Small. Fast. Reliable.
Choose any three.

## SQLite Session Module C/C++ Interface

This page defines the C-language interface to the SQLite session extension. This is not a tutorial. These pages are designed to be precise, not easy to read. A tutorial is available separately.

This page contains all C-language interface information in a single HTML file. The same information is also available broken out into some smaller pages for easier viewing, if you prefer.

This document is created by a script which scans comments in the source code file sqlite3session.h.

## Objects:

- sqlite3_changegroup
- sqlite3_changeset_iter
- sqlite3_rebaser(exp)
- sqlite3_session

## Constants:

- SQLITE_CHANGESETAPPLY_FKNOACTION
- SQLITE_CHANGESETAPPLY_IGNORENOOP
- SQLITE_CHANGESETAPPLY_INVERT
- SQLITE_CHANGESETAPPLY_NOSAVEPOINT
- SQLITE_CHANGESETSTART_INVERT
- SQLITE_CHANGESET_ABORT
- SQLITE_CHANGESET_CONFLICT
- SQLITE_CHANGESET_CONSTRAINT
- SQLITE_CHANGESET_DATA
- SQLITE_CHANGESET_FOREIGN_KEY
- SQLITE_CHANGESET_NOTFOUND
- SQLITE_CHANGESET_OMIT
- SQLITE_CHANGESET_REPLACE
- SQLITE_SESSION_CONFIG_STRMSIZE
- SQLITE_SESSION_OBJCONFIG_ROWID
- SQLITE_SESSION_OBJCONFIG_SIZE

## Functions:

- sqlite3changegroup_add
- sqlite3changegroup_add_strm
- sqlite3changegroup_delete
- sqlite3changegroup_new
- sqlite3changegroup_output
- sqlite3changegroup_output_strm
- sqlite3changegroup_schema
- sqlite3changeset_apply
- sqlite3changeset_apply_strm
- sqlite3changeset_apply_v2
- sqlite3changeset_apply_v2_strm
- sqlite3changeset_concat
- sqlite3changeset_concat_strm
- sqlite3changeset_conflict
- sqlite3changeset_finalize
- sqlite3changeset_fk_conflicts
- sqlite3changeset_invert
- sqlite3changeset_invert_strm
- sqlite3changeset_new
- sqlite3changeset_next
- sqlite3changeset_old
- sqlite3changeset_op
- sqlite3changeset_pk
- sqlite3changeset_start
- sqlite3changeset_start_strm
- sqlite3changeset_start_v2
- sqlite3changeset_start_v2_strm
- sqlite3changeset_upgrade
- sqlite3rebaser_configure(exp)
- sqlite3rebaser_create(exp)
- sqlite3rebaser_delete(exp)
- sqlite3rebaser_rebase(exp)
- sqlite3rebaser_rebase_strm
- sqlite3session_attach
- sqlite3session_changeset
- sqlite3session_changeset_size
- sqlite3session_changeset_strm
- sqlite3session_config
- sqlite3session_create
- sqlite3session_delete
- sqlite3session_diff
- sqlite3session_enable
- sqlite3session_indirect
- sqlite3session_isempty
- sqlite3session_memory_used
- sqlite3session_object_config
- sqlite3session_patchset
- sqlite3session_patchset_strm
- sqlite3session_table_filter

## Flags for sqlite3changeset_start_v2

>     #define SQLITE_CHANGESETSTART_INVERT        0x0002

The following flags may passed via the 4th parameter to sqlite3changeset_start_v2 and sqlite3changeset_start_v2_strm:

SQLITE_CHANGESETAPPLY_INVERT
  Invert the changeset while iterating through it. This is equivalent to inverting a changeset using sqlite3changeset_invert() before applying it. It is an error to specify this flag with a patchset.

  ## Values for sqlite3session_config().

  >     #define SQLITE_SESSION_CONFIG_STRMSIZE 1

  ## Changegroup Handle

  >     typedef struct sqlite3_changegroup sqlite3_changegroup;

  A changegroup is an object used to combine two or more changesets or patchsets

  Constructor: sqlite3changegroup_new()

  Destructor: sqlite3changegroup_delete()

  Methods: sqlite3changegroup_add(), sqlite3changegroup_output()

  ## Changeset Iterator Handle

  >     typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;

  An instance of this object acts as a cursor for iterating over the elements of a changeset or patchset.

  Constructors: sqlite3changeset_start(), sqlite3changeset_start_v2()

  - sqlite3changeset_conflict
  - sqlite3changeset_finalize
  - sqlite3changeset_fk_conflicts
  - sqlite3changeset_new
  - sqlite3changeset_next
  - sqlite3changeset_old
  - sqlite3changeset_op
  - sqlite3changeset_pk

  ## Rebasing changesets

  >     typedef struct sqlite3_rebaser sqlite3_rebaser;

  Important: This interface is experimental and is subject to change without notice.

  Suppose there is a site hosting a database in state S0. And that modifications are made that move that database to state S1 and a changeset recorded (the "local" changeset). Then, a changeset based on S0 is received from another site (the "remote" changeset) and applied to the database. The database is then in state (S1+"remote"), where the exact state depends on any conflict resolution decisions (OMIT or REPLACE) made while applying "remote". Rebasing a changeset is to update it to take those conflict resolution decisions into account, so that the same conflicts do not have to be resolved elsewhere in the network.

  For example, if both the local and remote changesets contain an INSERT of the same key on "CREATE TABLE t1(a PRIMARY KEY, b)":

  local: INSERT INTO t1 VALUES(1, 'v1'); remote: INSERT INTO t1 VALUES(1, 'v2');

  and the conflict resolution is REPLACE, then the INSERT change is removed from the local changeset (it was overridden). Or, if the conflict resolution was "OMIT", then the local changeset is modified to instead contain:

  UPDATE t1 SET b = 'v2' WHERE a=1;

  Changes within the local changeset are rebased as follows:

  Local INSERT
    This may only conflict with a remote INSERT. If the conflict resolution was OMIT, then add an UPDATE change to the rebased changeset. Or, if the conflict resolution was REPLACE, add nothing to the rebased changeset.

  Local DELETE
    This may conflict with a remote UPDATE or DELETE. In both cases the only possible resolution is OMIT. If the remote operation was a DELETE, then add no change to the rebased changeset. If the remote operation was an UPDATE, then the old.* fields of change are updated to reflect the new.* values in the UPDATE.

  Local UPDATE
    This may conflict with a remote UPDATE or DELETE. If it conflicts with a DELETE, and the conflict resolution was OMIT, then the update is changed into an INSERT. Any undefined values in the new.* record from the update change are filled in using the old.* values from the conflicting DELETE. Or, if the conflict resolution was REPLACE, the UPDATE change is simply omitted from the rebased changeset.

    If conflict is with a remote UPDATE and the resolution is OMIT, then the old.* values are rebased using the new.* values in the remote change. Or, if the resolution is REPLACE, then the change is copied into the rebased changeset with updates to columns also updated by the conflicting remote UPDATE removed. If this means no columns would be updated, the change is omitted.

  A local change may be rebased against multiple remote changes simultaneously. If a single key is modified by multiple remote changesets, they are combined as follows before the local changeset is rebased:

  - If there has been one or more REPLACE resolutions on a key, it is rebased according to a REPLACE.

  - If there have been no REPLACE resolutions on a key, then the local changeset is rebased according to the most recent of the OMIT resolutions.

  Note that conflict resolutions from multiple remote changesets are combined on a per-field basis, not per-row. This means that in the case of multiple remote UPDATE operations, some fields of a single local change may be rebased for REPLACE while others are rebased for OMIT.

  In order to rebase a local changeset, the remote changeset must first be applied to the local database using sqlite3changeset_apply_v2() and the buffer of rebase information captured. Then:

  1. An sqlite3_rebaser object is created by calling sqlite3rebaser_create().
  2. The new object is configured with the rebase buffer obtained from sqlite3changeset_apply_v2() by calling sqlite3rebaser_configure(). If the local changeset is to be rebased against multiple remote changesets, then sqlite3rebaser_configure() should be called multiple times, in the same order that the multiple sqlite3changeset_apply_v2() calls were made.
  3. Each local changeset is rebased by calling sqlite3rebaser_rebase().
  4. The sqlite3_rebaser object is deleted by calling sqlite3rebaser_delete().

