PGBOUNCER.INI(5)

NAME

pgbouncer.ini - configuration file for pgbouncer

DESCRIPTION

The configuration file is in “ini” format. Section names are between “[" and "]”. Lines starting with “;” or “#” are taken as comments and ignored. The characters “;” and “#” are not recognized as special when they appear later in the line.

GENERIC SETTINGS

  logfile

Specifies the log file. For daemonization (-d), either this or syslog need to be set.

The log file is kept open, so after rotation, kill -HUP or on console RELOAD; should be done. On Windows, the service must be stopped and started.

Note that setting logfile does not by itself turn off logging to stderr. Use the command-line option -q or -d for that.

Default: not set

  pidfile

Specifies the PID file. Without pidfile set, daemonization (-d) is not allowed.

Default: not set

  listen_addr

Specifies a list (comma-separated) of addresses where to listen for TCP connections. You may also use * meaning “listen on all addresses”. When not set, only Unix socket connections are accepted.

Addresses can be specified numerically (IPv4/IPv6) or by name.

Default: not set

  listen_port

Which port to listen on. Applies to both TCP and Unix sockets.

Default: 6432

  unix_socket_dir

Specifies the location for Unix sockets. Applies to both the listening socket and to server connections. If set to an empty string, Unix sockets are disabled. A value that starts with @ specifies that a Unix socket in the abstract namespace should be created (currently supported on Linux and Windows).

For online reboot (-R) to work, a Unix socket needs to be configured, and it needs to be in the file-system namespace.

Default: /tmp (empty on Windows)

  unix_socket_mode

File system mode for Unix socket. Ignored for sockets in the abstract namespace. Not supported on Windows.

Default: 0777

  unix_socket_group

Group name to use for Unix socket. Ignored for sockets in the abstract namespace. Not supported on Windows.

Default: not set

  user

If set, specifies the Unix user to change to after startup. Works only if PgBouncer is started as root or if it’s already running as the given user. Not supported on Windows.

Default: not set

  pool_mode

Specifies when a server connection can be reused by other clients.

session
    Server is released back to pool after client disconnects. Default.

transaction
    Server is released back to pool after transaction finishes.

statement
    Server is released back to pool after query finishes. Transactions spanning multiple statements are disallowed in this mode.

  max_client_conn

Maximum number of client connections allowed.

When this setting is increased, then the file descriptor limits in the operating system might also have to be increased. Note that the number of file descriptors potentially used is more than max_client_conn. If each user connects under its own user name to the server, the theoretical maximum used is:

    max_client_conn + (max pool_size * total databases * total users)

If a database user is specified in the connection string (all users connect under the same user name), the theoretical maximum is:

    max_client_conn + (max pool_size * total databases)

The theoretical maximum should never be reached, unless somebody deliberately crafts a special load for it. Still, it means you should set the number of file descriptors to a safely high number.

Search for ulimit in your favorite shell man page. Note: ulimit does not apply in a Windows environment.

Default: 100

  default_pool_size

How many server connections to allow per user/database pair. Can be overridden in the per-database configuration.

Default: 20

  min_pool_size

Add more server connections to pool if below this number. Improves behavior when the normal load suddently comes back after a period of total inactivity. The value is effectively capped at the pool size.

Default: 0 (disabled)

  reserve_pool_size

How many additional connections to allow to a pool (see reserve_pool_timeout). 0 disables.

Default: 0 (disabled)

  reserve_pool_timeout

If a client has not been serviced in this time, use additional connections from the reserve pool. 0 disables. [seconds]

Default: 5.0

  max_db_connections

Do not allow more than this many server connections per database (regardless of user). This considers the PgBouncer database that the client has connected to, not the PostgreSQL database of the outgoing connection.

This can also be set per database in the [databases] section.

Note that when you hit the limit, closing a client connection to one pool will not immediately allow a server connection to be established for another pool, because the server connection for the first pool is still open. Once the server connection closes (due to idle timeout), a new server connection will immediately be opened for the waiting pool.

Default: 0 (unlimited)

  max_user_connections

Do not allow more than this many server connections per user (regardless of database). This considers the PgBouncer user that is associated with a pool, which is either the user specified for the server connection or in absence of that the user the client has connected as.

This can also be set per user in the [users] section.

