_ino) {
			    # dev and ino is the same: We found the homedir.
			    $workdir = join("/",@dir_parts);
			    last;
			}
		    }
		}
		if($workdir eq "") {
		    $workdir = ".";
		}
	    } elsif($opt::workdir eq "...") {
		$workdir = ".parallel/tmp/" . ::hostname() . "-" . $$
		    . "-" . $self->seq();
	    } else {
		$workdir = $self->{'commandline'}->
		    replace_placeholders([$opt::workdir],0,0);
		#$workdir = $opt::workdir;
		# Rsync treats /./ special. We dont want that
		$workdir =~ s:/\./:/:g; # Remove /./
		$workdir =~ s:(.)/+$:$1:; # Remove ending / if any
		$workdir =~ s:^\./::g; # Remove starting ./ if any
	    }
	} else {
	    $workdir = ".";
	}
	$self->{'workdir'} = $workdir;
    }
    return $self->{'workdir'};
}

sub parentdirs_of($) {
    # Return:
    #   all parentdirs except . of this dir or file - sorted desc by length
    my $d = shift;
    my @parents = ();
    while($d =~ s:/[^/]+$::) {
	if($d ne ".") {
	    push @parents, $d;
	}
    }
    return @parents;
}

sub start($) {
    # Setup STDOUT and STDERR for a job and start it.
    # Returns:
    #   job-object or undef if job not to run

    sub open3_setpgrp_internal {
	# Run open3+setpgrp followed by the command
	# Input:
	#   $stdin_fh = Filehandle to use as STDIN
	#   $stdout_fh = Filehandle to use as STDOUT
	#   $stderr_fh = Filehandle to use as STDERR
	#   $command = Command to run
	# Returns:
	#   $pid = Process group of job started
	my ($stdin_fh,$stdout_fh,$stderr_fh,$command) = @_;
	my $pid;
	local (*OUT,*ERR);
	open OUT, '>&', $stdout_fh or ::die_bug("Can't dup STDOUT: $!");
	open ERR, '>&', $stderr_fh or ::die_bug("Can't dup STDERR: $!");
	# The eval is needed to catch exception from open3
	eval {
	    if(not $pid = ::open3($stdin_fh, ">&OUT", ">&ERR", "-")) {
		# Each child gets its own process group to make it safe to killall
		eval{ setpgrp(0,0) };
		eval{ setpriority(0,0,$opt::nice) };
		exec($Global::shell,"-c",$command)
		    || ::die_bug("open3-$stdin_fh $command");
	    }
	};
	return $pid;
    }

    sub open3_setpgrp_external {
	# Run open3 on $command wrapped with a perl script doing setpgrp
	# Works on systems that do not support open3(,,,"-")
	# Input:
	#   $stdin_fh = Filehandle to use as STDIN
	#   $stdout_fh = Filehandle to use as STDOUT
	#   $stderr_fh = Filehandle to use as STDERR
	#   $command = Command to run
	# Returns:
	#   $pid = Process group of job started
	my ($stdin_fh,$stdout_fh,$stderr_fh,$command) = @_;
	local (*OUT,*ERR);
	open OUT, '>&', $stdout_fh or ::die_bug("Can't dup STDOUT: $!");
	open ERR, '>&', $stderr_fh or ::die_bug("Can't dup STDERR: $!");

	my $pid;
	my @setpgrp_wrap =
	    ('perl','-e',
	     "eval\{setpgrp\}\;eval\{setpriority\(0,0,$opt::nice\)\}\;".
	     "exec '$Global::shell', '-c', \@ARGV");
	# The eval is needed to catch exception from open3
	eval {
	    $pid = ::open3($stdin_fh, ">&OUT", ">&ERR", @setpgrp_wrap, $command)
		|| ::die_bug("open3-$stdin_fh");
	    1;
	};
	return $pid;
    }

    sub redefine_open3_setpgrp {
	my $setgprp_cache = shift;
	# Select and run open3_setpgrp_internal/open3_setpgrp_external
	no warnings 'redefine';
	my ($outfh,$name) = ::tmpfile(SUFFIX => ".tst");
	# Test to see if open3(x,x,x,"-") is fully supported
	# Can an exported bash function be called via open3?
	my $script = 'if($pid=::open3($i,$o,$e,"-")) { wait; } '.
	    'else { exec("bash","-c","testfun && true"); }';
	my $bash =
	    ::shell_quote_scalar_default(
	    "testfun() { rm $name; }; export -f testfun; ".
	    "perl -MIPC::Open3 -e ".
	    ::shell_quote_scalar_default($script)
	    );
	my $redefine_eval;
	# Redirect STDERR temporarily,
	# so errors on MacOS X are ignored.
	open my $saveerr, ">&STDERR";
	open STDERR, '>', "/dev/null";
	# Run the test
	::debug("init",qq{bash -c $bash 2>/dev/null});
	qx{ bash -c $bash 2>/dev/null };
	open STDERR, ">&", $saveerr;

	if(-e $name) {
	    # Does not support open3(x,x,x,"-")
	    # or does not have bash:
	    # Use (slow) external version
	    unlink($name);
	    $redefine_eval = '*open3_setpgrp = \&open3_setpgrp_external';
	    ::debug("init","open3_setpgrp_external chosen\n");
	} else {
	    # Supports open3(x,x,x,"-")
	    # This is 0.5 ms faster to run
	    $redefine_eval = '*open3_setpgrp = \&open3_setpgrp_internal';
	    ::debug("init","open3_setpgrp_internal chosen\n");
	}
	if(open(my $fh, ">", $setgprp_cache)) {
	    print $fh $redefine_eval;
	    close $fh;
	} else {
	    ::debug("init","Cannot write to $setgprp_cache");
	}
	eval $redefine_eval;
    }

    sub open3_setpgrp {
	my $setgprp_cache = $Global::cache_dir . "/tmp/sshlogin/" .
	    ::hostname() . "/setpgrp_func";
	if(-e $setgprp_cache) {
	    local $/ = undef;
	    open(my $fh, "<", $setgprp_cache) || die;
	    eval <$fh> || die;
	    close $fh;
	} else {
	    redefine_open3_setpgrp($setgprp_cache);
	}
	# The sub is now redefined. Call it
	return open3_setpgrp(@_);
    }

    my $job = shift;
    # Get the shell command to be executed (possibly with ssh infront).
    my $command = $job->wrapped();
    my $pid;

    if($Global::interactive or $Global::stderr_verbose) {
	$job->interactive_start();
    }
    # Must be run after $job->interactive_start():
    # $job->interactive_start() may call $job->skip()
    if($job->{'commandline'}{'skip'}) {
	# $job->skip() was called
	$command = "true";
    }
    $job->openoutputfiles();
    $job->print_verbose_dryrun();
    # Call slot to store the slot value
    $job->slot();
    my($stdout_fh,$stderr_fh) = ($job->fh(1,"w"),$job->fh(2,"w"));
    if($opt::dryrun or $opt::sqlmaster) { $command = "true"; }
    $ENV{'PARALLEL_SEQ'} = $job->seq();
    $ENV{'PARALLEL_PID'} = $$;
    $ENV{'PARALLEL_TMP'} = ::tmpname("par");
    $job->add_rm($ENV{'PARALLEL_TMP'});
    ::debug("run", $Global::total_running, " processes . Starting (",
	    $job->seq(), "): $command\n");
    if($opt::pipe) {
	my ($stdin_fh) = ::gensym();
	$pid = open3_setpgrp($stdin_fh,$stdout_fh,$stderr_fh,$command);
	if($opt::roundrobin and not $opt::keeporder) {
	    # --keep-order will make sure the order will be reproducible
	    ::set_fh_non_blocking($stdin_fh);
	}
	$job->set_fh(0,"w",$stdin_fh);
	if($opt::tee or $opt::shard or $opt::bin) { $job->set_virgin(0); }
    } elsif ($opt::tty and -c "/dev/tty" and
	     open(my $devtty_fh, "<", "/dev/tty")) {
	# Give /dev/tty to the command if no one else is using it
	# The eval is needed to catch exception from open3
	local (*IN,*OUT,*ERR);
	open OUT, '>&', $stdout_fh or ::die_bug("Can't dup STDOUT: $!");
	open ERR, '>&', $stderr_fh or ::die_bug("Can't dup STDERR: $!");
	*IN = $devtty_fh;
	# The eval is needed to catch exception from open3
	my @wrap = ('perl','-e',
			    "eval\{setpriority\(0,0,$opt::nice\)\}\;".
			    "exec '$Global::shell', '-c', \@ARGV");
	eval {
	    $pid = ::open3("<&IN", ">&OUT", ">&ERR", @wrap, $command)
		|| ::die_bug("open3-/dev/tty");
	    1;
	};
	close $devtty_fh;
	$job->set_virgin(0);
    } else {
	$pid = open3_setpgrp(::gensym(),$stdout_fh,$stderr_fh,$command);
	$job->set_virgin(0);
    }
    if($pid) {
	# A job was started
	$Global::total_running++;
	$Global::total_started++;
	$job->set_pid($pid);
	$job->set_starttime();
	$Global::running{$job->pid()} = $job;
	if($opt::timeout) {
	    $Global::timeoutq->insert($job);
	}
	$Global::newest_job = $job;
	$Global::newest_starttime = ::now();
	return $job;
    } else {
	# No more processes
	::debug("run", "Cannot spawn more jobs.\n");
	return undef;
    }
}

sub interactive_start($) {
    my $self = shift;
    my $command = $self->wrapped();
    if($Global::interactive) {
	my $answer;
	::status_no_nl("$command ?...");
	do{
	    open(my $tty_fh, "<", "/dev/tty") || ::die_bug("interactive-tty");
	    $answer = <$tty_fh>;
	    close $tty_fh;
	    # Sometime we get an empty string (not even \n)
	    # Do not know why, so let us just ignore it and try again
	} while(length $answer < 1);
	if (not ($answer =~ /^\s*y/i)) {
	    $self->{'commandline'}->skip();
	}
    } else {
	print $Global::original_stderr "$command\n";
    }
}

{
    my $tmuxsocket;

    sub tmux_wrap($) {
	# Wrap command with tmux for session pPID
	# Input:
	#   $actual_command = the actual command being run (incl ssh wrap)
	my $self = shift;
	my $actual_command = shift;
	# Temporary file name. Used for fifo to communicate exit val
	my $tmpfifo = ::tmpname("tmx");
	$self->add_rm($tmpfifo);

	if(length($tmpfifo) >=100) {
	    ::error("tmux does not support sockets with path > 100.");
	    ::wait_and_exit(255);
	}
	if($opt::tmuxpane) {
	    # Move the command into a pane in window 0
	    $actual_command = $ENV{'PARALLEL_TMUX'}.' joinp -t :0 ; '.
		$ENV{'PARALLEL_TMUX'}.' select-layout -t :0 tiled ; '.
		$actual_command;
	}
	my $visual_command = $self->replaced();
	my $title = $visual_command;
	if($visual_command =~ /\0/) {
	    ::error("Command line contains NUL. tmux is confused by NUL.");
	    ::wait_and_exit(255);
	}
	# ; causes problems
	# ascii 194-245 annoys tmux
	$title =~ tr/[\011-\016;\302-\365]/ /s;
	$title = ::Q($title);

	my $l_act = length($actual_command);
	my $l_tit = length($title);
	my $l_fifo = length($tmpfifo);
	# The line to run contains a 118 chars extra code + the title 2x
	my $l_tot = 2 * $l_tit + $l_act + $l_fifo;

	my $quoted_space75 = ::Q(" ")x75;
	while($l_tit < 1000 and
	      (
	       (890 < $l_tot and $l_tot < 1350)
	       or
	       (9250 < $l_tot and $l_tot < 9800)
	      )) {
	    # tmux blocks for certain lengths:
	    # 900 < title + command < 1200
	    # 9250 < title + command < 9800
	    # but only if title < 1000, so expand the title with 75 spaces
	    # The measured lengths are:
	    # 996 < (title + whole command) < 1127
	    # 9331 < (title + whole command) < 9636
	    $title .= $quoted_space75;
	    $l_tit = length($title);
	    $l_tot = 2 * $l_tit + $l_act + $l_fifo;
	}

	my $tmux;
	$ENV{'PARALLEL_TMUX'} ||= "tmux";
	if(not $tmuxsocket) {
	    $tmuxsocket = ::tmpname("tms");
	    if($opt::fg) {
		if(not fork) {
		    # Run tmux in the foreground
		    # Wait for the socket to appear
		    while (not -e $tmuxsocket) { }
		    `$ENV{'PARALLEL_TMUX'} -S $tmuxsocket attach`;
		    exit;
		}
	    }
	    ::status("See output with: $ENV{'PARALLEL_TMUX'} -S $tmuxsocket attach");
	}
	$tmux = "sh -c '".
	    $ENV{'PARALLEL_TMUX'}." -S $tmuxsocket new-session -s p$$ -d \"sleep .2\" >/dev/null 2>&1';" .
	    $ENV{'PARALLEL_TMUX'}." -S $tmuxsocket new-window -t p$$ -n $title";

	::debug("tmux", "title len:", $l_tit, " act ", $l_act, " max ",
		$Limits::Command::line_max_len, " tot ",
		$l_tot, "\n");

	return "mkfifo $tmpfifo && $tmux ".
	    # Run in tmux
	    ::Q
	    (
	     "(".$actual_command.');'.
	     # The triple print is needed - otherwise the testsuite fails
	     q[ perl -e 'while($t++<3){ print $ARGV[0],"\n" }' $?h/$status >> ].$tmpfifo."&".
	     "echo $title; echo \007Job finished at: `date`;sleep 10"
	    ).
	    # Run outside tmux
	    # Read a / separated line: 0h/2 for csh, 2/0 for bash.
	    # If csh the first will be 0h, so use the second as exit value.
	    # Otherwise just use the first value as exit value.
	    q{; exec perl -e '$/="/";$_=<>;$c=<>;unlink $ARGV; /(\d+)h/ and exit($1);exit$c' }.$tmpfifo;
    }
}

sub is_already_in_results($) {
    # Do we already have results for this job?
    # Returns:
    #   $job_already_run = bool whether there is output for this or not
    my $job = $_[0];
    my $out = $job->{'commandline'}->results_out();
    ::debug("run", "Test ${out}stdout", -e "${out}stdout", "\n");
    return(-e $out."stdout" or -f $out);
}

sub is_already_in_joblog($) {
    my $job = shift;
    return vec($Global::job_already_run,$job->seq(),1);
}

sub set_job_in_joblog($) {
    my $job = shift;
    vec($Global::job_already_run,$job->seq(),1) = 1;
}

sub should_be_retried($) {
    # Should this job be retried?
    # Returns
    #   0 - do not retry
    #   1 - job queued for retry
    my $self = shift;
    if (not $opt::retries) {
	return 0;
    }
    if(not $self->exitstatus() and not $self->exitsignal()) {
	# Completed with success. If there is a recorded failure: forget it
	$self->reset_failed_here();
	return 0;
    } else {
	# The job failed. Should it be retried?
	$self->add_failed_here();
	my $retries = $self->{'commandline'}->
	    replace_placeholders([$opt::retries],0,0);
	if($self->total_failed() == $retries) {
	    # This has been retried enough
	    return 0;
	} else {
	    # This command should be retried
	    $self->set_endtime(undef);
	    $self->reset_exitstatus();
	    $Global::JobQueue->unget($self);
	    ::debug("run", "Retry ", $self->seq(), "\n");
	    return 1;
	}
    }
}