  ## Session Object Handle

  >     typedef struct sqlite3_session sqlite3_session;

  An instance of this object is a session that can be used to record changes to a database.

  Constructor: sqlite3session_create()

  Destructor: sqlite3session_delete()

  - sqlite3session_attach
  - sqlite3session_changeset
  - sqlite3session_changeset_size
  - sqlite3session_diff
  - sqlite3session_enable
  - sqlite3session_indirect
  - sqlite3session_object_config
  - sqlite3session_patchset
  - sqlite3session_table_filter

  ## Add A Changeset To A Changegroup

  >     int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData);

  Add all changes within the changeset (or patchset) in buffer pData (size nData bytes) to the changegroup.

  If the buffer contains a patchset, then all prior calls to this function on the same changegroup object must also have specified patchsets. Or, if the buffer contains a changeset, so must have the earlier calls to this function. Otherwise, SQLITE_ERROR is returned and no changes are added to the changegroup.

  Rows within the changeset and changegroup are identified by the values in their PRIMARY KEY columns. A change in the changeset is considered to apply to the same row as a change already present in the changegroup if the two rows have the same primary key.

  Changes to rows that do not already appear in the changegroup are simply copied into it. Or, if both the new changeset and the changegroup contain changes that apply to a single row, the final contents of the changegroup depends on the type of each change, as follows:

  Existing Change | New Change | Output Change
  --- | --- | ---
  INSERT | INSERT | The new change is ignored. This case does not occur if the new changeset was recorded immediately after the changesets already added to the changegroup.
  INSERT | UPDATE | The INSERT change remains in the changegroup. The values in the INSERT change are modified as if the row was inserted by the existing change and then updated according to the new change.
  INSERT | DELETE | The existing INSERT is removed from the changegroup. The DELETE is not added.
  UPDATE | INSERT | The new change is ignored. This case does not occur if the new changeset was recorded immediately after the changesets already added to the changegroup.
  UPDATE | UPDATE | The existing UPDATE remains within the changegroup. It is amended so that the accompanying values are as if the row was updated once by the existing change and then again by the new change.
  UPDATE | DELETE | The existing UPDATE is replaced by the new DELETE within the changegroup.
  DELETE | INSERT | If one or more of the column values in the row inserted by the new change differ from those in the row deleted by the existing change, the existing DELETE is replaced by an UPDATE within the changegroup. Otherwise, if the inserted row is exactly the same as the deleted row, the existing DELETE is simply discarded.
  DELETE | UPDATE | The new change is ignored. This case does not occur if the new changeset was recorded immediately after the changesets already added to the changegroup.
  DELETE | DELETE | The new change is ignored. This case does not occur if the new changeset was recorded immediately after the changesets already added to the changegroup.

  If the new changeset contains changes to a table that is already present in the changegroup, then the number of columns and the position of the primary key columns for the table must be consistent. If this is not the case, this function fails with SQLITE_SCHEMA. Except, if the changegroup object has been configured with a database schema using the sqlite3changegroup_schema() API, then it is possible to combine changesets with different numbers of columns for a single table, provided that they are otherwise compatible.

  If the input changeset appears to be corrupt and the corruption is detected, SQLITE_CORRUPT is returned. Or, if an out-of-memory condition occurs during processing, this function returns SQLITE_NOMEM.

  In all cases, if an error occurs the state of the final contents of the changegroup is undefined. If no error occurs, SQLITE_OK is returned.

  ## Delete A Changegroup Object

  >     void sqlite3changegroup_delete(sqlite3_changegroup*);

  ## Create A New Changegroup Object

  >     int sqlite3changegroup_new(sqlite3_changegroup **pp);

  An sqlite3_changegroup object is used to combine two or more changesets (or patchsets) into a single changeset (or patchset). A single changegroup object may combine changesets or patchsets, but not both. The output is always in the same format as the input.

  If successful, this function returns SQLITE_OK and populates (*pp) with a pointer to a new sqlite3_changegroup object before returning. The caller should eventually free the returned object using a call to sqlite3changegroup_delete(). If an error occurs, an SQLite error code (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.

  The usual usage pattern for an sqlite3_changegroup object is as follows:

  - It is created using a call to sqlite3changegroup_new().

  - Zero or more changesets (or patchsets) are added to the object by calling sqlite3changegroup_add().

  - The result of combining all input changesets together is obtained by the application via a call to sqlite3changegroup_output().

  - The object is deleted using a call to sqlite3changegroup_delete().

  Any number of calls to add() and output() may be made between the calls to new() and delete(), and in any order.

  As well as the regular sqlite3changegroup_add() and sqlite3changegroup_output() functions, also available are the streaming versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().

  ## Obtain A Composite Changeset From A Changegroup

  >     int sqlite3changegroup_output(
  >       sqlite3_changegroup*,
  >       int *pnData,                    /* OUT: Size of output buffer in bytes */
  >       void **ppData                   /* OUT: Pointer to output buffer */
  >     );

  Obtain a buffer containing a changeset (or patchset) representing the current contents of the changegroup. If the inputs to the changegroup were themselves changesets, the output is a changeset. Or, if the inputs were patchsets, the output is also a patchset.

  As with the output of the sqlite3session_changeset() and sqlite3session_patchset() functions, all changes related to a single table are grouped together in the output of this function. Tables appear in the same order as for the very first changeset added to the changegroup. If the second or subsequent changesets added to the changegroup contain changes for tables that do not appear in the first changeset, they are appended onto the end of the output changeset, again in the order in which they are first encountered.

  If an error occurs, an SQLite error code is returned and the output variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK is returned and the output variables are set to the size of and a pointer to the output buffer, respectively. In this case it is the responsibility of the caller to eventually free the buffer using a call to sqlite3_free().

  ## Add a Schema to a Changegroup

  >     int sqlite3changegroup_schema(sqlite3_changegroup*, sqlite3*, const char *zDb);

  This method may be used to optionally enforce the rule that the changesets added to the changegroup handle must match the schema of database zDb ("main", "temp", or the name of an attached database). If sqlite3changegroup_add() is called to add a changeset that is not compatible with the configured schema, SQLITE_SCHEMA is returned and the changegroup object is left in an undefined state.

  A changeset schema is considered compatible with the database schema in the same way as for sqlite3changeset_apply(). Specifically, for each table in the changeset, there exists a database table with:

  - The name identified by the changeset, and
  - at least as many columns as recorded in the changeset, and
  - the primary key columns in the same position as recorded in the changeset.

  The output of the changegroup object always has the same schema as the database nominated using this function. In cases where changesets passed to sqlite3changegroup_add() have fewer columns than the corresponding table in the database schema, these are filled in using the default column values from the database schema. This makes it possible to combined changesets that have different numbers of columns for a single table within a changegroup, provided that they are otherwise compatible.

  ## Concatenate Two Changeset Objects

  >     int sqlite3changeset_concat(
  >       int nA,                         /* Number of bytes in buffer pA */
  >       void *pA,                       /* Pointer to buffer containing changeset A */
  >       int nB,                         /* Number of bytes in buffer pB */
  >       void *pB,                       /* Pointer to buffer containing changeset B */
  >       int *pnOut,                     /* OUT: Number of bytes in output changeset */
  >       void **ppOut                    /* OUT: Buffer containing output changeset */
  >     );

  This function is used to concatenate two changesets, A and B, into a single changeset. The result is a changeset equivalent to applying changeset A followed by changeset B.

  This function combines the two input changesets using an sqlite3_changegroup object. Calling it produces similar results as the following code fragment:

        sqlite3_changegroup *pGrp;
        rc = sqlite3_changegroup_new(&pGrp);
        if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
        if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nB, pB);
        if( rc==SQLITE_OK ){
          rc = sqlite3changegroup_output(pGrp, pnOut, ppOut);
        }else{
          *ppOut = 0;
          *pnOut = 0;
        }

  Refer to the sqlite3_changegroup documentation below for details.

  ## Obtain Conflicting Row Values From A Changeset Iterator

  >     int sqlite3changeset_conflict(
  >       sqlite3_changeset_iter *pIter,  /* Changeset iterator */
  >       int iVal,                       /* Column number */
  >       sqlite3_value **ppValue         /* OUT: Value from conflicting row */
  >     );

  This function should only be used with iterator objects passed to a conflict-handler callback by sqlite3changeset_apply() with either SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this function is called on any other iterator, SQLITE_MISUSE is returned and *ppValue is set to NULL.

