#
# Multimedia Video device configuration
#

if BACKPORT_VIDEO_V4L2

config BACKPORT_VIDEO_IR_I2C
	tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT
	depends on !VIDEO_IR_I2C
	depends on I2C && BACKPORT_RC_CORE
	default y
	---help---
	  Most boards have an IR chip directly connected via GPIO. However,
	  some video boards have the IR connected via I2C bus.

	  If your board doesn't have an I2C IR chip, you may disable this
	  option.

	  In doubt, say Y.

#
# Encoder / Decoder module configuration
#

menu "Encoders, decoders, sensors and other helper chips"
	visible if !MEDIA_SUBDRV_AUTOSELECT

comment "Audio decoders, processors and mixers"

config BACKPORT_VIDEO_TVAUDIO
	tristate "Simple audio decoder chips"
	depends on !VIDEO_TVAUDIO
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for several audio decoder chips found on some bt8xx boards:
	  Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
		   tea6320, tea6420, tda8425, ta8874z.
	  Microchip: pic16c54 based design on ProVideo PV951 board.

	  To compile this driver as a module, choose M here: the
	  module will be called tvaudio.

config BACKPORT_VIDEO_TDA7432
	tristate "Philips TDA7432 audio processor"
	depends on !VIDEO_TDA7432
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for tda7432 audio decoder chip found on some bt8xx boards.

	  To compile this driver as a module, choose M here: the
	  module will be called tda7432.

config BACKPORT_VIDEO_TDA9840
	tristate "Philips TDA9840 audio processor"
	depends on !VIDEO_TDA9840
	depends on I2C
	---help---
	  Support for tda9840 audio decoder chip found on some Zoran boards.

	  To compile this driver as a module, choose M here: the
	  module will be called tda9840.

config BACKPORT_VIDEO_TEA6415C
	tristate "Philips TEA6415C audio processor"
	depends on !VIDEO_TEA6415C
	depends on I2C
	---help---
	  Support for tea6415c audio decoder chip found on some bt8xx boards.

	  To compile this driver as a module, choose M here: the
	  module will be called tea6415c.

config BACKPORT_VIDEO_TEA6420
	tristate "Philips TEA6420 audio processor"
	depends on !VIDEO_TEA6420
	depends on I2C
	---help---
	  Support for tea6420 audio decoder chip found on some bt8xx boards.

	  To compile this driver as a module, choose M here: the
	  module will be called tea6420.

config BACKPORT_VIDEO_MSP3400
	tristate "Micronas MSP34xx audio decoders"
	depends on !VIDEO_MSP3400
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Micronas MSP34xx series of audio decoders.

	  To compile this driver as a module, choose M here: the
	  module will be called msp3400.

config BACKPORT_VIDEO_CS5345
	tristate "Cirrus Logic CS5345 audio ADC"
	depends on !VIDEO_CS5345
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Cirrus Logic CS5345 24-bit, 192 kHz
	  stereo A/D converter.

	  To compile this driver as a module, choose M here: the
	  module will be called cs5345.

config BACKPORT_VIDEO_CS53L32A
	tristate "Cirrus Logic CS53L32A audio ADC"
	depends on !VIDEO_CS53L32A
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Cirrus Logic CS53L32A low voltage
	  stereo A/D converter.

	  To compile this driver as a module, choose M here: the
	  module will be called cs53l32a.

config BACKPORT_VIDEO_TLV320AIC23B
	tristate "Texas Instruments TLV320AIC23B audio codec"
	depends on !VIDEO_TLV320AIC23B
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Texas Instruments TLV320AIC23B audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called tlv320aic23b.

config BACKPORT_VIDEO_UDA1342
	tristate "Philips UDA1342 audio codec"
	depends on !VIDEO_UDA1342
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Philips UDA1342 audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called uda1342.

config BACKPORT_VIDEO_WM8775
	tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
	depends on !VIDEO_WM8775
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Wolfson Microelectronics WM8775 high
	  performance stereo A/D Converter with a 4 channel input mixer.