{
    my (%print_later,$job_seq_to_print);

    sub print_earlier_jobs($) {
	# Print jobs whose output is postponed due to --keep-order
	# Returns: N/A
	my $job = shift;
	$print_later{$job->seq()} = $job;
	$job_seq_to_print ||= 1;
	my $returnsize = 0;
	::debug("run", "Looking for: $job_seq_to_print ",
		"This: ", $job->seq(), "\n");
	for(;vec($Global::job_already_run,$job_seq_to_print,1);
	    $job_seq_to_print++) {}
	while(my $j = $print_later{$job_seq_to_print}) {
	    $returnsize += $j->print();
	    if($j->endtime()) {
		# Job finished - look at the next
		delete $print_later{$job_seq_to_print};
		$job_seq_to_print++;
		next;
	    } else {
		# Job not finished yet - look at it again next round
		last;
	    }
	}
	return $returnsize;
    }
}

sub print($) {
    # Print the output of the jobs
    # Returns: N/A
    my $self = shift;

    ::debug("print", ">>joboutput ", $self->replaced(), "\n");
    if($opt::dryrun) {
	# Nothing was printed to this job:
	# cleanup tmp files if --files was set
	::rm($self->fh(1,"name"));
    }
    if($opt::pipe and $self->virgin() and not $opt::tee) {
	# Skip --joblog, --dryrun, --verbose
    } else {
	if($opt::ungroup) {
	    # NULL returnsize = 0 returnsize
	    $self->returnsize() or $self->add_returnsize(0);
	    if($Global::joblog and defined $self->{'exitstatus'}) {
		# Add to joblog when finished
		$self->print_joblog();
		# Printing is only relevant for grouped/--line-buffer output.
		$opt::ungroup and return;
	    }
	}

	# Check for disk full
	::exit_if_disk_full();
    }

    my $returnsize = $self->returnsize();
    for my $fdno (sort { $a <=> $b } keys %Global::fd) {
	# Sort by file descriptor numerically: 1,2,3,..,9,10,11
	$fdno == 0 and next;
	my $out_fd = $Global::fd{$fdno};
	my $in_fh = $self->fh($fdno,"r");
	if(not $in_fh) {
	    if(not $Job::file_descriptor_warning_printed{$fdno}++) {
		# ::warning("File descriptor $fdno not defined\n");
	    }
	    next;
	}
	::debug("print", "File descriptor $fdno (", $self->fh($fdno,"name"), "):\n");
	if($opt::linebuffer) {
	    # Line buffered print out
	    $self->print_linebuffer($fdno,$in_fh,$out_fd);
	} elsif($opt::files) {
	    $self->print_files($fdno,$in_fh,$out_fd);
	} elsif($opt::tag or defined $opt::tagstring) {
	    $self->print_tag($fdno,$in_fh,$out_fd);
	} else {
	    $self->print_normal($fdno,$in_fh,$out_fd);
	}
	flush $out_fd;
    }
    ::debug("print", "<<joboutput\n");
    if(defined $self->{'exitstatus'}
       and not ($self->virgin() and $opt::pipe)) {
	if($Global::joblog and not $opt::sqlworker) {
	    # Add to joblog when finished
	    $self->print_joblog();
	}
	if($opt::sqlworker and not $opt::results) {
	    $Global::sql->output($self);
	}
	if($Global::csvsep) {
	    # Add output to CSV when finished
	    $self->print_csv();
	}
    }
    return $returnsize - $self->returnsize();
}

{
    my $header_printed;

    sub print_csv($) {
	my $self = shift;
	my $cmd;
	if($Global::verbose <= 1) {
	    $cmd = $self->replaced();
	} else {
	    # Verbose level > 1: Print the rsync and stuff
	    $cmd = join " ", @{$self->{'commandline'}};
	}
	my $record_ref = $self->{'commandline'}{'arg_list_flat_orig'};

	if(not $header_printed) {
	    # Variable headers
	    # Normal => V1..Vn
	    # --header : => first value from column
	    my @V;
	    if($opt::header) {
		my $i = 1;
		@V = (map { $Global::input_source_header{$i++} }
		      @$record_ref[1..$#$record_ref]);
	    } else {
		my $V = "V1";
		@V = (map { $V++ } @$record_ref[1..$#$record_ref]);
	    }
	    print $Global::csv_fh
		(map { $$_ }
		 combine_ref("Seq", "Host", "Starttime", "JobRuntime",
			     "Send", "Receive", "Exitval", "Signal", "Command",
			     @V,
			     "Stdout","Stderr"
		 )),"\n";
	    $header_printed++;
	}
	# Memory optimization: Overwrite with the joined output
	$self->{'output'}{1} = join("", @{$self->{'output'}{1}});
	$self->{'output'}{2} = join("", @{$self->{'output'}{2}});
	print $Global::csv_fh
	    (map { $$_ }
	     combine_ref
	     ($self->seq(),
	      $self->sshlogin()->string(),
	      $self->starttime(), sprintf("%0.3f",$self->runtime()),
	      $self->transfersize(), $self->returnsize(),
	      $self->exitstatus(), $self->exitsignal(), \$cmd,
	      \@$record_ref[1..$#$record_ref],
	      \$self->{'output'}{1},
	      \$self->{'output'}{2})),"\n";
    }
}

sub combine_ref($) {
    # Inspired by Text::CSV_PP::_combine (by Makamaka Hannyaharamitu)
    my @part = @_;
    my $sep = $Global::csvsep;
    my $quot = '"';
    my @out = ();

    my $must_be_quoted;
    for my $column (@part) {
	# Memory optimization: Content transferred as reference
	if(ref $column ne "SCALAR") {
	    # Convert all columns to scalar references
	    my $v = $column;
	    $column = \$v;
	}
        if(not defined $$column) {
            $$column = '';
            next;
        }

        $must_be_quoted = 0;

        if($$column =~ s/$quot/$quot$quot/go){
	    # Replace " => ""
            $must_be_quoted ||=1;
        }
        if($$column =~ /[\s\Q$sep\E]/o){
	    # Put quotes around if the column contains ,
            $must_be_quoted ||=1;
        }

	$Global::use{"bytes"} ||= eval "use bytes; 1;";
	if ($$column =~ /\0/) {
	    # Contains \0 => put quotes around
	    $must_be_quoted ||=1;
        }
        if($must_be_quoted){
	    push @out, \$sep, \$quot, $column, \$quot;
        } else {
	    push @out, \$sep, $column;
	}
    }
    # Pop off a $sep
    shift @out;
    return @out;
}

sub print_files($) {
    # Print the name of the file containing stdout on stdout
    # Uses:
    #   $opt::pipe
    #   $opt::group = Print when job is done
    #   $opt::linebuffer = Print ASAP
    # Returns: N/A
    my $self = shift;
    my ($fdno,$in_fh,$out_fd) = @_;

    # If the job is dead: close printing fh. Needed for --compress
    close $self->fh($fdno,"w");
    if($? and $opt::compress) {
	::error($opt::compress_program." failed.");
	$self->set_exitstatus(255);
    }
    if($opt::compress) {
	# Kill the decompressor which will not be needed
	CORE::kill "TERM", $self->fh($fdno,"rpid");
    }
    close $in_fh;

    if($opt::pipe and $self->virgin()) {
	# Nothing was printed to this job:
	# cleanup unused tmp files because --files was set
	for my $fdno (1,2) {
	    ::rm($self->fh($fdno,"name"));
	    ::rm($self->fh($fdno,"unlink"));
	}
    } elsif($fdno == 1 and $self->fh($fdno,"name")) {
	print $out_fd $self->tag(),$self->fh($fdno,"name"),"\n";
	if($Global::membuffer) {
	    push @{$self->{'output'}{$fdno}},
		$self->tag(), $self->fh($fdno,"name");
	}
	$self->add_returnsize(-s $self->fh($fdno,"name"));
	# Mark as printed - do not print again
	$self->set_fh($fdno,"name",undef);
    }
}

sub print_linebuffer($) {
    my $self = shift;
    my ($fdno,$in_fh,$out_fd) = @_;
    if(defined $self->{'exitstatus'}) {
	# If the job is dead: close printing fh. Needed for --compress
	close $self->fh($fdno,"w");
	if($? and $opt::compress) {
	    ::error($opt::compress_program." failed.");
	    $self->set_exitstatus(255);
	}
	if($opt::compress) {
	    # Blocked reading in final round
	    for my $fdno (1,2) {
		::set_fh_blocking($self->fh($fdno,'r'));
	    }
	}
    }
    if(not $self->virgin()) {
	if($opt::files or ($opt::results and not $Global::csvsep)) {
	    # Print filename
	    if($fdno == 1 and not $self->fh($fdno,"printed")) {
		print $out_fd $self->tag(),$self->fh($fdno,"name"),"\n";
		if($Global::membuffer) {
		    push(@{$self->{'output'}{$fdno}}, $self->tag(),
			 $self->fh($fdno,"name"));
		}
		$self->set_fh($fdno,"printed",1);
	    }
	    # No need for reading $in_fh, as it is from "cat >/dev/null"
	} else {
	    # Read halflines and print full lines
	    my $outputlength = 0;
	    my $halfline_ref = $self->{'halfline'}{$fdno};
	    my ($buf,$i,$rv);
	    # 1310720 gives 1.2 GB/s
	    # 131072  gives 0.9 GB/s
	    while($rv = sysread($in_fh, $buf,1310720)) {
		$outputlength += $rv;
		# TODO --recend
		# Treat both \n and \r as line end
		$i = ::max((rindex($buf,"\n")+1), (rindex($buf,"\r")+1));
		if($i) {
		    # One or more complete lines were found
		    if($opt::tag or defined $opt::tagstring) {
			# Replace ^ with $tag within the full line
			if($Global::cache_replacement_eval) {
			    # Replace with the same value for tag
			    my $tag = $self->tag();
			    unshift @$halfline_ref, $tag;
			    # TODO --recend that can be partially in @$halfline_ref
			    substr($buf,0,$i-1) =~ s/(?<=[\n\r])(?=.|$)/$tag/gs;
			    # The length changed, so find the new ending pos
			    $i = ::max((rindex($buf,"\n")+1), (rindex($buf,"\r")+1));
			} else {
			    # Replace with freshly computed value of tag
			    unshift @$halfline_ref, $self->tag();
			    substr($buf,0,$i-1) =~ s/(?<=[\n\r])(?=.|$)/$self->tag()/gse;
			    # The length changed, so find the new ending pos
			    $i = ::max((rindex($buf,"\n")+1), (rindex($buf,"\r")+1));
			}
		    }
		    # Print the partial line (halfline) and the last half
		    print $out_fd @$halfline_ref, substr($buf,0,$i);
		    # Buffer in memory for SQL and CSV-output
		    if($Global::membuffer) {
			push(@{$self->{'output'}{$fdno}},
			     @$halfline_ref, substr($buf,0,$i));
		    }
		    # Remove the printed part by keeping the unprinted part
		    @$halfline_ref = (substr($buf,$i));
		} else {
		    # No newline, so append to the halfline
		    push @$halfline_ref, $buf;
		}
	    }
	    $self->add_returnsize($outputlength);
	}
	if(defined $self->{'exitstatus'}) {
	    if($opt::files or ($opt::results and not $Global::csvsep)) {
		$self->add_returnsize(-s $self->fh($fdno,"name"));
	    } else {
		# If the job is dead: print the remaining partial line
		# read remaining
		my $halfline_ref = $self->{'halfline'}{$fdno};
		if(grep /./, @$halfline_ref) {
		    my $returnsize = 0;
		    for(@{$self->{'halfline'}{$fdno}}) {
			$returnsize += length $_;
		    }
		    $self->add_returnsize($returnsize);
		    if($opt::tag or defined $opt::tagstring) {
			# Prepend $tag the the remaining half line
			unshift @$halfline_ref, $self->tag();
		    }
		    # Print the partial line (halfline)
		    print $out_fd @{$self->{'halfline'}{$fdno}};
		    # Buffer in memory for SQL and CSV-output
		    if($Global::membuffer) {
			push(@{$self->{'output'}{$fdno}}, @$halfline_ref);
		    }
		    @$halfline_ref = ();
		}
	    }
	    if($self->fh($fdno,"rpid") and
	       CORE::kill 0, $self->fh($fdno,"rpid")) {
		# decompress still running
	    } else {
		# decompress done: close fh
		close $in_fh;
		if($? and $opt::compress) {
		    ::error($opt::decompress_program." failed.");
		    $self->set_exitstatus(255);
		}
	    }
	}
    }
}

sub print_tag(@) {
    return print_normal(@_);
}

sub free_ressources() {
    my $self = shift;
    if(not $opt::ungroup) {
	for my $fdno (sort { $a <=> $b } keys %Global::fd) {
	    close $self->fh($fdno,"w");
	    close $self->fh($fdno,"r");
	}
    }
}

sub print_normal($) {
    my $self = shift;
    my ($fdno,$in_fh,$out_fd) = @_;
    my $buf;
    close $self->fh($fdno,"w");
    if($? and $opt::compress) {
	::error($opt::compress_program." failed.");
	$self->set_exitstatus(255);
    }
    if(not $self->virgin()) {
	seek $in_fh, 0, 0;
	# $in_fh is now ready for reading at position 0
	my $outputlength = 0;
	my @output;

	if($opt::tag or $opt::tagstring) {
	    # Read line by line
	    local $/ = "\n";
	    my $tag = $self->tag();
	    while(<$in_fh>) {
		$outputlength += length $_;
		# Tag lines with \r, too
		$_ =~ s/(?<=[\r])(?=.|$)/$tag/gs;
		print $out_fd $tag,$_;
		if($Global::membuffer) {
		    push @{$self->{'output'}{$fdno}}, $tag, $_;
		}
	    }
	} else {
	    while(sysread($in_fh,$buf,131072)) {
		print $out_fd $buf;
		$outputlength += length $buf;
		if($Global::membuffer) {
		    push @{$self->{'output'}{$fdno}}, $buf;
		}
	    }
	}
	if($fdno == 1) {
	    $self->add_returnsize($outputlength);
	}
	close $in_fh;
	if($? and $opt::compress) {
	    ::error($opt::decompress_program." failed.");
	    $self->set_exitstatus(255);
	}
    }
}

sub print_joblog($) {
    my $self = shift;
    my $cmd;
    if($Global::verbose <= 1) {
	$cmd = $self->replaced();
    } else {
	# Verbose level > 1: Print the rsync and stuff
	$cmd = join " ", @{$self->{'commandline'}};
    }
    # Newlines make it hard to parse the joblog
    $cmd =~ s/\n/\0/g;
    print $Global::joblog
	join("\t", $self->seq(), $self->sshlogin()->string(),
	     $self->starttime(), sprintf("%10.3f",$self->runtime()),
	     $self->transfersize(), $self->returnsize(),
	     $self->exitstatus(), $self->exitsignal(), $cmd
	). "\n";
    flush $Global::joblog;
    $self->set_job_in_joblog();
}

sub tag($) {
    my $self = shift;
    if(not defined $self->{'tag'} or not $Global::cache_replacement_eval) {
	if($opt::tag or defined $opt::tagstring) {
	    $self->{'tag'} = $self->{'commandline'}->
		replace_placeholders([$opt::tagstring],0,0)."\t";
	} else {
	    $self->{'tag'} = "";
	}
    }
    return $self->{'tag'};
}

sub hostgroups($) {
    my $self = shift;
    if(not defined $self->{'hostgroups'}) {
	$self->{'hostgroups'} =
	    $self->{'commandline'}->{'arg_list'}[0][0]->{'hostgroups'};
    }
    return @{$self->{'hostgroups'}};
}

sub exitstatus($) {
    my $self = shift;
    return $self->{'exitstatus'};
}

sub set_exitstatus($$) {
    my $self = shift;
    my $exitstatus = shift;
    if($exitstatus) {
	# Overwrite status if non-zero
	$self->{'exitstatus'} = $exitstatus;
    } else {
	# Set status but do not overwrite
	# Status may have been set by --timeout
	$self->{'exitstatus'} ||= $exitstatus;
    }
    $opt::sqlworker and
	$Global::sql->update("SET Exitval = ? WHERE Seq = ".$self->seq(),
			     $exitstatus);
}

sub reset_exitstatus($) {
    my $self = shift;
    undef $self->{'exitstatus'};
}

sub exitsignal($) {
    my $self = shift;
    return $self->{'exitsignal'};
}

sub set_exitsignal($$) {
    my $self = shift;
    my $exitsignal = shift;
    $self->{'exitsignal'} = $exitsignal;
    $opt::sqlworker and
	$Global::sql->update("SET _Signal = ? WHERE Seq = ".$self->seq(),
			     $exitsignal);
}