  Argument iVal must be greater than or equal to 0, and less than the number of columns in the table affected by the current change. Otherwise, SQLITE_RANGE is returned and *ppValue is set to NULL.

  If successful, this function sets *ppValue to point to a protected sqlite3_value object containing the iVal'th value from the "conflicting row" associated with the current conflict-handler callback and returns SQLITE_OK.

  If some other error occurs (e.g. an OOM condition), an SQLite error code is returned and *ppValue is set to NULL.

  ## Finalize A Changeset Iterator

  >     int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);

  This function is used to finalize an iterator allocated with sqlite3changeset_start().

  This function should only be called on iterators created using the sqlite3changeset_start() function. If an application calls this function with an iterator passed to a conflict-handler by sqlite3changeset_apply(), SQLITE_MISUSE is immediately returned and the call has no effect.

  If an error was encountered within a call to an sqlite3changeset_xxx() function (for example an SQLITE_CORRUPT in sqlite3changeset_next() or an SQLITE_NOMEM in sqlite3changeset_new()) then an error code corresponding to that error is returned by this function. Otherwise, SQLITE_OK is returned. This is to allow the following pattern (pseudo-code):

        sqlite3changeset_start();
        while( SQLITE_ROW==sqlite3changeset_next() ){
          // Do something with change.
        }
        rc = sqlite3changeset_finalize();
        if( rc!=SQLITE_OK ){
          // An error has occurred
        }

  ## Determine The Number Of Foreign Key Constraint Violations

  >     int sqlite3changeset_fk_conflicts(
  >       sqlite3_changeset_iter *pIter,  /* Changeset iterator */
  >       int *pnOut                      /* OUT: Number of FK violations */
  >     );

  This function may only be called with an iterator passed to an SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case it sets the output variable to the total number of known foreign key violations in the destination database and returns SQLITE_OK.

  In all other cases this function returns SQLITE_MISUSE.

  ## Invert A Changeset

  >     int sqlite3changeset_invert(
  >       int nIn, const void *pIn,       /* Input changeset */
  >       int *pnOut, void **ppOut        /* OUT: Inverse of input */
  >     );

  This function is used to "invert" a changeset object. Applying an inverted changeset to a database reverses the effects of applying the uninverted changeset. Specifically:

  - Each DELETE change is changed to an INSERT, and
  - Each INSERT change is changed to a DELETE, and
  - For each UPDATE change, the old.* and new.* values are exchanged.

  This function does not change the order in which changes appear within the changeset. It merely reverses the sense of each individual change.

  If successful, a pointer to a buffer containing the inverted changeset is stored in *ppOut, the size of the same buffer is stored in *pnOut, and SQLITE_OK is returned. If an error occurs, both *pnOut and *ppOut are zeroed and an SQLite error code returned.

  It is the responsibility of the caller to eventually call sqlite3_free() on the *ppOut pointer to free the buffer allocation following a successful call to this function.

  WARNING/TODO: This function currently assumes that the input is a valid changeset. If it is not, the results are undefined.

  ## Obtain new.* Values From A Changeset Iterator

  >     int sqlite3changeset_new(
  >       sqlite3_changeset_iter *pIter,  /* Changeset iterator */
  >       int iVal,                       /* Column number */
  >       sqlite3_value **ppValue         /* OUT: New value (or NULL pointer) */
  >     );

  The pIter argument passed to this function may either be an iterator passed to a conflict-handler by sqlite3changeset_apply(), or an iterator created by sqlite3changeset_start(). In the latter case, the most recent call to sqlite3changeset_next() must have returned SQLITE_ROW. Furthermore, it may only be called if the type of change that the iterator currently points to is either SQLITE_UPDATE or SQLITE_INSERT. Otherwise, this function returns SQLITE_MISUSE and sets *ppValue to NULL.

  Argument iVal must be greater than or equal to 0, and less than the number of columns in the table affected by the current change. Otherwise, SQLITE_RANGE is returned and *ppValue is set to NULL.

  If successful, this function sets *ppValue to point to a protected sqlite3_value object containing the iVal'th value from the vector of new row values stored as part of the UPDATE or INSERT change and returns SQLITE_OK. If the change is an UPDATE and does not include a new value for the requested column, *ppValue is set to NULL and SQLITE_OK returned. The name of the function comes from the fact that this is similar to the "new.*" columns available to update or delete triggers.

  If some other error occurs (e.g. an OOM condition), an SQLite error code is returned and *ppValue is set to NULL.

  ## Advance A Changeset Iterator

  >     int sqlite3changeset_next(sqlite3_changeset_iter *pIter);

  This function may only be used with iterators created by the function sqlite3changeset_start(). If it is called on an iterator passed to a conflict-handler callback by sqlite3changeset_apply(), SQLITE_MISUSE is returned and the call has no effect.

  Immediately after an iterator is created by sqlite3changeset_start(), it does not point to any change in the changeset. Assuming the changeset is not empty, the first call to this function advances the iterator to point to the first change in the changeset. Each subsequent call advances the iterator to point to the next change in the changeset (if any). If no error occurs and the iterator points to a valid change after a call to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned. Otherwise, if all changes in the changeset have already been visited, SQLITE_DONE is returned.

  If an error occurs, an SQLite error code is returned. Possible error codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or SQLITE_NOMEM.

  ## Obtain old.* Values From A Changeset Iterator

  >     int sqlite3changeset_old(
  >       sqlite3_changeset_iter *pIter,  /* Changeset iterator */
  >       int iVal,                       /* Column number */
  >       sqlite3_value **ppValue         /* OUT: Old value (or NULL pointer) */
  >     );

  The pIter argument passed to this function may either be an iterator passed to a conflict-handler by sqlite3changeset_apply(), or an iterator created by sqlite3changeset_start(). In the latter case, the most recent call to sqlite3changeset_next() must have returned SQLITE_ROW. Furthermore, it may only be called if the type of change that the iterator currently points to is either SQLITE_DELETE or SQLITE_UPDATE. Otherwise, this function returns SQLITE_MISUSE and sets *ppValue to NULL.

  Argument iVal must be greater than or equal to 0, and less than the number of columns in the table affected by the current change. Otherwise, SQLITE_RANGE is returned and *ppValue is set to NULL.

  If successful, this function sets *ppValue to point to a protected sqlite3_value object containing the iVal'th value from the vector of original row values stored as part of the UPDATE or DELETE change and returns SQLITE_OK. The name of the function comes from the fact that this is similar to the "old.*" columns available to update or delete triggers.

  If some other error occurs (e.g. an OOM condition), an SQLite error code is returned and *ppValue is set to NULL.

  ## Obtain The Current Operation From A Changeset Iterator

  >     int sqlite3changeset_op(
  >       sqlite3_changeset_iter *pIter,  /* Iterator object */
  >       const char **pzTab,             /* OUT: Pointer to table name */
  >       int *pnCol,                     /* OUT: Number of columns in table */
  >       int *pOp,                       /* OUT: SQLITE_INSERT, DELETE or UPDATE */
  >       int *pbIndirect                 /* OUT: True for an 'indirect' change */
  >     );

  The pIter argument passed to this function may either be an iterator passed to a conflict-handler by sqlite3changeset_apply(), or an iterator created by sqlite3changeset_start(). In the latter case, the most recent call to sqlite3changeset_next() must have returned SQLITE_ROW. If this is not the case, this function returns SQLITE_MISUSE.

  Arguments pOp, pnCol and pzTab may not be NULL. Upon return, three outputs are set through these pointers:

  *pOp is set to one of SQLITE_INSERT, SQLITE_DELETE or SQLITE_UPDATE, depending on the type of change that the iterator currently points to;

  *pnCol is set to the number of columns in the table affected by the change; and

  *pzTab is set to point to a nul-terminated utf-8 encoded string containing the name of the table affected by the current change. The buffer remains valid until either sqlite3changeset_next() is called on the iterator or until the conflict-handler function returns.

  If pbIndirect is not NULL, then *pbIndirect is set to true (1) if the change is an indirect change, or false (0) otherwise. See the documentation for sqlite3session_indirect() for a description of direct and indirect changes.

  If no error occurs, SQLITE_OK is returned. If an error does occur, an SQLite error code is returned. The values of the output variables may not be trusted in this case.