	  To compile this driver as a module, choose M here: the
	  module will be called wm8775.

config BACKPORT_VIDEO_WM8739
	tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
	depends on !VIDEO_WM8739
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Wolfson Microelectronics WM8739
	  stereo A/D Converter.

	  To compile this driver as a module, choose M here: the
	  module will be called wm8739.

config BACKPORT_VIDEO_VP27SMPX
	tristate "Panasonic VP27's internal MPX"
	depends on !VIDEO_VP27SMPX
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the internal MPX of the Panasonic VP27s tuner.

	  To compile this driver as a module, choose M here: the
	  module will be called vp27smpx.

config BACKPORT_VIDEO_SONY_BTF_MPX
	tristate "Sony BTF's internal MPX"
	depends on !VIDEO_SONY_BTF_MPX
	depends on BACKPORT_VIDEO_V4L2 && I2C
	help
	  Support for the internal MPX of the Sony BACKPORT_BTF-PG472Z tuner.

	  To compile this driver as a module, choose M here: the
	  module will be called sony-btf-mpx.

comment "RDS decoders"

config BACKPORT_VIDEO_SAA6588
	tristate "SAA6588 Radio Chip RDS decoder support"
	depends on !VIDEO_SAA6588
	depends on BACKPORT_VIDEO_V4L2 && I2C

	help
	  Support for this Radio Data System (RDS) decoder. This allows
	  seeing radio station identification transmitted using this
	  standard.

	  To compile this driver as a module, choose M here: the
	  module will be called saa6588.

comment "Video decoders"

config BACKPORT_VIDEO_ADV7180
	tristate "Analog Devices ADV7180 decoder"
	depends on !VIDEO_ADV7180
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Analog Devices ADV7180 video decoder.

	  To compile this driver as a module, choose M here: the
	  module will be called adv7180.

config BACKPORT_VIDEO_ADV7183
	tristate "Analog Devices ADV7183 decoder"
	depends on !VIDEO_ADV7183
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  V4l2 subdevice driver for the Analog Devices
	  ADV7183 video decoder.

	  To compile this driver as a module, choose M here: the
	  module will be called adv7183.

config BACKPORT_VIDEO_ADV7604
	tristate "Analog Devices ADV7604 decoder"
	depends on !VIDEO_ADV7604
	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && BACKPORT_MEDIA_CONTROLLER
	---help---
	  Support for the Analog Devices ADV7604 video decoder.

	  This is a Analog Devices Component/Graphics Digitizer
	  with 4:1 Multiplexed HDMI Receiver.

	  To compile this driver as a module, choose M here: the
	  module will be called adv7604.

config BACKPORT_VIDEO_ADV7842
	tristate "Analog Devices ADV7842 decoder"
	depends on !VIDEO_ADV7842
	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && BACKPORT_MEDIA_CONTROLLER
	---help---
	  Support for the Analog Devices ADV7842 video decoder.

	  This is a Analog Devices Component/Graphics/SD Digitizer
	  with 2:1 Multiplexed HDMI Receiver.

	  To compile this driver as a module, choose M here: the
	  module will be called adv7842.

config BACKPORT_VIDEO_BT819
	tristate "BT819A VideoStream decoder"
	depends on !VIDEO_BT819
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for BACKPORT_BT819A video decoder.

	  To compile this driver as a module, choose M here: the
	  module will be called bt819.

config BACKPORT_VIDEO_BT856
	tristate "BT856 VideoStream decoder"
	depends on !VIDEO_BT856
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for BACKPORT_BT856 video decoder.

	  To compile this driver as a module, choose M here: the
	  module will be called bt856.

config BACKPORT_VIDEO_BT866
	tristate "BT866 VideoStream decoder"
	depends on !VIDEO_BT866
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for BACKPORT_BT866 video decoder.

	  To compile this driver as a module, choose M here: the
	  module will be called bt866.

config BACKPORT_VIDEO_KS0127
	tristate "KS0127 video decoder"
	depends on !VIDEO_KS0127
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for KS0127 video decoder.

