keychain(1)

NAME
keychain - re-use ssh-agent and/or gpg-agent between logins

SYNOPSIS
keychain [ -hklQqV ] [ --clear --confhost --gpg2 --help --ignore-missing --list --noask --nocolor --nogui --nolock --quick --quiet --version ] [ --agents list ] [ --attempts num ] [ --dir dirname ] [ --host name ] [ --lockwait seconds ] [ --stop which ] [ --timeout minutes ] [ keys... ]

DESCRIPTION
keychain is a manager for ssh-agent, typically run from ~/.bash_profile. It allows your shells and cron jobs to easily share a single ssh-agent process. By default, the ssh-agent started by keychain is long-running and will continue to run, even after you have logged out from the system. If you want to change this behavior, take a look at the --clear and --timeout options, described below.

When keychain is run, it checks for a running ssh-agent, otherwise it starts one. It saves the ssh-agent environment variables to ~/.keychain/${HOSTNAME}-sh, so that subsequent logins and non-interactive shells such as cron jobs can source the file and make passwordless ssh connections.

In addition, when keychain runs, it verifies that the key files specified on the command-line are known to ssh-agent, otherwise it loads them, prompting you for a password if necessary. Typically, private key files are specified by filename only, without path, although it is possible to specify an absolute or relative path to the private key file as well. If just a private key filename is used, which is typical usage, keychain will look for the specified private key files in ~/.ssh, ~/.ssh2, or with the -c/--confhost option, inspect the ~/.ssh/config file and use the IdentityFile option to determine the location of the private key. Private keys can be symlinks to the actual private key.

Keychain expects associated public key files to exist in the same directory as the private key files, with a .pub extension. If the private key is a symlink, the public key can be found alongside the symlink, or in the same directory as the symlink target (This capability requires the 'readlink' command to be available on the system.)

As an additional feature, if a private key has an extension ".ext", keychain will look for privkey.ext.pub first, and if not found, will look for privkeyname.pub.

Keychain also supports gpg-agent in the same ways that ssh-agent is supported. By default keychain attempts to start ssh-agent only. You can modify this behavior using the --agents option.

Keychain supports most UNIX-like operating systems, including Cygwin. It works with Bourne-compatible, csh-compatible and fish shells.

OPTIONS

--agents list
    Start the agents listed. By default keychain will start ssh-agent if it is found in your path. The list should be comma-separated, for example "gpg,ssh"

--attempts num
    Try num times to add keys before giving up. The default is 1.

--clear
    Delete all of ssh-agent's keys. Typically this is used in .bash_profile. The theory behind this is that keychain should assume that you are an intruder until proven otherwise. However, while this option increases security, it still allows your cron jobs to use your ssh keys when you're logged out.

--confhost
    By default, keychain will look for key pairs in the ~/.ssh/ directory. The --confhost option will inform keychain to look in ~/.ssh/config for IdentityFile settings defined for particular hosts, and use these paths to locate keys.

--confirm
    Keys are subject to interactive confirmation by the SSH_ASKPASS program before being used for authentication. See the -c option for ssh-add(1).

--absolute
    Any arguments to "--dir" are interpreted to be absolute. The default behavior is to append "/.keychain" to the argument for backwards compatibility.

--dir dirname
    Keychain will use dirname rather than $HOME/.keychain

--query
    Keychain will print lines in KEY=value format representing the values which are set by the agents.

--eval
    Keychain will print lines to be evaluated in the shell on stdout. It respects the SHELL environment variable to determine if Bourne shell or C shell output is expected.

--env filename
    After parsing options, keychain will load additional environment settings from "filename". By default, if "--env" is not given, then keychain will attempt to load from ~/.keychain/[hostname]-env or alternatively ~/.keychain/env. The purpose of this file is to override settings such as PATH, in case ssh is stored in a non-standard place.

--gpg2
    This option changes the default gpg calls to use gpg2 instead to support distributions such as Ubuntu which has both gpg and gpg2

-h --help
    Show help that looks remarkably like this man-page. As of 2.6.10, help is sent to stdout so it can be easily piped to a pager.

--host name
    Set alternate hostname for creation of pidfiles

--ignore-missing
    Don't warn if some keys on the command-line can't be found. This is useful for situations where you have a shared .bash_profile, but your keys might not be available on every machine where keychain is run.

--inherit which
    Attempt to inherit agent variables from the environment. This can be useful in a variety of circumstances, for example when ssh-agent is started by gdm. The following values are valid for "which":

    local
        Inherit when a pid (e.g. SSH_AGENT_PID) is set in the environment. This disallows inheriting a forwarded agent.

    any Inherit when a sock (e.g. SSH_AUTH_SOCK) is set in the environment. This allows inheriting a forwarded agent.

    local-once
        Same as "local", but only inherit if keychain isn't already providing an agent.

    any-once
        Same as "any", but only inherit if keychain isn't already providing an agent.