  ## Obtain The Primary Key Definition Of A Table

  >     int sqlite3changeset_pk(
  >       sqlite3_changeset_iter *pIter,  /* Iterator object */
  >       unsigned char **pabPK,          /* OUT: Array of boolean - true for PK cols */
  >       int *pnCol                      /* OUT: Number of entries in output array */
  >     );

  For each modified table, a changeset includes the following:

  - The number of columns in the table, and
  - Which of those columns make up the tables PRIMARY KEY.

  This function is used to find which columns comprise the PRIMARY KEY of the table modified by the change that iterator pIter currently points to. If successful, *pabPK is set to point to an array of nCol entries, where nCol is the number of columns in the table. Elements of *pabPK are set to 0x01 if the corresponding column is part of the tables primary key, or 0x00 if it is not.

  If argument pnCol is not NULL, then *pnCol is set to the number of columns in the table.

  If this function is called when the iterator does not point to a valid entry, SQLITE_MISUSE is returned and the output variables zeroed. Otherwise, SQLITE_OK is returned and the output variables populated as described above.

  ## Upgrade the Schema of a Changeset/Patchset

  >     int sqlite3changeset_upgrade(
  >       sqlite3 *db,
  >       const char *zDb,
  >       int nIn, const void *pIn,       /* Input changeset */
  >       int *pnOut, void **ppOut        /* OUT: Inverse of input */
  >     );

  ## Configure a changeset rebaser object.

  >     int sqlite3rebaser_configure(
  >       sqlite3_rebaser*,
  >       int nRebase, const void *pRebase
  >     );

  Important: This interface is experimental and is subject to change without notice.

  Configure the changeset rebaser object to rebase changesets according to the conflict resolutions described by buffer pRebase (size nRebase bytes), which must have been obtained from a previous call to sqlite3changeset_apply_v2().

  ## Create a changeset rebaser object.

  >     int sqlite3rebaser_create(sqlite3_rebaser **ppNew);

  Important: This interface is experimental and is subject to change without notice.

  Allocate a new changeset rebaser object. If successful, set (*ppNew) to point to the new object and return SQLITE_OK. Otherwise, if an error occurs, return an SQLite error code (e.g. SQLITE_NOMEM) and set (*ppNew) to NULL.

  ## Delete a changeset rebaser object.

  >     void sqlite3rebaser_delete(sqlite3_rebaser *p);

  Important: This interface is experimental and is subject to change without notice.

  Delete the changeset rebaser object and all associated resources. There should be one call to this function for each successful invocation of sqlite3rebaser_create().

  ## Rebase a changeset

  >     int sqlite3rebaser_rebase(
  >       sqlite3_rebaser*,
  >       int nIn, const void *pIn,
  >       int *pnOut, void **ppOut
  >     );

  Important: This interface is experimental and is subject to change without notice.

  Argument pIn must point to a buffer containing a changeset nIn bytes in size. This function allocates and populates a buffer with a copy of the changeset rebased according to the configuration of the rebaser object passed as the first argument. If successful, (*ppOut) is set to point to the new buffer containing the rebased changeset and (*pnOut) to its size in bytes and SQLITE_OK returned. It is the responsibility of the caller to eventually free the new buffer using sqlite3_free(). Otherwise, if an error occurs, (*ppOut) and (*pnOut) are set to zero and an SQLite error code returned.

  ## Attach A Table To A Session Object

  >     int sqlite3session_attach(
  >       sqlite3_session *pSession,      /* Session object */
  >       const char *zTab                /* Table name */
  >     );

  If argument zTab is not NULL, then it is the name of a table to attach to the session object passed as the first argument. All subsequent changes made to the table while the session object is enabled will be recorded. See documentation for sqlite3session_changeset() for further details.

  Or, if argument zTab is NULL, then changes are recorded for all tables in the database. If additional tables are added to the database (by executing "CREATE TABLE" statements) after this call is made, changes for the new tables are also recorded.

  Changes can only be recorded for tables that have a PRIMARY KEY explicitly defined as part of their CREATE TABLE statement. It does not matter if the PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY KEY may consist of a single column, or may be a composite key.

  It is not an error if the named table does not exist in the database. Nor is it an error if the named table does not have a PRIMARY KEY. However, no changes will be recorded in either of these scenarios.

  Changes are not recorded for individual rows that have NULL values stored in one or more of their PRIMARY KEY columns.

  SQLITE_OK is returned if the call completes without error. Or, if an error occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.

  ### Special sqlite_stat1 Handling

  As of SQLite version 3.22.0, the "sqlite_stat1" table is an exception to some of the rules above. In SQLite, the schema of sqlite_stat1 is:

             CREATE TABLE sqlite_stat1(tbl,idx,stat)

  Even though sqlite_stat1 does not have a PRIMARY KEY, changes are recorded for it as if the PRIMARY KEY is (tbl,idx). Additionally, changes are recorded for rows for which (idx IS NULL) is true. However, for such rows a zero-length blob (SQL value X'') is stored in the changeset or patchset instead of a NULL value. This allows such changesets to be manipulated by legacy implementations of sqlite3changeset_invert(), concat() and similar.

  The sqlite3changeset_apply() function automatically converts the zero-length blob back to a NULL value when updating the sqlite_stat1 table. However, if the application calls sqlite3changeset_new(), sqlite3changeset_old() or sqlite3changeset_conflict on a changeset iterator directly (including on a changeset iterator passed to a conflict-handler callback) then the X'' value is returned. The application must translate X'' to NULL itself if required.

  Legacy (older than 3.22.0) versions of the sessions module cannot capture changes made to the sqlite_stat1 table. Legacy versions of the sqlite3changeset_apply() function silently ignore any modifications to the sqlite_stat1 table that are part of a changeset or patchset.

  ## Generate A Changeset From A Session Object

  >     int sqlite3session_changeset(
  >       sqlite3_session *pSession,      /* Session object */
  >       int *pnChangeset,               /* OUT: Size of buffer at *ppChangeset */
  >       void **ppChangeset              /* OUT: Buffer containing changeset */
  >     );

  Obtain a changeset containing changes to the tables attached to the session object passed as the first argument. If successful, set *ppChangeset to point to a buffer containing the changeset and *pnChangeset to the size of the changeset in bytes before returning SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to zero and return an SQLite error code.

  A changeset consists of zero or more INSERT, UPDATE and/or DELETE changes, each representing a change to a single row of an attached table. An INSERT change contains the values of each field of a new database row. A DELETE contains the original values of each field of a deleted database row. An UPDATE change contains the original values of each field of an updated database row along with the updated values for each updated non-primary-key column. It is not possible for an UPDATE change to represent a change that modifies the values of primary key columns. If such a change is made, it is represented in a changeset as a DELETE followed by an INSERT.

  Changes are not recorded for rows that have NULL values stored in one or more of their PRIMARY KEY columns. If such a row is inserted or deleted, no corresponding change is present in the changesets returned by this function. If an existing row with one or more NULL values stored in PRIMARY KEY columns is updated so that all PRIMARY KEY columns are non-NULL, only an INSERT is appears in the changeset. Similarly, if an existing row with non-NULL PRIMARY KEY values is updated so that one or more of its PRIMARY KEY columns are set to NULL, the resulting changeset contains a DELETE change only.

  The contents of a changeset may be traversed using an iterator created using the sqlite3changeset_start() API. A changeset may be applied to a database with a compatible schema using the sqlite3changeset_apply() API.

  Within a changeset generated by this function, all changes related to a single table are grouped together. In other words, when iterating through a changeset or when applying a changeset to a database, all changes related to a single table are processed before moving on to the next table. Tables are sorted in the same order in which they were attached (or auto-attached) to the sqlite3_session object. The order in which the changes related to a single table are stored is undefined.

  Following a successful call to this function, it is the responsibility of the caller to eventually free the buffer that *ppChangeset points to using sqlite3_free().

  ### Changeset Generation

  Once a table has been attached to a session object, the session object records the primary key values of all new rows inserted into the table. It also records the original primary key and other column values of any deleted or updated rows. For each unique primary key value, data is only recorded once - the first time a row with said primary key is inserted, updated or deleted in the lifetime of the session.

  There is one exception to the previous paragraph: when a row is inserted, updated or deleted, if one or more of its primary key columns contain a NULL value, no record of the change is made.

  The session object therefore accumulates two types of records - those that consist of primary key values only (created when the user inserts a new record) and those that consist of the primary key values and the original values of other table columns (created when the users deletes or updates a record).