Note that when you hit the limit, closing a client connection to one pool will not immediately allow a server connection to be established for another pool, because the server connection for the first pool is still open. Once the server connection closes (due to idle timeout), a new server connection will immediately be opened for the waiting pool.

Default: 0 (unlimited)

  server_round_robin

By default, PgBouncer reuses server connections in LIFO (last-in, first-out) manner, so that few connections get the most load. This gives best performance if you have a single server serving a database. But if there is a round-robin system behind a database address (TCP, DNS, or host list), then it is better if PgBouncer also uses connections in that manner, thus achieving uniform load.

Default: 0

  ignore_startup_parameters

By default, PgBouncer allows only parameters it can keep track of in startup packets: client_encoding, datestyle, timezone and standard_conforming_strings. All others parameters will raise an error. To allow others parameters, they can be specified here, so that PgBouncer knows that they are handled by the admin and it can ignore them.

Default: empty

  disable_pqexec

Disable the Simple Query protocol (PQexec). Unlike the Extended Query protocol, Simple Query allows multiple queries in one packet, which allows some classes of SQL-injection attacks. Disabling it can improve security. Obviously, this means only clients that exclusively use the Extended Query protocol will stay working.

Default: 0

  application_name_add_host

Add the client host address and port to the application name setting set on connection start. This helps in identifying the source of bad queries etc. This logic applies only at the start of a connection. If application_name is later changed with SET, PgBouncer does not change it again.

Default: 0

  conffile

Show location of current config file. Changing it will make PgBouncer use another config file for next RELOAD / SIGHUP.

Default: file from command line

  service_name

Used on win32 service registration.

Default: pgbouncer

  job_name

Alias for service_name.

  stats_period

Sets how often the averages shown in various SHOW commands are updated and how often aggregated statistics are written to the log (but see log_stats). [seconds]

Default: 60

AUTHENTICATION SETTINGS

PgBouncer handles its own client authentication and has its own database of users. These settings control this.

  auth_type

How to authenticate users.

cert
    Client must connect over TLS connection with a valid client certificate. The user name is then taken from the CommonName field from the certificate.

md5 Use MD5-based password check. This is the default authentication method. auth_file may contain both MD5-encrypted and plain-text passwords. If md5 is configured and a user has a SCRAM secret, then SCRAM authentication is used automatically instead.

scram-sha-256
    Use password check with SCRAM-SHA-256. auth_file has to contain SCRAM secrets or plain-text passwords.

plain
    The clear-text password is sent over the wire. Deprecated.

trust
    No authentication is done. The user name must still exist in auth_file.

any Like the trust method, but the user name given is ignored. Requires that all databases are configured to log in as a specific user. Additionally, the console database allows any user to log in as admin.

hba The actual authentication type is loaded from auth_hba_file. This allows different authentication methods for different access paths, for example: connections over Unix socket use the peer auth method, connections over TCP must use TLS.

pam PAM is used to authenticate users, auth_file is ignored. This method is not compatible with databases using the auth_user option. The service name reported to PAM is “pgbouncer”. pam is not supported in the HBA configuration file.

  auth_hba_file

HBA configuration file to use when auth_type is hba.

Default: not set

  auth_file

The name of the file to load user names and passwords from. See section Authentication file format below about details.

Most authentication types (see above) require that either auth_file or auth_user be set; otherwise there would be no users defined.

Default: not set

  auth_user

If auth_user is set, then any user not specified in auth_file will be queried through the auth_query query from pg_shadow in the database, using auth_user. The password of auth_user will be taken from auth_file. (If the auth_user does not require a password then it does not need to be defined in auth_file.)

Direct access to pg_shadow requires admin rights. It’s preferable to use a non-superuser that calls a SECURITY DEFINER function instead.

Default: not set

  auth_query

Query to load user’s password from database.

Direct access to pg_shadow requires admin rights. It’s preferable to use a non-superuser that calls a SECURITY DEFINER function instead.

Note that the query is run inside the target database. So if a function is used, it needs to be installed into each database.

Default: SELECT usename, passwd FROM pg_shadow WHERE usename=$1

LOG SETTINGS

  syslog

Toggles syslog on/off. On Windows, the event log is used instead.

Default: 0

  syslog_ident

Under what name to send logs to syslog.

Default: pgbouncer (program name)

  syslog_facility

Under what facility to send logs to syslog. Possibilities: auth, authpriv, daemon, user, local0-7.

