Position and Size (Text Box and Shape)

Isi

# Posisi dan Ukuran

Mengubah ukuran atau memindahkan objek yang dipilih.

Untuk mengakses fungsi ini...

Click on textbox or shape to select, then...

Choose Format - Text Box and Shape - Object - Object and Shape - Position and Size - Position and Size tab.

Open context menu for selected object - choose Position and Size - Position and Size tab.

Position and Size menu icon

Press F4 after selection to open the tab directly.

## Posisi

Tentukan lokasi objek yang dipilih pada halaman.

Coordinate axes start at column A - row 1.

X-coordinates are negative in a "right-to-left" table.

Coordinates are relative to the origin. Left/top corner of the page content area is the initial default.

### Posisi X

Enter the horizontal coordinate where the selected base point should be placed.

### Posisi Y

Enter the vertical coordinate where the selected base point should be placed.

### Titik basis

The selected base point will be moved to the specified Position Y and Position X.

The base point always returns to the left/top corner on reopening the dialog.

## Ukuran

Specify the size of the selected object.

Resize the selected object to the chosen width and height relative to the selected base point.

### Lebar

Masukkan sebuah lebar untuk objek terpilih.

### Tinggi

Masukkan ketinggian untuk objek yang dipilih.

### Jaga rasio

Maintains the width and height ratio when changing the width or height setting in the dialog box.

Only for shapes.

### Tambat

Tentukan pilihan penambatan untuk objek atau bingkai yang dipilih. Pilihan penambat tidak tersedia ketika anda membuka dialog dari jendela Gaya.

#### Ke halaman

Tambat pilihan ke halaman saat ini.

#### Ke paragraf

Tambat pilihan ke paragraf saat ini.

#### Ke karakter

Anchors the selection to a character. This is the default for images.

#### Sebagai karakter

Penambatan pilihan sebagai karakter. Ketinggian garis saat ini diubah ukurannya agar sesuai dengan ketinggian pilihan.

### Ke bingkai

Anchors the selection to the surrounding frame.

### Titik basis

Klik sebuah point basis pada kisi, dan masukkan ukuran baru dimesi untuk objek terpilih pada kotakLebar dan Tinggi.

The selected base point remains fixed in the grid. The object is resized relative to that point.

## Diproteksi

### Posisi

Prevents changes to the position and size of the selected object.

### Ukuran

Mencegah anda dari mengubah ukuran objek.

### Posisi

Tenentukan lokasi objek yang dipilih pada halaman aktif.

#### Horizontal

Select the horizontal alignment option for the object. The selection specifies the position of the object relative to the region or reference line selected in the to dropdown list. This option is not available if anchor as character is selected.

#### oleh

Masukan jumlah ruang untuk meninggalkan antara tepi kiri dari objek yang dipilih dan titik acuan yang anda pilih didalamkotak.Pilihan ini hanya tersedia jika anda memilih "Dari Kiri" dikotakHorizontal.

#### ke

Select the region or reference line for the selected horizontal alignment option. The following options are available:

- Paragraph area: the object is positioned considering the whole width available for the paragraph, including indent spaces.

- Paragraph text area: the object is positioned considering the whole width available for text in the paragraph, excluding indent spaces.

- Left of paragraph text area: the object is positioned in the region from the left text boundary to the first character on the left edge of the anchored paragraph text. For multicolumn paragraphs, the region is defined in relation to the column where the anchor is located. When the anchor is not located in the first column, then the region starts at the left column margin.

- Right of paragraph text area: the object is positioned in the region from the last character on the right edge of anchored paragraph text to the right text boundary. For multicolumn paragraphs, the region is defined in relation to the column where the anchor is located. When the anchor is not located in the last column then the region ends at the right column margin.

- Left of page text area: the object is positioned in the region between the left edge of the page and the left margin plus any left page padding.

- Right of page text area: the object is positioned in the region between the right edge of the page and the right margin plus any right page padding.

- Entire page: the object is positioned considering the whole width of the page, from the left to the right page borders.

- Page text area: from the inner edge of the left page padding to the inner edge of the right page padding.