{
    my $status_printed;
    my $total_jobs;

    sub should_we_halt {
	# Should we halt? Immediately? Gracefully?
	# Returns: N/A
	my $job = shift;
	my $limit;
	if($job->exitstatus() or $job->exitsignal()) {
	    # Job failed
	    $Global::exitstatus++;
	    $Global::total_failed++;
	    if($Global::halt_fail) {
		::status("$Global::progname: This job failed:",
			 $job->replaced());
		$limit = $Global::total_failed;
	    }
	} elsif($Global::halt_success) {
	    ::status("$Global::progname: This job succeeded:",
		     $job->replaced());
	    $limit = $Global::total_completed - $Global::total_failed;
	}
	if($Global::halt_done) {
	    ::status("$Global::progname: This job finished:",
		     $job->replaced());
	    $limit = $Global::total_completed;
	}
	if(not defined $limit) {
	    return ""
	}
	#  --halt # => 1..100 (number of jobs failed, 101 means > 100)
	#  --halt % => 1..100 (pct of jobs failed)
	if($Global::halt_pct and not $Global::halt_count) {
	    $total_jobs ||= $Global::JobQueue->total_jobs();
	    # From the pct compute the number of jobs that must fail/succeed
	    $Global::halt_count = $total_jobs * $Global::halt_pct;
	}
	if($limit >= $Global::halt_count) {
	    # At least N jobs have failed/succeded/completed
	    # or at least N% have failed/succeded/completed
	    # So we should prepare for exit
	    if($Global::halt_fail or $Global::halt_done) {
		# Set exit status
		if(not defined $Global::halt_exitstatus) {
		    if($Global::halt_pct) {
			# --halt now,fail=X% or soon,fail=X%
			# --halt now,done=X% or soon,done=X%
			$Global::halt_exitstatus =
			    ::ceil($Global::total_failed / $total_jobs * 100);
		    } elsif($Global::halt_count) {
			# --halt now,fail=X or soon,fail=X
			# --halt now,done=X or soon,done=X
			$Global::halt_exitstatus =
			    ::min($Global::total_failed,101);
		    }
		    if($Global::halt_count and $Global::halt_count == 1) {
			# --halt now,fail=1 or soon,fail=1
			# --halt now,done=1 or soon,done=1
			# Emulate Bash's +128 if there is a signal
			$Global::halt_exitstatus =
			    ($job->exitstatus()
			     or
			     $job->exitsignal() ? $job->exitsignal() + 128 : 0);
		    }
		}
		::debug("halt","Pct: ",$Global::halt_pct,
			" count: ",$Global::halt_count,
			" status: ",$Global::halt_exitstatus,"\n");
	    } elsif($Global::halt_success) {
		$Global::halt_exitstatus = 0;
	    }
	    if($Global::halt_when eq "soon"
	       and
	       (scalar(keys %Global::running) > 0
		or
		$Global::max_jobs_running == 1)) {
		::status
		    ("$Global::progname: Starting no more jobs. ".
		     "Waiting for ". (keys %Global::running).
		     " jobs to finish.");
		$Global::start_no_new_jobs ||= 1;
	    }
	    return($Global::halt_when);
	}
	return "";
    }
}


package CommandLine;

sub new($) {
    my $class = shift;
    my $seq = shift;
    my $commandref = shift;
    $commandref || die;
    my $arg_queue = shift;
    my $context_replace = shift;
    my $max_number_of_args = shift; # for -N and normal (-n1)
    my $transfer_files = shift;
    my $return_files = shift;
    my $replacecount_ref = shift;
    my $len_ref = shift;
    my %replacecount = %$replacecount_ref;
    my %len = %$len_ref;
    for (keys %$replacecount_ref) {
	# Total length of this replacement string {} replaced with all args
	$len{$_} = 0;
    }
    return bless {
	'command' => $commandref,
	'seq' => $seq,
	'len' => \%len,
	'arg_list' => [],
	'arg_list_flat' => [],
	'arg_list_flat_orig' => [undef],
	'arg_queue' => $arg_queue,
	'max_number_of_args' => $max_number_of_args,
	'replacecount' => \%replacecount,
	'context_replace' => $context_replace,
	'transfer_files' => $transfer_files,
	'return_files' => $return_files,
	'replaced' => undef,
    }, ref($class) || $class;
}

sub seq($) {
    my $self = shift;
    return $self->{'seq'};
}

sub set_seq($$) {
    my $self = shift;
    $self->{'seq'} = shift;
}

sub slot($) {
    # Find the number of a free job slot and return it
    # Uses:
    #   @Global::slots - list with free jobslots
    # Returns:
    #   $jobslot = number of jobslot
    my $self = shift;
    if(not $self->{'slot'}) {
	if(not @Global::slots) {
	    # $max_slot_number will typically be $Global::max_jobs_running
	    push @Global::slots, ++$Global::max_slot_number;
	}
	$self->{'slot'} = shift @Global::slots;
    }
    return $self->{'slot'};
}

{
    my $already_spread;

    sub populate($) {
	# Add arguments from arg_queue until the number of arguments or
	# max line length is reached
	# Uses:
	#   $Global::minimal_command_line_length
	#   $opt::cat
	#   $opt::fifo
	#   $Global::JobQueue
	#   $opt::m
	#   $opt::X
	#   $Global::max_jobs_running
	# Returns: N/A
	my $self = shift;
	my $next_arg;
	my $max_len = $Global::minimal_command_line_length
	    || Limits::Command::max_length();

	if($opt::cat or $opt::fifo) {
	    # Get the empty arg added by --pipepart (if any)
	    $Global::JobQueue->{'commandlinequeue'}->{'arg_queue'}->get();
	    # $PARALLEL_TMP will point to a tempfile that will be used as {}
	    $Global::JobQueue->{'commandlinequeue'}->{'arg_queue'}->
		unget([Arg->new('$PARALLEL_TMP')]);
	}
	while (not $self->{'arg_queue'}->empty()) {
	    $next_arg = $self->{'arg_queue'}->get();
	    if(not defined $next_arg) {
		next;
	    }
	    $self->push($next_arg);
	    if($self->len() >= $max_len) {
		# Command length is now > max_length
		# If there are arguments: remove the last
		# If there are no arguments: Error
		# TODO stuff about -x opt_x
		if($self->number_of_args() > 1) {
		    # There is something to work on
		    $self->{'arg_queue'}->unget($self->pop());
		    last;
		} else {
		    my $args = join(" ", map { $_->orig() } @$next_arg);
		    ::error("Command line too long (".
			    $self->len(). " >= ".
			    $max_len.
			    ") at input ".
			    $self->{'arg_queue'}->arg_number().
			    ": ".
			    ((length $args > 50) ?
			     (substr($args,0,50))."..." :
			     $args));
		    $self->{'arg_queue'}->unget($self->pop());
		    ::wait_and_exit(255);
		}
	    }

	    if(defined $self->{'max_number_of_args'}) {
		if($self->number_of_args() >= $self->{'max_number_of_args'}) {
		    last;
		}
	    }
	}
	if(($opt::m or $opt::X) and not $already_spread
	   and $self->{'arg_queue'}->empty() and $Global::max_jobs_running) {
	    # -m or -X and EOF => Spread the arguments over all jobslots
	    # (unless they are already spread)
	    $already_spread ||= 1;
	    if($self->number_of_args() > 1) {
		$self->{'max_number_of_args'} =
		    ::ceil($self->number_of_args()/$Global::max_jobs_running);
		$Global::JobQueue->{'commandlinequeue'}->{'max_number_of_args'} =
		    $self->{'max_number_of_args'};
		$self->{'arg_queue'}->unget($self->pop_all());
		while($self->number_of_args() < $self->{'max_number_of_args'}) {
		    $self->push($self->{'arg_queue'}->get());
		}
	    }
	    $Global::JobQueue->flush_total_jobs();
	}

	if($opt::sqlmaster) {
	    # Insert the V1..Vn for this $seq in SQL table instead of generating one
	    $Global::sql->insert_records($self->seq(), $self->{'command'},
					 $self->{'arg_list_flat_orig'});
	}
    }
}

sub push($) {
    # Add one or more records as arguments
    # Returns: N/A
    my $self = shift;
    my $record = shift;
    push @{$self->{'arg_list_flat_orig'}}, map { $_->orig() } @$record;
    push @{$self->{'arg_list_flat'}}, @$record;
    push @{$self->{'arg_list'}}, $record;
    # Make @arg available for {= =}
    *Arg::arg = $self->{'arg_list_flat_orig'};

    my $quote_arg = ($Global::quote_replace and not $Global::quoting);
    for my $perlexpr (keys %{$self->{'replacecount'}}) {
	if($perlexpr =~ /^(\d+) /) {
	    # Positional
	    defined($record->[$1-1]) or next;
	    $self->{'len'}{$perlexpr} +=
		length $record->[$1-1]->replace($perlexpr,$quote_arg,$self);
	} else {
	    for my $arg (@$record) {
		if(defined $arg) {
		    $self->{'len'}{$perlexpr} +=
			length $arg->replace($perlexpr,$quote_arg,$self);
		}
	    }
	}
    }
}

sub pop($) {
    # Remove last argument
    # Returns:
    #   the last record
    my $self = shift;
    my $record = pop @{$self->{'arg_list'}};
    # pop off arguments from @$record
    splice @{$self->{'arg_list_flat_orig'}}, -($#$record+1), $#$record+1;
    splice @{$self->{'arg_list_flat'}}, -($#$record+1), $#$record+1;
    my $quote_arg = ($Global::quote_replace and not $Global::quoting);
    for my $perlexpr (keys %{$self->{'replacecount'}}) {
	if($perlexpr =~ /^(\d+) /) {
	    # Positional
	    defined($record->[$1-1]) or next;
	    $self->{'len'}{$perlexpr} -=
		length $record->[$1-1]->replace($perlexpr,$quote_arg,$self);
	} else {
	    for my $arg (@$record) {
		if(defined $arg) {
		    $self->{'len'}{$perlexpr} -=
			length $arg->replace($perlexpr,$quote_arg,$self);
		}
	    }
	}
    }
    return $record;
}

sub pop_all($) {
    # Remove all arguments and zeros the length of replacement perlexpr
    # Returns:
    #   all records
    my $self = shift;
    my @popped = @{$self->{'arg_list'}};
    for my $perlexpr (keys %{$self->{'replacecount'}}) {
	$self->{'len'}{$perlexpr} = 0;
    }
    $self->{'arg_list'} = [];
    $self->{'arg_list_flat_orig'} = [undef];
    $self->{'arg_list_flat'} = [];
    return @popped;
}

sub number_of_args($) {
    # The number of records
    # Returns:
    #   number of records
    my $self = shift;
    # This is really the number of records
    return $#{$self->{'arg_list'}}+1;
}

sub number_of_recargs($) {
    # The number of args in records
    # Returns:
    #   number of args records
    my $self = shift;
    my $sum = 0;
    my $nrec = scalar @{$self->{'arg_list'}};
    if($nrec) {
	$sum = $nrec * (scalar @{$self->{'arg_list'}[0]});
    }
    return $sum;
}

sub args_as_string($) {
    # Returns:
    #  all unmodified arguments joined with ' ' (similar to {})
    my $self = shift;
    return (join " ", map { $_->orig() }
	    map { @$_ } @{$self->{'arg_list'}});
}

sub results_out($) {
    sub max_file_name_length {
	# Figure out the max length of a subdir
	# TODO and the max total length
	# Ext4 = 255,130816
	# Uses:
	#   $Global::max_file_length is set
	# Returns:
	#   $Global::max_file_length
	my $testdir = shift;

	my $upper = 100_000_000;
	# Dir length of 8 chars is supported everywhere
	my $len = 8;
	my $dir = "x"x$len;
	do {
	    rmdir($testdir."/".$dir);
	    $len *= 16;
	    $dir = "x"x$len;
	} while ($len < $upper and mkdir $testdir."/".$dir);
	# Then search for the actual max length between $len/16 and $len
	my $min = $len/16;
	my $max = $len;
	while($max-$min > 5) {
	    # If we are within 5 chars of the exact value:
	    # it is not worth the extra time to find the exact value
	    my $test = int(($min+$max)/2);
	    $dir = "x"x$test;
	    if(mkdir $testdir."/".$dir) {
		rmdir($testdir."/".$dir);
		$min = $test;
	    } else {
		$max = $test;
	    }
	}
	$Global::max_file_length = $min;
	return $min;
    }

    my $self = shift;
    my $out = $self->replace_placeholders([$opt::results],0,0);
    if($out eq $opt::results) {
	# $opt::results simple string: Append args_as_dirname
	my $args_as_dirname = $self->args_as_dirname();
	# Output in: prefix/name1/val1/name2/val2/stdout
	$out = $opt::results."/".$args_as_dirname;
	if(-d $out or eval{ File::Path::mkpath($out); }) {
	    # OK
	} else {
	    # mkpath failed: Argument probably too long.
	    # Set $Global::max_file_length, which will keep the individual
	    # dir names shorter than the max length
	    max_file_name_length($opt::results);
	    $args_as_dirname = $self->args_as_dirname();
	    # prefix/name1/val1/name2/val2/
	    $out = $opt::results."/".$args_as_dirname;
	    File::Path::mkpath($out);
	}
	$out .="/";
    } else {
	if($out =~ m:/$:) {
	    # / = dir
	    if(-d $out or eval{ File::Path::mkpath($out); }) {
		# OK
	    } else {
		::error("Cannot make dir '$out'.");
		::wait_and_exit(255);
	    }
	} else {
	    $out =~ m:(.*)/:;
	    File::Path::mkpath($1);
	}
    }
    return $out;
}

sub args_as_dirname($) {
    # Returns:
    #  all unmodified arguments joined with '/' (similar to {})
    #  \t \0 \\ and / are quoted as: \t \0 \\ \_
    # If $Global::max_file_length: Keep subdirs < $Global::max_file_length
    my $self = shift;
    my @res = ();