Default: daemon

  log_connections

Log successful logins.

Default: 1

  log_disconnections

Log disconnections with reasons.

Default: 1

  log_pooler_errors

Log error messages the pooler sends to clients.

Default: 1

  log_stats

Write aggregated statistics into the log, every stats_period. This can be disabled if external monitoring tools are used to grab the same data from SHOW commands.

Default: 1

  verbose

Increase verbosity. Mirrors the “-v” switch on the command line. For example, using “-v -v” on the command line is the same as verbose=2.

Default: 0

CONSOLE ACCESS CONTROL

  admin_users

Comma-separated list of database users that are allowed to connect and run all commands on the console. Ignored when auth_type is any, in which case any user name is allowed in as admin.

Default: empty

  stats_users

Comma-separated list of database users that are allowed to connect and run read-only queries on the console. That means all SHOW commands except SHOW FDS.

Default: empty

CONNECTION SANITY CHECKS, TIMEOUTS

  server_reset_query

Query sent to server on connection release, before making it available to other clients. At that moment no transaction is in progress, so the value should not include ABORT or ROLLBACK.

The query is supposed to clean any changes made to the database session so that the next client gets the connection in a well-defined state. The default is DISCARD ALL, which cleans everything, but that leaves the next client no pre-cached state. It can be made lighter, e.g. DEALLOCATE ALL to just drop prepared statements, if the application does not break when some state is kept around.

When transaction pooling is used, the server_reset_query is not used, because in that mode, clients must not use any session-based features, since each transaction ends up in a different connection and thus gets a different session state.

Default: DISCARD ALL

  server_reset_query_always

Whether server_reset_query should be run in all pooling modes. When this setting is off (default), the server_reset_query will be run only in pools that are in sessions-pooling mode. Connections in transaction-pooling mode should not have any need for a reset query.

This setting is for working around broken setups that run applications that use session features over a transaction-pooled PgBouncer. It changes non-deterministic breakage to deterministic breakage: Clients always lose their state after each transaction.

Default: 0

  server_check_delay

How long to keep released connections available for immediate re-use, without running server_check_query on it. If 0 then the check is always run.

Default: 30.0

  server_check_query

Simple do-nothing query to check if the server connection is alive.

If an empty string, then sanity checking is disabled.

Default: select 1

  server_fast_close

Disconnect a server in session pooling mode immediately or after the end of the current transaction if it is in “close_needed” mode (set by RECONNECT, RELOAD that changes connection settings, or DNS change), rather than waiting for the session end. In statement or transaction pooling mode, this has no effect since that is the default behavior there.

If because of this setting a server connection is closed before the end of the client session, the client connection is also closed. This ensures that the client notices that the session has been interrupted.

This setting makes connection configuration changes take effect sooner if session pooling and long-running sessions are used. The downside is that client sessions are liable to be interrupted by a configuration change, so client applications will need logic to reconnect and reestablish session state. But note that no transactions will be lost, because running transactions are not interrupted, only idle sessions.

Default: 0

  server_lifetime

The pooler will close an unused (not currently linked to any client connection) server connection that has been connected longer than this. Setting it to 0 means the connection is to be used only once, then closed. [seconds]

Default: 3600.0

  server_idle_timeout

If a server connection has been idle more than this many seconds it will be closed. If 0 then this timeout is disabled. [seconds]

Default: 600.0

  server_connect_timeout

If connection and login don’t finish in this amount of time, the connection will be closed. [seconds]

Default: 15.0

  server_login_retry

If login to the server failed, because of failure to connect or from authentication, the pooler waits this much before retrying to connect. During the waiting interval, new clients trying to connect to the failing server will get an error immediately without another connection attempt. [seconds]

The purpose of this behavior is that clients don’t unnecessarily queue up waiting for a server connection to become available if the server is not working. However, it also means that if a server is momentarily failing, for example during a restart or if the configuration was erroneous, then it will take at least this long until the pooler will consider connecting to it again. Planned events such as restarts should normally be managed using the PAUSE command to avoid this.