- Character: the object is positioned considering the horizontal space used by the character.

Be aware that the set of options available depend on the Anchor settings. Therefore, not all options listed above may be shown due to the current Anchor choice.

Anda dapat melihat hasil dari opsi perataan yang Anda pilih di kotak Pratinjau.

#### Gan_da (Halaman genap kiri)

Membalik pengaturan penyelarasan garis mendatar saat ini di halaman genap.

#### Vertikal

Select the vertical alignment option for the object. The selection specifies the position of the object relative to the region or reference line selected in the to dropdown list.

Anda dapat melihat hasil dari opsi perataan yang Anda pilih di kotak Pratinjau.

#### oleh

Enter the amount of space to leave from the top edge of the object to the region or reference line selected in the to dropdown list. This option is active only when the following combinations of Vertical and Anchor are selected. For these combinations, you can specify the amount of space to leave from:

Tegak | with Anchor
--- | ---
From top | Top edge of selected region. Positive values move the object down, negative values up. | To page, To paragraph, To character or To frame
From bottom | Selected reference line. Positive values move the object up, negative values down. | To character or As character

#### ke

Select the region or reference line for the vertical alignment. The object can be positioned in relation to the following regions or reference lines:

- Margin: Depending on the anchoring type, the object is positioned considering the space between the top margin and the character ("To character" anchoring) or bottom edge of the paragraph ("To paragraph" anchoring) where the anchor is placed.

- Paragraph text area: the object is positioned considering the beginning of the paragraph where the anchor is placed.

- Entire page: the object is positioned considering the full page height, from top to bottom page borders.

- Page text area: the object is positioned from the bottom edge of the top padding area to the top edge of the bottom padding area.

- Below page text area: the bottom edge of the page text area to the bottom edge of the page.

- Above page text area: the top edge of the page to the top of the page text area.

- Character: available only for "To character" or "As character" anchoring, the object is positioned relative to the region between the top border and bottom border of the character immediately before where the anchor is placed. A character formatted with a common border with other characters or objects uses the region for the highest character or object in the common border.

- Line of text: available only for "To character" anchoring, the object is positioned considering the height of the line of text where the anchor is placed.

- Baseline: available only for "As character" anchoring, this option will position the object considering the text baseline over which all characters are placed.

- Row: available only for "As character" anchoring, this option will position the object considering the height of the row where the anchor is placed.

- Entire frame: available only for "To frame" anchoring, the outer edges of the frame.

- Frame text area: available only for "To frame" anchoring, the text area of the frame.

Be aware that the set of options available depend on the Anchor settings. Therefore, not all options listed above may be shown due to the current Anchor choice.

Jika penambat anda sebuah objek untuk bingkai dengan tinggi tetap, hanya opsi perataan "Bawah" dan "Tengah" yang tersedia.

#### Jaga tetap di dalam batas teks

Menyimpan objek yang dipilih di dalam batasan tata letak teks tempat objek tersebut ditambat. Untuk menempatkan objek yang dipilih di mana saja dalam dokumen Anda jangan pilih opsi ini.

Secara baku, opsi Pertahankan di dalam batas teks dipilih ketika Anda membuka dokumen yang diciptakan dalam versi Writer yang lebih tua dari OpenOffice.org 2.0. Namum, opsi ini tidak dipilih ketika Anda membuat dokumen atau ketika Anda membuka dokumen dalam format Microsoft Word (*.doc).

## Sesuaikan

Tentukan, jika ukuran objek gambar harus disesuaikan agar sesuai dengan ukuran teks yang dimasukkan.

### Sesuaikan lebar dengan teks

Memperluas lebar objek ke lebar teks, jika objek lebih kecil dari teks.

### Sesuaikan tinggi dengan teks

Perluas ketinggian objek ke ketinggian teks, jika objek lebih kecil dari teks.

Adapt is only available for Text Boxes. To adapt Shapes to text, use Format - Object - Text.

Adapt is only available for Text Boxes. To adapt Shapes to text, use Format - Text.

Topik Terkait

Positioning Objects

Rotating Objects

Rotasi