  When this function is called, the requested changeset is created using both the accumulated records and the current contents of the database file. Specifically:

  - For each record generated by an insert, the database is queried for a row with a matching primary key. If one is found, an INSERT change is added to the changeset. If no such row is found, no change is added to the changeset.

  - For each record generated by an update or delete, the database is queried for a row with a matching primary key. If such a row is found and one or more of the non-primary key fields have been modified from their original values, an UPDATE change is added to the changeset. Or, if no such row is found in the table, a DELETE change is added to the changeset. If there is a row with a matching primary key in the database, but all fields contain their original values, no change is added to the changeset.

  This means, amongst other things, that if a row is inserted and then later deleted while a session object is active, neither the insert nor the delete will be present in the changeset. Or if a row is deleted and then later a row with the same primary key values inserted while a session object is active, the resulting changeset will contain an UPDATE change instead of a DELETE and an INSERT.

  When a session object is disabled (see the sqlite3session_enable() API), it does not accumulate records when rows are inserted, updated or deleted. This may appear to have some counter-intuitive effects if a single row is written to more than once during a session. For example, if a row is inserted while a session object is enabled, then later deleted while the same session object is disabled, no INSERT record will appear in the changeset, even though the delete took place while the session was disabled. Or, if one field of a row is updated while a session is disabled, and another field of the same row is updated while the session is enabled, the resulting changeset will contain an UPDATE change that updates both fields.

  ## Return An Upper-limit For The Size Of The Changeset

  >     sqlite3_int64 sqlite3session_changeset_size(sqlite3_session *pSession);

  By default, this function always returns 0. For it to return a useful result, the sqlite3_session object must have been configured to enable this API using sqlite3session_object_config() with the SQLITE_SESSION_OBJCONFIG_SIZE verb.

  When enabled, this function returns an upper limit, in bytes, for the size of the changeset that might be produced if sqlite3session_changeset() were called. The final changeset size might be equal to or smaller than the size in bytes returned by this function.

  ## Configure global parameters

  >     int sqlite3session_config(int op, void *pArg);

  The sqlite3session_config() interface is used to make global configuration changes to the sessions module in order to tune it to the specific needs of the application.

  The sqlite3session_config() interface is not threadsafe. If it is invoked while any other thread is inside any other sessions method then the results are undefined. Furthermore, if it is invoked after any sessions related objects have been created, the results are also undefined.

  The first argument to the sqlite3session_config() function must be one of the SQLITE_SESSION_CONFIG_XXX constants defined below. The interpretation of the (void*) value passed as the second parameter and the effect of calling this function depends on the value of the first parameter.

  SQLITE_SESSION_CONFIG_STRMSIZE
    By default, the sessions module streaming interfaces attempt to input and output data in approximately 1 KiB chunks. This operand may be used to set and query the value of this configuration setting. The pointer passed as the second argument must point to a value of type (int). If this value is greater than 0, it is used as the new streaming data chunk size for both input and output. Before returning, the (int) value pointed to by pArg is set to the final value of the streaming interface chunk size.

  This function returns SQLITE_OK if successful, or an SQLite error code otherwise.

  ## Create A New Session Object

  >     int sqlite3session_create(
  >       sqlite3 *db,                    /* Database handle */
  >       const char *zDb,                /* Name of db (e.g. "main") */
  >       sqlite3_session **ppSession     /* OUT: New session object */
  >     );

  Create a new session object attached to database handle db. If successful, a pointer to the new object is written to *ppSession and SQLITE_OK is returned. If an error occurs, *ppSession is set to NULL and an SQLite error code (e.g. SQLITE_NOMEM) is returned.

  It is possible to create multiple session objects attached to a single database handle.

  Session objects created using this function should be deleted using the sqlite3session_delete() function before the database handle that they are attached to is itself closed. If the database handle is closed before the session object is deleted, then the results of calling any session module function, including sqlite3session_delete() on the session object are undefined.

  Because the session module uses the sqlite3_preupdate_hook() API, it is not possible for an application to register a pre-update hook on a database handle that has one or more session objects attached. Nor is it possible to create a session object attached to a database handle for which a pre-update hook is already defined. The results of attempting either of these things are undefined.

  The session object will be used to create changesets for tables in database zDb, where zDb is either "main", or "temp", or the name of an attached database. It is not an error if database zDb is not attached to the database when the session object is created.

  ## Delete A Session Object

  >     void sqlite3session_delete(sqlite3_session *pSession);

  Delete a session object previously allocated using sqlite3session_create(). Once a session object has been deleted, the results of attempting to use pSession with any other session module function are undefined.

  Session objects must be deleted before the database handle to which they are attached is closed. Refer to the documentation for sqlite3session_create() for details.

  ## Load The Difference Between Tables Into A Session

  >     int sqlite3session_diff(
  >       sqlite3_session *pSession,
  >       const char *zFromDb,
  >       const char *zTbl,
  >       char **pzErrMsg
  >     );

  If it is not already attached to the session object passed as the first argument, this function attaches table zTbl in the same manner as the sqlite3session_attach() function. If zTbl does not exist, or if it does not have a primary key, this function is a no-op (but does not return an error).

  Argument zFromDb must be the name of a database ("main", "temp" etc.) attached to the same database handle as the session object that contains a table compatible with the table attached to the session by this function. A table is considered compatible if it:

  - Has the same name,
  - Has the same set of columns declared in the same order, and
  - Has the same PRIMARY KEY definition.

  If the tables are not compatible, SQLITE_SCHEMA is returned. If the tables are compatible but do not have any PRIMARY KEY columns, it is not an error but no changes are added to the session object. As with other session APIs, tables without PRIMARY KEYs are simply ignored.

  This function adds a set of changes to the session object that could be used to update the table in database zFrom (call this the "from-table") so that its content is the same as the table attached to the session object (call this the "to-table"). Specifically:

  - For each row (primary key) that exists in the to-table but not in the from-table, an INSERT record is added to the session object.

  - For each row (primary key) that exists in the to-table but not in the from-table, a DELETE record is added to the session object.

  - For each row (primary key) that exists in both tables, but features different non-PK values in each, an UPDATE record is added to the session.

  To clarify, if this function is called and then a changeset constructed using sqlite3session_changeset(), then after applying that changeset to database zFrom the contents of the two compatible tables would be identical.

  It an error if database zFrom does not exist or does not contain the required compatible table.

  If the operation is successful, SQLITE_OK is returned. Otherwise, an SQLite error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg may be set to point to a buffer containing an English language error message. It is the responsibility of the caller to free this buffer using sqlite3_free().

  ## Enable Or Disable A Session Object

  >     int sqlite3session_enable(sqlite3_session *pSession, int bEnable);

  Enable or disable the recording of changes by a session object. When enabled, a session object records changes made to the database. When disabled - it does not. A newly created session object is enabled. Refer to the documentation for sqlite3session_changeset() for further details regarding how enabling and disabling a session object affects the eventual changesets.

  Passing zero to this function disables the session. Passing a value greater than zero enables it. Passing a value less than zero is a no-op, and may be used to query the current state of the session.

  The return value indicates the final state of the session object: 0 if the session is disabled, or 1 if it is enabled.

  ## Set Or Clear the Indirect Change Flag

  >     int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);

  Each change recorded by a session object is marked as either direct or indirect. A change is marked as indirect if either:

  - The session object "indirect" flag is set when the change is made, or
  - The change is made by an SQL trigger or foreign key action instead of directly as a result of a users SQL statement.

  If a single row is affected by more than one operation within a session, then the change is considered indirect if all operations meet the criteria for an indirect change above, or direct otherwise.

  This function is used to set, clear or query the session object indirect flag. If the second argument passed to this function is zero, then the indirect flag is cleared. If it is greater than zero, the indirect flag is set. Passing a value less than zero does not modify the current value of the indirect flag, and may be used to query the current state of the indirect flag for the specified session object.

  The return value indicates the final state of the indirect flag: 0 if it is clear, or 1 if it is set.

  ## Test if a changeset has recorded any changes.

  >     int sqlite3session_isempty(sqlite3_session *pSession);

  Return non-zero if no changes to attached tables have been recorded by the session object passed as the first argument. Otherwise, if one or more changes have been recorded, return zero.

  Even if this function returns zero, it is possible that calling sqlite3session_changeset() on the session handle may still return a changeset that contains no changes. This can happen when a row in an attached table is modified and then later on the original values are restored. However, if this function returns non-zero, then it is guaranteed that a call to sqlite3session_changeset() will return a changeset containing zero changes.