Default: 15.0

  client_login_timeout

If a client connects but does not manage to log in in this amount of time, it will be disconnected. Mainly needed to avoid dead connections stalling SUSPEND and thus online restart. [seconds]

Default: 60.0

  autodb_idle_timeout

If the automatically created (via "*") database pools have been unused this many seconds, they are freed. The negative aspect of that is that their statistics are also forgotten. [seconds]

Default: 3600.0

  dns_max_ttl

How long DNS lookups can be cached. The actual DNS TTL is ignored. [seconds]

Default: 15.0

  dns_nxdomain_ttl

How long DNS errors and NXDOMAIN DNS lookups can be cached. [seconds]

Default: 15.0

  dns_zone_check_period

Period to check if a zone serial has changed.

PgBouncer can collect DNS zones from host names (everything after first dot) and then periodically check if the zone serial changes. If it notices changes, all host names under that zone are looked up again. If any host IP changes, its connections are invalidated.

Works only with UDNS and c-ares backends (configure option --with-udns or --with-cares).

Default: 0.0 (disabled)

  resolv_conf

The location of a custom resolv.conf file. This is to allow specifying custom DNS servers and perhaps other name resolution options, independent of the global operating system configuration.

Requires evdns (>= 2.0.3) or c-ares (>= 1.15.0) backend.

The parsing of the file is done by the DNS backend library, not PgBouncer, so see the library’s documentation for details on allowed syntax and directives.

Default: empty (use operating system defaults)

TLS SETTINGS

  client_tls_sslmode

TLS mode to use for connections from clients. TLS connections are disabled by default. When enabled, client_tls_key_file and client_tls_cert_file must be also configured to set up the key and certificate PgBouncer uses to accept client connections.

disable
    Plain TCP. If client requests TLS, it’s ignored. Default.

allow
    If client requests TLS, it is used. If not, plain TCP is used. If the client presents a client certificate, it is not validated.

prefer
    Same as allow.

require
    Client must use TLS. If not, the client connection is rejected. If the client presents a client certificate, it is not validated.

verify-ca
    Client must use TLS with valid client certificate.

verify-full
    Same as verify-ca.

  client_tls_key_file

Private key for PgBouncer to accept client connections.

Default: not set

  client_tls_cert_file

Certificate for private key. Clients can validate it.

Default: not set

  client_tls_ca_file

Root certificate file to validate client certificates.

Default: not set

  client_tls_protocols

Which TLS protocol versions are allowed. Allowed values: tlsv1.0, tlsv1.1, tlsv1.2, tlsv1.3. Shortcuts: all (tlsv1.0,tlsv1.1,tlsv1.2,tlsv1.3), secure (tlsv1.2,tlsv1.3), legacy (all).

Default: secure

  client_tls_ciphers

Allowed TLS ciphers, in OpenSSL syntax. Shortcuts: default/secure, compat/legacy, insecure/all, normal, fast.

Only connections using TLS version 1.2 and lower are affected. There is currently no setting that controls the cipher choices used by TLS version 1.3 connections.

Default: fast

  client_tls_ecdhcurve

Elliptic Curve name to use for ECDH key exchanges.

Allowed values: none (DH is disabled), auto (256-bit ECDH), curve name

Default: auto

  client_tls_dheparams

DHE key exchange type.

Allowed values: none (DH is disabled), auto (2048-bit DH), legacy (1024-bit DH)

Default: auto

  server_tls_sslmode

TLS mode to use for connections to PostgreSQL servers. TLS connections are disabled by default.

disable
    Plain TCP. TCP is not even requested from the server. Default.

allow
    FIXME: if server rejects plain, try TLS?

prefer
    TLS connection is always requested first from PostgreSQL. If refused, the connection will be established over plain TCP. Server certificate is not validated.

require
    Connection must go over TLS. If server rejects it, plain TCP is not attempted. Server certificate is not validated.

verify-ca
    Connection must go over TLS and server certificate must be valid according to server_tls_ca_file. Server host name is not checked against certificate.

verify-full
    Connection must go over TLS and server certificate must be valid according to server_tls_ca_file. Server host name must match certificate information.

  server_tls_ca_file

Root certificate file to validate PostgreSQL server certificates.

Default: not set

  server_tls_key_file

Private key for PgBouncer to authenticate against PostgreSQL server.

Default: not set

  server_tls_cert_file

Certificate for private key. PostgreSQL server can validate it.

Default: not set

  server_tls_protocols

Which TLS protocol versions are allowed. Allowed values: tlsv1.0, tlsv1.1, tlsv1.2, tlsv1.3. Shortcuts: all (tlsv1.0,tlsv1.1,tlsv1.2,tlsv1.3), secure (tlsv1.2,tlsv1.3), legacy (all).