    for my $rec_ref (@{$self->{'arg_list'}}) {
	# If headers are used, sort by them.
	# Otherwise keep the order from the command line.
	my @header_indexes_sorted = header_indexes_sorted($#$rec_ref+1);
	for my $n (@header_indexes_sorted) {
	    CORE::push(@res,
		 $Global::input_source_header{$n},
		 map { my $s = $_;
		       #  \t \0 \\ and / are quoted as: \t \0 \\ \_
		       $s =~ s/\\/\\\\/g;
		       $s =~ s/\t/\\t/g;
		       $s =~ s/\0/\\0/g;
		       $s =~ s:/:\\_:g;
		       if($Global::max_file_length) {
			   # Keep each subdir shorter than the longest
			   # allowed file name
			   $s = substr($s,0,$Global::max_file_length);
		       }
		       $s; }
		 $rec_ref->[$n-1]->orig());
	}
    }
    return join "/", @res;
}

sub header_indexes_sorted($) {
    # Sort headers first by number then by name.
    # E.g.: 1a 1b 11a 11b
    # Returns:
    #  Indexes of %Global::input_source_header sorted
    my $max_col = shift;

    no warnings 'numeric';
    for my $col (1 .. $max_col) {
	# Make sure the header is defined. If it is not: use column number
	if(not defined $Global::input_source_header{$col}) {
	    $Global::input_source_header{$col} = $col;
	}
    }
    my @header_indexes_sorted = sort {
	# Sort headers numerically then asciibetically
	$Global::input_source_header{$a} <=> $Global::input_source_header{$b}
	or
	    $Global::input_source_header{$a} cmp $Global::input_source_header{$b}
    } 1 .. $max_col;
    return @header_indexes_sorted;
}

sub len($) {
    # Uses:
    #   @opt::shellquote
    # The length of the command line with args substituted
    my $self = shift;
    my $len = 0;
    # Add length of the original command with no args
    # Length of command w/ all replacement args removed
    $len += $self->{'len'}{'noncontext'} + @{$self->{'command'}} -1;
    ::debug("length", "noncontext + command: $len\n");
    my $recargs = $self->number_of_recargs();
    if($self->{'context_replace'}) {
	# Context is duplicated for each arg
	$len += $recargs * $self->{'len'}{'context'};
	for my $replstring (keys %{$self->{'replacecount'}}) {
	    # If the replacements string is more than once: mulitply its length
	    $len += $self->{'len'}{$replstring} *
		$self->{'replacecount'}{$replstring};
	    ::debug("length", $replstring, " ", $self->{'len'}{$replstring}, "*",
		    $self->{'replacecount'}{$replstring}, "\n");
	}
	# echo 11 22 33 44 55 66 77 88 99 1010
	# echo 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
	# 5 +  ctxgrp*arg
	::debug("length", "Ctxgrp: ", $self->{'len'}{'contextgroups'},
		" Groups: ", $self->{'len'}{'noncontextgroups'}, "\n");
	# Add space between context groups
	$len += ($recargs-1) * ($self->{'len'}{'contextgroups'});
    } else {
	# Each replacement string may occur several times
	# Add the length for each time
	$len += 1*$self->{'len'}{'context'};
	::debug("length", "context+noncontext + command: $len\n");
	for my $replstring (keys %{$self->{'replacecount'}}) {
	    # (space between regargs + length of replacement)
	    # * number this replacement is used
	    $len += ($recargs -1 + $self->{'len'}{$replstring}) *
		$self->{'replacecount'}{$replstring};
	}
    }
    if(defined $Global::parallel_env) {
	# If we are using --env, add the prefix for that, too.
	$len += length $Global::parallel_env;
    }
    if($Global::quoting) {
	# Pessimistic length if -q is set
	# Worse than worst case: ' => "'" + " => '"'
	# TODO can we count the number of expanding chars?
	#   and count them in arguments, too?
	$len *= 3;
    }
    if(@opt::shellquote) {
	# Pessimistic length if --shellquote is set
	# Worse than worst case: ' => "'"
	for(@opt::shellquote) {
	    $len *= 3;
	}
	$len *= 5;
    }
    if(@opt::sshlogin) {
	# Pessimistic length if remote
	# Worst case is BASE64 encoding 3 bytes -> 4 bytes
	$len = int($len*4/3);
    }

    return $len;
}

sub replaced($) {
    # Uses:
    #   $Global::quote_replace
    #   $Global::quoting
    # Returns:
    #   $replaced = command with place holders replaced and prepended
    my $self = shift;
    if(not defined $self->{'replaced'}) {
	# Don't quote arguments if the input is the full command line
	my $quote_arg = ($Global::quote_replace and not $Global::quoting);
	# or if ($opt::cat or $opt::pipe) as they use $PARALLEL_TMP
	$quote_arg = ($opt::cat || $opt::fifo) ? 0 : $quote_arg;
	$self->{'replaced'} = $self->
	    replace_placeholders($self->{'command'},$Global::quoting,
				 $quote_arg);
	my $len = length $self->{'replaced'};
	if ($len != $self->len()) {
	    ::debug("length", $len, " != ", $self->len(),
		    " ", $self->{'replaced'}, "\n");
	} else {
	    ::debug("length", $len, " == ", $self->len(),
		    " ", $self->{'replaced'}, "\n");
	}
    }
    return $self->{'replaced'};
}

sub replace_placeholders($$$$) {
    # Replace foo{}bar with fooargbar
    # Input:
    #   $targetref = command as shell words
    #   $quote = should everything be quoted?
    #   $quote_arg = should replaced arguments be quoted?
    # Uses:
    #   @Arg::arg = arguments as strings to be use in {= =}
    # Returns:
    #   @target with placeholders replaced
    my $self = shift;
    my $targetref = shift;
    my $quote = shift;
    my $quote_arg = shift;
    my %replace;

    # Token description:
    #   \0spc = unquoted space
    #   \0end = last token element
    #   \0ign = dummy token to be ignored
    #   \257<...\257> = replacement expression
    #   " " = quoted space, that splits -X group
    #   text = normal text - possibly part of -X group
    my $spacer = 0;
    my @tokens = grep { length $_ > 0 } map {
	if(/^\257<|^ $/) {
	    # \257<...\257> or space
	    $_
	} else {
	    # Split each space/tab into a token
	    split /(?=\s)|(?<=\s)/
	}
    }
    # Split \257< ... \257> into own token
    map { split /(?=\257<)|(?<=\257>)/ }
    # Insert "\0spc" between every element
    # This space should never be quoted
    map { $spacer++ ? ("\0spc",$_) : $_ }
    map { $_ eq "" ? "\0empty" : $_ }
    @$targetref;

    if(not @tokens) {
	# @tokens is empty: Return empty array
	return @tokens;
    }
    ::debug("replace", "Tokens ".join":",@tokens,"\n");
    # Make it possible to use $arg[2] in {= =}
    *Arg::arg = $self->{'arg_list_flat_orig'};
    # Flat list:
    # $self->{'arg_list'} = [ [Arg11, Arg12], [Arg21, Arg22], [Arg31, Arg32] ]
    # $self->{'arg_list_flat'} = [ Arg11, Arg12, Arg21, Arg22, Arg31, Arg32 ]
    if(not @{$self->{'arg_list_flat'}}) {
	@{$self->{'arg_list_flat'}} = Arg->new("");
    }
    my $argref = $self->{'arg_list_flat'};
    # Number of arguments - used for positional arguments
    my $n = $#$argref+1;

    # $self is actually a CommandLine-object,
    # but it looks nice to be able to say {= $job->slot() =}
    my $job = $self;
    # @replaced = tokens with \257< \257> replaced
    my @replaced;
    if($self->{'context_replace'}) {
	my @ctxgroup;
	for my $t (@tokens,"\0end") {
	    # \0end = last token was end of tokens.
	    if($t eq "\t" or $t eq " " or $t eq "\0end" or $t eq "\0spc") {
		# Context group complete: Replace in it
		if(grep { /^\257</ } @ctxgroup) {
		    # Context group contains a replacement string:
		    # Copy once per arg
		    my $space = "\0ign";
		    for my $arg (@$argref) {
			my $normal_replace;
			# Push output
			# Put unquoted space before each context group
			# except the first
			CORE::push @replaced, $space, map {
			    $a = $_;
			    if($a =~
				s{\257<(-?\d+)?(.*)\257>}
			    {
				if($1) {
				    # Positional replace
				    # Find the relevant arg and replace it
				    ($argref->[$1 > 0 ? $1-1 : $n+$1] ? # If defined: replace
				     $argref->[$1 > 0 ? $1-1 : $n+$1]->
				     replace($2,$quote_arg,$self)
				     : "");
				} else {
				    # Normal replace
				    $normal_replace ||= 1;
				    ($arg ? $arg->replace($2,$quote_arg,$self) : "");
				}
			    }sgxe) {
				# Token is \257<..\257>
			    } else {
				if($Global::escape_string_present) {
				    # Command line contains \257:
				    # Unescape it \257\256 => \257
				    $a =~ s/\257\256/\257/g;
				}
			    }
			    $a
			} @ctxgroup;
			$normal_replace or last;
			$space = "\0spc";
		    }
		} else {
		    # Context group has no a replacement string: Copy it once
		    CORE::push @replaced, map {
			$Global::escape_string_present and s/\257\256/\257/g; $_;
		    } @ctxgroup;
		}
		# New context group
		@ctxgroup=();
	    }
	    if($t eq "\0spc" or $t eq " ") {
		CORE::push @replaced,$t;
	    } else {
		CORE::push @ctxgroup,$t;
	    }
	}
    } else {
	# @group = @token
	# Replace in group
	# Push output
	# repquote = no if {} first on line, no if $quote, yes otherwise
	for my $t (@tokens) {
	    if($t =~ /^\257</) {
		my $space = "\0ign";
		for my $arg (@$argref) {
		    my $normal_replace;
		    $a = $t;
		    $a =~
			s{\257<(-?\d+)?(.*)\257>}
		    {
			if($1) {
			    # Positional replace
			    # Find the relevant arg and replace it
			    ($argref->[$1 > 0 ? $1-1 : $n+$1] ?
			     # If defined: replace
			     $argref->[$1 > 0 ? $1-1 : $n+$1]->
			     replace($2,$quote_arg,$self)
			     : "");
			} else {
			    # Normal replace
			    $normal_replace ||= 1;
			    ($arg ? $arg->replace($2,$quote_arg,$self) : "");
			}
		    }sgxe;
		    CORE::push @replaced, $space, $a;
		    $normal_replace or last;
		    $space = "\0spc";
		}
	    } else {
		# No replacement
		CORE::push @replaced, map {
		    $Global::escape_string_present and s/\257\256/\257/g; $_;
		} $t;
	    }
	}
    }
    *Arg::arg = [];
    ::debug("replace","Replaced: ".join":",@replaced,"\n");

    # Put tokens into groups that may be quoted.
    my @quotegroup;
    my @quoted;
    for (map { $_ eq "\0empty" ? "" : $_ }
	 grep { $_ ne "\0ign" and $_ ne "\0noarg" and $_ ne "'\0noarg'" }
	 @replaced, "\0end") {
	if($_ eq "\0spc" or $_ eq "\0end") {
	    # \0spc splits quotable groups
	    if($quote) {
		if(@quotegroup) {
		    CORE::push @quoted, ::Q(join"",@quotegroup);;
		}
	    } else {
		CORE::push @quoted, join"",@quotegroup;
	    }
	    @quotegroup = ();
	} else {
	    CORE::push @quotegroup, $_;
	}
    }
    ::debug("replace","Quoted: ".join":",@quoted,"\n");
    return wantarray ? @quoted : "@quoted";
}

sub skip($) {
    # Skip this job
    my $self = shift;
    $self->{'skip'} = 1;
}


package CommandLineQueue;

sub new($) {
    my $class = shift;
    my $commandref = shift;
    my $read_from = shift;
    my $context_replace = shift || 0;
    my $max_number_of_args = shift;
    my $transfer_files = shift;
    my $return_files = shift;
    my @unget = ();
    my $posrpl;
    my ($replacecount_ref, $len_ref);
    my @command = @$commandref;
    my $seq = 1;
    # Replace replacement strings with {= perl expr =}
    # '{=' 'perlexpr' '=}'  => '{= perlexpr =}'
    @command = merge_rpl_parts(@command);

    # Protect matching inside {= perl expr =}
    # by replacing {= and =} with \257< and \257>
    # in options that can contain replacement strings:
    # @command, --transferfile, --return,
    # --tagstring, --workdir, --results
    for(@command, @$transfer_files, @$return_files,
	$opt::tagstring, $opt::workdir, $opt::results, $opt::retries) {
	# Skip if undefined
	$_ or next;
	# Escape \257 => \257\256
	$Global::escape_string_present += s/\257/\257\256/g;
	# Needs to match rightmost left parens (Perl defaults to leftmost)
	# to deal with: {={==} and {={==}=}
	# Replace {= -> \257<  and  =} -> \257>
	#
	# Complex way to do:
	#   s/{=(.*)=}/\257<$1\257>/g
	# which would not work
	s[\Q$Global::parensleft\E # Match {=
          # Match . unless the next string is {= or =}
          #   needed to force matching the shortest {= =}
          ((?:(?! \Q$Global::parensleft\E|\Q$Global::parensright\E ).)*?)
          \Q$Global::parensright\E ] # Match =}
	{\257<$1\257>}gxs;
	for my $rpl (sort { length $b <=> length $a } keys %Global::rpl) {
	    # Replace long --rpl's before short ones, as a short may be a
	    # substring of a long:
	    #   --rpl '% s/a/b/' --rpl '%% s/b/a/'
	    #
	    # Replace the shorthand string (--rpl)
	    # with the {= perl expr =}
	    #
	    # Avoid searching for shorthand strings inside existing {= perl expr =}
	    #
	    # Replace $$1 in {= perl expr =} with groupings in shorthand string
	    #
	    #   --rpl '{/(\.\S+)/(\.\S+)} s/$$1/$$2/g;'
	    #     echo {/.tar/.gz} ::: UU.tar.gz
	    my ($prefix,$grp_regexp,$postfix) =
		$rpl =~ /^( [^(]*  )    # Prefix - e.g. {%%
                          ( \(.*\) )?   # Group capture regexp - e.g (.*)
                          ( [^)]*  )$   # Postfix - e.g }
                        /xs;
	    $grp_regexp ||= '';
	    my $rplval = $Global::rpl{$rpl};
	    while(s{( (?: ^|\257> ) (?: [^\257]*|[\257][^<>] )*? )
                      # Don't replace after \257 unless \257>
                    \Q$prefix\E $grp_regexp \Q$postfix\E}
		  {
		      # The start remains the same
		      my $unchanged = $1;
		      # Dummy entry to start at 1.
		      my @grp = (1);
		      # $2 = first ()-group in $grp_regexp
		      # Put $2 in $grp[1], Put $3 in $grp[2]
		      # so first ()-group in $grp_regexp is $grp[1];
		      for(my $i = 2; defined $grp[$#grp]; $i++) {
			  push @grp, eval '$'.$i;
		      }
		      my $rv = $rplval;
		      # replace $$1 with $_pAr_gRp1, $$2 with $_pAr_gRp2
		      # in the code to be executed
		      $rv =~ s/\$\$ (\d+)/\$_pAr_gRp$1/gx;
		      # prepend with $_pAr_gRp1 = perlquote($1),
		      my $set_args = "";
		      for(my $i = 1;defined $grp[$i]; $i++) {
			  $set_args .= "\$_pAr_gRp$i = \"" .
			      ::perl_quote_scalar($grp[$i]) . "\";";
		      }
		      $unchanged . "\257<" . $set_args . $rv . "\257>"
		  }gxes) {
	    }
	    # Do the same for the positional replacement strings
	    $posrpl = $rpl;
	    if($posrpl =~ s/^\{//) {
		# Only do this if the shorthand start with {
		$prefix=~s/^\{//;
		# Don't replace after \257 unless \257>
		while(s{( (?: ^|\257> ) (?: [^\257]*|[\257][^<>] )*? )
		  \{(-?\d+) \s* \Q$prefix\E $grp_regexp \Q$postfix\E}
		      {
		      # The start remains the same
		      my $unchanged = $1;
		      my $position = $2;
		      # Dummy entry to start at 1.
		      my @grp = (1);
		      # $3 = first ()-group in $grp_regexp
		      # Put $3 in $grp[1], Put $4 in $grp[2]
		      # so first ()-group in $grp_regexp is $grp[1];
		      for(my $i = 3; defined $grp[$#grp]; $i++) {
			  push @grp, eval '$'.$i;
		      }
		      my $rv = $rplval;
		      # replace $$1 with $_pAr_gRp1, $$2 with $_pAr_gRp2
		      # in the code to be executed
		      $rv =~ s/\$\$ (\d+)/\$_pAr_gRp$1/gx;
		      # prepend with $_pAr_gRp1 = perlquote($1),
		      my $set_args = "";
		      for(my $i = 1;defined $grp[$i]; $i++) {
			  $set_args .= "\$_pAr_gRp$i = \"" .
			      ::perl_quote_scalar($grp[$i]) . "\";";
		      }
		      $unchanged . "\257<" . $position . $set_args . $rv . "\257>"
		  }gxes) {
		}
	    }
	}
    }