  ## Query for the amount of heap memory used by a session object.

  >     sqlite3_int64 sqlite3session_memory_used(sqlite3_session *pSession);

  This API returns the total amount of heap memory in bytes currently used by the session object passed as the only argument.

  ## Configure a Session Object

  >     int sqlite3session_object_config(sqlite3_session*, int op, void *pArg);

  This method is used to configure a session object after it has been created. At present the only valid values for the second parameter are SQLITE_SESSION_OBJCONFIG_SIZE and SQLITE_SESSION_OBJCONFIG_ROWID.

  ## Generate A Patchset From A Session Object

  >     int sqlite3session_patchset(
  >       sqlite3_session *pSession,      /* Session object */
  >       int *pnPatchset,                /* OUT: Size of buffer at *ppPatchset */
  >       void **ppPatchset               /* OUT: Buffer containing patchset */
  >     );

  The differences between a patchset and a changeset are that:

  - DELETE records consist of the primary key fields only. The original values of other fields are omitted.
  - The original values of any modified fields are omitted from UPDATE records.

  A patchset blob may be used with up to date versions of all sqlite3changeset_xxx API functions except for sqlite3changeset_invert(), which returns SQLITE_CORRUPT if it is passed a patchset. Similarly, attempting to use a patchset blob with old versions of the sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.

  Because the non-primary key "old.*" fields are omitted, no SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset is passed to the sqlite3changeset_apply() API. Other conflict types work in the same way as for changesets.

  Changes within a patchset are ordered in the same way as for changesets generated by the sqlite3session_changeset() function (i.e. all changes for a single table are grouped together, tables appear in the order in which they were attached to the session object).

  ## Set a table filter on a Session Object.

  >     void sqlite3session_table_filter(
  >       sqlite3_session *pSession,      /* Session object */
  >       int(*xFilter)(
  >         void *pCtx,                   /* Copy of third arg to _filter_table() */
  >         const char *zTab              /* Table name */
  >       ),
  >       void *pCtx                      /* First argument passed to xFilter */
  >     );

  The second argument (xFilter) is the "filter callback". For changes to rows in tables that are not attached to the Session object, the filter is called to determine whether changes to the table's rows should be tracked or not. If xFilter returns 0, changes are not tracked. Note that once a table is attached, xFilter will not be called again.

  ## Flags for sqlite3changeset_apply_v2

  >     #define SQLITE_CHANGESETAPPLY_NOSAVEPOINT   0x0001
  >     #define SQLITE_CHANGESETAPPLY_INVERT        0x0002
  >     #define SQLITE_CHANGESETAPPLY_IGNORENOOP    0x0004
  >     #define SQLITE_CHANGESETAPPLY_FKNOACTION    0x0008

  The following flags may passed via the 9th parameter to sqlite3changeset_apply_v2 and sqlite3changeset_apply_v2_strm:

  SQLITE_CHANGESETAPPLY_NOSAVEPOINT
    Usually, the sessions module encloses all operations performed by a single call to apply_v2() or apply_v2_strm() in a SAVEPOINT. The SAVEPOINT is committed if the changeset or patchset is successfully applied, or rolled back if an error occurs. Specifying this flag causes the sessions module to omit this savepoint. In this case, if the caller has an open transaction or savepoint when apply_v2() is called, it may revert the partially applied changeset by rolling it back.

  SQLITE_CHANGESETAPPLY_INVERT
    Invert the changeset before applying it. This is equivalent to inverting a changeset using sqlite3changeset_invert() before applying it. It is an error to specify this flag with a patchset.

  SQLITE_CHANGESETAPPLY_IGNORENOOP
    Do not invoke the conflict handler callback for any changes that would not actually modify the database even if they were applied. Specifically, this means that the conflict handler is not invoked for:
    - a delete change if the row being deleted cannot be found,
    - an update change if the modified fields are already set to their new values in the conflicting row, or
    - an insert change if all fields of the conflicting row match the row being inserted.

  SQLITE_CHANGESETAPPLY_FKNOACTION
    If this flag it set, then all foreign key constraints in the target database behave as if they were declared with "ON UPDATE NO ACTION ON DELETE NO ACTION", even if they are actually CASCADE, RESTRICT, SET NULL or SET DEFAULT.

    ## Constants Returned By The Conflict Handler

    >     #define SQLITE_CHANGESET_OMIT       0
    >     #define SQLITE_CHANGESET_REPLACE    1
    >     #define SQLITE_CHANGESET_ABORT      2

    A conflict handler callback must return one of the following three values.

    SQLITE_CHANGESET_OMIT
      If a conflict handler returns this value no special action is taken. The change that caused the conflict is not applied. The session module continues to the next change in the changeset.

    SQLITE_CHANGESET_REPLACE
      This value may only be returned if the second argument to the conflict handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this is not the case, any changes applied so far are rolled back and the call to sqlite3changeset_apply() returns SQLITE_MISUSE.

      If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict handler, then the conflicting row is either updated or deleted, depending on the type of change.

      If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_CONFLICT conflict handler, then the conflicting row is removed from the database and a second attempt to apply the change is made. If this second attempt fails, the original row is restored to the database before continuing.

    SQLITE_CHANGESET_ABORT
      If this value is returned, any changes applied so far are rolled back and the call to sqlite3changeset_apply() returns SQLITE_ABORT.

    ## Constants Passed To The Conflict Handler

    >     #define SQLITE_CHANGESET_DATA        1
    >     #define SQLITE_CHANGESET_NOTFOUND    2
    >     #define SQLITE_CHANGESET_CONFLICT    3
    >     #define SQLITE_CHANGESET_CONSTRAINT  4
    >     #define SQLITE_CHANGESET_FOREIGN_KEY 5

    Values that may be passed as the second argument to a conflict-handler.

    SQLITE_CHANGESET_DATA
      The conflict handler is invoked with CHANGESET_DATA as the second argument when processing a DELETE or UPDATE change if a row with the required PRIMARY KEY fields is present in the database, but one or more other (non primary-key) fields modified by the update do not contain the expected "before" values.

      The conflicting row, in this case, is the database row with the matching primary key.

    SQLITE_CHANGESET_NOTFOUND
      The conflict handler is invoked with CHANGESET_NOTFOUND as the second argument when processing a DELETE or UPDATE change if a row with the required PRIMARY KEY fields is not present in the database.

      There is no conflicting row in this case. The results of invoking the sqlite3changeset_conflict() API are undefined.

    SQLITE_CHANGESET_CONFLICT
      CHANGESET_CONFLICT is passed as the second argument to the conflict handler while processing an INSERT change if the operation would result in duplicate primary key values.

      The conflicting row in this case is the database row with the matching primary key.

    SQLITE_CHANGESET_FOREIGN_KEY
      If foreign key handling is enabled, and applying a changeset leaves the database in a state containing foreign key violations, the conflict handler is invoked with CHANGESET_FOREIGN_KEY as the second argument exactly once before the changeset is committed. If the conflict handler returns CHANGESET_OMIT, the changes, including those that caused the foreign key constraint violation, are committed. Or, if it returns CHANGESET_ABORT, the changeset is rolled back.

      No current or conflicting row information is provided. The only function it is possible to call on the supplied sqlite3_changeset_iter handle is sqlite3changeset_fk_conflicts().

    SQLITE_CHANGESET_CONSTRAINT
      If any other constraint violation occurs while applying a change (i.e. a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is invoked with CHANGESET_CONSTRAINT as the second argument.

      There is no conflicting row in this case. The results of invoking the sqlite3changeset_conflict() API are undefined.

    ## Options for sqlite3session_object_config

    >     #define SQLITE_SESSION_OBJCONFIG_SIZE  1
    >     #define SQLITE_SESSION_OBJCONFIG_ROWID 2

    The following values may passed as the the 2nd parameter to sqlite3session_object_config().

  SQLITE_SESSION_OBJCONFIG_SIZE
    This option is used to set, clear or query the flag that enables the sqlite3session_changeset_size() API. Because it imposes some computational overhead, this API is disabled by default. Argument pArg must point to a value of type (int). If the value is initially 0, then the sqlite3session_changeset_size() API is disabled. If it is greater than 0, then the same API is enabled. Or, if the initial value is less than zero, no change is made. In all cases the (int) variable is set to 1 if the sqlite3session_changeset_size() API is enabled following the current call, or 0 otherwise.