	  This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
	  cards.

	  To compile this driver as a module, choose M here: the
	  module will be called ks0127.

config BACKPORT_VIDEO_ML86V7667
	tristate "OKI ML86V7667 video decoder"
	depends on !VIDEO_ML86V7667
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the OKI Semiconductor ML86V7667 video decoder.

	  To compile this driver as a module, choose M here: the
	  module will be called ml86v7667.

config BACKPORT_VIDEO_SAA7110
	tristate "Philips SAA7110 video decoder"
	depends on !VIDEO_SAA7110
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Philips SAA7110 video decoders.

	  To compile this driver as a module, choose M here: the
	  module will be called saa7110.

config BACKPORT_VIDEO_SAA711X
	tristate "Philips SAA7111/3/4/5 video decoders"
	depends on !VIDEO_SAA711X
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Philips SAA7111/3/4/5 video decoders.

	  To compile this driver as a module, choose M here: the
	  module will be called saa7115.

config BACKPORT_VIDEO_TVP514X
	tristate "Texas Instruments TVP514x video decoder"
	depends on !VIDEO_TVP514X
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
	  decoder. It is currently working with the TI OMAP3 camera
	  controller.

	  To compile this driver as a module, choose M here: the
	  module will be called tvp514x.

config BACKPORT_VIDEO_TVP5150
	tristate "Texas Instruments TVP5150 video decoder"
	depends on !VIDEO_TVP5150
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Texas Instruments TVP5150 video decoder.

	  To compile this driver as a module, choose M here: the
	  module will be called tvp5150.

config BACKPORT_VIDEO_TVP7002
	tristate "Texas Instruments TVP7002 video decoder"
	depends on !VIDEO_TVP7002
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Texas Instruments TVP7002 video decoder.

	  To compile this driver as a module, choose M here: the
	  module will be called tvp7002.

config BACKPORT_VIDEO_TW2804
	tristate "Techwell TW2804 multiple video decoder"
	depends on !VIDEO_TW2804
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Techwell tw2804 multiple video decoder.

	  To compile this driver as a module, choose M here: the
	  module will be called tw2804.

config BACKPORT_VIDEO_TW9903
	tristate "Techwell TW9903 video decoder"
	depends on !VIDEO_TW9903
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Techwell tw9903 multi-standard video decoder
	  with high quality down scaler.

	  To compile this driver as a module, choose M here: the
	  module will be called tw9903.

config BACKPORT_VIDEO_TW9906
	tristate "Techwell TW9906 video decoder"
	depends on !VIDEO_TW9906
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Techwell tw9906 enhanced multi-standard comb filter
	  video decoder with YCbCr input support.

	  To compile this driver as a module, choose M here: the
	  module will be called tw9906.

config BACKPORT_VIDEO_VPX3220
	tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
	depends on !VIDEO_VPX3220
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for VPX322x video decoders.

	  To compile this driver as a module, choose M here: the
	  module will be called vpx3220.

comment "Video and audio decoders"

config BACKPORT_VIDEO_SAA717X
	tristate "Philips SAA7171/3/4 audio/video decoders"
	depends on !VIDEO_SAA717X
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Philips SAA7171/3/4 audio/video decoders.

	  To compile this driver as a module, choose M here: the
	  module will be called saa717x.

source "$BACKPORT_DIR/drivers/media/i2c/cx25840/Kconfig"

comment "Video encoders"

config BACKPORT_VIDEO_SAA7127
	tristate "Philips SAA7127/9 digital video encoders"
	depends on !VIDEO_SAA7127
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Philips SAA7127/9 digital video encoders.

	  To compile this driver as a module, choose M here: the
	  module will be called saa7127.

config BACKPORT_VIDEO_SAA7185
	tristate "Philips SAA7185 video encoder"
	depends on !VIDEO_SAA7185
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Philips SAA7185 video encoder.

