fnott(5)

NAME
fnott - configuration file

DESCRIPTION

fnott uses the standard unix configuration format, with section based key/value pairs. The default (global) section is unnamed (i.e. not prefixed with a [section]). However it can also be explicitly named [main], say if it needs to be reopened after any of the other sections.

fnott will search for a configuration file in the following locations, in this order:

•   XDG_CONFIG_HOME/fnott/fnott.ini (defaulting to
     ~/.config/fnott/fnott.ini if unset)
•   XDG_CONFIG_DIRS/fnott/fnott.ini (defaulting to
     /etc/xdg/fnott/fnott.ini if unset)

SECTION: default

  Global options

output
    The output to display notifications on. If left unspecified, the compositor will choose one for us.

    Note that if you do not specify an output, and the output chosen by the compositor is scaled, then each new notification will flash a low-res frame before re-rendering with the correct scale factor. This is because fnott has no way of knowing what the scale factor is until after the notification has been mapped (i.e. shown).

    Default: unspecified.

    In Sway, you can use swaymsg -t get_outputs to get a list of available outputs.

min-width
    Minimum notification width, in pixels. Default: 0.

max-width
    Maximum notification width, in pixels. 0 means unlimited. Note that fnott will automatically word-wrap the notification text if set to a non-zero value. Default: 0.

max-height
    Maximum notification height, in pixels. 0 means unlimited. Default: 0.

icon-theme
    Icon theme to use when a notification has requested an non-embedded icon. Default: hicolor.

max-icon-size
    Maximum icon size, in pixels. Icons larger than this will be scaled down. Default: 32.

stacking-order
    How to stack multiple notifications.

        •   bottom-up : oldest, highest priority furthest away from the anchor point.
        •   top-down: oldest, highest priority at the anchor point.

    Thus, if the notifications are anchored at the top, bottom-up will have the most recent notification in the upper corner, while the oldest notification is in the bottom of the stack.

    Default: bottom-up.

anchor
    Where notifications are positioned: top-left, top-right, bottom-left or bottom-right. Default: top-right.

edge-margin-vertical
    Vertical margin, in pixels, between the screen edge (top or bottom, depending on anchor pointer) and notifications. Default: 10.

edge-margin-horizontal
    Horizontal margin, in pixels, between the screen edge (left or right, depending on anchor pointer) and notifications. Default: 10.

notification-margin
    Margin between notifications. Default: 10.

selection-helper
    Command (and optionally arguments) to execute to display actions and let the user select an action to run.

    The utility should accept (action) entries to display on stdin (newline separated), and write the selected entry on stdout.

    It is strongly recommended that you enable selection-helper-uses-null-separator (see below), if your helper of choice supports it.

    Default: dmenu.

selection-helper-uses-null-separator
    Boolean. When enabled, the action strings passed to the selection helper will be NULL separated, instead of newline separated.

    Note that you may also have to adjust selection-helper, to ensure the selection helper parses the action strings correctly. For example, instead of fuzzel --dmenu, you would have to use fuzzel --dmenu0.

    Default: no.

play-sound
    Command to execute to play notification sounds. ${filename} will be expanded to the path to the audio file to play. Default: aplay ${filename}.

scaling-filter

    Which scaling filter to use when scaling non-SVG notification images.

    Possible values are:
    •   none
    •   nearest
    •   bilinear
    •   cubic
    •   lanczos3

    none is the fastest, but also looks the worst. lanczos3 produces the best result, but is also, by far, the slowest option.

    Default: lanczos3

  Per-urgency default options

These options can also be specified in an urgency section, in which case they override the values specified in the default section.

layer
    Layer on which notifications will appear: background, bottom, top or overlay. Default: top.

background
    Background color of the notification, in RGBA format. Default: 3f5f3fff.

border-color
    Border color of the notification, in RGBA format. Default: 909090ff.

border-size
    Border size, in pixels. Default: 1.

padding-vertical
    Vertical padding, in pixels, between the notification edge (top or bottom) and notification text. Default: 20.

padding-horizontal
    Horizontal padding, in pixels, between the notification edge (left or right) and notification text. Default: 20.

dpi-aware
    Boolean.

