IRKERHOOK(1)

NAME
irkerhook - repository hook script issuing irker notifications

SYNOPSIS

irkerhook.py [-n] [-V] [[--variable=value...]] [[commit-id...]]

DESCRIPTION

irkerhook.py is a Python script intended to be called from the post-commit hook of a version-control repository. Its job is to collect information about the commit that fired the hook (and possibly preferences set by the repository owner) and ship that information to an instance of irkerd for forwarding to various announcement channels.

The proper invocation and behavior of irkerhook.py varies depending on which VCS (version-control system) is calling it. There are four different places from which it may extract information:

    1. Calls to VCS utilities.

    2. In VCSes like git that support user-settable configuration variables, variables with the prefix "irker.".

    3. In other VCSes, a configuration file, "irker.conf", in the repository's internals directory.

    4. Command-line arguments of the form --variable=value.

The following variables are general to all supported VCSes:

project
    The name of the project. Should be a relatively short identifier; will usually appear at the very beginning of a notification.

repo
    The name of the repository top-level directory. If not specified, defaults to a lowercased copy of the project name.

channels
    An IRC channel URL, or comma-separated list of same, identifying channels to which notifications are to be sent. If not specified, the default is the freenode #commits channel.

server
    The host on which the notification-relaying irker daemon is expected to reside. Defaults to "localhost".

email
    If set, use email for communication rather than TCP or UDP. The value is used as the target mail address.

tcp
    If "true", use TCP for communication; if "false", use UDP. Defaults to "false".

urlprefix
    Changeset URL prefix for your repo. When the commit ID is appended to this, it should point at a CGI that will display the commit through cgit, gitweb or something similar. The defaults will probably work if you have a typical gitweb/cgit setup.

    If the value of this variable is "None", generation of the URL field in commit notifications will be suppressed. Other magic values are "cgit", "gitweb", and "viewcvs", which expand to URL templates that will usually work with those systems.

    The magic cookies "%(host)s" and %(repo)s" may occur in this URL. The former is expanded to the FQDN of the host on which irkerhook.py is running; the latter is expanded to the value of the "repo" variable.

tinyifier
    URL template pointing to a service for compressing URLs so they will take up less space in the notification line. If the value of this variable is "None", no compression will be attempted.

color
    If "mIRC", highlight notification fields with mIRC color codes. If "ANSI", highlight notification fields with ANSI color escape sequences. Defaults to "none" (no colors). ANSI codes are supported in Chatzilla, irssi, ircle, and BitchX; mIRC codes only are recognized in mIRC, XChat, KVirc, Konversation, or weechat.

    Note: if you turn this on and notifications stop appearing on your channel, you need to turn off IRC's color filter on that channel. To do this you will need op privileges; issue the command "/mode <channel> -c" with <channel> replaced by your channel name. You may need to first issue the command "/msg chanserv set <channel> MLOCK +nt-slk".

maxchannels
    Interpreted as an integer. If not zero, limits the number of channels the hook will interpret from the "channels" variable.

    This variable cannot be set through VCS configuration variables or irker.conf; it can only be set with a command-line argument. Thus, on a forge site in which repository owners are not allowed to modify their post-commit scripts, a site administrator can set it to prevent shotgun spamming by malicious project owners. Setting it to a value less than 2, however, would probably be unwise.

cialike
    If not empty and not "None" (the default), this emulates the old CIA behavior of dropping long lists of files in favor of a summary of the form (N files in M directories). The value must be numeric giving a threshold value for the length of the file list in characters.

template
    Set the template used to generate notification messages. Only available in VCses with config variables; presently this means git or hg. All basic commit and extractor fields, including color switches, are available as %() substitutions.

irkerhook.py will run under both python 2 and python 3, but it does not support mercurial repositories under python 3 yet.

  git

Under git, the normal way to invoke this hook (from within the update hook) passes it a refname followed by a list of commits. Because git rev-list normally lists from most recent to oldest, you'll want to use --reverse to make notifications be omitted in chronological order. In a normal update script, the invocation should look like this

    refname=$1
    old=$2
    new=$3
    irkerhook.py --refname=${refname} $(git rev-list --reverse ${old}..${new})

except that you'll need an absolute path for irkerhook.py.

