#!/bin/sh
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.

set -e
vardir="$1"
method=$2
option=$3

cd "$vardir/methods/disk"
tp=/var/run/ddm$$

iarch=`dpkg --admindir $vardir --print-architecture`

xit=1
trap '
	rm -f $tp.?
	if [ -n "$umount" ]
	then
		umount "$umount" >/dev/null 2>&1
	fi
	exit $xit
' 0

if ls -d "$tp.?" >/dev/null 2>&1
then
	rm $tp.?
fi

yesno () {
	while true
	do
		echo -n "$2 [$1]  "
		read response
		if [ -z "$response" ]
		then
			response="$1"
		fi
		case "$response" in
		[Nn]*)	yesno=no ; return ;;
		[Yy]*)	yesno=yes ; return ;;
		esac
	done
}

outputparam () {
	echo "$2" | sed -e "s/'/'\\\\''/; s/^/$1='/; s/$/'/" >&3
}

intrkey="`stty -a | sed -n 's/.*intr = \([^;]*\);.*/\1/p'`"
echo "
If you make a mistake, use the interrupt key ($intrkey) to abort.
"

# State variables, “best first”
#  {main,ctb,nf,lcl}_{packages,binary}
#   Empty before we've found them or if they're not available,
#   set to the relevant bit under mountpoint otherwise.
#  hierbase
#   A directory containing a Debian FTP site mirror tree for ONE distribution.
#	eg /pub/debian/dists/stable
#  mountpoint
#   The mountpoint for the filesystem containing the stuff
#   empty or unset if we don't know yet, or if we haven't mounted anything;
#   may also be empty if ‘directory’ was set.
#  blockdevice
#   The actual block device to mount.
#  fstype
#   The filesystem type to use.
#  defaultdevice
#   The default block device to mount.

if [ -f shvar.$option ]
then
	. ./shvar.$option
	defaultdevice="$p_blockdev"
fi

if [ -n "$mountpoint" ]
then
	# We must have $mountpoint
	echo \
"All directory names should be entered relative to the root of the
$fstype filesystem on $blockdevice.
"
fi

while true
do
	echo \
"In order to make it easy to find the relevant files, it is preferred
to install from a straightforward copy of the Debian distribution.
To use this, it is required to know where the top level of that copy of
the distribution is (eg. 'debian/dists/stable') - this directory usually
contains the Packages-Master file.

If you do not have a straightforward copy of the distribution available
just answer 'none' and each needed part will be prompted individually."
	defhierbase=none
# maybe ask for debian/dists and then show and ask for available dists
# eg. {stable,frozen,unstable,bo,hamm,slink}
	if [ -n "$p_hierbase" ]
	then
		if [ -d "$mountpoint/$p_hierbase/main/binary-$iarch" ]
		then
			echo "
Last time you said '$p_hierbase', and that looks plausible."
			defhierbase="$p_hierbase"
		else
			echo "
Last time you said '$p_hierbase', but that doesn't look plausible,
since '$p_hierbase/main/binary-$iarch' doesn't seem to exist."
		fi
	fi
	if [ none = "$defhierbase" ]
	then
		if [ -d "$mountpoint/debian/dists/stable/main/binary-$iarch" ]
		then
			echo "
'/debian/dists/stable' exists and looks plausible, so that's the default."
			defhierbase=/debian/dists/stable
		elif [ -d "$mountpoint/dists/stable/main/binary-$iarch" ]
		then
			echo "
'/dists/stable' exists and looks plausible, so that's the default."
			defhierbase=/dists/stable
		fi
	fi
	echo -n \
"Distribution top level ? [$defhierbase]  "
	read response
	if [ -z "$response" ]
	then
		response="$defhierbase"
	fi
	if [ none = "$response" ]
	then
		hierbase=""
		break
	elif [ -d "$mountpoint/$response/main/binary-$iarch" ]
	then
		hierbase="`echo \"$response\" | sed -e 's:/*$::; s:^/*:/:'`"
		break
	fi
	echo \
"$response/main/binary-$iarch does not exist.
"
done


case "$hierbase" in
/* )	;;
'' )	;;
* )	hierbase="/$hierbase" ;;
esac

check_binary () {
	# args: area-in-messages directory
	# eg:   main             "$hierbase/main/binary-$iarch"
	# checks whether $2 contains *.deb
	if ! [ -d "$mountpoint$2/" ]
	then
		echo "'$2' does not exist."
		return
	fi