    When set to yes, fonts are sized using the monitor's DPI, making a font of a given size have the same physical size, regardless of monitor.

    In this mode, the monitor's scaling factor is ignored; doubling the scaling factor will not double the font size.

    When set to no, the monitor's DPI is ignored. The font is instead sized using the monitor's scaling factor; doubling the scaling factor does double the font size.

    Note that this option typically does not work with bitmap fonts, which only contains a pre-defined set of sizes, and cannot be dynamically scaled. Whichever size (of the available ones) that best matches the DPI or scaling factor, will be used.

    Also note that if the font size has been specified in pixels (:pixelsize=N, instead of :size=N), DPI scaling (dpi-aware=yes) will have no effect (the specified pixel size will be used as is). But, if the monitor's scaling factor is used to size the font (dpi-aware=no), the font's pixel size will be multiplied with the scaling factor.

    Default: no

title-font
    Font to use for the application title, in fontconfig format (see FONT FORMAT). Default: sans serif.

title-color
    Text color to use for the application title, in RGBA format. Default: ffffffff.

title-format
    Template string for the title portion of the notification (see FORMAT STRINGS). Default: <i>%a%A</i>.

summary-font
    Font to use for the summary, in fontconfig format (see FONT FORMAT). Default: sans serif.

summary-color
    Text color to use for the summary, in RGBA format. Default: ffffffff.

summary-format
    Template string for the summary portion of the notification (see FORMAT STRINGS). Default: <b>%s\n</b>.

body-font
    Font to use for the text body, in fontconfig format (see FONT FORMAT). Default: sans serif.

body-color
    Text color to use for the text body, in RGBA format. Default: ffffffff.

body-format
    Template string for the body portion of the notification (see FORMAT STRINGS). Default: %b.

progress-bar-height
    Height, in pixels, of progress bars (rendered when a notification has an int:value hint). Default: 20.

progress-bar-color
    Color, in RGBA format, of progress bars. Default: ffffffff.

max-timeout
    Time limit, in seconds, before notifications are automatically dismissed. Applications can provide their own timeout when they create a notification. This option can be used to limit that timeout. A value of 0 disables the limit. Default: 0.

default-timeout
    Time, in seconds, before notifications are automatically dismissed if the notifying application does not specify a timeout. A value of 0 disables the timeout. I.e. if the application does not provide a timeout, the notification is never automatically dismissed (unless max-timeout has been set). Default: 0.

idle-timeout
    Time, in seconds, that you must be idle to prevent any notification from being dismissed. A value of 0 disables the timeout. Default: 0.

sound-file
    Absolute path to audio file to play when a notification is received. If unset, no sound is played. Default: unset.

icon
    Icon to use when none is provided by the notifications themselves. Can be either an absolute path, or a name (without extension).

    In the latter case, it will be searched for in the selected icon theme, using the fallback rules defined by the XDG icon theme specification.

    Default: unset.

SECTION: low

This section allows you to override the options listed under per-urgency default options for low priority notifications.

By default, the following options are already overridden:

•   background: 2b2b2bff
•   title-color 888888ff
•   summary-color: 888888ff
•   body-color: 888888ff

SECTION: normal

This section allows you to override the options listed under per-urgency default options for normal priority notifications.

By default, the following options are already overridden: none.

SECTION: critical

This section allows you to override the options listed under per-urgency default options for critical priority notifications.

By default, the following options are already overridden:

•   background: 6c3333ff

FONT FORMAT

The font is specified in FontConfig syntax. That is, a colon-separated list of font name and font options.

Examples:
•   Dina:weight=bold:slant=italic
•   Courier New:size=12

FORMAT STRINGS

The title-format, summary-format and body-format options allow you to configure what to display for the corresponding portion of the notification.

They are strings with placeholders that are expanded with attributes from the notification:

•   %a application name
•   %s notification summary
•   %b notification body text
•   %A action indicator ('*' if actions are present, empty string otherwise)
•   %% a literal '%'
•   \n a literal newline

Also supported are the following markup tags:

•   <b> bold
•   <i> italic
•   <u> underline

SEE ALSO

fnott(1)