1.0.3:
  * Clean up documentation files.
  * Update documentation on installation.
  * Update Swedish and French translations.
  * Add Norwegtian Nynorsk and Danish translations.

1.0.3rc2:
  * Fix bug handling DJ pairing notifications.
  * Add Norwegian Bokmål translation.

1.0.3rc1:
  * Remove deprecated solaar-cli application.
  * Don't install udev or autostart files from python (or pip).
  * Solaar needs Python 3.6+ and probably needs kernel 5.2+
  * Handle exceptions on dynamic settings when device is not connected.
  * Fix inifinite loop on some low-level write errors
  * Add support for EX100 keyboard/mouse and receiver (046d:c517)
  * Add two settings for THUMB_WHEEL feature - inversion and reporting via HID++
  * Update German translation
  * Use REPORT RATE feature when available to determine polling rate.
  * Improve config command speed when not printing all settings
  * Improve config command handling and checking of arguments
  * Add setting for CHANGE_HOST feature
  * Add argument to settings for values that are not to persist
  * Add argument to settings to not wait for reply when writing a value to device
  * Add argument to not wait for reply from request to device
  * Add settings for MULTIPLATFORM and DUALPLATFORM features
  * Remove Logitech documents from documentation directory
  * Change config command to not read all settings when only printing or showing one
  * Display hosts info in 'solaar show' if device supports it
  * Remove non-working smooth-scrool from M510 v1
  * Add yapf and flake8 code style checks
  * Fix feature k375s Fn inversion
  * Update controls (keys and buttons) and tasks (actions)
  * Improved way to specify feature settings.
  * Don't abort on device notifications with unexpected device numbers, just warn.
  * Keep track of non-features so as not to ask device multiple times.
  * Implement KEYBOARD DISABLE KEYS feature.
  * Don't create notifications for DJ device activity reports.
  * Update a few special keys and actions.
  * Add keyed choice settings in configuration panel.
  * Support remappable keys from reprogrammable keys v4 feature.
  * Add setting class for keyed choice.
  * Only check for features once per device.
  * Use settings interface to show feature values in `solaar show` if no special code for feature.
  * Remove maximum window size.
  * Process battery voltage notifications.
  * Display battery voltage information in main window if regular battery information not available.
  * Show next battery level where available.
  * Update list of implemented features and provide information on how to implement features.
  * Add c53d as a Lightspeed receiver.

1.0.2:
  * Add usage document

1.0.2rc3:
  * Don't produce error dialog for inaccessible receivers with access control lists.
  * Add option --battery-icons=symbolic to use symbolic icons if available.
  * Update French translation
  * Update installation documentation

1.0.2rc2:
  * Remove packaging directory tree as it is not maintained
  * Pip installs udev rule and solaar autostart when doing install without --user flag
  * Use Solaar icon instead of a missing battery icon
  * Use only standard icons for battery levels.  Symbolic icons do not change to white in dark themes because of problems external to Solaar.
  * Better reporting of battery levels when charging for some devices.
  * Add information on K600 TV, M350 WIPD 4080, and MX Keys
  * Remove assertion requiring receivers to still be in window when they are updated.
  * Augment long description of Solaar showing up in repositories.
  * Update installation directions.
  * Install udev rule as well as autostart file when doing system install.
  * Add support for Ayatana AppIndicator.
  * Use setuptools icon directory on system installs when not using pip.
  * Add receiver C517 and several older devices.
  * Improved translations for polish.
  * Bypass bug in appindicator when solaar is file in current directory.
  * Don't check that device kind matches feature kind.
  * Better determination of icons for battery levels.
  * Use Ayatana AppIndicator if available.
  * Improve error reporting when required system packages are not install.
  * Better tooltip description
  * Add release script to help when creating releases