Default: secure

  server_tls_ciphers

Allowed TLS ciphers, in OpenSSL syntax. Shortcuts: default/secure, compat/legacy, insecure/all, normal, fast.

Only connections using TLS version 1.2 and lower are affected. There is currently no setting that controls the cipher choices used by TLS version 1.3 connections.

Default: fast

DANGEROUS TIMEOUTS

Setting the following timeouts can cause unexpected errors.

  query_timeout

Queries running longer than that are canceled. This should be used only with a slightly smaller server-side statement_timeout, to apply only for network problems. [seconds]

Default: 0.0 (disabled)

  query_wait_timeout

Maximum time queries are allowed to spend waiting for execution. If the query is not assigned to a server during that time, the client is disconnected. 0 disables. If this is disabled, clients will be queued indefinitely. [seconds]

This setting is used to prevent unresponsive servers from grabbing up connections. It also helps when the server is down or rejects connections for any reason.

Default: 120

  client_idle_timeout

Client connections idling longer than this many seconds are closed. This should be larger than the client-side connection lifetime settings, and only used for network problems. [seconds]

Default: 0.0 (disabled)

  idle_transaction_timeout

If a client has been in “idle in transaction” state longer, it will be disconnected. [seconds]

Default: 0.0 (disabled)

  suspend_timeout

How long to wait for buffer flush during SUSPEND or reboot (-R). A connection is dropped if the flush does not succeed. [seconds]

Default: 10

LOW-LEVEL NETWORK SETTINGS

  pkt_buf

Internal buffer size for packets. Affects size of TCP packets sent and general memory usage. Actual libpq packets can be larger than this, so no need to set it large.

Default: 4096

  max_packet_size

Maximum size for PostgreSQL packets that PgBouncer allows through. One packet is either one query or one result set row. The full result set can be larger.

Default: 2147483647

  listen_backlog

Backlog argument for listen(2). Determines how many new unanswered connection attempts are kept in the queue. When the queue is full, further new connections are dropped.

Default: 128

  sbuf_loopcnt

How many times to process data on one connection, before proceeding. Without this limit, one connection with a big result set can stall PgBouncer for a long time. One loop processes one pkt_buf amount of data. 0 means no limit.

Default: 5

  so_reuseport

Specifies whether to set the socket option SO_REUSEPORT on TCP listening sockets. On some operating systems, this allows running multiple PgBouncer instances on the same host listening on the same port and having the kernel distribute the connections automatically. This option is a way to get PgBouncer to use more CPU cores. (PgBouncer is single-threaded and uses one CPU core per instance.)

The behavior in detail depends on the operating system kernel. As of this writing, this setting has the desired effect on (sufficiently recent versions of) Linux, DragonFlyBSD, and FreeBSD. (On FreeBSD, it applies the socket option SO_REUSEPORT_LB instead.) Some other operating systems support the socket option but it won’t have the desired effect: It will allow multiple processes to bind to the same port but only one of them will get the connections. See your operating system’s setsockopt() documentation for details.

On systems that don’t support the socket option at all, turning this setting on will result in an error.

Each PgBouncer instance on the same host needs different settings for at least unix_socket_dir and pidfile, as well as logfile if that is used. Also note that if you make use of this option, you can no longer connect to a specific PgBouncer instance via TCP/IP, which might have implications for monitoring and metrics collection.

Default: 0

  tcp_defer_accept

Sets the TCP_DEFER_ACCEPT socket option; see man 7 tcp for details. (This is a Boolean option: 1 means enabled. The actual value set if enabled is currently hardcoded to 45 seconds.)

This is currently only supported on Linux.

Default: 1 on Linux, otherwise 0

  tcp_socket_buffer

Default: not set

  tcp_keepalive

Turns on basic keepalive with OS defaults.

On Linux, the system defaults are tcp_keepidle=7200, tcp_keepintvl=75, tcp_keepcnt=9. They are probably similar on other operating systems.

Default: 1

  tcp_keepcnt

Default: not set

  tcp_keepidle

Default: not set

  tcp_keepintvl

Default: not set

  tcp_user_timeout

Sets the TCP_USER_TIMEOUT socket option. This specifies the maximum amount of time in milliseconds that transmitted data may remain unacknowledged before the TCP connection is forcibly closed. If set to 0, then operating system’s default is used.