	  To compile this driver as a module, choose M here: the
	  module will be called saa7185.

config BACKPORT_VIDEO_ADV7170
	tristate "Analog Devices ADV7170 video encoder"
	depends on !VIDEO_ADV7170
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Analog Devices ADV7170 video encoder driver

	  To compile this driver as a module, choose M here: the
	  module will be called adv7170.

config BACKPORT_VIDEO_ADV7175
	tristate "Analog Devices ADV7175 video encoder"
	depends on !VIDEO_ADV7175
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Analog Devices ADV7175 video encoder driver

	  To compile this driver as a module, choose M here: the
	  module will be called adv7175.

config BACKPORT_VIDEO_ADV7343
	tristate "ADV7343 video encoder"
	depends on !VIDEO_ADV7343
	depends on I2C
	help
	  Support for Analog Devices I2C bus based ADV7343 encoder.

	  To compile this driver as a module, choose M here: the
	  module will be called adv7343.

config BACKPORT_VIDEO_ADV7393
	tristate "ADV7393 video encoder"
	depends on !VIDEO_ADV7393
	depends on I2C
	help
	  Support for Analog Devices I2C bus based ADV7393 encoder.

	  To compile this driver as a module, choose M here: the
	  module will be called adv7393.

config BACKPORT_VIDEO_ADV7511
	tristate "Analog Devices ADV7511 encoder"
	depends on !VIDEO_ADV7511
	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && BACKPORT_MEDIA_CONTROLLER
	---help---
	  Support for the Analog Devices ADV7511 video encoder.

	  This is a Analog Devices HDMI transmitter.

	  To compile this driver as a module, choose M here: the
	  module will be called adv7511.

config BACKPORT_VIDEO_AD9389B
	tristate "Analog Devices AD9389B encoder"
	depends on !VIDEO_AD9389B
	depends on VIDEO_V4L2 && I2C && BACKPORT_VIDEO_V4L2_SUBDEV_API
	---help---
	  Support for the Analog Devices AD9389B video encoder.

	  This is a Analog Devices HDMI transmitter.

	  To compile this driver as a module, choose M here: the
	  module will be called ad9389b.

config BACKPORT_VIDEO_AK881X
	tristate "AK8813/AK8814 video encoders"
	depends on !VIDEO_AK881X
	depends on I2C
	help
	  Video output driver for AKM AK8813 and AK8814 TV encoders

config BACKPORT_VIDEO_THS8200
	tristate "Texas Instruments THS8200 video encoder"
	depends on !VIDEO_THS8200
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the Texas Instruments THS8200 video encoder.

	  To compile this driver as a module, choose M here: the
	  module will be called ths8200.

comment "Camera sensor devices"

config BACKPORT_VIDEO_APTINA_PLL
	tristate
	depends on !VIDEO_APTINA_PLL

config BACKPORT_VIDEO_SMIAPP_PLL
	tristate
	depends on !VIDEO_SMIAPP_PLL

config BACKPORT_VIDEO_OV7640
	tristate "OmniVision OV7640 sensor support"
	depends on !VIDEO_OV7640
	depends on I2C && BACKPORT_VIDEO_V4L2
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	---help---
	  This is a Video4Linux2 sensor-level driver for the OmniVision
	  OV7640 camera.

	  To compile this driver as a module, choose M here: the
	  module will be called ov7640.

config BACKPORT_VIDEO_OV7670
	tristate "OmniVision OV7670 sensor support"
	depends on !VIDEO_OV7670
	depends on I2C && BACKPORT_VIDEO_V4L2
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	---help---
	  This is a Video4Linux2 sensor-level driver for the OmniVision
	  OV7670 VGA camera.  It currently only works with the M88ALP01
	  controller.

config BACKPORT_VIDEO_OV9650
	tristate "OmniVision OV9650/OV9652 sensor support"
	depends on !VIDEO_OV9650
	depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	---help---
	  This is a V4L2 sensor-level driver for the Omnivision
	  OV9650 and OV9652 camera sensors.

config BACKPORT_VIDEO_VS6624
	tristate "ST VS6624 sensor support"
	depends on !VIDEO_VS6624
	depends on BACKPORT_VIDEO_V4L2 && I2C
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	---help---
	  This is a Video4Linux2 sensor-level driver for the ST VS6624
	  camera.