1.0.2-rc1:
  * Look up tray icon filenames to get around a bug in libappindicator.
  * Make the default behavior be to show the main window at startup.
  * Support c537 nano receiver
  * Add logind signals for suspend/resume.
  * Remove solaar-gnome3 package
  * Ignore features for devices that don't follow feature specification
  * Add probe command to command-line interface to dump receiver registers
  * Don't terminate on malformed or unknown messages
  * Create fewer internal notifications for messages from devices
  * Add a button to the main window to terminate (quit) Solaar
  * Set up nano receivers as receivers with no unpairing and with re-pairing
  * Set up c534 as receiver with max 2 pairings, no unpairing, re-pairing
  * Better support receivers that do not unpair or when pairing replace existing pairings
  * Add information about receiver pairing to receiver data structure
  * Better support devices that only allow a limited number of total re-pairings
  * Add --window option to control main window visibility and tray usage
  * Ignore receiver if USB id is not retrieved
  * Fix bug with double deleting when devices are disconnected
  * Determine some receiver information from data structure for USB ids
  * Treat battery level of 0 as unknown
  * Fix bug on devices with no serial number
  * Drop support for python2, and use python3 throughout
  * Fix bug in remembering features discovered from device reports
  * Show icons in main window device list
  * Count offline devices when determining whether pairing is possible
  * Update French, Dutch, German, and Croation translations
  * Better icons for battery levels
  * Support DPI, Backlight 2, Battery Voltage features
  * Support M585, M590, M330, MX Master 2s and 3, new M310, new K800, craft keyboard
  * Documentation improvements
  * Clean up directory structure and remove unused files

1.0.1:
  * Updated the repo url.
  * Fixed typo which was crashing the application.
  * Improved the HID write routine which was causing issues on some devices.
  * Fix non-unifying receivers in Linux 5.2.
  * Add new Lightspeed receiver (used in the G305)

1.0.0:
  * Too many to track...

0.9.3:
  * Merged solaar-cli functionality into main solaar.
  * Scrolling over the systray icon switches between multiple peripherals.
  * Swedish translation courtesy of Daniel Zippert and Emelie Snecker
  * French translation courtesy of Papoteur, David Geiger and Damien Lallement.
  * Fixed some untranslated strings.

0.9.2:
  * Added support for hand detection on the K800.
  * Added support for V550 and V450 Nano.
  * Fixed side-scrolling with the M705 Marathon.
  * Fixed identification of the T650 Touchpad.
  * Added internationalization support and romanian translation.
  * Polish translation courtesy of Adrian Piotrowicz.

0.9.1:
  * When devices report a battery alert, only show the alert once.
  * Make sure devices in the window tree are sorted by registration index.
  * Added an autostart .desktop file.
  * Replaced single-instance code with GtkApplication.
  * Fixed identification of the M505 mouse.
  * Fixed an occasional windowing layout bug with the C52F Nano Receiver.

0.9.0:
  * New single-window UI.
  * Performance MX leds show the current battery charge.
  * Support the VX Nano mouse.
  * Faster and more accurate detection of devices.
  * If upower is accessible through DBus, handle suspend/resume.
  * Replaced Solaar icons with SVGs.
  * Running solaar-cli in parallel with solaar is now less likely to cause issues.
  * Bugfixes to saving and applying device settings.
  * Properly handle ^C when running in console.

0.8.9:

  * Improved support for gnome-shell/Unity.
  * Persist devices settings between runs.
  * Fixed reading of MK700 keyboard battery status.
  * Use battery icons from the current theme instead of custom ones.
  * Debian/Ubuntu packages now depend on an icon theme, to make sure
    no missing icons appear in the application window.
  * Fixed missing icons under Kubuntu.
  * Many more bug-fixes and reliability improvements.

0.8.8:

  * Partial support for some Nano receivers.
  * Improved support for some devices: M510, K800, Performance MX.
  * Improved battery support for some HID++ 1.0 devices.
  * Properly handle device loss on computer sleep/wake.
  * Better handling of receiver adding and removal at runtime.
  * Removed a few more unhelpful notifications.
  * Incipient support for multiple connected receivers.
  * More Python 3 fixes.

0.8.7:

  * Don't show the "device disconnected" notification, it can be annoying and
    not very useful.
  * More robust detection of systray icon visibility.

0.8.6:

  * Ensure the Gtk application is single-instance.
  * Fix identifying available dpi values.
  * Fixed locating application icons when installed in a custom prefix.
  * Fixed some icon names for the oxygen theme.
  * Python 3 fixes.