This is currently only supported on Linux.

Default: 0

SECTION [DATABASES]

The section [databases] defines the names of the databases that clients of PgBouncer can connect to and specifies where those connections will be routed. The section contains key=value lines like

    dbname = connection string

where the key will be taken as a database name and the value as a connection string, consisting of key=value pairs of connection parameters, described below (similar to libpq, but the actual libpq is not used and the set of available features is different). Example:

    foodb = host=host1.example.com port=5432
    bardb = host=localhost dbname=bazdb

The database name can contain characters _0-9A-Za-z without quoting. Names that contain other characters need to be quoted with standard SQL identifier quoting: double quotes, with "" for a single instance of a double quote.

The database name “pgbouncer” is reserved for the admin console and cannot be used as a key here.

"*" acts as a fallback database: If the exact name does not exist, its value is taken as connection string for the requested database. For example, if there is an entry (and no other overriding entries)

    * = host=foo

then a connection to PgBouncer specifying a database “bar” will effectively behave as if an entry

    bar = host=foo dbname=bar

exists (taking advantage of the default for dbname being the client-side database name; see below).

Such automatically created database entries are cleaned up if they stay idle longer than the time specified by the autodb_idle_timeout parameter.

  dbname

Destination database name.

Default: same as client-side database name

  host

Host name or IP address to connect to. Host names are resolved at connection time, the result is cached per dns_max_ttl parameter. When a host name’s resolution changes, existing server connections are automatically closed when they are released (according to the pooling mode), and new server connections immediately use the new resolution. If DNS returns several results, they are used in a round-robin manner.

If the value begins with /, then a Unix socket in the file-system namespace is used. If the value begins with @, then a Unix socket in the abstract namespace is used.

A comma-separated list of host names or addresses can be specified. In that case, connections are made in a round-robin manner. (If a host list contains host names that in turn resolve via DNS to multiple addresses, the round-robin systems operate independently. This is an implementation dependency that is subject to change.) Note that in a list, all hosts must be available at all times: There are no mechanisms to skip unreachable hosts or to select only available hosts from a list or similar. (This is different from what a host list in libpq means.) Also note that this only affects how the destinations of new connections are chosen. See also the setting server_round_robin for how clients are assigned to already established server connections.

Examples:

    host=localhost
    host=127.0.0.1
    host=2001:0db8:85a3:0000:0000:8a2e:0370:7334
    host=/var/run/postgresql
    host=192.168.0.1,192.168.0.2,192.168.0.3

Default: not set, meaning to use a Unix socket

  port

Default: 5432

  user

If user= is set, all connections to the destination database will be done with the specified user, meaning that there will be only one pool for this database.

Otherwise, PgBouncer logs into the destination database with the client user name, meaning that there will be one pool per user.

  password

If no password is specified here, the password from the auth_file or auth_query will be used.

  auth_user

Override of the global auth_user setting, if specified.

  pool_size

Set the maximum size of pools for this database. If not set, the default_pool_size is used.

  min_pool_size

Set the minimum pool size for this database. If not set, the global min_pool_size is used.

  reserve_pool

Set additional connections for this database. If not set, reserve_pool_size is used.

  connect_query

Query to be executed after a connection is established, but before allowing the connection to be used by any clients. If the query raises errors, they are logged but ignored otherwise.

  pool_mode

Set the pool mode specific to this database. If not set, the default pool_mode is used.

  max_db_connections

Configure a database-wide maximum (i.e. all pools within the database will not have more than this many server connections).

  client_encoding

Ask specific client_encoding from server.

  datestyle

Ask specific datestyle from server.

  timezone

Ask specific timezone from server.

SECTION [USERS]

This section contains key=value lines like

    user1 = settings

where the key will be taken as a user name and the value as a list of key=value pairs of configuration settings specific for this user. Example:

    user1 = pool_mode=session

Only a few settings are available here.

  pool_mode

Set the pool mode to be used for all connections from this user. If not set, the database or default pool_mode is used.

  max_user_connections

Configure a maximum for the user (i.e. all pools with the user will not have more than this many server connections).