    It is an error (SQLITE_MISUSE) to attempt to modify this setting after the first table has been attached to the session object.

  SQLITE_SESSION_OBJCONFIG_ROWID
    This option is used to set, clear or query the flag that enables collection of data for tables with no explicit PRIMARY KEY.

    Normally, tables with no explicit PRIMARY KEY are simply ignored by the sessions module. However, if this flag is set, it behaves as if such tables have a column "_rowid_ INTEGER PRIMARY KEY" inserted as their leftmost columns.

    It is an error (SQLITE_MISUSE) to attempt to modify this setting after the first table has been attached to the session object.

    ## Streaming Versions of API functions.

    >     int sqlite3changeset_apply_strm(
    >       sqlite3 *db,                    /* Apply change to "main" db of this handle */
    >       int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
    >       void *pIn,                                          /* First arg for xInput */
    >       int(*xFilter)(
    >         void *pCtx,                   /* Copy of sixth arg to _apply() */
    >         const char *zTab              /* Table name */
    >       ),
    >       int(*xConflict)(
    >         void *pCtx,                   /* Copy of sixth arg to _apply() */
    >         int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
    >         sqlite3_changeset_iter *p     /* Handle describing change and conflict */
    >       ),
    >       void *pCtx                      /* First argument passed to xConflict */
    >     );
    >     int sqlite3changeset_apply_v2_strm(
    >       sqlite3 *db,                    /* Apply change to "main" db of this handle */
    >       int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
    >       void *pIn,                                          /* First arg for xInput */
    >       int(*xFilter)(
    >         void *pCtx,                   /* Copy of sixth arg to _apply() */
    >         const char *zTab              /* Table name */
    >       ),
    >       int(*xConflict)(
    >         void *pCtx,                   /* Copy of sixth arg to _apply() */
    >         int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
    >         sqlite3_changeset_iter *p     /* Handle describing change and conflict */
    >       ),
    >       void *pCtx,                     /* First argument passed to xConflict */
    >       void **ppRebase, int *pnRebase,
    >       int flags
    >     );
    >     int sqlite3changeset_concat_strm(
    >       int (*xInputA)(void *pIn, void *pData, int *pnData),
    >       void *pInA,
    >       int (*xInputB)(void *pIn, void *pData, int *pnData),
    >       void *pInB,
    >       int (*xOutput)(void *pOut, const void *pData, int nData),
    >       void *pOut
    >     );
    >     int sqlite3changeset_invert_strm(
    >       int (*xInput)(void *pIn, void *pData, int *pnData),
    >       void *pIn,
    >       int (*xOutput)(void *pOut, const void *pData, int nData),
    >       void *pOut
    >     );
    >     int sqlite3changeset_start_strm(
    >       sqlite3_changeset_iter **pp,
    >       int (*xInput)(void *pIn, void *pData, int *pnData),
    >       void *pIn
    >     );
    >     int sqlite3changeset_start_v2_strm(
    >       sqlite3_changeset_iter **pp,
    >       int (*xInput)(void *pIn, void *pData, int *pnData),
    >       void *pIn,
    >       int flags
    >     );
    >     int sqlite3session_changeset_strm(
    >       sqlite3_session *pSession,
    >       int (*xOutput)(void *pOut, const void *pData, int nData),
    >       void *pOut
    >     );
    >     int sqlite3session_patchset_strm(
    >       sqlite3_session *pSession,
    >       int (*xOutput)(void *pOut, const void *pData, int nData),
    >       void *pOut
    >     );
    >     int sqlite3changegroup_add_strm(sqlite3_changegroup*,
    >         int (*xInput)(void *pIn, void *pData, int *pnData),
    >         void *pIn
    >     );
    >     int sqlite3changegroup_output_strm(sqlite3_changegroup*,
    >         int (*xOutput)(void *pOut, const void *pData, int nData),
    >         void *pOut
    >     );
    >     int sqlite3rebaser_rebase_strm(
    >       sqlite3_rebaser *pRebaser,
    >       int (*xInput)(void *pIn, void *pData, int *pnData),
    >       void *pIn,
    >       int (*xOutput)(void *pOut, const void *pData, int nData),
    >       void *pOut
    >     );

    The six streaming API xxx_strm() functions serve similar purposes to the corresponding non-streaming API functions:

    Streaming function | Non-streaming equivalent
    --- | ---
    sqlite3changeset_apply_strm | sqlite3changeset_apply
    sqlite3changeset_apply_strm_v2 | sqlite3changeset_apply_v2
    sqlite3changeset_concat_strm | sqlite3changeset_concat
    sqlite3changeset_invert_strm | sqlite3changeset_invert
    sqlite3changeset_start_strm | sqlite3changeset_start
    sqlite3session_changeset_strm | sqlite3session_changeset
    sqlite3session_patchset_strm | sqlite3session_patchset

    Non-streaming functions that accept changesets (or patchsets) as input require that the entire changeset be stored in a single buffer in memory. Similarly, those that return a changeset or patchset do so by returning a pointer to a single large buffer allocated using sqlite3_malloc(). Normally this is convenient. However, if an application running in a low-memory environment is required to handle very large changesets, the large contiguous memory allocations required can become onerous.

    In order to avoid this problem, instead of a single large buffer, input is passed to a streaming API functions by way of a callback function that the sessions module invokes to incrementally request input data as it is required. In all cases, a pair of API function parameters such as

               int nChangeset,
               void *pChangeset,

    Is replaced by:

               int (*xInput)(void *pIn, void *pData, int *pnData),
               void *pIn,

    Each time the xInput callback is invoked by the sessions module, the first argument passed is a copy of the supplied pIn context pointer. The second argument, pData, points to a buffer (*pnData) bytes in size. Assuming no error occurs the xInput method should copy up to (*pnData) bytes of data into the buffer and set (*pnData) to the actual number of bytes copied before returning SQLITE_OK. If the input is completely exhausted, (*pnData) should be set to zero to indicate this. Or, if an error occurs, an SQLite error code should be returned. In all cases, if an xInput callback returns an error, all processing is abandoned and the streaming API function returns a copy of the error code to the caller.

    In the case of sqlite3changeset_start_strm(), the xInput callback may be invoked by the sessions module at any point during the lifetime of the iterator. If such an xInput callback returns an error, the iterator enters an error state, whereby all subsequent calls to iterator functions immediately fail with the same error code as returned by xInput.

    Similarly, streaming API functions that return changesets (or patchsets) return them in chunks by way of a callback function instead of via a pointer to a single large buffer. In this case, a pair of parameters such as:

               int *pnChangeset,
               void **ppChangeset,

    Is replaced by:

               int (*xOutput)(void *pOut, const void *pData, int nData),
               void *pOut

    The xOutput callback is invoked zero or more times to return data to the application. The first parameter passed to each call is a copy of the pOut pointer supplied by the application. The second parameter, pData, points to a buffer nData bytes in size containing the chunk of output data being returned. If the xOutput callback successfully processes the supplied data, it should return SQLITE_OK to indicate success. Otherwise, it should return some other SQLite error code. In this case processing is immediately abandoned and the streaming API function returns a copy of the xOutput error code to the application.

    The sessions module never invokes an xOutput callback with the third parameter set to a value less than or equal to zero. Other than this, no guarantees are made as to the size of the chunks of data returned.

    ## Apply A Changeset To A Database

    >     int sqlite3changeset_apply(
    >       sqlite3 *db,                    /* Apply change to "main" db of this handle */
    >       int nChangeset,                 /* Size of changeset in bytes */
    >       void *pChangeset,               /* Changeset blob */
    >       int(*xFilter)(
    >         void *pCtx,                   /* Copy of sixth arg to _apply() */
    >         const char *zTab              /* Table name */
    >       ),
    >       int(*xConflict)(
    >         void *pCtx,                   /* Copy of sixth arg to _apply() */
    >         int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
    >         sqlite3_changeset_iter *p     /* Handle describing change and conflict */
    >       ),
    >       void *pCtx                      /* First argument passed to xConflict */
    >     );
    >     int sqlite3changeset_apply_v2(
    >       sqlite3 *db,                    /* Apply change to "main" db of this handle */
    >       int nChangeset,                 /* Size of changeset in bytes */
    >       void *pChangeset,               /* Changeset blob */
    >       int(*xFilter)(
    >         void *pCtx,                   /* Copy of sixth arg to _apply() */
    >         const char *zTab              /* Table name */
    >       ),
    >       int(*xConflict)(
    >         void *pCtx,                   /* Copy of sixth arg to _apply() */
    >         int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
    >         sqlite3_changeset_iter *p     /* Handle describing change and conflict */
    >       ),
    >       void *pCtx,                     /* First argument passed to xConflict */
    >       void **ppRebase, int *pnRebase, /* OUT: Rebase data */
    >       int flags                       /* SESSION_CHANGESETAPPLY_* flags */
    >     );

    Apply a changeset or patchset to a database. These functions attempt to update the "main" database attached to handle db with the changes found in the changeset passed via the second and third arguments.