	  To compile this driver as a module, choose M here: the
	  module will be called vs6624.

config BACKPORT_VIDEO_MT9M032
	tristate "MT9M032 camera sensor support"
	depends on !VIDEO_MT9M032
	depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	select BACKPORT_VIDEO_APTINA_PLL
	---help---
	  This driver supports MT9M032 camera sensors from Aptina, monochrome
	  models only.

config BACKPORT_VIDEO_MT9P031
	tristate "Aptina MT9P031 support"
	depends on !VIDEO_MT9P031
	depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	select BACKPORT_VIDEO_APTINA_PLL
	---help---
	  This is a Video4Linux2 sensor-level driver for the Aptina
	  (Micron) mt9p031 5 Mpixel camera.

config BACKPORT_VIDEO_MT9T001
	tristate "Aptina MT9T001 support"
	depends on !VIDEO_MT9T001
	depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	---help---
	  This is a Video4Linux2 sensor-level driver for the Aptina
	  (Micron) mt0t001 3 Mpixel camera.

config BACKPORT_VIDEO_MT9V011
	tristate "Micron mt9v011 sensor support"
	depends on !VIDEO_MT9V011
	depends on I2C && BACKPORT_VIDEO_V4L2
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	---help---
	  This is a Video4Linux2 sensor-level driver for the Micron
	  mt0v011 1.3 Mpixel camera.  It currently only works with the
	  em28xx driver.

config BACKPORT_VIDEO_MT9V032
	tristate "Micron MT9V032 sensor support"
	depends on !VIDEO_MT9V032
	depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	depends on REGMAP_I2C
	---help---
	  This is a Video4Linux2 sensor-level driver for the Micron
	  MT9V032 752x480 CMOS sensor.

config BACKPORT_VIDEO_SR030PC30
	tristate "Siliconfile SR030PC30 sensor support"
	depends on !VIDEO_SR030PC30
	depends on I2C && BACKPORT_VIDEO_V4L2
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	---help---
	  This driver supports SR030PC30 VGA camera from Siliconfile

config BACKPORT_VIDEO_NOON010PC30
	tristate "Siliconfile NOON010PC30 sensor support"
	depends on !VIDEO_NOON010PC30
	depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	---help---
	  This driver supports NOON010PC30 CIF camera from Siliconfile

source "$BACKPORT_DIR/drivers/media/i2c/m5mols/Kconfig"

config BACKPORT_VIDEO_S5K6AA
	tristate "Samsung S5K6AAFX sensor support"
	depends on !VIDEO_S5K6AA
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	---help---
	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
	  camera sensor with an embedded SoC image signal processor.

config BACKPORT_VIDEO_S5K6A3
	tristate "Samsung S5K6A3 sensor support"
	depends on !VIDEO_S5K6A3
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	---help---
	  This is a V4L2 sensor-level driver for Samsung S5K6A3 raw
	  camera sensor.

config BACKPORT_VIDEO_S5K4ECGX
        tristate "Samsung S5K4ECGX sensor support"
	depends on !VIDEO_S5K4ECGX
        depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
        ---help---
          This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M
          camera sensor with an embedded SoC image signal processor.

config BACKPORT_VIDEO_S5K5BAF
	tristate "Samsung S5K5BAF sensor support"
	depends on !VIDEO_S5K5BAF
	depends on I2C && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	---help---
	  This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M
	  camera sensor with an embedded SoC image signal processor.