	if ! ( find -L "$mountpoint$2/" -name '*.deb' -print \
	        | head -n 1 ) 2>/dev/null  | grep . >/dev/null
	then
		echo "'$2' does not contain any *.deb packages.  Hmmpf."
		return
	fi
	echo "Using '$2' as $1 binary dir."
	this_binary="$2"
}

find_area () {
	# args: area-in-messages area-in-vars subdirectory-in-hier
	#       last-time-binary last-time-packages
	# eg:   main             main         main
	#       "$p_main_binary" "$p_main_packages"

	this_binary=''
	this_packages=''
	if [ -n "$hierbase" ]
	then
		check_binary $1 "$hierbase/$3/binary-$iarch"
	fi

	if [ $2 = lcl ] && [ -z "$this_binary" ]
	then
		echo "
Note: By default there is no 'local' directory. It is intended for
packages you made yourself."
	fi
	while [ -z "$this_binary" ]
	do
		defaultbinary="$4"
		echo "
Which directory contains the *.deb packages from the $1 distribution
area (this directory is named '$3/binary-$iarch' on the distribution site) ?
Say 'none' if this area is not available."
		if [ $2 != main ] && [ -z "$defaultbinary" ]
		then
			defaultbinary=none
		fi
		echo -n \
"Enter _$1_ binary dir. [$4]
 ?  "
		read response
		if [ -z "$response" ] && [ -n "$defaultbinary" ]
		then
			response="$defaultbinary"
		fi
		if [ none = "$response" ]
		then
			break
		fi
		case "$response" in
		'' | none)	continue		;;
		esac
		check_binary $1 "`echo \"$response\" | sed -e 's:/$::; s:^/*:/:'`"
	done
	if [ -n "$this_binary" ]
	then
		for f in Packages.gz packages.gz Packages packages
		do
			if [ -f "$mountpoint/$this_binary/$f" ]
			then
				echo "Using '$this_binary/$f' for $1."
				this_packages="$this_binary/$f"
				break
			fi
		done
		while [ -z "$this_packages" ]
		do
			echo -n "
Cannot find the $1 'Packages' file. The information in the
'Packages' file is important for package selection during new
installations, and is very useful for upgrades.

If you overlooked it when downloading you should do get it now and
return to this installation procedure when you have done so: you will
find one Packages file and one Packages.gz file -- either will do --
in the 'binary-$iarch' subdirectory of each area on the FTP sites and
CD-ROMs. Alternatively (and this will be rather slow) the packages in
the distribution area can be scanned - say 'scan' if you want to do so.

You need a separate Packages file from each of the distribution areas
you wish to install.

Where is the _$1_ 'Packages' file (if none is available, say 'none')
[$5]
 ?  "
			read response
			if [ -z "$response" ] && [ -n "$5" ]
			then
				response="$5"
			fi
			case "$response" in
			'')		continue			;;
			none)		break				;;
			scan)		this_packages=scan		;;
			/*)		this_packages="$response"	;;
			*)		this_packages="/$response"	;;
			esac
		done
	fi
	eval $2'_binary="$this_binary"'
	eval $2'_packages="$this_packages"'
}

find_area main main main "$p_main_binary" "$p_main_packages"
find_area contrib ctb contrib "$p_ctb_binary" "$p_ctb_packages"
find_area non-free nf non-free "$p_nf_binary" "$p_nf_packages"
find_area local lcl local "$p_lcl_binary" "$p_lcl_packages"

echo -n '
Hit RETURN to continue.  '
read response

exec 3>shvar.$option.new

outputparam p_blockdev "$blockdevice"
outputparam p_fstype "$fstype"
outputparam p_mountpoint "$mountpoint"
outputparam p_hierbase "$hierbase"

outputparam p_main_packages "$main_packages"
outputparam p_main_binary "$main_binary"
outputparam p_ctb_packages "$ctb_packages"
outputparam p_ctb_binary "$ctb_binary"
outputparam p_nf_packages "$nf_packages"
outputparam p_nf_binary "$nf_binary"
outputparam p_lcl_packages "$lcl_packages"
outputparam p_lcl_binary "$lcl_binary"

mv shvar.$option.new shvar.$option

xit=0
