Isi

# Position and Size

Specifies the size and the position of the selected image, frame, or OLE object on a page.

Untuk mengakses fungsi ini...

#### From the menu bar:

Pilih tab Format - Gambar - Properti - Posisi dan Ukuran.

Pilih tab Format - Bingkai dan Objek - Properti - Posisi dan Ukuran.

Choose View - Styles - Frame Styles - open context menu New/Edit Style - Type tab.

Pilih tab Sisip - Bingkai - Bingkai - Posisi dan Ukuran.

#### From the context menu:

Choose Properties - Position and Size tab.

#### From the tabbed interface:

On the Image menu of the Image tab, choose Properties - Position and Size tab.

On the Object menu of the Object tab, choose Properties - Position and Size tab.

#### From the keyboard:

F4, then Position and Size tab.

#### From the status bar:

Click on the Selected Object Size area, Position and Size tab.

## Ukuran

### Lebar

Masukkan lebar yang Anda inginkan untuk objek yang dipilih.

### Relatif

Menghitung lebar dari objek yang dipilih sebagai persentase dari lebar area teks halaman.

### Hubungan relatif lebar

Tentukan apa maksud lebar 100%: area teks (tidak termasuk batasan) atau seluruh halaman (termasuk batasan).

### Tinggi

Masukkan tinggi yang Anda inginkan untuk objek yang dipilih.

### Relatif

Hitung tinggi dari objek yang dipilih sebagai persentase dari tinggi area halaman teks.

### Relasi tinggi relatif

Tentukan apa maksud tinggi 100%: area teks (tidak termasuk batasan) atau seluruh halaman (termasuk batasan).

### Jaga rasio

Mempertahankan rasio tinggi dan lebar ketika Anda mengubah pengaturan lebar atau tinggi.

### Ukuran Asli

Atur ulang pengaturan ukuran objek yang dipilih ke nilai aslinya.

Daftar berkas tak tersedia bagi paket ini.

### Otomatis

Secara otomatis menyesuaikan lebar atau tinggi dari sebuah bingkai untuk mencocokkan isi bingkai. Jika anda ingin, anda dapat menentukan lebar minimum atau tinggi minimum dari bingkai.

Opsi Otomatis hanya tersedia ketika Anda memilih bingkai.

## Tambat

Tentukan pilihan penambatan untuk objek atau bingkai yang dipilih. Pilihan penambat tidak tersedia ketika anda membuka dialog dari jendela Gaya.

### Ke halaman

Tambat pilihan ke halaman saat ini.

### Ke paragraf

Tambat pilihan ke paragraf saat ini.

### Ke karakter

Anchors the selection to a character. This is the default for images.

### Sebagai karakter

Penambatan pilihan sebagai karakter. Ketinggian garis saat ini diubah ukurannya agar sesuai dengan ketinggian pilihan.

## Posisi

Tenentukan lokasi objek yang dipilih pada halaman aktif.

### Horizontal

Select the horizontal alignment option for the object. The selection specifies the position of the object relative to the region or reference line selected in the to dropdown list. This option is not available if anchor as character is selected.

### oleh

Masukan jumlah ruang untuk meninggalkan antara tepi kiri dari objek yang dipilih dan titik acuan yang anda pilih didalamkotak.Pilihan ini hanya tersedia jika anda memilih "Dari Kiri" dikotakHorizontal.

### ke

Select the region or reference line for the selected horizontal alignment option. The following options are available:

- Paragraph area: the object is positioned considering the whole width available for the paragraph, including indent spaces.

- Paragraph text area: the object is positioned considering the whole width available for text in the paragraph, excluding indent spaces.

- Left of paragraph text area: the object is positioned in the region from the left text boundary to the first character on the left edge of the anchored paragraph text. For multicolumn paragraphs, the region is defined in relation to the column where the anchor is located. When the anchor is not located in the first column, then the region starts at the left column margin.

- Right of paragraph text area: the object is positioned in the region from the last character on the right edge of anchored paragraph text to the right text boundary. For multicolumn paragraphs, the region is defined in relation to the column where the anchor is located. When the anchor is not located in the last column then the region ends at the right column margin.

- Left of page text area: the object is positioned in the region between the left edge of the page and the left margin plus any left page padding.