    # Add {} if no replacement strings in @command
    ($replacecount_ref, $len_ref, @command) =
	replacement_counts_and_lengths($transfer_files,$return_files,@command);
    if("@command" =~ /^[^ \t\n=]*\257</) {
	# Replacement string is (part of) the command (and not just
	# argument or variable definition V1={})
	# E.g. parallel {}, parallel my_{= s/_//=}, parallel {2}
	# Do no quote (Otherwise it will fail if the input contains spaces)
	$Global::quote_replace = 0;
    }

    if($opt::sqlmaster and $Global::sql->append()) {
	$seq = $Global::sql->max_seq() + 1;
    }

    return bless {
	'unget' => \@unget,
	'command' => \@command,
	'replacecount' => $replacecount_ref,
	'arg_queue' => RecordQueue->new($read_from,$opt::colsep),
	'context_replace' => $context_replace,
	'len' => $len_ref,
	'max_number_of_args' => $max_number_of_args,
	'size' => undef,
	'transfer_files' => $transfer_files,
	'return_files' => $return_files,
	'seq' => $seq,
    }, ref($class) || $class;
}

sub merge_rpl_parts($) {
    # '{=' 'perlexpr' '=}'  => '{= perlexpr =}'
    # Input:
    #   @in = the @command as given by the user
    # Uses:
    #   $Global::parensleft
    #   $Global::parensright
    # Returns:
    #   @command with parts merged to keep {= and =} as one
    my @in = @_;
    my @out;
    my $l = quotemeta($Global::parensleft);
    my $r = quotemeta($Global::parensright);

    while(@in) {
	my $s = shift @in;
	$_ = $s;
	# Remove matching (right most) parens
	while(s/(.*)$l.*?$r/$1/os) {}
	if(/$l/o) {
	    # Missing right parens
	    while(@in) {
		$s .= " ".shift @in;
		$_ = $s;
		while(s/(.*)$l.*?$r/$1/os) {}
		if(not /$l/o) {
		    last;
		}
	    }
	}
	push @out, $s;
    }
    return @out;
}

sub replacement_counts_and_lengths($$@) {
    # Count the number of different replacement strings.
    # Find the lengths of context for context groups and non-context
    # groups.
    # If no {} found in @command: add it to @command
    #
    # Input:
    #   \@transfer_files = array of filenames to transfer
    #   \@return_files = array of filenames to return
    #   @command = command template
    # Output:
    #   \%replacecount, \%len, @command
    my $transfer_files = shift;
    my $return_files = shift;
    my @command = @_;
    my (%replacecount,%len);
    my $sum = 0;
    while($sum == 0) {
	# Count how many times each replacement string is used
	my @cmd = @command;
	my $contextlen = 0;
	my $noncontextlen = 0;
	my $contextgroups = 0;
	for my $c (@cmd) {
	    while($c =~ s/ \257<( (?: [^\257]*|[\257][^<>] )*?)\257> /\000/xs) {
		# %replacecount = { "perlexpr" => number of times seen }
		# e.g { "s/a/b/" => 2 }
		$replacecount{$1}++;
		$sum++;
	    }
	    # Measure the length of the context around the {= perl expr =}
	    # Use that {=...=} has been replaced with \000 above
	    # So there is no need to deal with \257<
	    while($c =~ s/ (\S*\000\S*) //xs) {
		my $w = $1;
		$w =~ tr/\000//d; # Remove all \000's
		$contextlen += length($w);
		$contextgroups++;
	    }
	    # All {= perl expr =} have been removed: The rest is non-context
	    $noncontextlen += length $c;
	}
	for(@$transfer_files, @$return_files,
	    $opt::tagstring, $opt::workdir, $opt::results, $opt::retries) {
	    # Options that can contain replacement strings
	    $_ or next;
	    my $t = $_;
	    while($t =~ s/ \257<( (?: [^\257]*|[\257][^<>] )* )\257> //xs) {
		# %replacecount = { "perlexpr" => number of times seen }
		# e.g { "$_++" => 2 }
		# But for tagstring we just need to mark it as seen
		$replacecount{$1} ||= 1;
	    }
	}
	if($opt::bar) {
	    # If the command does not contain {} force it to be computed
	    # as it is being used by --bar
	    $replacecount{""} ||= 1;
	}

	$len{'context'} = 0+$contextlen;
	$len{'noncontext'} = $noncontextlen;
	$len{'contextgroups'} = $contextgroups;
	$len{'noncontextgroups'} = @cmd-$contextgroups;
	::debug("length", "@command Context: ", $len{'context'},
		" Non: ", $len{'noncontext'}, " Ctxgrp: ", $len{'contextgroups'},
		" NonCtxGrp: ", $len{'noncontextgroups'}, "\n");
	if($sum == 0) {
	    if(not @command) {
		# Default command = {}
		@command = ("\257<\257>");
	    } elsif(($opt::pipe or $opt::pipepart)
		    and not $opt::fifo and not $opt::cat) {
		# With --pipe / --pipe-part you can have no replacement
		last;
	    } else {
		# Append {} to the command if there are no {...}'s and no {=...=}
		push @command, ("\257<\257>");
	    }
	}
    }
    return(\%replacecount,\%len,@command);
}

sub get($) {
    my $self = shift;
    if(@{$self->{'unget'}}) {
	my $cmd_line = shift @{$self->{'unget'}};
	return ($cmd_line);
    } else {
	if($opt::sqlworker) {
	    # Get the sequence number from the SQL table
	    $self->set_seq($SQL::next_seq);
	    # Get the command from the SQL table
	    $self->{'command'} = $SQL::command_ref;
	    my @command;
	    # Recompute replace counts based on the read command
	    ($self->{'replacecount'},
	     $self->{'len'}, @command) =
		replacement_counts_and_lengths($self->{'transfer_files'},
					       $self->{'return_files'},
					       @$SQL::command_ref);
	    if("@command" =~ /^[^ \t\n=]*\257</) {
		# Replacement string is (part of) the command (and not just
		# argument or variable definition V1={})
		# E.g. parallel {}, parallel my_{= s/_//=}, parallel {2}
		# Do no quote (Otherwise it will fail if the input contains spaces)
		$Global::quote_replace = 0;
	    }
	}

	my $cmd_line = CommandLine->new($self->seq(),
					$self->{'command'},
					$self->{'arg_queue'},
					$self->{'context_replace'},
					$self->{'max_number_of_args'},
					$self->{'transfer_files'},
					$self->{'return_files'},
					$self->{'replacecount'},
					$self->{'len'},
	    );
	$cmd_line->populate();
	::debug("run","cmd_line->number_of_args ",
		$cmd_line->number_of_args(), "\n");
	if(not $Global::no_more_input and ($opt::pipe or $opt::pipepart)) {
	    if($cmd_line->replaced() eq "") {
		# Empty command - pipe requires a command
		::error("--pipe/--pipepart must have a command to pipe into ".
			"(e.g. 'cat').");
		::wait_and_exit(255);
	    }
	} elsif($cmd_line->number_of_args() == 0) {
	    # We did not get more args - maybe at EOF string?
	    return undef;
	}
	$self->set_seq($self->seq()+1);
	return $cmd_line;
    }
}

sub unget($) {
    my $self = shift;
    unshift @{$self->{'unget'}}, @_;
}

sub empty($) {
    my $self = shift;
    my $empty = (not @{$self->{'unget'}}) &&
	$self->{'arg_queue'}->empty();
    ::debug("run", "CommandLineQueue->empty $empty");
    return $empty;
}

sub seq($) {
    my $self = shift;
    return $self->{'seq'};
}

sub set_seq($$) {
    my $self = shift;
    $self->{'seq'} = shift;
}

sub quote_args($) {
    my $self = shift;
    # If there is not command emulate |bash
    return $self->{'command'};
}


package Limits::Command;

# Maximal command line length (for -m and -X)
sub max_length($) {
    # Find the max_length of a command line and cache it
    # Returns:
    #   number of chars on the longest command line allowed
    if(not $Limits::Command::line_max_len) {
	# Disk cache of max command line length
	my $len_cache = $Global::cache_dir . "/tmp/sshlogin/" . ::hostname() .
	    "/linelen";
	my $cached_limit;
	if(-e $len_cache) {
	    open(my $fh, "<", $len_cache) || ::die_bug("Cannot read $len_cache");
	    $cached_limit = <$fh>;
	    close $fh;
	} else {
	    $cached_limit = real_max_length();
	    # If $HOME is write protected: Do not fail
	    my $dir = ::dirname($len_cache);
	    -d $dir or eval { File::Path::mkpath($dir); };
	    open(my $fh, ">", $len_cache);
	    print $fh $cached_limit;
	    close $fh;
	}
	$Limits::Command::line_max_len = tmux_length($cached_limit);
	if($opt::max_chars) {
	    if($opt::max_chars <= $cached_limit) {
		$Limits::Command::line_max_len = $opt::max_chars;
	    } else {
		::warning("Value for -s option should be < $cached_limit.");
	    }
	}
    }
    return int($Limits::Command::line_max_len);
}

sub real_max_length($) {
    # Find the max_length of a command line
    # Returns:
    #   The maximal command line length
    # Use an upper bound of 100 MB if the shell allows for infinite long lengths
    my $upper = 100_000_000;
    # 1000 is supported everywhere, so the search can start anywhere 1..999
    # 324 makes the search much faster on CygWin, so let us use that
    my $len = 324;
    do {
	if($len > $upper) { return $len };
	$len *= 16;
    } while (is_acceptable_command_line_length($len));
    # Then search for the actual max length between 0 and upper bound
    return binary_find_max_length(int($len/16),$len);
}

# Prototype forwarding
sub binary_find_max_length($$);
sub binary_find_max_length($$) {
    # Given a lower and upper bound find the max_length of a command line
    # Returns:
    #   number of chars on the longest command line allowed
    my ($lower, $upper) = (@_);
    if($lower == $upper or $lower == $upper-1) { return $lower; }
    my $middle = int (($upper-$lower)/2 + $lower);
    ::debug("init", "Maxlen: $lower<$middle<$upper: ");
    if (is_acceptable_command_line_length($middle)) {
	return binary_find_max_length($middle,$upper);
    } else {
	return binary_find_max_length($lower,$middle);
    }
}

sub is_acceptable_command_line_length($) {
    # Test if a command line of this length can run
    # in the current environment
    # Returns:
    #   0 if the command line length is too long
    #   1 otherwise
    my $len = shift;
    if($Global::parallel_env) {
	$len += length $Global::parallel_env;
    }
    ::qqx("true "."x"x$len);
    ::debug("init", "$len=$? ");
    return not $?;
}

sub tmux_length($) {
    # If $opt::tmux set, find the limit for tmux
    # tmux 1.8 has a 2kB limit
    # tmux 1.9 has a 16kB limit
    # tmux 2.0 has a 16kB limit
    # tmux 2.1 has a 16kB limit
    # tmux 2.2 has a 16kB limit
    # Input:
    #   $len = maximal command line length
    # Returns:
    #   $tmux_len = maximal length runable in tmux
    local $/ = "\n";
    my $len = shift;
    if($opt::tmux) {
	$ENV{'PARALLEL_TMUX'} ||= "tmux";
	if(not ::which($ENV{'PARALLEL_TMUX'})) {
	    ::error($ENV{'PARALLEL_TMUX'}." not found in \$PATH.");
	    ::wait_and_exit(255);
	}
	my @out;
	for my $l (1, 2020, 16320, 100000, $len) {
	    my $tmpfile = ::tmpname("tms");
	    my $tmuxcmd = $ENV{'PARALLEL_TMUX'}.
		" -S $tmpfile new-session -d -n echo $l".
		("x"x$l). " && echo $l; rm -f $tmpfile";
	    push @out, ::qqx($tmuxcmd);
	    ::rm($tmpfile);
	}
	::debug("tmux","tmux-out ",@out);
	chomp @out;
	# The arguments is given 3 times on the command line
	# and the wrapping is around 30 chars
	# (29 for tmux1.9, 33 for tmux1.8)
	my $tmux_len = ::max(@out);
	$len = ::min($len,int($tmux_len/4-33));
	::debug("tmux","tmux-length ",$len);
    }
    return $len;
}


package RecordQueue;

sub new($) {
    my $class = shift;
    my $fhs = shift;
    my $colsep = shift;
    my @unget = ();
    my $arg_sub_queue;
    if($opt::sqlworker) {
	# Open SQL table
	$arg_sub_queue = SQLRecordQueue->new();
    } elsif(defined $colsep) {
	# Open one file with colsep or CSV
	$arg_sub_queue = RecordColQueue->new($fhs);
    } else {
	# Open one or more files if multiple -a
	$arg_sub_queue = MultifileQueue->new($fhs);
    }
    return bless {
	'unget' => \@unget,
	'arg_number' => 0,
	'arg_sub_queue' => $arg_sub_queue,
    }, ref($class) || $class;
}

sub get($) {
    # Returns:
    #   reference to array of Arg-objects
    my $self = shift;
    if(@{$self->{'unget'}}) {
	$self->{'arg_number'}++;
	# Flush cached computed replacements in Arg-objects
	# To fix: parallel --bar echo {%} ::: a b c ::: d e f
	my $ret = shift @{$self->{'unget'}};
	if($ret) {
	    map { $_->flush_cache() } @$ret;
	}
	return $ret;
    }
    my $ret = $self->{'arg_sub_queue'}->get();
    if($ret) {
	if(grep { index($_->orig(),"\0") > 0 } @$ret) {
	    # Allow for \0 in position 0 because Parallel uses "\0noarg"
	    # to mean no-string
	    ::warning("A NUL character in the input was replaced with \\0.",
		      "NUL cannot be passed through in the argument list.",
		      "Did you mean to use the --null option?");
	    for(grep { index($_->orig(),"\0") > 0 } @$ret) {
		# Replace \0 with \\0
		my $a = $_->orig();
		$a =~ s/\0/\\0/g;
		$_->set_orig($a);
	    }
	}
	if(defined $Global::max_number_of_args
	   and $Global::max_number_of_args == 0) {
	    ::debug("run", "Read 1 but return 0 args\n");
	    # \0noarg => nothing (not the empty string)
	    map { $_->set_orig("\0noarg"); } @$ret;
	}
	# Flush cached computed replacements in Arg-objects
	# To fix: parallel --bar echo {%} ::: a b c ::: d e f
    	map { $_->flush_cache() } @$ret;
    }
    return $ret;
}