For testing purposes and backward compatibility, if you invoke irkerhook.py with no arguments (as in a post-commit hook) it will behave as though it had been called like this:

    irkerhook.py --refname=refs/heads/master HEAD

However, this will not give the right result when you push to a non-default branch of a bare repo.

A typical way to install this hook is actually in the post-receive hook, because it gets all the necessary details and will not abort the push on failure. Use the following script:

    #!/bin/sh
    echo "sending IRC notification"
    while read old new refname; do
        irkerhook --refname=${refname} $(git rev-list --reverse ${old}..${new})
    done

Preferences may be set in the repo config file in an [irker] section. Here is an example of what that can look like:

    [irker]
        project = gpsd
        color = ANSI
        channels = irc://chat.freenode.net/gpsd,irc://chat.freenode.net/commits

You should not set the "repository" variable (an equivalent will be computed). No attempt is made to interpret an irker.conf file.

The default value of the "project" variable is the basename of the repository directory. The default value of the "urlprefix" variable is "cgit".

There is one git-specific variable, "revformat", controlling the format of the commit identifier in a notification. It may have the following values:

raw
    full hex ID of commit

short
    first 12 chars of hex ID

describe
    describe relative to last tag, falling back to short

The default is 'describe'.

  Subversion

Under Subversion, irkerhook.py accepts a --repository option with value (the absolute pathname of the Subversion repository) and a commit argument (the numeric revision level of the commit). The defaults are the current working directory and HEAD, respectively.

Note, however, that you cannot default the repository argument inside a Subversion post-commit hook; this is because of a limitation of Subversion, which is that getting the current directory is not reliable inside these hooks. Instead, the values must be the two arguments that Subversion passes to that hook as arguments. Thus, a typical invocation in the post-commit script will look like this:

    REPO=$1
    REV=$2
    irkerhook.py --repository=$REPO $REV

Other --variable=value settings may also be given on the command line, and will override any settings in an irker.conf file.

The default for the project variable is the basename of the repository. The default value of the "urlprefix" variable is "viewcvs".

If an irker.conf file exists in the repository root directory (not the checkout directory but where internals such as the "format" file live) the hook will interpret variable settings from it. Here is an example of what such a file might look like:

    # irkerhook variable settings for the irker project
    project = irker
    channels  = irc://chat.freenode/irker,irc://chat.freenode/commits
    tcp = false

Don't set the "repository" or "commit" variables in this file; that would have unhappy results.

There are no Subversion-specific variables.

  Mercurial

Under Mercurial, irkerhook.py can be invoked in two ways: either as a Python hook (preferred) or as a script.

To call it as a Python hook, add the collowing to the "commit" or "incoming" hook declaration in your Mercurial repository:

    [hooks]
    	incoming.irker = python:/path/to/irkerhook.py:hg_hook

When called as a script, the hook accepts a --repository option with value (the absolute pathname of the Mercurial repository) and can take a commit argument (the Mercurial hash ID of the commit or a reference to it). The default for the repository argument is the current directory. The default commit argument is '-1', designating the current tip commit.

As for git, in both cases all variables may be set in the repo hgrc file in an [irker] section. Command-line variable=value arguments are accepted but not required for script invocation. No attempt is made to interpret an irker.conf file.

The default value of the "project" variable is the basename of the repository directory. The default value of the "urlprefix" variable is the value of the "web.baseurl" config value, if it exists.

  Filtering

It is possible to filter commits before sending them to irkerd.

You have to specify the filtercmd option, which will be the command irkerhook.py will run. This command should accept one arguments, which is a JSON representation of commit and extractor metadata (including the channels variable). The command should emit to standard output a JSON representation of (possibly altered) metadata.

Below is an example filter:

    #!/usr/bin/env python
    # This is a trivial example of a metadata filter.
    # All it does is change the name of the commit's author.
    #
    import sys, json
    metadata = json.loads(sys.argv[1])
    metadata['author'] = "The Great and Powerful Oz"
    print json.dumps(metadata)
    # end

Standard error is available to the hook for progress and error messages.

OPTIONS

irkerhook.py takes the following options:

-n
    Suppress transmission to a daemon. Instead, dump the generated JSON request to standard output. Useful for debugging.

-V
    Write the program version to stdout and terminate.

SEE ALSO

irkerd(8),

AUTHOR

Eric S. Raymond <esr@snark.thyrsus.com>. See the project page at http://www.catb.org/~esr/irker for updates and other resources.