source "$BACKPORT_DIR/drivers/media/i2c/smiapp/Kconfig"

config BACKPORT_VIDEO_S5C73M3
	tristate "Samsung S5C73M3 sensor support"
	depends on !VIDEO_S5C73M3
	depends on I2C && SPI && VIDEO_V4L2 && BACKPORT_VIDEO_V4L2_SUBDEV_API
	---help---
	  This is a V4L2 sensor-level driver for Samsung S5C73M3
	  8 Mpixel camera.

comment "Flash devices"

config BACKPORT_VIDEO_ADP1653
	tristate "ADP1653 flash support"
	depends on !VIDEO_ADP1653
	depends on I2C && VIDEO_V4L2 && BACKPORT_MEDIA_CONTROLLER
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	---help---
	  This is a driver for the ADP1653 flash controller. It is used for
	  example in Nokia N900.

config BACKPORT_VIDEO_AS3645A
	tristate "AS3645A flash driver support"
	depends on !VIDEO_AS3645A
	depends on I2C && VIDEO_V4L2 && BACKPORT_MEDIA_CONTROLLER
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	---help---
	  This is a driver for the AS3645A and LM3555 flash controllers. It has
	  build in control for flash, torch and indicator LEDs.

config BACKPORT_VIDEO_LM3560
	tristate "LM3560 dual flash driver support"
	depends on !VIDEO_LM3560
	depends on I2C && VIDEO_V4L2 && BACKPORT_MEDIA_CONTROLLER
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	depends on REGMAP_I2C
	---help---
	  This is a driver for the lm3560 dual flash controllers. It controls
	  flash, torch LEDs.

config BACKPORT_VIDEO_LM3646
	tristate "LM3646 dual flash driver support"
	depends on !VIDEO_LM3646
	depends on I2C && VIDEO_V4L2 && BACKPORT_MEDIA_CONTROLLER
	depends on BACKPORT_MEDIA_CAMERA_SUPPORT
	depends on REGMAP_I2C
	---help---
	  This is a driver for the lm3646 dual flash controllers. It controls
	  flash, torch LEDs.

comment "Video improvement chips"

config BACKPORT_VIDEO_UPD64031A
	tristate "NEC Electronics uPD64031A Ghost Reduction"
	depends on !VIDEO_UPD64031A
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the NEC Electronics uPD64031A Ghost Reduction
	  video chip. It is most often found in NTSC TV cards made for
	  Japan and is used to reduce the 'ghosting' effect that can
	  be present in analog TV broadcasts.

	  To compile this driver as a module, choose M here: the
	  module will be called upd64031a.

config BACKPORT_VIDEO_UPD64083
	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
	depends on !VIDEO_UPD64083
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
	  separation video chip. It is used to improve the quality of
	  the colors of a composite signal.

	  To compile this driver as a module, choose M here: the
	  module will be called upd64083.

comment "Audio/Video compression chips"

config BACKPORT_VIDEO_SAA6752HS
	tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
	depends on !VIDEO_SAA6752HS
	depends on BACKPORT_VIDEO_V4L2 && I2C
	depends on CRC32
	---help---
	  Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
	  audio encoder with multiplexer.

	  To compile this driver as a module, choose M here: the
	  module will be called saa6752hs.

comment "Miscellaneous helper chips"

config BACKPORT_VIDEO_THS7303
	tristate "THS7303/53 Video Amplifier"
	depends on !VIDEO_THS7303
	depends on BACKPORT_VIDEO_V4L2 && I2C
	help
	  Support for TI THS7303/53 video amplifier

	  To compile this driver as a module, choose M here: the
	  module will be called ths7303.

config BACKPORT_VIDEO_M52790
	tristate "Mitsubishi M52790 A/V switch"
	depends on !VIDEO_M52790
	depends on BACKPORT_VIDEO_V4L2 && I2C
	---help---
	 Support for the Mitsubishi M52790 A/V switch.

	 To compile this driver as a module, choose M here: the
	 module will be called m52790.
endmenu

menu "Sensors used on soc_camera driver"

if BACKPORT_SOC_CAMERA
source "$BACKPORT_DIR/drivers/media/i2c/soc_camera/Kconfig"
endif

endmenu

endif