sub unget($) {
    my $self = shift;
    ::debug("run", "RecordQueue-unget\n");
    $self->{'arg_number'} -= @_;
    unshift @{$self->{'unget'}}, @_;
}

sub empty($) {
    my $self = shift;
    my $empty = (not @{$self->{'unget'}}) &&
	$self->{'arg_sub_queue'}->empty();
    ::debug("run", "RecordQueue->empty $empty");
    return $empty;
}

sub arg_number($) {
    my $self = shift;
    return $self->{'arg_number'};
}


package RecordColQueue;

sub new($) {
    my $class = shift;
    my $fhs = shift;
    my @unget = ();
    my $arg_sub_queue = MultifileQueue->new($fhs);
    return bless {
	'unget' => \@unget,
	'arg_sub_queue' => $arg_sub_queue,
    }, ref($class) || $class;
}

sub get($) {
    # Returns:
    #   reference to array of Arg-objects
    my $self = shift;
    if(@{$self->{'unget'}}) {
	return shift @{$self->{'unget'}};
    }
    my $unget_ref = $self->{'unget'};
    if($self->{'arg_sub_queue'}->empty()) {
	return undef;
    }
    my $in_record = $self->{'arg_sub_queue'}->get();
    if(defined $in_record) {
	my @out_record = ();
	for my $arg (@$in_record) {
	    ::debug("run", "RecordColQueue::arg $arg\n");
	    my $line = $arg->orig();
	    ::debug("run", "line='$line'\n");
	    if($line ne "") {
		if($opt::csv) {
		    # Parse CSV
		    chomp $line;
		    if(not $Global::csv->parse($line)) {
			die "CSV has unexpected format: ^$line^";
		    }
		    for($Global::csv->fields()) {
			push @out_record, Arg->new($_);
		    }
		} else {
		    for my $s (split /$opt::colsep/o, $line, -1) {
			push @out_record, Arg->new($s);
		    }
		}
	    } else {
		push @out_record, Arg->new("");
	    }
	}
	return \@out_record;
    } else {
	return undef;
    }
}

sub unget($) {
    my $self = shift;
    ::debug("run", "RecordColQueue-unget '@_'\n");
    unshift @{$self->{'unget'}}, @_;
}

sub empty($) {
    my $self = shift;
    my $empty = (not @{$self->{'unget'}}) &&
	$self->{'arg_sub_queue'}->empty();
    ::debug("run", "RecordColQueue->empty $empty");
    return $empty;
}


package SQLRecordQueue;

sub new($) {
    my $class = shift;
    my @unget = ();
    return bless {
	'unget' => \@unget,
    }, ref($class) || $class;
}

sub get($) {
    # Returns:
    #   reference to array of Arg-objects
    my $self = shift;
    if(@{$self->{'unget'}}) {
	return shift @{$self->{'unget'}};
    }
    return $Global::sql->get_record();
}

sub unget($) {
    my $self = shift;
    ::debug("run", "SQLRecordQueue-unget '@_'\n");
    unshift @{$self->{'unget'}}, @_;
}

sub empty($) {
    my $self = shift;
    if(@{$self->{'unget'}}) { return 0; }
    my $get = $self->get();
    if(defined $get) {
	$self->unget($get);
    }
    my $empty = not $get;
    ::debug("run", "SQLRecordQueue->empty $empty");
    return $empty;
}


package MultifileQueue;

@Global::unget_argv=();

sub new($$) {
    my $class = shift;
    my $fhs = shift;
    for my $fh (@$fhs) {
	if(-t $fh and -t ($Global::status_fd || *STDERR)) {
	    ::warning("Input is read from the terminal. You are either an expert",
		      "(in which case: YOU ARE AWESOME!) or maybe you forgot",
		      "::: or :::: or -a or to pipe data into parallel. If so",
		      "consider going through the tutorial: man parallel_tutorial",
		      "Press CTRL-D to exit.");
	}
    }
    return bless {
	'unget' => \@Global::unget_argv,
	'fhs' => $fhs,
	'arg_matrix' => undef,
    }, ref($class) || $class;
}

sub get($) {
    my $self = shift;
    if($opt::link) {
	return $self->link_get();
    } else {
	return $self->nest_get();
    }
}

sub unget($) {
    my $self = shift;
    ::debug("run", "MultifileQueue-unget '@_'\n");
    unshift @{$self->{'unget'}}, @_;
}

sub empty($) {
    my $self = shift;
    my $empty = (not @Global::unget_argv) &&
	not @{$self->{'unget'}};
    for my $fh (@{$self->{'fhs'}}) {
	$empty &&= eof($fh);
    }
    ::debug("run", "MultifileQueue->empty $empty ");
    return $empty;
}

sub link_get($) {
    my $self = shift;
    if(@{$self->{'unget'}}) {
	return shift @{$self->{'unget'}};
    }
    my @record = ();
    my $prepend;
    my $empty = 1;
    for my $fh (@{$self->{'fhs'}}) {
	my $arg = read_arg_from_fh($fh);
	if(defined $arg) {
	    # Record $arg for recycling at end of file
	    push @{$self->{'arg_matrix'}{$fh}}, $arg;
	    push @record, $arg;
	    $empty = 0;
	} else {
	    ::debug("run", "EOA ");
	    # End of file: Recycle arguments
	    push @{$self->{'arg_matrix'}{$fh}}, shift @{$self->{'arg_matrix'}{$fh}};
	    # return last @{$args->{'args'}{$fh}};
	    push @record, @{$self->{'arg_matrix'}{$fh}}[-1];
	}
    }
    if($empty) {
	return undef;
    } else {
	return \@record;
    }
}

sub nest_get($) {
    my $self = shift;
    if(@{$self->{'unget'}}) {
	return shift @{$self->{'unget'}};
    }
    my @record = ();
    my $prepend;
    my $empty = 1;
    my $no_of_inputsources = $#{$self->{'fhs'}} + 1;
    if(not $self->{'arg_matrix'}) {
	# Initialize @arg_matrix with one arg from each file
	# read one line from each file
	my @first_arg_set;
	my $all_empty = 1;
	for (my $fhno = 0; $fhno < $no_of_inputsources ; $fhno++) {
	    my $arg = read_arg_from_fh($self->{'fhs'}[$fhno]);
	    if(defined $arg) {
		$all_empty = 0;
	    }
	    $self->{'arg_matrix'}[$fhno][0] = $arg || Arg->new("");
	    push @first_arg_set, $self->{'arg_matrix'}[$fhno][0];
	}
	if($all_empty) {
	    # All filehandles were at eof or eof-string
	    return undef;
	}
	return [@first_arg_set];
    }

    # Treat the case with one input source special.  For multiple
    # input sources we need to remember all previously read values to
    # generate all combinations. But for one input source we can
    # forget the value after first use.
    if($no_of_inputsources == 1) {
	my $arg = read_arg_from_fh($self->{'fhs'}[0]);
	if(defined($arg)) {
	    return [$arg];
	}
	return undef;
    }
    for (my $fhno = $no_of_inputsources - 1; $fhno >= 0; $fhno--) {
	if(eof($self->{'fhs'}[$fhno])) {
	    next;
	} else {
	    # read one
	    my $arg = read_arg_from_fh($self->{'fhs'}[$fhno]);
	    defined($arg) || next; # If we just read an EOF string: Treat this as EOF
	    my $len = $#{$self->{'arg_matrix'}[$fhno]} + 1;
	    $self->{'arg_matrix'}[$fhno][$len] = $arg;
	    # make all new combinations
	    my @combarg = ();
	    for (my $fhn = 0; $fhn < $no_of_inputsources; $fhn++) {
		push(@combarg, [0, $#{$self->{'arg_matrix'}[$fhn]}],
		     # Is input source --link'ed to the next?
		     $opt::linkinputsource[$fhn+1]);
	    }
	    # Find only combinations with this new entry
	    $combarg[2*$fhno] = [$len,$len];
	    # map combinations
	    # [ 1, 3, 7 ], [ 2, 4, 1 ]
	    # =>
	    # [ m[0][1], m[1][3], m[2][7] ], [ m[0][2], m[1][4], m[2][1] ]
	    my @mapped;
	    for my $c (expand_combinations(@combarg)) {
		my @a;
		for my $n (0 .. $no_of_inputsources - 1 ) {
		    push @a,  $self->{'arg_matrix'}[$n][$$c[$n]];
		}
		push @mapped, \@a;
	    }
	    # append the mapped to the ungotten arguments
	    push @{$self->{'unget'}}, @mapped;
	    # get the first
	    if(@mapped) {
		return shift @{$self->{'unget'}};
	    }
	}
    }
    # all are eof or at EOF string; return from the unget queue
    return shift @{$self->{'unget'}};
}

sub read_arg_from_fh($) {
    # Read one Arg from filehandle
    # Returns:
    #   Arg-object with one read line
    #   undef if end of file
    my $fh = shift;
    my $prepend;
    my $arg;
    my $half_record = 0;
    do {{
	# This makes 10% faster
	if(not defined ($arg = <$fh>)) {
	    if(defined $prepend) {
		return Arg->new($prepend);
	    } else {
		return undef;
	    }
	}
	if($opt::csv) {
	    # We need to read a full CSV line.
	    if(($arg =~ y/"/"/) % 2 ) {
		# The number of " on the line is uneven:
		# If we were in a half_record => we have a full record now
		# If we were ouside a half_record => we are in a half record now
		$half_record = not $half_record;
	    }
	    if($half_record) {
		# CSV half-record with quoting:
		#   col1,"col2 2""x3"" board newline  <-this one
		#   cont",col3
		$prepend .= $arg;
		redo;
	    } else {
		# Now we have a full CSV record
	    }
	}
	# Remove delimiter
	chomp $arg;
	if($Global::end_of_file_string and
	   $arg eq $Global::end_of_file_string) {
	    # Ignore the rest of input file
	    close $fh;
	    ::debug("run", "EOF-string ($arg) met\n");
	    if(defined $prepend) {
		return Arg->new($prepend);
	    } else {
		return undef;
	    }
	}
	if(defined $prepend) {
	    $arg = $prepend.$arg; # For line continuation
	    undef $prepend;
	}
	if($Global::ignore_empty) {
	    if($arg =~ /^\s*$/) {
		redo; # Try the next line
	    }
	}
	if($Global::max_lines) {
	    if($arg =~ /\s$/) {
		# Trailing space => continued on next line
		$prepend = $arg;
		redo;
	    }
	}
    }} while (1 == 0); # Dummy loop {{}} for redo
    if(defined $arg) {
	return Arg->new($arg);
    } else {
	::die_bug("multiread arg undefined");
    }
}

# Prototype forwarding
sub expand_combinations(@);
sub expand_combinations(@) {
    # Input:
    #   ([xmin,xmax], [ymin,ymax], ...)
    # Returns: ([x,y,...],[x,y,...])
    # where xmin <= x <= xmax and ymin <= y <= ymax
    my $minmax_ref = shift;
    my $link = shift; # This is linked to the next input source
    my $xmin = $$minmax_ref[0];
    my $xmax = $$minmax_ref[1];
    my @p;
    if(@_) {
	my @rest = expand_combinations(@_);
	if($link) {
	    # Linked to next col with --link/:::+/::::+
	    # TODO BUG does not wrap values if not same number of vals
	    push(@p, map { [$$_[0], @$_] }
		 grep { $xmin <= $$_[0] and $$_[0] <= $xmax } @rest);
	} else {
	    # If there are more columns: Compute those recursively
	    for(my $x = $xmin; $x <= $xmax; $x++) {
		push @p, map { [$x, @$_] } @rest;
	    }
	}
    } else {
	for(my $x = $xmin; $x <= $xmax; $x++) {
	    push @p, [$x];
	}
    }
    return @p;
}


package Arg;

sub new($) {
    my $class = shift;
    my $orig = shift;
    my @hostgroups;
    if($opt::hostgroups) {
	if($orig =~ s:@(.+)::) {
	    # We found hostgroups on the arg
	    @hostgroups = split(/\+/, $1);
	    if(not grep { defined $Global::hostgroups{$_} } @hostgroups) {
		# This hostgroup is not defined using -S
		# Add it
		::warning("Adding hostgroups: @hostgroups");
		# Add sshlogin
		for(grep { not defined $Global::hostgroups{$_} } @hostgroups) {
		    my $sshlogin = SSHLogin->new($_);
		    my $sshlogin_string = $sshlogin->string();
		    $Global::host{$sshlogin_string} = $sshlogin;
		    $Global::hostgroups{$sshlogin_string} = 1;
		}
	    }
        } else {
	    # No hostgroup on the arg => any hostgroup
	    @hostgroups = (keys %Global::hostgroups);
	}
    }
    return bless {
	'orig' => $orig,
	'hostgroups' => \@hostgroups,
    }, ref($class) || $class;
}

sub Q($) {
    # Q alias for ::shell_quote_scalar
    my $ret = ::Q($_[0]);
    no warnings 'redefine';
    *Q = \&::Q;
    return $ret;
}

sub pQ($) {
    # pQ alias for ::perl_quote_scalar
    my $ret = ::pQ($_[0]);
    no warnings 'redefine';
    *pQ = \&::pQ;
    return $ret;
}

sub total_jobs() {
    return $Global::JobQueue->total_jobs();
}

{
    my %perleval;
    my $job;
    sub skip() {
	# shorthand for $job->skip();
	$job->skip();
    }
    sub slot() {
	# shorthand for $job->slot();
	$job->slot();
    }
    sub seq() {
	# shorthand for $job->seq();
	$job->seq();
    }
    sub uq() {
	# Do not quote this arg
	$Global::unquote_arg = 1;
    }

    sub replace($$$$) {
	# Calculates the corresponding value for a given perl expression
	# Returns:
	#   The calculated string (quoted if asked for)
	my $self = shift;
	my $perlexpr = shift; # E.g. $_=$_ or s/.gz//
	my $quote = shift; # should the string be quoted?
	# This is actually a CommandLine-object,
	# but it looks nice to be able to say {= $job->slot() =}
	$job = shift;
	$perlexpr =~ s/^(-?\d+)? *//; # Positional replace treated as normal replace
	if(not $Global::cache_replacement_eval
	   or
	   not $self->{'cache'}{$perlexpr}) {
	    # Only compute the value once
	    # Use $_ as the variable to change
	    local $_;
	    if($Global::trim eq "n") {
		$_ = $self->{'orig'};
	    } else {
		# Trim the input
		$_ = trim_of($self->{'orig'});
	    }
	    ::debug("replace", "eval ", $perlexpr, " ", $_, "\n");
	    if(not $perleval{$perlexpr}) {
		# Make an anonymous function of the $perlexpr
		# And more importantly: Compile it only once
		if($perleval{$perlexpr} =
		   eval('sub { no strict; no warnings; my $job = shift; '.
			$perlexpr.' }')) {
		    # All is good
		} else {
		    # The eval failed. Maybe $perlexpr is invalid perl?
		    ::error("Cannot use $perlexpr: $@");
		    ::wait_and_exit(255);
		}
	    }
	    # Execute the function
	    $perleval{$perlexpr}->($job);
	    $self->{'cache'}{$perlexpr} = $_;
	    if($Global::unquote_arg) {
		# uq() was called in perlexpr
		$self->{'cache'}{'unquote'}{$perlexpr} = 1;
		# Reset for next perlexpr
		$Global::unquote_arg = 0;
	    }
	}
	# Return the value quoted if needed
	if($self->{'cache'}{'unquote'}{$perlexpr}) {
	    return($self->{'cache'}{$perlexpr});
	} else {
	    return($quote ? Q($self->{'cache'}{$perlexpr})
		   : $self->{'cache'}{$perlexpr});
	}
    }
}