    The fourth argument (xFilter) passed to these functions is the "filter callback". If it is not NULL, then for each table affected by at least one change in the changeset, the filter callback is invoked with the table name as the second argument, and a copy of the context pointer passed as the sixth argument as the first. If the "filter callback" returns zero, then no attempt is made to apply any changes to the table. Otherwise, if the return value is non-zero or the xFilter argument to is NULL, all changes related to the table are attempted.

    For each table that is not excluded by the filter callback, this function tests that the target database contains a compatible table. A table is considered compatible if all of the following are true:

    - The table has the same name as the name recorded in the changeset, and
    - The table has at least as many columns as recorded in the changeset, and
    - The table has primary key columns in the same position as recorded in the changeset.

    If there is no compatible table, it is not an error, but none of the changes associated with the table are applied. A warning message is issued via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most one such warning is issued for each table in the changeset.

    For each change for which there is a compatible table, an attempt is made to modify the table contents according to the UPDATE, INSERT or DELETE change. If a change cannot be applied cleanly, the conflict handler function passed as the fifth argument to sqlite3changeset_apply() may be invoked. A description of exactly when the conflict handler is invoked for each type of change is below.

    Unlike the xFilter argument, xConflict may not be passed NULL. The results of passing anything other than a valid function pointer as the xConflict argument are undefined.

    Each time the conflict handler function is invoked, it must return one of SQLITE_CHANGESET_OMIT, SQLITE_CHANGESET_ABORT or SQLITE_CHANGESET_REPLACE. SQLITE_CHANGESET_REPLACE may only be returned if the second argument passed to the conflict handler is either SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler returns an illegal value, any changes already made are rolled back and the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different actions are taken by sqlite3changeset_apply() depending on the value returned by each invocation of the conflict-handler function. Refer to the documentation for the three available return values for details.

    DELETE Changes
      For each DELETE change, the function checks if the target database contains a row with the same primary key value (or values) as the original row values stored in the changeset. If it does, and the values stored in all non-primary key columns also match the values stored in the changeset the row is deleted from the target database.

      If a row with matching primary key values is found, but one or more of the non-primary key fields contains a value different from the original row value stored in the changeset, the conflict-handler function is invoked with SQLITE_CHANGESET_DATA as the second argument. If the database table has more columns than are recorded in the changeset, only the values of those non-primary key fields are compared against the current database contents - any trailing database table columns are ignored.

      If no row with matching primary key values is found in the database, the conflict-handler function is invoked with SQLITE_CHANGESET_NOTFOUND passed as the second argument.

      If the DELETE operation is attempted, but SQLite returns SQLITE_CONSTRAINT (which can only happen if a foreign key constraint is violated), the conflict-handler function is invoked with SQLITE_CHANGESET_CONSTRAINT passed as the second argument. This includes the case where the DELETE operation is attempted because an earlier call to the conflict handler function returned SQLITE_CHANGESET_REPLACE.

    INSERT Changes
      For each INSERT change, an attempt is made to insert the new row into the database. If the changeset row contains fewer fields than the database table, the trailing fields are populated with their default values.

      If the attempt to insert the row fails because the database already contains a row with the same primary key values, the conflict handler function is invoked with the second argument set to SQLITE_CHANGESET_CONFLICT.

      If the attempt to insert the row fails because of some other constraint violation (e.g. NOT NULL or UNIQUE), the conflict handler function is invoked with the second argument set to SQLITE_CHANGESET_CONSTRAINT. This includes the case where the INSERT operation is re-attempted because an earlier call to the conflict handler function returned SQLITE_CHANGESET_REPLACE.

    UPDATE Changes
      For each UPDATE change, the function checks if the target database contains a row with the same primary key value (or values) as the original row values stored in the changeset. If it does, and the values stored in all modified non-primary key columns also match the values stored in the changeset the row is updated within the target database.

      If a row with matching primary key values is found, but one or more of the modified non-primary key fields contains a value different from an original row value stored in the changeset, the conflict-handler function is invoked with SQLITE_CHANGESET_DATA as the second argument. Since UPDATE changes only contain values for non-primary key fields that are to be modified, only those fields need to match the original values to avoid the SQLITE_CHANGESET_DATA conflict-handler callback.

      If no row with matching primary key values is found in the database, the conflict-handler function is invoked with SQLITE_CHANGESET_NOTFOUND passed as the second argument.

      If the UPDATE operation is attempted, but SQLite returns SQLITE_CONSTRAINT, the conflict-handler function is invoked with SQLITE_CHANGESET_CONSTRAINT passed as the second argument. This includes the case where the UPDATE operation is attempted after an earlier call to the conflict handler function returned SQLITE_CHANGESET_REPLACE.

    It is safe to execute SQL statements, including those that write to the table that the callback related to, from within the xConflict callback. This can be used to further customize the application's conflict resolution strategy.

    All changes made by these functions are enclosed in a savepoint transaction. If any other error (aside from a constraint failure when attempting to write to the target database) occurs, then the savepoint transaction is rolled back, restoring the target database to its original state, and an SQLite error code returned.

    If the output parameters (ppRebase) and (pnRebase) are non-NULL and the input is a changeset (not a patchset), then sqlite3changeset_apply_v2() may set (*ppRebase) to point to a "rebase" that may be used with the sqlite3_rebaser APIs buffer before returning. In this case (*pnRebase) is set to the size of the buffer in bytes. It is the responsibility of the caller to eventually free any such buffer using sqlite3_free(). The buffer is only allocated and populated if one or more conflicts were encountered while applying the patchset. See comments surrounding the sqlite3_rebaser APIs for further details.

    The behavior of sqlite3changeset_apply_v2() and its streaming equivalent may be modified by passing a combination of supported flags as the 9th parameter.

    Note that the sqlite3changeset_apply_v2() API is still experimental and therefore subject to change.

    ## Create An Iterator To Traverse A Changeset

    >     int sqlite3changeset_start(
    >       sqlite3_changeset_iter **pp,    /* OUT: New changeset iterator handle */
    >       int nChangeset,                 /* Size of changeset blob in bytes */
    >       void *pChangeset                /* Pointer to blob containing changeset */
    >     );
    >     int sqlite3changeset_start_v2(
    >       sqlite3_changeset_iter **pp,    /* OUT: New changeset iterator handle */
    >       int nChangeset,                 /* Size of changeset blob in bytes */
    >       void *pChangeset,               /* Pointer to blob containing changeset */
    >       int flags                       /* SESSION_CHANGESETSTART_* flags */
    >     );

    Create an iterator used to iterate through the contents of a changeset. If successful, *pp is set to point to the iterator handle and SQLITE_OK is returned. Otherwise, if an error occurs, *pp is set to zero and an SQLite error code is returned.

    The following functions can be used to advance and query a changeset iterator created by this function:

    - sqlite3changeset_next()
    - sqlite3changeset_op()
    - sqlite3changeset_new()
    - sqlite3changeset_old()

    It is the responsibility of the caller to eventually destroy the iterator by passing it to sqlite3changeset_finalize(). The buffer containing the changeset (pChangeset) must remain valid until after the iterator is destroyed.

    Assuming the changeset blob was created by one of the sqlite3session_changeset(), sqlite3changeset_concat() or sqlite3changeset_invert() functions, all changes within the changeset that apply to a single table are grouped together. This means that when an application iterates through a changeset using an iterator created by this function, all changes that relate to a single table are visited consecutively. There is no chance that the iterator will visit a change the applies to table X, then one for table Y, and then later on visit another change for table X.

    The behavior of sqlite3changeset_start_v2() and its streaming equivalent may be modified by passing a combination of supported flags as the 4th parameter.

    Note that the sqlite3changeset_start_v2() API is still experimental and therefore subject to change.