- Right of page text area: the object is positioned in the region between the right edge of the page and the right margin plus any right page padding.

- Entire page: the object is positioned considering the whole width of the page, from the left to the right page borders.

- Page text area: the object is positioned considering the whole width available for text in the page, from the left to the right page margins.

- Character: the object is positioned considering the horizontal space used by the character.

Be aware that the set of options available depend on the Anchor settings. Therefore, not all options listed above may be shown due to the current Anchor choice.

You can see the result of the alignments options that you select in the Preview box.

### Gan_da (Halaman genap kiri)

Membalik pengaturan penyelarasan garis mendatar saat ini di halaman genap.

Anda juga dapat menggunakancitraopsi flip untuk menyesuaikan tata letak objek pada halaman genap dan ganjil.

### Vertikal

Select the vertical alignment option for the object. The selection specifies the position of the object relative to the region or reference line selected in the to dropdown list.

You can see the result of the alignments options that you select in the Preview box.

### oleh

Enter the amount of space to leave from the top edge of the object to the region or reference line selected in the to dropdown list. This option is active only when the following combinations of Vertical and Anchor are selected. For these combinations, you can specify the amount of space to leave from:

Vertical | with Anchor
--- | ---
From top | Top edge of selected region. Positive values move the object down, negative values up. | To page, To paragraph, To character or To frame
From bottom | Selected reference line. Positive values move the object up, negative values down. | To character or As character

### ke

Select the region or reference line for the vertical alignment. The object can be positioned in relation to the following regions or reference lines:

- Margin: Depending on the anchoring type, the object is positioned considering the space between the top margin and the character ("To character" anchoring) or bottom edge of the paragraph ("To paragraph" anchoring) where the anchor is placed.

- Paragraph text area: the object is positioned considering the height of the paragraph where the anchor is placed.

- Entire page: the object is positioned considering the full page height, from top to bottom page borders.

- Page text area: the object is positioned from the bottom edge of the top padding area to the top edge of the bottom padding area.

- Character: available only for "To character" or "As character" anchoring, the object is positioned relative to the region between the top border and bottom border of the character immediately before where the anchor is placed. A character formatted with a common border with other characters or objects uses the region for the highest character or object in the common border.

- Line of text: available only for "To character" anchoring, the object is positioned considering the height of the line of text where the anchor is placed.

- Baseline: available only for "As character" anchoring, this option will position the object considering the text baseline over which all characters are placed.

- Row: available only for "As character" anchoring, this option will position the object considering the height of the row where the anchor is placed.

- Entire frame: available only for "To frame" anchoring, the outer edges of the frame.

- Frame text area: available only for "To frame" anchoring, the text area of the frame.

Be aware that the set of options available depend on the Anchor settings. Therefore, not all options listed above may be shown due to the current Anchor choice.

Jika penambat anda sebuah objek untuk bingkai dengan tinggi tetap, hanya opsi perataan "Bawah" dan "Tengah" yang tersedia.

### Jaga tetap di dalam batas teks

Menyimpan objek yang dipilih di dalam batasan tata letak teks tempat objek tersebut ditambat. Untuk menempatkan objek yang dipilih di mana saja dalam dokumen Anda jangan pilih opsi ini.

Secara baku, opsi Pertahankan di dalam batas teks dipilih ketika Anda membuka dokumen yang diciptakan dalam versi Writer yang lebih tua dari OpenOffice.org 2.0. Namum, opsi ini tidak dipilih ketika Anda membuat dokumen atau ketika Anda membuka dokumen dalam format Microsoft Word (*.doc).

### Allow frame to split across pages

Allows the frame to continue on a next page when the content of the frame doesn't fit the current page anymore. Content around the frame will be wrapped on the last page.

By default, the Allow frame to split across pages option is disabled when you create a Text Frame in Writer. However, this option is selected when you open a document in Microsoft Word formats, containing floating tables.

### Pratinjau Ruas

Displays a preview of the current selection.

Persegi hijau mewakili objek yang dipilih dan persegi panjang merah mewakili titik acuan perataan. Jika tambat objek anda sebagai karakter, persegi panjang acuan berubah menjadi garis merah.

Topik Terkait

Format - Tambat

Format - Align Text