sub flush_cache($) {
    # Flush cache of computed values
    my $self = shift;
    $self->{'cache'} = undef;
}

sub orig($) {
    my $self = shift;
    return $self->{'orig'};
}

sub set_orig($$) {
    my $self = shift;
    $self->{'orig'} = shift;
}

sub trim_of($) {
    # Removes white space as specifed by --trim:
    # n = nothing
    # l = start
    # r = end
    # lr|rl = both
    # Returns:
    #   string with white space removed as needed
    my @strings = map { defined $_ ? $_ : "" } (@_);
    my $arg;
    if($Global::trim eq "n") {
	# skip
    } elsif($Global::trim eq "l") {
	for my $arg (@strings) { $arg =~ s/^\s+//; }
    } elsif($Global::trim eq "r") {
	for my $arg (@strings) { $arg =~ s/\s+$//; }
    } elsif($Global::trim eq "rl" or $Global::trim eq "lr") {
	for my $arg (@strings) { $arg =~ s/^\s+//; $arg =~ s/\s+$//; }
    } else {
	::error("--trim must be one of: r l rl lr.");
	::wait_and_exit(255);
    }
    return wantarray ? @strings : "@strings";
}


package TimeoutQueue;

sub new($) {
    my $class = shift;
    my $delta_time = shift;
    my ($pct);
    if($delta_time =~ /(\d+(\.\d+)?)%/) {
	# Timeout in percent
	$pct = $1/100;
	$delta_time = 1_000_000;
    }
    $delta_time = ::multiply_time_units($delta_time);

    return bless {
	'queue' => [],
	'delta_time' => $delta_time,
	'pct' => $pct,
	'remedian_idx' => 0,
	'remedian_arr' => [],
	'remedian' => undef,
    }, ref($class) || $class;
}

sub delta_time($) {
    my $self = shift;
    return $self->{'delta_time'};
}

sub set_delta_time($$) {
    my $self = shift;
    $self->{'delta_time'} = shift;
}

sub remedian($) {
    my $self = shift;
    return $self->{'remedian'};
}

sub set_remedian($$) {
    # Set median of the last 999^3 (=997002999) values using Remedian
    #
    # Rousseeuw, Peter J., and Gilbert W. Bassett Jr. "The remedian: A
    # robust averaging method for large data sets." Journal of the
    # American Statistical Association 85.409 (1990): 97-104.
    my $self = shift;
    my $val = shift;
    my $i = $self->{'remedian_idx'}++;
    my $rref = $self->{'remedian_arr'};
    $rref->[0][$i%999] = $val;
    $rref->[1][$i/999%999] = (sort @{$rref->[0]})[$#{$rref->[0]}/2];
    $rref->[2][$i/999/999%999] = (sort @{$rref->[1]})[$#{$rref->[1]}/2];
    $self->{'remedian'} = (sort @{$rref->[2]})[$#{$rref->[2]}/2];
}

sub update_median_runtime($) {
    # Update delta_time based on runtime of finished job if timeout is
    # a percentage
    my $self = shift;
    my $runtime = shift;
    if($self->{'pct'}) {
	$self->set_remedian($runtime);
	$self->{'delta_time'} = $self->{'pct'} * $self->remedian();
	::debug("run", "Timeout: $self->{'delta_time'}s ");
    }
}

sub process_timeouts($) {
    # Check if there was a timeout
    my $self = shift;
    # $self->{'queue'} is sorted by start time
    while (@{$self->{'queue'}}) {
	my $job = $self->{'queue'}[0];
	if($job->endtime()) {
	    # Job already finished. No need to timeout the job
	    # This could be because of --keep-order
	    shift @{$self->{'queue'}};
	} elsif($job->is_timedout($self->{'delta_time'})) {
	    # Need to shift off queue before kill
	    # because kill calls usleep that calls process_timeouts
	    shift @{$self->{'queue'}};
	    ::warning("This job was killed because it timed out:",
		$job->replaced());
	    $job->kill();
	} else {
	    # Because they are sorted by start time the rest are later
	    last;
	}
    }
}

sub insert($) {
    my $self = shift;
    my $in = shift;
    push @{$self->{'queue'}}, $in;
}


package SQL;

sub new($) {
    my $class = shift;
    my $dburl = shift;
    $Global::use{"DBI"} ||= eval "use DBI; 1;";
    # +DBURL = append to this DBURL
    my $append = $dburl=~s/^\+//;
    my %options = parse_dburl(get_alias($dburl));
    my %driveralias = ("sqlite" => "SQLite",
		       "sqlite3" => "SQLite",
		       "pg" => "Pg",
		       "postgres" => "Pg",
		       "postgresql" => "Pg",
		       "csv" => "CSV",
		       "oracle" => "Oracle",
		       "ora" => "Oracle");
    my $driver = $driveralias{$options{'databasedriver'}} ||
	$options{'databasedriver'};
    my $database = $options{'database'};
    my $host = $options{'host'} ? ";host=".$options{'host'} : "";
    my $port = $options{'port'} ? ";port=".$options{'port'} : "";
    my $dsn = "DBI:$driver:dbname=$database$host$port";
    my $userid = $options{'user'};
    my $password = $options{'password'};;
    if(not grep /$driver/, DBI->available_drivers) {
	::error("$driver not supported. Are you missing a perl DBD::$driver module?");
	::wait_and_exit(255);
    }
    my $dbh = DBI->connect($dsn, $userid, $password,
			   { RaiseError => 1, AutoInactiveDestroy => 1 })
	or die $DBI::errstr;

    $dbh->{'PrintWarn'} = $Global::debug || 0;
    $dbh->{'PrintError'} = $Global::debug || 0;
    $dbh->{'RaiseError'} = 1;
    $dbh->{'ShowErrorStatement'} = 1;
    $dbh->{'HandleError'} = sub {};

    if(not defined $options{'table'}) {
	::error("The DBURL ($dburl) must contain a table.");
	::wait_and_exit(255);
    }

    return bless {
	'dbh' => $dbh,
	'driver' => $driver,
	'max_number_of_args' => undef,
	'table' => $options{'table'},
	'append' => $append,
    }, ref($class) || $class;
}

# Prototype forwarding
sub get_alias($);
sub get_alias($) {
    my $alias = shift;
    $alias =~ s/^(sql:)*//; # Accept aliases prepended with sql:
    if ($alias !~ /^:/) {
	return $alias;
    }

    # Find the alias
    my $path;
    if (-l $0) {
	($path) = readlink($0) =~ m|^(.*)/|;
    } else {
	($path) = $0 =~ m|^(.*)/|;
    }

    my @deprecated = ("$ENV{HOME}/.dburl.aliases",
		      "$path/dburl.aliases", "$path/dburl.aliases.dist");
    for (@deprecated) {
	if(-r $_) {
	    ::warning("$_ is deprecated. ".
		      "Use .sql/aliases instead (read man sql).");
	}
    }
    my @urlalias=();
    check_permissions("$ENV{HOME}/.sql/aliases");
    check_permissions("$ENV{HOME}/.dburl.aliases");
    my @search = ("$ENV{HOME}/.sql/aliases",
		  "$ENV{HOME}/.dburl.aliases", "/etc/sql/aliases",
		  "$path/dburl.aliases", "$path/dburl.aliases.dist");
    for my $alias_file (@search) {
	# local $/ needed if -0 set
	local $/ = "\n";
	if(-r $alias_file) {
	    open(my $in, "<", $alias_file) || die;
	    push @urlalias, <$in>;
	    close $in;
	}
    }
    my ($alias_part,$rest) = $alias=~/(:\w*)(.*)/;
    # If we saw this before: we have an alias loop
    if(grep {$_ eq $alias_part } @Private::seen_aliases) {
	::error("$alias_part is a cyclic alias.");
	exit -1;
    } else {
	push @Private::seen_aliases, $alias_part;
    }

    my $dburl;
    for (@urlalias) {
	/^$alias_part\s+(\S+.*)/ and do { $dburl = $1; last; }
    }

    if($dburl) {
	return get_alias($dburl.$rest);
    } else {
	::error("$alias is not defined in @search");
	exit(-1);
    }
}

sub check_permissions($) {
    my $file = shift;

    if(-e $file) {
	if(not -o $file) {
	    my $username = (getpwuid($<))[0];
	    ::warning("$file should be owned by $username: ".
		      "chown $username $file");
	}
	my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
	    $atime,$mtime,$ctime,$blksize,$blocks) = stat($file);
	if($mode & 077) {
	    my $username = (getpwuid($<))[0];
	    ::warning("$file should be only be readable by $username: ".
		      "chmod 600 $file");
	}
    }
}

sub parse_dburl($) {
    my $url = shift;
    my %options = ();
    # sql:mysql://[[user][:password]@][host][:port]/[database[/table][?query]]

    if($url=~m!^(?:sql:)? # You can prefix with 'sql:'
               ((?:oracle|ora|mysql|pg|postgres|postgresql)(?:s|ssl|)|
                 (?:sqlite|sqlite2|sqlite3|csv)):// # Databasedriver ($1)
               (?:
                ([^:@/][^:@]*|) # Username ($2)
                (?:
                 :([^@]*) # Password ($3)
                )?
               @)?
               ([^:/]*)? # Hostname ($4)
               (?:
                :
                ([^/]*)? # Port ($5)
               )?
               (?:
                /
                ([^/?]*)? # Database ($6)
               )?
               (?:
                /
                ([^?]*)? # Table ($7)
               )?
               (?:
                \?
                (.*)? # Query ($8)
               )?
              $!ix) {
	$options{databasedriver} = ::undef_if_empty(lc(uri_unescape($1)));
	$options{user} = ::undef_if_empty(uri_unescape($2));
	$options{password} = ::undef_if_empty(uri_unescape($3));
	$options{host} = ::undef_if_empty(uri_unescape($4));
	$options{port} = ::undef_if_empty(uri_unescape($5));
	$options{database} = ::undef_if_empty(uri_unescape($6));
	$options{table} = ::undef_if_empty(uri_unescape($7));
	$options{query} = ::undef_if_empty(uri_unescape($8));
	::debug("sql", "dburl $url\n");
	::debug("sql", "databasedriver ", $options{databasedriver},
		" user ", $options{user},
		" password ", $options{password}, " host ", $options{host},
		" port ", $options{port}, " database ", $options{database},
		" table ", $options{table}, " query ", $options{query}, "\n");
    } else {
	::error("$url is not a valid DBURL");
	exit 255;
    }
    return %options;
}

sub uri_unescape($) {
    # Copied from http://cpansearch.perl.org/src/GAAS/URI-1.55/URI/Escape.pm
    # to avoid depending on URI::Escape
    # This section is (C) Gisle Aas.
    # Note from RFC1630:  "Sequences which start with a percent sign
    # but are not followed by two hexadecimal characters are reserved
    # for future extension"
    my $str = shift;
    if (@_ && wantarray) {
	# not executed for the common case of a single argument
	my @str = ($str, @_);  # need to copy
	foreach (@str) {
	    s/%([0-9A-Fa-f]{2})/chr(hex($1))/eg;
	}
	return @str;
    }
    $str =~ s/%([0-9A-Fa-f]{2})/chr(hex($1))/eg if defined $str;
    $str;
}

sub run($) {
    my $self = shift;
    my $stmt = shift;
    if($self->{'driver'} eq "CSV") {
	$stmt=~ s/;$//;
	if($stmt eq "BEGIN" or
	   $stmt eq "COMMIT") {
	    return undef;
	}
    }
    my @retval;
    my $dbh = $self->{'dbh'};
    ::debug("sql","$opt::sqlmaster$opt::sqlworker run $stmt\n");
    # Execute with the rest of the args - if any
    my $rv;
    my $sth;
    my $lockretry = 0;
    while($lockretry < 10) {
	$sth = $dbh->prepare($stmt);
	if($sth
	   and
	   eval { $rv = $sth->execute(@_) }) {
	    last;
	} else {
	    if($@ =~ /no such table|Table .* doesn.t exist|relation ".*" does not exist/
	       or
	       $DBI::errstr =~ /no such table|Table .* doesn.t exist|relation ".*" does not exist/) {
		# This is fine:
		# It is just a worker that reported back too late -
		# another worker had finished the job first
		# and the table was then dropped
		$rv = $sth = 0;
		last;
	    }
	    if($DBI::errstr =~ /locked/) {
		::debug("sql", "Lock retry: $lockretry");
		$lockretry++;
		::usleep(rand()*300);
	    } elsif(not $sth) {
		# Try again
		$lockretry++;
	    } else {
		::error($DBI::errstr);
		::wait_and_exit(255);
	    }
	}
    }
    if($lockretry >= 10) {
	::die_bug("retry > 10: $DBI::errstr");
    }
    if($rv < 0 and $DBI::errstr){
	::error($DBI::errstr);
	::wait_and_exit(255);
    }
    return $sth;
}

sub get($) {
    my $self = shift;
    my $sth = $self->run(@_);
    my @retval;
    # If $sth = 0 it means the table was dropped by another process
    while($sth) {
	my @row = $sth->fetchrow_array();
	@row or last;
	push @retval, \@row;
    }
    return \@retval;
}

sub table($) {
    my $self = shift;
    return $self->{'table'};
}

sub append($) {
    my $self = shift;
    return $self->{'append'};
}

sub update($) {
    my $self = shift;
    my $stmt = shift;
    my $table = $self->table();
    $self->run("UPDATE $table $stmt",@_);
}

sub output($) {
    my $self = shift;
    my $commandline = shift;