INCLUDE DIRECTIVE

The PgBouncer configuration file can contain include directives, which specify another configuration file to read and process. This allows splitting the configuration file into physically separate parts. The include directives look like this:

    %include filename

If the file name is not an absolute path, it is taken as relative to the current working directory.

AUTHENTICATION FILE FORMAT

This section describes the format of the file specified by the auth_file setting. It is a text file in the following format:

    "username1" "password" ...
    "username2" "md5abcdef012342345" ...
    "username2" "SCRAM-SHA-256$<iterations>:<salt>$<storedkey>:<serverkey>"

There should be at least 2 fields, surrounded by double quotes. The first field is the user name and the second is either a plain-text, a MD5-hashed password, or a SCRAM secret. PgBouncer ignores the rest of the line. Double quotes in a field value can be escaped by writing two double quotes.

PostgreSQL MD5-hashed password format:

    "md5" + md5(password + username)

So user admin with password 1234 will have MD5-hashed password md545f2603610af569b6155c45067268c6b.

PostgreSQL SCRAM secret format:

    SCRAM-SHA-256$<iterations>:<salt>$<storedkey>:<serverkey>

See the PostgreSQL documentation and RFC 5803 for details on this.

The passwords or secrets stored in the authentication file serve two purposes. First, they are used to verify the passwords of incoming client connections, if a password-based authentication method is configured. Second, they are used as the passwords for outgoing connections to the backend server, if the backend server requires password-based authentication (unless the password is specified directly in the database’s connection string). The latter works if the password is stored in plain text or MD5-hashed. SCRAM secrets can only be used for logging into a server if the client authentication also uses SCRAM, the PgBouncer database definition does not specify a user name, and the SCRAM secrets are identical in PgBouncer and the PostgreSQL server (same salt and iterations, not merely the same password). This is due to an inherent security property of SCRAM: The stored SCRAM secret cannot by itself be used for deriving login credentials.

The authentication file can be written by hand, but it’s also useful to generate it from some other list of users and passwords. See ./etc/mkauth.py for a sample script to generate the authentication file from the pg_shadow system table. Alternatively, use auth_query instead of auth_file to avoid having to maintain a separate authentication file.

HBA FILE FORMAT

The location of the HBA file is specified by the setting auth_hba_file. It is only used if auth_type is set to hba.

The file follows the format of the PostgreSQL pg_hba.conf file (see <https://www.postgresql.org/docs/current/auth-pg-hba-conf.html>).

•   Supported record types: local, host, hostssl, hostnossl.

•   Database field: Supports all, sameuser, @file, multiple names. Not supported: replication, samerole, samegroup.

•   User name field: Supports all, @file, multiple names. Not supported: +groupname.

•   Address field: Supports IPv4, IPv6. Not supported: DNS names, domain prefixes.

•   Auth-method field: Only methods supported by PgBouncer’s auth_type are supported, plus peer and reject, but except any and pam, which only work globally. User name map (map=) parameter is not supported.

EXAMPLES

Small example configuration:

    [databases]
    template1 = host=localhost dbname=template1 auth_user=someuser
    [pgbouncer]
    pool_mode = session
    listen_port = 6432
    listen_addr = localhost
    auth_type = md5
    auth_file = users.txt
    logfile = pgbouncer.log
    pidfile = pgbouncer.pid
    admin_users = someuser
    stats_users = stat_collector

Database examples:

    [databases]
    ; foodb over Unix socket
    foodb =
    ; redirect bardb to bazdb on localhost
    bardb = host=localhost dbname=bazdb
    ; access to destination database will go with single user
    forcedb = host=localhost port=300 user=baz password=foo client_encoding=UNICODE datestyle=ISO

Example of a secure function for auth_query:

    CREATE OR REPLACE FUNCTION pgbouncer.user_lookup(in i_username text, out uname text, out phash text)
    RETURNS record AS $$
    BEGIN
        SELECT usename, passwd FROM pg_catalog.pg_shadow
        WHERE usename = i_username INTO uname, phash;
        RETURN;
    END;
    $$ LANGUAGE plpgsql SECURITY DEFINER;
    REVOKE ALL ON FUNCTION pgbouncer.user_lookup(text) FROM public, pgbouncer;
    GRANT EXECUTE ON FUNCTION pgbouncer.user_lookup(text) TO pgbouncer;

SEE ALSO

pgbouncer(1) - man page for general usage, console commands

<https://www.pgbouncer.org/>