    By default, keychain-2.5.0 and later will behave as if "--inherit local-once" is specified. You should specify "--noinherit" if you want the older behavior.

-l --list
    List signatures of all active SSH keys, and exit, similar to "ssh-add -l".

-L --list-fp
    List fingerprints of all active SSH keys, and exit, similar to "ssh-add -L".

--lockwait seconds
    How long to wait for the lock to become available. Defaults to 5 seconds. Specify a value of zero or more. If the lock cannot be acquired within the specified number of seconds, then this keychain process will forcefully acquire the lock.

--noask
    This option tells keychain do everything it normally does (ensure ssh-agent is running, set up the ~/.keychain/[hostname]-{c}sh files) except that it will not prompt you to add any of the keys you specified if they haven't yet been added to ssh-agent.

--nocolor
    Disable color highlighting for non ANSI-compatible terms.

--nogui
    Don't honor SSH_ASKPASS, if it is set. This will cause ssh-add to prompt on the terminal instead of using a graphical program.

--noinherit
    Don't inherit any agent processes, overriding the default "--inherit local-once"

--nolock
    Don't attempt to use a lockfile while manipulating files, pids and keys.

-k --stop which
    Kill currently running agent processes. The following values are valid for "which":

    all Kill all agent processes and quit keychain immediately. Prior to keychain-2.5.0, this was the behavior of the bare "--stop" option.

    others
        Kill agent processes other than the one keychain is providing. Prior to keychain-2.5.0, keychain would do this automatically. The new behavior requires that you specify it explicitly if you want it.

    mine
        Kill keychain's agent processes, leaving other agents alone.

--systemd
    Inject environment variables into the systemd --user session.

-Q --quick
    If an ssh-agent process is running then use it. Don't verify the list of keys, other than making sure it's non-empty. This option avoids locking when possible so that multiple terminals can be opened simultaneously without waiting on each other.

-q --quiet
    Only print messages in case of warning, error or required interactivity. As of version 2.6.10, this also suppresses "Identities added" messages for ssh-agent.

--timeout minutes
    Allows a timeout to be set for identities added to ssh-agent. When this option is used with a keychain invocation that starts ssh-agent itself, then keychain uses the appropriate ssh-agent option to set the default timeout for ssh-agent. The --timeout option also gets passed to ssh-add invocations, so any keys added to a running ssh-agent will be individually configured to have the timeout specified, overriding any ssh-agent default.

    Most users can simply use the timeout setting they desire and get the result they want -- with all identities having the specified timeout, whether added by keychain or not. More advanced users can use one invocation of keychain to set the default timeout, and optionally set different timeouts for keys added by using a subsequent invocation of keychain.

-V --version
    Show version information.

EXAMPLES
This snippet should work in most shells to load two ssh keys and one gpg key:

    eval `keychain --eval id_rsa id_dsa 0123ABCD`

For the fish shell, use the following format:

    if status --is-interactive
        keychain --eval --quiet -Q id_rsa | source
    end

If you have trouble with that in csh:

    setenv SHELL /bin/csh
    eval `keychain --eval id_rsa id_dsa 0123ABCD`

This is equivalent for Bourne shells (including bash and zsh) but doesn't use keychain's --eval feature:

    keychain id_rsa id_dsa 0123ABCD
    [ -z "$HOSTNAME" ] && HOSTNAME=`uname -n`
    [ -f $HOME/.keychain/$HOSTNAME-sh ] && \
            . $HOME/.keychain/$HOSTNAME-sh
    [ -f $HOME/.keychain/$HOSTNAME-sh-gpg ] && \
            . $HOME/.keychain/$HOSTNAME-sh-gpg

This is equivalent for C shell (including tcsh):

    keychain id_rsa id_dsa 0123ABCD
    host=`uname -n`
    if (-f $HOME/.keychain/$host-csh) then
            source $HOME/.keychain/$host-csh
    endif
    if (-f $HOME/.keychain/$host-csh-gpg) then
            source $HOME/.keychain/$host-csh-gpg
    endif

To load keychain variables from a script (for example from cron) and abort unless id_dsa is available:

    # Load keychain variables and check for id_dsa
    [ -z "$HOSTNAME" ] && HOSTNAME=`uname -n`
    . $HOME/.keychain/$HOSTNAME-sh 2>/dev/null
    ssh-add -l 2>/dev/null | grep -q id_dsa || exit 1

SEE ALSO
ssh-agent(1)

NOTES
Keychain was created and is currently maintained by Daniel Robbins. If you need to report a bug or request an enhancement, please post to the Funtoo Linux bug tracker <http://bugs.funtoo.org>. For more information about keychain, please visit <http://www.funtoo.org/Keychain>.