    $self->update("SET Stdout = ?, Stderr = ? WHERE Seq = ".
		  $commandline->seq(),
		  join("",@{$commandline->{'output'}{1}}),
		  join("",@{$commandline->{'output'}{2}}));
}

sub max_number_of_args($) {
    # Maximal number of args for this table
    my $self = shift;
    if(not $self->{'max_number_of_args'}) {
	# Read the number of args from the SQL table
	my $table = $self->table();
	my $v = $self->get("SELECT * FROM $table LIMIT 1;");
	my @reserved_columns = qw(Seq Host Starttime JobRuntime Send
	    Receive Exitval _Signal Command Stdout Stderr);
	if(not $v) {
	    ::error("$table contains no records");
	}
	# Count the number of Vx columns
	$self->{'max_number_of_args'} = $#{$v->[0]} - $#reserved_columns;
    }
    return $self->{'max_number_of_args'};
}

sub set_max_number_of_args($$) {
    my $self = shift;
    $self->{'max_number_of_args'} = shift;
}

sub create_table($) {
    my $self = shift;
    if($self->append()) { return; }
    my $max_number_of_args = shift;
    $self->set_max_number_of_args($max_number_of_args);
    my $table = $self->table();
    $self->run(qq(DROP TABLE IF EXISTS $table;));
    # BIGINT and TEXT are not supported in these databases or are too small
    my %vartype = (
	"Oracle" => { "BIGINT" => "NUMBER(19,0)",
		      "TEXT" => "CLOB", },
	"mysql" => { "TEXT" => "LONGTEXT", },
	"CSV" => { "BIGINT" => "INT",
		   "FLOAT" => "REAL", },
	);
    my $BIGINT = $vartype{$self->{'driver'}}{"BIGINT"} || "BIGINT";
    my $TEXT = $vartype{$self->{'driver'}}{"TEXT"} || "TEXT";
    my $FLOAT = $vartype{$self->{'driver'}}{"FLOAT"} || "FLOAT(44)";
    my $v_def = join "", map { "V$_ $TEXT," } (1..$self->max_number_of_args());
    $self->run(qq{CREATE TABLE $table
		(Seq $BIGINT,
		 Host $TEXT,
		 Starttime $FLOAT,
		 JobRuntime $FLOAT,
		 Send $BIGINT,
		 Receive $BIGINT,
		 Exitval $BIGINT,
		 _Signal $BIGINT,
		 Command $TEXT,}.
	       $v_def.
	       qq{Stdout $TEXT,
		 Stderr $TEXT);});
}

sub insert_records($) {
    my $self = shift;
    my $seq = shift;
    my $command_ref = shift;
    my $record_ref = shift;
    my $table = $self->table();
    # For SQL encode the command with \257 space as split points
    my $command = join("\257 ",@$command_ref);
    my @v_cols = map { ", V$_" } (1..$self->max_number_of_args());
    # Two extra value due to $seq, Exitval, Send
    my $v_vals = join ",", map { "?" } (1..$self->max_number_of_args()+4);
    $self->run("INSERT INTO $table (Seq,Command,Exitval,Send @v_cols) ".
	       "VALUES ($v_vals);", $seq, $command, -1000,
	       0, @$record_ref[1..$#$record_ref]);
}

sub get_record($) {
    my $self = shift;
    my @retval;
    my $table = $self->table();
    my @v_cols = map { ", V$_" } (1..$self->max_number_of_args());
    my $v = $self->get("SELECT Seq, Command @v_cols FROM $table ".
		       "WHERE Exitval = -1000 ORDER BY Seq LIMIT 1;");
    if($v->[0]) {
	my $val_ref = $v->[0];
	# Mark record as taken
	my $seq = shift @$val_ref;
	# Save the sequence number to use when running the job
	$SQL::next_seq = $seq;
	$self->update("SET Exitval = ? WHERE Seq = ".$seq, -1220);
	my @command = split /\257 /, shift @$val_ref;
	$SQL::command_ref = \@command;
	for (@$val_ref) {
	    push @retval, Arg->new($_);
	}
    }
    if(@retval) {
	return \@retval;
    } else {
	return undef;
    }
}

sub total_jobs($) {
    my $self = shift;
    my $table = $self->table();
    my $v = $self->get("SELECT count(*) FROM $table;");
    if($v->[0]) {
	return $v->[0]->[0];
    } else {
	::die_bug("SQL::total_jobs");
    }
}

sub max_seq($) {
    my $self = shift;
    my $table = $self->table();
    my $v = $self->get("SELECT max(Seq) FROM $table;");
    if($v->[0]) {
	return $v->[0]->[0];
    } else {
	::die_bug("SQL::max_seq");
    }
}

sub finished($) {
    # Check if there are any jobs left in the SQL table that do not
    # have a "real" exitval
    my $self = shift;
    if($opt::wait or $Global::start_sqlworker) {
	my $table = $self->table();
	my $rv = $self->get("select Seq,Exitval from $table ".
			    "where Exitval <= -1000 limit 1");
	return not $rv->[0];
    } else {
	return 1;
    }
}

package Semaphore;

# This package provides a counting semaphore
#
# If a process dies without releasing the semaphore the next process
# that needs that entry will clean up dead semaphores
#
# The semaphores are stored in $PARALLEL_HOME/semaphores/id-<name> Each
# file in $PARALLEL_HOME/semaphores/id-<name>/ is the process ID of the
# process holding the entry. If the process dies, the entry can be
# taken by another process.

sub new($) {
    my $class = shift;
    my $id = shift;
    my $count = shift;
    $id =~ s/([^-_a-z0-9])/unpack("H*",$1)/ige; # Convert non-word chars to hex
    $id = "id-".$id; # To distinguish it from a process id
    my $parallel_locks = $Global::cache_dir . "/semaphores";
    -d $parallel_locks or ::mkdir_or_die($parallel_locks);
    my $lockdir = "$parallel_locks/$id";

    my $lockfile = $lockdir.".lock";
    if($count < 1) { ::die_bug("semaphore-count: $count"); }
    return bless {
	'lockfile' => $lockfile,
	'lockfh' => Symbol::gensym(),
	'lockdir' => $lockdir,
	'id' => $id,
	'idfile' => $lockdir."/".$id,
	'pid' => $$,
	'pidfile' => $lockdir."/".$$.'@'.::hostname(),
	'count' => $count + 1 # nlinks returns a link for the 'id-' as well
    }, ref($class) || $class;
}

sub remove_dead_locks($) {
    my $self = shift;
    my $lockdir = $self->{'lockdir'};

    for my $d (glob "$lockdir/*") {
	$d =~ m:$lockdir/([0-9]+)\@([-\._a-z0-9]+)$:o or next;
	my ($pid, $host) = ($1, $2);
	if($host eq ::hostname()) {
	    if(kill 0, $pid) {
		::debug("sem", "Alive: $pid $d\n");
	    } else {
		::debug("sem", "Dead: $d\n");
		::rm($d);
	    }
	}
    }
}

sub acquire($) {
    my $self = shift;
    my $sleep = 1; # 1 ms
    my $start_time = time;
    while(1) {
	# Can we get a lock?
	$self->atomic_link_if_count_less_than() and last;
	$self->remove_dead_locks();
	# Retry slower and slower up to 1 second
	$sleep = ($sleep < 1000) ? ($sleep * 1.1) : ($sleep);
	# Random to avoid every sleeping job waking up at the same time
	::usleep(rand()*$sleep);
	if($opt::semaphoretimeout) {
	    if($opt::semaphoretimeout > 0
	       and
	       time - $start_time > $opt::semaphoretimeout) {
		# Timeout: Take the semaphore anyway
		::warning("Semaphore timed out. Stealing the semaphore.");
		if(not -e $self->{'idfile'}) {
		    open (my $fh, ">", $self->{'idfile'}) or
			::die_bug("timeout_write_idfile: $self->{'idfile'}");
		    close $fh;
		}
		link $self->{'idfile'}, $self->{'pidfile'};
		last;
	    }
	    if($opt::semaphoretimeout < 0
	       and
	       time - $start_time > -$opt::semaphoretimeout) {
		# Timeout: Exit
		::warning("Semaphore timed out. Exiting.");
		exit(1);
		last;
	    }
	}
    }
    ::debug("sem", "acquired $self->{'pid'}\n");
}

sub release($) {
    my $self = shift;
    ::rm($self->{'pidfile'});
    if($self->nlinks() == 1) {
	# This is the last link, so atomic cleanup
	$self->lock();
	if($self->nlinks() == 1) {
	    ::rm($self->{'idfile'});
	    rmdir $self->{'lockdir'};
	}
	$self->unlock();
    }
    ::debug("run", "released $self->{'pid'}\n");
}

sub pid_change($) {
    # This should do what release()+acquire() would do without having
    # to re-acquire the semaphore
    my $self = shift;

    my $old_pidfile =  $self->{'pidfile'};
    $self->{'pid'} = $$;
    $self->{'pidfile'} = $self->{'lockdir'}."/".$$.'@'.::hostname();
    my $retval = link $self->{'idfile'}, $self->{'pidfile'};
    ::debug("sem","link($self->{'idfile'},$self->{'pidfile'})=$retval\n");
    ::rm($old_pidfile);
}

sub atomic_link_if_count_less_than($) {
    # Link $file1 to $file2 if nlinks to $file1 < $count
    my $self = shift;
    my $retval = 0;
    $self->lock();
    my $nlinks = $self->nlinks();
    ::debug("sem","$nlinks<$self->{'count'} ");
    if($nlinks < $self->{'count'}) {
	-d $self->{'lockdir'} or ::mkdir_or_die($self->{'lockdir'});
	if(not -e $self->{'idfile'}) {
	    open (my $fh, ">", $self->{'idfile'}) or
		::die_bug("write_idfile: $self->{'idfile'}");
	    close $fh;
	}
	$retval = link $self->{'idfile'}, $self->{'pidfile'};
	::debug("sem","link($self->{'idfile'},$self->{'pidfile'})=$retval\n");
    }
    $self->unlock();
    ::debug("sem", "atomic $retval");
    return $retval;
}

sub nlinks($) {
    my $self = shift;
    if(-e $self->{'idfile'}) {
	return (stat(_))[3];
    } else {
	return 0;
    }
}

sub lock($) {
    my $self = shift;
    my $sleep = 100; # 100 ms
    my $total_sleep = 0;
    $Global::use{"Fcntl"} ||= eval "use Fcntl qw(:DEFAULT :flock); 1;";
    my $locked = 0;
    while(not $locked) {
	if(tell($self->{'lockfh'}) == -1) {
	    # File not open
	    open($self->{'lockfh'}, ">", $self->{'lockfile'})
		or ::debug("run", "Cannot open $self->{'lockfile'}");
	}
	if($self->{'lockfh'}) {
	    # File is open
	    chmod 0666, $self->{'lockfile'}; # assuming you want it a+rw
	    if(flock($self->{'lockfh'}, LOCK_EX()|LOCK_NB())) {
		# The file is locked: No need to retry
		$locked = 1;
		last;
	    } else {
		if ($! =~ m/Function not implemented/) {
		    ::warning("flock: $!",
			      "Will wait for a random while.");
		    ::usleep(rand(5000));
		    # File cannot be locked: No need to retry
		    $locked = 2;
		    last;
		}
	    }
	}
	# Locking failed in first round
	# Sleep and try again
	$sleep = ($sleep < 1000) ? ($sleep * 1.1) : ($sleep);
	# Random to avoid every sleeping job waking up at the same time
	::usleep(rand()*$sleep);
	$total_sleep += $sleep;
	if($opt::semaphoretimeout) {
	    if($opt::semaphoretimeout > 0
	       and
	       $total_sleep/1000 > $opt::semaphoretimeout) {
		# Timeout: Take the semaphore anyway
		::warning("Semaphore timed out. Taking the semaphore.");
		$locked = 3;
		last;
	    }
	    if($opt::semaphoretimeout < 0
	       and
	       $total_sleep/1000 > -$opt::semaphoretimeout) {
		# Timeout: Exit
		::warning("Semaphore timed out. Exiting.");
		$locked = 4;
		last;
	    }
	} else {
	    if($total_sleep/1000 > 30) {
		::warning("Semaphore stuck for 30 seconds. ".
			  "Consider using --semaphoretimeout.");
	    }
	}
    }
    ::debug("run", "locked $self->{'lockfile'}");
}

sub unlock($) {
    my $self = shift;
    ::rm($self->{'lockfile'});
    close $self->{'lockfh'};
    ::debug("run", "unlocked\n");
}

# Keep perl -w happy

$opt::x = $Semaphore::timeout = $Semaphore::wait =
$Job::file_descriptor_warning_printed = $Global::envdef = @Arg::arg =
$Global::max_slot_number = $opt::session;

package main;

sub main() {
    save_stdin_stdout_stderr();
    save_original_signal_handler();
    parse_options();
    ::debug("init", "Open file descriptors: ", join(" ",keys %Global::fd), "\n");
    my $number_of_args;
    if($Global::max_number_of_args) {
	$number_of_args = $Global::max_number_of_args;
    } elsif ($opt::X or $opt::m or $opt::xargs) {
	$number_of_args = undef;
    } else {
	$number_of_args = 1;
    }

    my @command = @ARGV;
    my @input_source_fh;
    if($opt::pipepart) {
	if($opt::tee) {
	    @input_source_fh = map { open_or_exit($_) } @opt::a;
	    # Remove the first: It will be the file piped.
	    shift @input_source_fh;
	    if(not @input_source_fh and not $opt::pipe) {
		@input_source_fh = (*STDIN);
	    }
	} else {
	    # -a is used for data - not for command line args
	    @input_source_fh = map { open_or_exit($_) } "/dev/null";
	}
    } else {
	@input_source_fh = map { open_or_exit($_) } @opt::a;
	if(not @input_source_fh and not $opt::pipe) {
	    @input_source_fh = (*STDIN);
	}
    }
    if($opt::sqlmaster) {
	# Create SQL table to hold joblog + output
	$Global::sql->create_table($#input_source_fh+1);
	if($opt::sqlworker) {
	    # Start a real --sqlworker in the background later
	    $Global::start_sqlworker = 1;
	    $opt::sqlworker = undef;
	}
    }

    if($opt::skip_first_line) {
	# Skip the first line for the first file handle
	my $fh = $input_source_fh[0];
	<$fh>;
    }

    set_input_source_header(\@command,\@input_source_fh);
    if($opt::filter_hosts and (@opt::sshlogin or @opt::sshloginfile)) {
	# Parallel check all hosts are up. Remove hosts that are down
	filter_hosts();
    }

    if($opt::nonall or $opt::onall) {
	onall(\@input_source_fh,@command);
	wait_and_exit(min(undef_as_zero($Global::exitstatus),254));
    }

    $Global::JobQueue = JobQueue->new(
	\@command,\@input_source_fh,$Global::ContextReplace,
	$number_of_args,\@Global::transfer_files,\@Global::ret_files);

    if($opt::pipepart) {
	pipepart_setup();
    } elsif($opt::pipe and $opt::tee) {
	pipe_tee_setup();
    } elsif($opt::pipe and $opt::shard or $opt::bin) {
	pipe_shard_setup();
    }

    if(not $opt::pipepart and $opt::groupby) {
	group_by_stdin_filter();
    }
    if($opt::eta or $opt::bar or $opt::shuf or $Global::halt_pct) {
	# Count the number of jobs or shuffle all jobs
	# before starting any.
	# Must be done after ungetting any --pipepart jobs.
	$Global::JobQueue->total_jobs();
    }
    # Compute $Global::max_jobs_running
    # Must be done after ungetting any --pipepart jobs.
    max_jobs_running();
    init_run_jobs();
    my $sem;
    if($Global::semaphore) {
	$sem = acquire_semaphore();
    }
    $SIG{TERM} = $Global::original_sig{TERM};
    $SIG{HUP} = \&start_no_new_jobs;

    if($opt::tee or $opt::shard or $opt::bin) {
	# All jobs must be running in parallel for --tee/--shard/--bin
	while(start_more_jobs()) {}
	$Global::start_no_new_jobs = 1;
	if(not $Global::JobQueue->empty()) {
	    if($opt::tee) {
		::error("--tee requires --jobs to be higher. Try --jobs 0.");
	    } elsif($opt::bin) {
		::error("--bin requires --jobs to be higher than the number of",
			"arguments. Increase --jobs.");
	    } elsif($opt::shard) {
		::error("--shard requires --jobs to be higher than the number of",
			"arguments. Increase --jobs.");
	    } else {
		::die_bug("--bin/--shard/--tee should not get here");
	    }
	    ::wait_and_exit(255);
	}
    } elsif($opt::pipe and not $opt::pipepart) {
	# Fill all jobslots
	while(start_more_jobs()) {}
	spreadstdin();
    } else {
	# Reap one - start one
	while(reaper() + start_more_jobs()) {}
    }
    ::debug("init", "Start draining\n");
    drain_job_queue(@command);
    ::debug("init", "Done draining\n");
    reapers();
    ::debug("init", "Done reaping\n");
    if($Global::semaphore) {
	$sem->release();
    }
    cleanup();
    ::debug("init", "Halt\n");
    halt();
}

main();
